20230109测试ToyBrick的RK3588开发板运行Buildroot的V20220811版本

20230109测试ToyBrick的RK3588开发板运行Buildroot的V20220811版本
2023/1/9 14:25

开发板：Toybrick的TB-RK3588X开发板
SDK：RK3588_LINUX_20220811\rk3588-linux-20220811.tar.gz_06

H:\BaiduNetdiskDownload\RK3588_LINUX_20220811
rk3588-linux-20220811.tar.gz_06

编译要点，
SDK没有内置dl
Z:\toybrick_rk3588s-linux-20220811\buildroot\dl

刷机效果图：

 

 

测试OK
ADB连接：

 

 

有GUI，但是不能直接测试WIFI和BT。【还需要进一步研究】

 

 

 

 

 

参考资料：
百度搜索：buildroot BT 配对
https://blog.csdn.net/d_xueliang/article/details/73823790
buildroot使用详解

cn.bing.com
buildroot bt测试
https://blog.csdn.net/m0_38139533/article/details/116277646
rockchip buildroot wifibt

https://wiki.t-firefly.com/zh_CN/Firefly-Linux-Guide/manual_buildroot.html
1. Buildroot 使用手册

[BEGIN] 2023/1/9 13:51:35
DDR Version V1.06 20220224
LPDDR4X, 1800MHz
channel[0] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
channel[1] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
channel[2] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
channel[3] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
change to F1: 528MHz
change to F2: 1068MHz
change to F3: 1560MHz
change to F0: 1800MHz
out
U-Boot SPL board init
U-Boot SPL 2017.09-gbdb740d4da-220216 #cjh (Feb 24 2022 - 03:15:33)
Failed to set cpub01
Failed to set cpub23
unknown raw ID phN
unrecognized JEDEC id bytes: 00, 00, 00
Trying to boot from MMC2
MMC: no card present
mmc_init: -123, time 0
spl: mmc init failed with error: -123
Trying to boot from MMC1
Trying fit image at 0x4000 sector
## Verified-boot: 0
## Checking atf-1 0x00040000 ... sha256(4e081b1b07...) + OK
## Checking uboot 0x00200000 ... sha256(98b460fd72...) + OK
## Checking fdt 0x00320428 ... sha256(c07f4a4d71...) + OK
## Checking atf-2 0x000f0000 ... sha256(6a00298af8...) + OK
## Checking atf-3 0xff100000 ... sha256(19762d10e3...) + OK
## Checking atf-4 0xff009000 ... sha256(2301cf73be...) + OK
## Checking optee 0x08400000 ... sha256(603cfbd25d...) + OK
Jumping to U-Boot(0x00200000) via ARM Trusted Firmware(0x00040000)
Total: 85.831 ms

INFO:    Preloader serial: 2
NOTICE:  BL31: v2.3():v2.3-331-g7380d9813:derrick.huang
NOTICE:  BL31: Built : 19:33:36, Mar 24 2022
INFO:    GICv3 without legacy support detected.
INFO:    ARM GICv3 driver initialized in EL3
INFO:    system boots from cpu-hwid-0
INFO:    idle_st=0x21fff, pd_st=0x11fff9
INFO:    dfs DDR fsp_params[0].freq_mhz= 1800MHz
INFO:    dfs DDR fsp_params[1].freq_mhz= 528MHz
INFO:    dfs DDR fsp_params[2].freq_mhz= 1068MHz
INFO:    dfs DDR fsp_params[3].freq_mhz= 1560MHz
INFO:    BL31: Initialising Exception Handling Framework
INFO:    BL31: Initializing runtime services
INFO:    BL31: Initializing BL32
INFO:    hdmirx_handler: dma not on, ret
I/TC: 
I/TC: OP-TEE version: 3.13.0-639-g8e053a881-dev #hisping.lin (gcc version 10.2.1 20201103 (GNU Toolchain for the A-profile Architecture 10.2-2020.11 (arm-10.16))) #2 Mon Mar 14 09:09:01 CST 2022 aarch64
I/TC: Primary CPU initializing
I/TC: Primary CPU switching to normal world boot
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0x200000
INFO:    SPSR = 0x3c9

U-Boot 2017.09 (Jan 09 2023 - 10:47:47 +0800)

Model: Rockchip RK3588 Evaluation Board
PreSerial: 2, raw, 0xfeb50000
DRAM:  7.7 GiB
Sysmem: init
Relocation Offset: edb57000
Relocation fdt: eb9fa108 - eb9fece0
CR: M/C/I
Using default environment

DDR Version V1.07 20220412
LPDDR4X, 2112MHz
channel[0] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
channel[1] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
channel[2] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
channel[3] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
change to F1: 528MHz
change to F2: 1068MHz
change to F3: 1560MHz
change to F0: 2112MHz
out
U-Boot SPL board init
U-Boot SPL 2017.09-gc060f28d70-220414 #zyf (Apr 18 2022 - 18:13:34)
Failed to set cpub01
Failed to set cpub23
unknown raw ID phN
unrecognized JEDEC id bytes: 00, 00, 00
Trying to boot from MMC2
MMC: no card present
mmc_init: -123, time 1
spl: mmc init failed with error: -123
Trying to boot from MMC1
Trying fit image at 0x4000 sector
## Verified-boot: 0
## Checking atf-1 0x00040000 ... sha256(5ae6932916...) + OK
## Checking uboot 0x00200000 ... sha256(3c90ad01c7...) + OK
## Checking fdt 0x00327600 ... sha256(c07f4a4d71...) + OK
## Checking atf-2 0x000f0000 ... sha256(c00c7fd75b...) + OK
## Checking atf-3 0xff100000 ... sha256(71c3a5841b...) + OK
## Checking atf-4 0xff001000 ... sha256(2301cf73be...) + OK
## Checking optee 0x08400000 ... sha256(4ed9cd20b5...) + OK
Jumping to U-Boot(0x00200000) via ARM Trusted Firmware(0x00040000)
Total: 116.747 ms

INFO:    Preloader serial: 2
NOTICE:  BL31: v2.3():v2.3-384-g45c8fcb44:derrick.huang
NOTICE:  BL31: Built : 15:14:04, Jun 18 2022
INFO:    ext 32k is valid
INFO:    GICv3 without legacy support detected.
INFO:    ARM GICv3 driver initialized in EL3
INFO:    system boots from cpu-hwid-0
INFO:    idle_st=0x21fff, pd_st=0x11fff9, repair_st=0xfff70001
INFO:    dfs DDR fsp_params[0].freq_mhz= 2112MHz
INFO:    dfs DDR fsp_params[1].freq_mhz= 528MHz
INFO:    dfs DDR fsp_params[2].freq_mhz= 1068MHz
INFO:    dfs DDR fsp_params[3].freq_mhz= 1560MHz
INFO:    BL31: Initialising Exception Handling Framework
INFO:    BL31: Initializing runtime services
INFO:    BL31: Initializing BL32
INFO:    hdmirx_handler: dma not on, ret
I/TC: 
I/TC: OP-TEE version: 3.13.0-645-g87d94c5ef8 #xb.wang (gcc version 10.2.1 20201103 (GNU Toolchain for the A-profile Architecture 10.2-2020.11 (arm-10.16))) #1 Tue Jun 14 10:44:31 CST 2022 aarch64
I/TC: Primary CPU initializing
I/TC: Primary CPU switching to normal world boot
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0x200000
INFO:    SPSR = 0x3c9

U-Boot 2017.09 (Jan 08 2023 - 18:33:24 +0800)

Model: Rockchip RK3588 Evaluation Board
PreSerial: 2, raw, 0xfeb50000
DRAM:  7.7 GiB
Sysmem: init
Relocation Offset: edb4f000
Relocation fdt: eb9fa2e8 - eb9fece8
CR: M/C/I
Using default environment

mmc@fe2c0000: 1, mmc@fe2e0000: 0
Bootdev(atags): mmc 0
MMC0: HS200, 200Mhz
PartType: EFI
DM: v2
boot mode: recovery (misc)
FIT: no signed, no conf required
DTB: rk-kernel.dtb
HASH(c): OK
Pre-reloc: vcc_mipicsi1
I2c0 speed: 100000Hz
vsel-gpios- not found!
en-gpios- not found!
vdd_cpu_big0_s0 675000 uV
vsel-gpios- not found!
en-gpios- not found!
vdd_cpu_big1_s0 675000 uV
I2c2 speed: 400000Hz
vsel-gpios- not found!
en-gpios- not found!
vdd_npu_s0 800000 uV
spi2: RK806: 2
ON=0x00, OFF=0x00
vdd_gpu_s0 750000 uV
vdd_cpu_lit_s0 750000 uV
vdd_log_s0 750000 uV
vdd_vdenc_s0 init 750000 uV
vdd_ddr_s0 850000 uV
Model: Rockchip RK3588 TOYBRICK X10 Board
CLK: (uboot. arm: enter 1008000 KHz, init 1008000 KHz, kernel 0N/A)
  b0pll 24000 KHz
  b1pll 24000 KHz
  lpll 24000 KHz
  v0pll 24000 KHz
  aupll 786431 KHz
  cpll 1500000 KHz
  gpll 1188000 KHz
  npll 850000 KHz
  ppll 1100000 KHz
  aclk_center_root 702000 KHz
  pclk_center_root 100000 KHz
  hclk_center_root 396000 KHz
  aclk_center_low_root 500000 KHz
  aclk_top_root 594000 KHz
  pclk_top_root 100000 KHz
  aclk_low_top_root 396000 KHz
Net:   eth0: ethernet@fe1b0000
Hit key to stop autoboot('CTRL+C'):  0 
ANDROID: reboot reason: "recovery"
optee api revision: 2.0
TEEC: Waring: Could not find security partition
Not AVB images, AVB skip
No valid android hdr
Android image load failed
Android boot failed, error -1.
## Booting FIT Image at 0xe7679cc0 with size 0x0417f600
Fdt Ramdisk skip relocation
## Loading kernel from FIT Image at e7679cc0 ...
   Using 'conf' configuration
## Verified-boot: 0
   Trying 'kernel' kernel subimage
     Description:  unavailable
     Type:         Kernel Image
     Compression:  uncompressed
     Data Start:   0xe76a22c0
     Data Size:    31035904 Bytes = 29.6 MiB
     Architecture: AArch64
     OS:           Linux
     Load Address: 0x00400000
     Entry Point:  0x00400000
     Hash algo:    sha256
     Hash value:   6e3d6585f1f05c533d5b233f06d52154658e547e73cbf57c75d9af7cce178ecf
   Verifying Hash Integrity ... sha256+ OK
## Loading ramdisk from FIT Image at e7679cc0 ...
   Using 'conf' configuration
   Trying 'ramdisk' ramdisk subimage
     Description:  unavailable
     Type:         RAMDisk Image
     Compression:  uncompressed
     Data Start:   0xe943b4c0
     Data Size:    37477611 Bytes = 35.7 MiB
     Architecture: AArch64
     OS:           Linux
     Load Address: 0x0a200000
     Entry Point:  unavailable
     Hash algo:    sha256
     Hash value:   6575b21f20be85e39d10195859b7c2142b8357eb50083ecc6d65beb051b896d9
   Verifying Hash Integrity ... sha256+ OK
   Loading ramdisk from 0xe943b4c0 to 0x0a200000
## Loading fdt from FIT Image at e7679cc0 ...
   Using 'conf' configuration
   Trying 'fdt' fdt subimage
     Description:  unavailable
     Type:         Flat Device Tree
     Compression:  uncompressed
     Data Start:   0xe767a4c0
     Data Size:    163034 Bytes = 159.2 KiB
     Architecture: AArch64
     Load Address: 0x0a100000
     Hash algo:    sha256
     Hash value:   7bd221e89cf62319742ab2cf1317346fb93be8bf32cdf3cd41e0f6be09cea7bd
   Verifying Hash Integrity ... sha256+ OK
   Loading fdt from 0x0a100000 to 0x0a100000
   Booting using the fdt blob at 0x0a100000
   Loading Kernel Image from 0xe76a22c0 to 0x00400000 ... OK
   kernel loaded at 0x00400000, end = 0x02199200
  'reserved-memory' cma: addr=10000000 size=8000000
   Using Device Tree in place at 000000000a100000, end 000000000a12acd9
Adding bank: 0x00200000 - 0x08400000 (size: 0x08200000)
Adding bank: 0x09400000 - 0xf0000000 (size: 0xe6c00000)
Adding bank: 0x100000000 - 0x200000000 (size: 0x100000000)
Total: 848.866 ms

Starting kernel ...

[    0.965782] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
[    0.965804] Linux version 5.10.66 (rootroot@rootroot-adol-ADOLBOOK-I421UAY-ADOL14UA) (aarch64-none-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture 10.3-2021.07 (arm-10.29)) 10.3.1 20210621, GNU ld (GNU Toolchain for the A-profile Architecture 10.3-2021.07 (arm-10.29)) 2.36.1.20210621) #1 SMP Sun Jan 8 18:46:14 CST 2023
[    0.976551] Machine model: Rockchip RK3588 TOYBRICK X10 Board
[    0.976621] earlycon: uart8250 at MMIO32 0x00000000feb50000 (options '')
[    0.981015] printk: bootconsole [uart8250] enabled
[    0.983940] efi: UEFI not found.
[    0.989938] OF: fdt: Reserved memory: failed to reserve memory for node 'drm-logo@00000000': base 0x0000000000000000, size 0 MiB
[    0.991014] OF: fdt: Reserved memory: failed to reserve memory for node 'drm-cubic-lut@00000000': base 0x0000000000000000, size 0 MiB
[    0.992166] Reserved memory: created CMA memory pool at 0x0000000010000000, size 128 MiB
[    0.992911] OF: reserved mem: initialized node cma, compatible id shared-dma-pool
[    1.130303] Zone ranges:
[    1.130551]   DMA      [mem 0x0000000000200000-0x00000000ffffffff]
[    1.131126]   DMA32    empty
[    1.131397]   Normal   [mem 0x0000000100000000-0x00000001ffffffff]
[    1.131970] Movable zone start for each node
[    1.132364] Early memory node ranges
[    1.132696]   node   0: [mem 0x0000000000200000-0x00000000083fffff]
[    1.133274]   node   0: [mem 0x0000000009400000-0x00000000efffffff]
[    1.133854]   node   0: [mem 0x0000000100000000-0x00000001ffffffff]
[    1.134434] Initmem setup node 0 [mem 0x0000000000200000-0x00000001ffffffff]
[    1.179480] psci: probing for conduit method from DT.
[    1.179955] psci: PSCIv1.1 detected in firmware.
[    1.180382] psci: Using standard PSCI v0.2 function IDs
[    1.180866] psci: Trusted OS migration not required
[    1.181319] psci: SMC Calling Convention v1.2
[    1.182086] percpu: Embedded 30 pages/cpu s83816 r8192 d30872 u122880
[    1.182877] Detected VIPT I-cache on CPU0
[    1.183289] CPU features: detected: GIC system register CPU interface
[    1.183883] CPU features: detected: Virtualization Host Extensions
[    1.184458] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    1.185105] alternatives: patching kernel code
[    1.185798] Built 1 zonelists, mobility grouping on.  Total pages: 1995336
[    1.186435] Kernel command line: storagemedia=emmc androidboot.storagemedia=emmc androidboot.mode=normal  androidboot.verifiedbootstate=orange rw rootwait earlycon=uart8250,mmio32,0xfeb50000 console=ttyFIQ0 irqchip.gicv3_pseudo_nmi=0 root=PARTUUID=614e0000-0000
[    1.189634] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    1.190744] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    1.191466] mem auto-init: stack:off, heap alloc:off, heap free:off
[    1.198048] software IO TLB: mapped [mem 0x00000000ec000000-0x00000000f0000000] (64MB)
[    1.265571] Memory: 7686492K/8108032K available (15040K kernel code, 3172K rwdata, 5704K rodata, 6272K init, 517K bss, 290468K reserved, 131072K cma-reserved)
[    1.267010] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    1.267644] ftrace: allocating 56951 entries in 223 pages
[    1.358354] ftrace: allocated 223 pages with 7 groups
[    1.359101] rcu: Hierarchical RCU implementation.
[    1.359540] rcu:     RCU event tracing is enabled.
[    1.359960]     Rude variant of Tasks RCU enabled.
[    1.360375] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[    1.366193] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    1.368887] GICv3: GIC: Using split EOI/Deactivate mode
[    1.369373] GICv3: 480 SPIs implemented
[    1.369729] GICv3: 0 Extended SPIs implemented
[    1.370169] GICv3: Distributor has no Range Selector support
[    1.370695] GICv3: 16 PPIs implemented
[    1.371083] GICv3: CPU0: found redistributor 0 region 0:0x00000000fe680000
[    1.371831] ITS [mem 0xfe640000-0xfe65ffff]
[    1.372266] ITS@0x00000000fe640000: allocated 8192 Devices @1001e0000 (indirect, esz 8, psz 64K, shr 0)
[    1.373152] ITS@0x00000000fe640000: allocated 32768 Interrupt Collections @1001f0000 (flat, esz 2, psz 64K, shr 0)
[    1.374108] ITS: using cache flushing for cmd queue
[    1.374591] ITS [mem 0xfe660000-0xfe67ffff]
[    1.375019] ITS@0x00000000fe660000: allocated 8192 Devices @100210000 (indirect, esz 8, psz 64K, shr 0)
[    1.375905] ITS@0x00000000fe660000: allocated 32768 Interrupt Collections @100220000 (flat, esz 2, psz 64K, shr 0)
[    1.376861] ITS: using cache flushing for cmd queue
[    1.377464] GICv3: using LPI property table @0x0000000100230000
[    1.378125] GIC: using cache flushing for LPI property table
[    1.378654] GICv3: CPU0: using allocated LPI pending table @0x0000000100240000
[    1.379481] random: get_random_bytes called from start_kernel+0x3dc/0x5c8 with crng_init=0
[    1.495314] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    1.496624] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    1.497609] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    1.499440] Console: colour dummy device 80x25
[    1.499873] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000)
[    1.500812] pid_max: default: 32768 minimum: 301
[    1.501365] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    1.502074] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    1.504365] rcu: Hierarchical SRCU implementation.
[    1.505616] Platform MSI: msi-controller@fe640000 domain created
[    1.506204] Platform MSI: msi-controller@fe660000 domain created
[    1.507043] PCI/MSI: /interrupt-controller@fe600000/msi-controller@fe640000 domain created
[    1.507820] PCI/MSI: /interrupt-controller@fe600000/msi-controller@fe660000 domain created
[    1.508694] EFI services will not be available.
[    1.509437] smp: Bringing up secondary CPUs ...
I/TC: Secondary CPU 1 initializing
I/TC: Secondary CPU 1 switching to normal world boot
I/TC: Secondary CPU 2 initializing
I/TC: Secondary CPU 2 switching to normal world boot
I/TC: Secondary CPU 3 initializing
I/TC: Secondary CPU 3 switching to normal world boot
I/TC: Secondary CPU 4 initializing
I/TC: Secondary CPU 4 switching to normal world boot
I/TC: Secondary CPU 5 initializing
I/TC: Secondary CPU 5 switching to normal world boot
I/TC: Secondary CPU 6 initializing
I/TC: Secondary CPU 6 switching to normal world boot
I/TC: Secondary CPU 7 initializing
I/TC: Secondary CPU 7 switching to normal world boot
[    1.511077] Detected VIPT I-cache on CPU1
[    1.511113] GICv3: CPU1: found redistributor 100 region 0:0x00000000fe6a0000
[    1.511131] GICv3: CPU1: using allocated LPI pending table @0x0000000100250000
[    1.511173] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
[    1.512441] Detected VIPT I-cache on CPU2
[    1.512469] GICv3: CPU2: found redistributor 200 region 0:0x00000000fe6c0000
[    1.512486] GICv3: CPU2: using allocated LPI pending table @0x0000000100260000
[    1.512525] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
[    1.513766] Detected VIPT I-cache on CPU3
[    1.513793] GICv3: CPU3: found redistributor 300 region 0:0x00000000fe6e0000
[    1.513810] GICv3: CPU3: using allocated LPI pending table @0x0000000100270000
[    1.513847] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
[    1.515087] CPU features: detected: Spectre-v4
[    1.515091] Detected PIPT I-cache on CPU4
[    1.515109] GICv3: CPU4: found redistributor 400 region 0:0x00000000fe700000
[    1.515120] GICv3: CPU4: using allocated LPI pending table @0x0000000100280000
[    1.515145] CPU4: Booted secondary processor 0x0000000400 [0x414fd0b0]
[    1.516353] Detected PIPT I-cache on CPU5
[    1.516372] GICv3: CPU5: found redistributor 500 region 0:0x00000000fe720000
[    1.516383] GICv3: CPU5: using allocated LPI pending table @0x0000000100290000
[    1.516409] CPU5: Booted secondary processor 0x0000000500 [0x414fd0b0]
[    1.517652] Detected PIPT I-cache on CPU6
[    1.517670] GICv3: CPU6: found redistributor 600 region 0:0x00000000fe740000
[    1.517681] GICv3: CPU6: using allocated LPI pending table @0x00000001002a0000
[    1.517707] CPU6: Booted secondary processor 0x0000000600 [0x414fd0b0]
[    1.518902] Detected PIPT I-cache on CPU7
[    1.518920] GICv3: CPU7: found redistributor 700 region 0:0x00000000fe760000
[    1.518931] GICv3: CPU7: using allocated LPI pending table @0x00000001002b0000
[    1.518957] CPU7: Booted secondary processor 0x0000000700 [0x414fd0b0]
[    1.519030] smp: Brought up 1 node, 8 CPUs
[    1.535581] SMP: Total of 8 processors activated.
[    1.536012] CPU features: detected: Privileged Access Never
[    1.536521] CPU features: detected: User Access Override
[    1.537007] CPU features: detected: 32-bit EL0 Support
[    1.537477] CPU features: detected: Common not Private translations
[    1.538057] CPU features: detected: RAS Extension Support
[    1.538550] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    1.539333] CPU features: detected: CRC32 instructions
[    1.539802] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    1.540438] CPU features: detected: RCpc load-acquire (LDAPR)
[    1.541046] CPU: All CPU(s) started at EL2
[    1.542775] devtmpfs: initialized
[    1.555126] Registered cp15_barrier emulation handler
[    1.555604] Registered setend emulation handler
[    1.556104] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    1.556992] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    1.559106] pinctrl core: initialized pinctrl subsystem
[    1.559879] DMI not present or invalid.
[    1.560355] NET: Registered protocol family 16
[    1.561728] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[    1.562491] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    1.563892] thermal_sys: Registered thermal governor 'fair_share'
[    1.563895] thermal_sys: Registered thermal governor 'step_wise'
[    1.564449] thermal_sys: Registered thermal governor 'user_space'
[    1.564994] thermal_sys: Registered thermal governor 'power_allocator'
[    1.565704] thermal thermal_zone1: power_allocator: sustainable_power will be estimated
[    1.567070] thermal thermal_zone2: power_allocator: sustainable_power will be estimated
[    1.567830] thermal thermal_zone3: power_allocator: sustainable_power will be estimated
[    1.568589] thermal thermal_zone4: power_allocator: sustainable_power will be estimated
[    1.569348] thermal thermal_zone5: power_allocator: sustainable_power will be estimated
[    1.570109] thermal thermal_zone6: power_allocator: sustainable_power will be estimated
[    1.570852] cpuidle: using governor menu
[    1.571215] Registered FIQ tty driver
[    1.571734] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    1.572467] ASID allocator initialised with 65536 entries
[    1.574930] printk: console [ramoops-1] enabled
[    1.575343] pstore: Registered ramoops as persistent store backend
[    1.575913] ramoops: using 0xf0000@0x110000, ecc: 0
[    1.625808] rockchip-gpio fd8a0000.gpio: probed /pinctrl/gpio@fd8a0000
[    1.626661] rockchip-gpio fec20000.gpio: probed /pinctrl/gpio@fec20000
[    1.627488] rockchip-gpio fec30000.gpio: probed /pinctrl/gpio@fec30000
[    1.628341] rockchip-gpio fec40000.gpio: probed /pinctrl/gpio@fec40000
[    1.629235] rockchip-gpio fec50000.gpio: probed /pinctrl/gpio@fec50000
[    1.629866] rockchip-pinctrl pinctrl: probed pinctrl
[    1.644567] fiq_debugger fiq_debugger.0: IRQ fiq not found
[    1.645071] fiq_debugger fiq_debugger.0: IRQ wakeup not found
[    1.645595] fiq_debugger_probe: could not install nmi irq handler
[ [    1.646195] printk: console [ttyFIQ0] enabled
   1.646195] printk: console [ttyFIQ0] enabled
[    1.646978] printk: bootconsole [uart8250] disabled
[    1.646978] printk: bootconsole [uart8250] disabled
[    1.647515] Registered fiq debugger ttyFIQ0
[    1.647894] vcc5v0_sys: supplied by vcc12v_dcin
[    1.648042] vcc5v0_usbdcin: supplied by vcc12v_dcin
[    1.648190] vcc5v0_usb: supplied by vcc5v0_usbdcin
[    1.648369] vcc_1v1_nldo_s3: supplied by vcc5v0_sys
[    1.648639] vbus5v0_typec: supplied by vcc5v0_usb
[    1.648789] vcc3v3_pcie30: supplied by vcc12v_dcin
[    1.648909] vcc5v0_host: supplied by vcc5v0_usb
[    1.649310] debugfs: Directory 'vcc_mipicsi1' with parent 'regulator' already present!
[    1.649321] debugfs: Directory 'vcc_mipicsi1' with parent 'vcc_mipicsi1' already present!
[    1.649612] iommu: Default domain type: Translated 
[    1.649701] rk_iommu fdab9000.iommu: version = 2
[    1.650115] rk_iommu fdb50800.iommu: version = 2
[    1.650408] rk_iommu fdb60f00.iommu: version = 2
[    1.650616] rk_iommu fdb70f00.iommu: version = 2
[    1.650799] rk_iommu fdb90480.iommu: version = 2
[    1.650997] rk_iommu fdba0800.iommu: version = 2
[    1.651193] rk_iommu fdba4800.iommu: version = 2
[    1.651394] rk_iommu fdba8800.iommu: version = 2
[    1.651594] rk_iommu fdbac800.iommu: version = 2
[    1.651791] rk_iommu fdbb0800.iommu: version = 2
[    1.652002] rk_iommu fdbdf000.iommu: version = 2
[    1.652293] rk_iommu fdbef000.iommu: version = 2
[    1.652596] rk_iommu fdc38700.iommu: version = 2
[    1.652896] rk_iommu fdc48700.iommu: version = 2
[    1.653052] rk_iommu fdd97e00.iommu: version = 2
[    1.653405] SCSI subsystem initialized
[    1.653496] usbcore: registered new interface driver usbfs
[    1.653516] usbcore: registered new interface driver hub
[    1.653534] usbcore: registered new device driver usb
[    1.653575] mc: Linux media interface: v0.10
[    1.653589] videodev: Linux video capture interface: v2.00
[    1.653619] pps_core: LinuxPPS API ver. 1 registered
[    1.653624] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.653632] PTP clock support registered
[    1.653938] arm-scmi firmware:scmi: SCMI Notifications - Core Enabled.
[    1.653975] arm-scmi firmware:scmi: SCMI Protocol v2.0 'rockchip:' Firmware version 0x0
[    1.655258] Advanced Linux Sound Architecture Driver Initialized.
[    1.655469] Bluetooth: Core ver 2.22
[    1.655485] NET: Registered protocol family 31
[    1.655490] Bluetooth: HCI device and connection manager initialized
[    1.655496] Bluetooth: HCI socket layer initialized
[    1.655502] Bluetooth: L2CAP socket layer initialized
[    1.655510] Bluetooth: SCO socket layer initialized
[    1.656820] rockchip-cpuinfo cpuinfo: SoC        : 35880000
[    1.656827] rockchip-cpuinfo cpuinfo: Serial        : d2849f234f75f93a
[    1.657182] clocksource: Switched to clocksource arch_sys_counter
[    2.019448] NET: Registered protocol family 2
[    2.019571] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    2.021801] tcp_listen_portaddr_hash hash table entries: 4096 (order: 5, 163840 bytes, linear)
[    2.021910] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    2.022305] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[    2.023167] TCP: Hash tables configured (established 65536 bind 65536)
[    2.023226] UDP hash table entries: 4096 (order: 6, 393216 bytes, linear)
[    2.023400] UDP-Lite hash table entries: 4096 (order: 6, 393216 bytes, linear)
[    2.023684] NET: Registered protocol family 1
[    2.023969] RPC: Registered named UNIX socket transport module.
[    2.023978] RPC: Registered udp transport module.
[    2.023982] RPC: Registered tcp transport module.
[    2.023986] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    2.024372] PCI: CLS 0 bytes, default 64
[    2.024659] Trying to unpack rootfs image as initramfs...
[    2.706669] Freeing initrd memory: 36596K
[    2.707465] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    2.709772] Initialise system trusted keyrings
[    2.709839] workingset: timestamp_bits=62 max_order=21 bucket_order=0
[    2.712300] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    2.712603] NFS: Registering the id_resolver key type
[    2.712617] Key type id_resolver registered
[    2.712621] Key type id_legacy registered
[    2.712642] ntfs: driver 2.1.32 [Flags: R/O].
[    2.712740] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    2.712850] fuse: init (API version 7.32)
[    2.713001] SGI XFS with security attributes, no debug enabled
[    2.737895] NET: Registered protocol family 38
[    2.737905] Key type asymmetric registered
[    2.737910] Asymmetric key parser 'x509' registered
[    2.737928] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
[    2.737933] io scheduler mq-deadline registered
[    2.737937] io scheduler kyber registered
[    2.747301] rockchip-hdptx-phy-hdmi fed60000.hdmiphy: hdptx phy init success
[    2.750071] rk-pcie fe180000.pcie: invalid prsnt-gpios property in node
[    2.750124] rk-pcie fe180000.pcie: no vpcie3v3 regulator found
[    2.750256] rk-pcie fe150000.pcie: invalid prsnt-gpios property in node
[    2.750426] rk-pcie fe170000.pcie: invalid prsnt-gpios property in node
[    2.750473] rk-pcie fe170000.pcie: no vpcie3v3 regulator found
[    2.750501] rk-pcie fe180000.pcie: missing legacy IRQ resource
[    2.750539] rk-pcie fe180000.pcie: IRQ msi not found
[    2.750550] rk-pcie fe180000.pcie: use outband MSI support
[    2.750559] rk-pcie fe180000.pcie: Missing *config* reg space
[    2.750577] rk-pcie fe180000.pcie: host bridge /pcie@fe180000 ranges:
[    2.750608] rk-pcie fe180000.pcie:      err 0x00f3000000..0x00f30fffff -> 0x00f3000000
[    2.750628] pwm-backlight backlight: supply power not found, using dummy regulator
[    2.750638] rk-pcie fe180000.pcie:       IO 0x00f3100000..0x00f31fffff -> 0x00f3100000
[    2.750660] rk-pcie fe180000.pcie:      MEM 0x00f3200000..0x00f3ffffff -> 0x00f3200000
[    2.750677] rk-pcie fe180000.pcie:      MEM 0x09c0000000..0x09ffffffff -> 0x09c0000000
[    2.750714] rk-pcie fe180000.pcie: Missing *config* reg space
[    2.750748] rk-pcie fe180000.pcie: invalid resource
[    2.750755] rk-pcie fe170000.pcie: missing legacy IRQ resource
[    2.750768] rk-pcie fe170000.pcie: IRQ msi not found
[    2.750780] rk-pcie fe170000.pcie: use outband MSI support
[    2.750789] rk-pcie fe170000.pcie: Missing *config* reg space
[    2.750806] rk-pcie fe170000.pcie: host bridge /pcie@fe170000 ranges:
[    2.750823] mpp_service mpp-srv: unknown mpp version for missing VCS info
[    2.750829] mpp_service mpp-srv: probe start
[    2.750834] rk-pcie fe170000.pcie:      err 0x00f2000000..0x00f20fffff -> 0x00f2000000
[    2.750849] rk-pcie fe170000.pcie:       IO 0x00f2100000..0x00f21fffff -> 0x00f2100000
[    2.750870] rk-pcie fe170000.pcie:      MEM 0x00f2200000..0x00f2ffffff -> 0x00f2200000
[    2.750887] rk-pcie fe170000.pcie:      MEM 0x0980000000..0x09bfffffff -> 0x0980000000
[    2.750919] rk-pcie fe170000.pcie: Missing *config* reg space
[    2.750951] rk-pcie fe170000.pcie: invalid resource
[    2.752268] mpp_vdpu2 fdb50400.vdpu: Adding to iommu group 1
[    2.752498] mpp_vdpu2 fdb50400.vdpu: probe device
[    2.752617] mpp_vdpu2 fdb50400.vdpu: reset group is empty!
[    2.752622] vdpu_init:501: No aclk reset resource define
[    2.752628] mpp_vdpu2 fdb50400.vdpu: reset group is empty!
[    2.752632] vdpu_init:504: No hclk reset resource define
[    2.752726] mpp_vdpu2 fdb50400.vdpu: probing finish
[    2.752961] mpp_vepu2 jpege-ccu: probing start
[    2.752967] mpp_vepu2 jpege-ccu: probing finish
[    2.753098] mpp_vepu2 fdba0000.jpege-core: Adding to iommu group 5
[    2.753245] mpp_vepu2 fdba0000.jpege-core: probing start
[    2.753378] mpp_vepu2 fdba0000.jpege-core: attach ccu success
[    2.753478] mpp_vepu2 fdba0000.jpege-core: probing finish
[    2.753583] mpp_vepu2 fdba4000.jpege-core: Adding to iommu group 6
[    2.753724] mpp_vepu2 fdba4000.jpege-core: probing start
[    2.753840] mpp_vepu2 fdba4000.jpege-core: attach ccu success
[    2.753971] mpp_vepu2 fdba4000.jpege-core: probing finish
[    2.754086] mpp_vepu2 fdba8000.jpege-core: Adding to iommu group 7
[    2.754227] mpp_vepu2 fdba8000.jpege-core: probing start
[    2.754346] mpp_vepu2 fdba8000.jpege-core: attach ccu success
[    2.754438] mpp_vepu2 fdba8000.jpege-core: probing finish
[    2.754554] mpp_vepu2 fdbac000.jpege-core: Adding to iommu group 8
[    2.754695] mpp_vepu2 fdbac000.jpege-core: probing start
[    2.754810] mpp_vepu2 fdbac000.jpege-core: attach ccu success
[    2.754899] mpp_vepu2 fdbac000.jpege-core: probing finish
[    2.755220] mpp-iep2 fdbb0000.iep: Adding to iommu group 9
[    2.755359] mpp-iep2 fdbb0000.iep: probe device
[    2.755493] mpp-iep2 fdbb0000.iep: allocate roi buffer failed
[    2.755574] mpp-iep2 fdbb0000.iep: probing finish
[    2.755860] mpp_jpgdec fdb90000.jpegd: Adding to iommu group 4
[    2.766672] rk-pcie fe150000.pcie: missing legacy IRQ resource
[    2.766694] rk-pcie fe150000.pcie: IRQ msi not found
[    2.766704] rk-pcie fe150000.pcie: use outband MSI support
[    2.766713] rk-pcie fe150000.pcie: Missing *config* reg space
[    2.766730] rk-pcie fe150000.pcie: host bridge /pcie@fe150000 ranges:
[    2.766758] rk-pcie fe150000.pcie:      err 0x00f0000000..0x00f00fffff -> 0x00f0000000
[    2.766783] rk-pcie fe150000.pcie:       IO 0x00f0100000..0x00f01fffff -> 0x00f0100000
[    2.766804] rk-pcie fe150000.pcie:      MEM 0x00f0200000..0x00f0ffffff -> 0x00f0200000
[    2.766816] mpp_jpgdec fdb90000.jpegd: probe device
[    2.766822] rk-pcie fe150000.pcie:      MEM 0x0900000000..0x093fffffff -> 0x0900000000
[    2.766855] rk-pcie fe150000.pcie: Missing *config* reg space
[    2.766888] rk-pcie fe150000.pcie: invalid resource
[    2.767039] mpp_jpgdec fdb90000.jpegd: probing finish
[    2.767445] mpp_rkvdec2 fdc30000.rkvdec-ccu: rkvdec-ccu, probing start
[    2.767511] mpp_rkvdec2 fdc30000.rkvdec-ccu: probing finish
[    2.767611] mpp_rkvdec2 fdc38100.rkvdec-core: Adding to iommu group 12
[    2.767882] mpp_rkvdec2 fdc38100.rkvdec-core: rkvdec-core, probing start
[    2.768015] mpp_rkvdec2 fdc38100.rkvdec-core: shared_niu_a is not found!
[    2.768021] rkvdec2_init:697: No niu aclk reset resource define
[    2.768026] mpp_rkvdec2 fdc38100.rkvdec-core: shared_niu_h is not found!
[    2.768031] rkvdec2_init:700: No niu hclk reset resource define
[    2.768102] mpp_rkvdec2 fdc38100.rkvdec-core: core_mask=00010001
[    2.768107] mpp_rkvdec2 fdc38100.rkvdec-core: attach ccu as core 0
[    2.768262] mpp_rkvdec2 fdc38100.rkvdec-core: sram_start 0x00000000ff001000
[    2.768268] mpp_rkvdec2 fdc38100.rkvdec-core: rcb_iova 0x00000000fff00000
[    2.768273] mpp_rkvdec2 fdc38100.rkvdec-core: sram_size 491520
[    2.768278] mpp_rkvdec2 fdc38100.rkvdec-core: rcb_size 1048576
[    2.768283] mpp_rkvdec2 fdc38100.rkvdec-core: min_width 512
[    2.768317] mpp_rkvdec2 fdc38100.rkvdec-core: probing finish
[    2.768399] mpp_rkvdec2 fdc48100.rkvdec-core: Adding to iommu group 13
[    2.768636] mpp_rkvdec2 fdc48100.rkvdec-core: rkvdec-core, probing start
[    2.768764] mpp_rkvdec2 fdc48100.rkvdec-core: shared_niu_a is not found!
[    2.768770] rkvdec2_init:697: No niu aclk reset resource define
[    2.768775] mpp_rkvdec2 fdc48100.rkvdec-core: shared_niu_h is not found!
[    2.768780] rkvdec2_init:700: No niu hclk reset resource define
[    2.768835] mpp_rkvdec2 fdc48100.rkvdec-core: core_mask=00020002
[    2.768853] mpp_rkvdec2 fdc48100.rkvdec-core: attach ccu as core 1
[    2.769040] mpp_rkvdec2 fdc48100.rkvdec-core: sram_start 0x00000000ff079000
[    2.769045] mpp_rkvdec2 fdc48100.rkvdec-core: rcb_iova 0x00000000ffe00000
[    2.769050] mpp_rkvdec2 fdc48100.rkvdec-core: sram_size 487424
[    2.769055] mpp_rkvdec2 fdc48100.rkvdec-core: rcb_size 1048576
[    2.769060] mpp_rkvdec2 fdc48100.rkvdec-core: min_width 512
[    2.769094] mpp_rkvdec2 fdc48100.rkvdec-core: probing finish
[    2.769302] mpp_rkvenc2 rkvenc-ccu: probing start
[    2.769308] mpp_rkvenc2 rkvenc-ccu: probing finish
[    2.769446] mpp_rkvenc2 fdbd0000.rkvenc-core: Adding to iommu group 10
[    2.769633] mpp_rkvenc2 fdbd0000.rkvenc-core: probing start
[    2.769653] mpp_rkvenc2 fdbd0000.rkvenc-core: link mode task capacity 8
[    2.769816] mpp_rkvenc2 fdbd0000.rkvenc-core: attach ccu as core 0
[    2.769909] mpp_rkvenc2 fdbd0000.rkvenc-core: probing finish
[    2.769990] mpp_rkvenc2 fdbe0000.rkvenc-core: Adding to iommu group 11
[    2.770228] mpp_rkvenc2 fdbe0000.rkvenc-core: probing start
[    2.770247] mpp_rkvenc2 fdbe0000.rkvenc-core: link mode task capacity 8
[    2.770431] mpp_rkvenc2 fdbe0000.rkvenc-core: attach ccu as core 1
[    2.770556] mpp_rkvenc2 fdbe0000.rkvenc-core: probing finish
[    2.771135] mpp_av1dec: Adding child /av1d@fdc70000
[    2.771402] mpp_av1dec: register device av1d-master
[    2.771426] mpp_av1dec av1d-master: av1_iommu_of_xlate,784
[    2.771449] av1_iommu_probe_device,736, consumer : av1d-master, supplier : fdca0000.iommu
[    2.771459] mpp_av1dec av1d-master: Adding to iommu group 15
[    2.771708] mpp_av1dec av1d-master: probing start
[    2.771971] mpp_av1dec av1d-master: probing finish
[    2.772013] mpp_service mpp-srv: probe success
[    2.781134] dma-pl330 fea10000.dma-controller: Loaded driver for PL330 DMAC-241330
[    2.781145] dma-pl330 fea10000.dma-controller:     DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[    2.782222] dma-pl330 fea30000.dma-controller: Loaded driver for PL330 DMAC-241330
[    2.782231] dma-pl330 fea30000.dma-controller:     DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[    2.783262] dma-pl330 fed10000.dma-controller: Loaded driver for PL330 DMAC-241330
[    2.783271] dma-pl330 fed10000.dma-controller:     DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[    2.783780] rockchip-pvtm fda40000.pvtm: pvtm@0 probed
[    2.783872] rockchip-pvtm fda50000.pvtm: pvtm@1 probed
[    2.783939] rockchip-pvtm fda60000.pvtm: pvtm@2 probed
[    2.784001] rockchip-pvtm fdaf0000.pvtm: pvtm@3 probed
[    2.784060] rockchip-pvtm fdb30000.pvtm: pvtm@4 probed
[    2.784743] rockchip-system-monitor rockchip-system-monitor: system monitor probe
[    2.785613] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled
[    2.786111] febb0000.serial: ttyS8 at MMIO 0xfebb0000 (irq = 81, base_baud = 1500000) is a 16550A
[    2.787481] random: fast init done
[    2.787576] random: crng init done
[    2.788314] rockchip-vop2 fdd90000.vop: Adding to iommu group 14
[    2.796254] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp0 assign plane mask: 0x5, primary plane phy id: 2
[    2.796268] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp1 assign plane mask: 0xa, primary plane phy id: 3
[    2.796290] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp2 assign plane mask: 0x140, primary plane phy id: 8
[    2.796300] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp3 assign plane mask: 0x280, primary plane phy id: 9
[    2.796308] rockchip-drm display-subsystem: failed to get hdmi0_phy_pll: -2
[    2.796315] rockchip-drm display-subsystem: failed to get hdmi1_phy_pll: -2
[    2.796569] [drm] failed to init overlay plane Cluster0-win1
[    2.796608] [drm] failed to init overlay plane Cluster1-win1
[    2.796644] [drm] failed to init overlay plane Cluster2-win1
[    2.796681] [drm] failed to init overlay plane Cluster3-win1
[    2.809300] rockchip-drm display-subsystem: bound fdd90000.vop (ops 0xffffffc010fb1eb0)
[    2.809996] dwhdmi-rockchip fde80000.hdmi: registered ddc I2C bus driver
[    2.810212] rockchip-drm display-subsystem: bound fde80000.hdmi (ops 0xffffffc010fb9c10)
[    2.810286] rockchip-drm display-subsystem: bound fde50000.dp (ops 0xffffffc010fbbf20)
[    2.810716] rockchip-drm display-subsystem: failed to parse loader memory
[    2.922862] rockchip-drm display-subsystem: [drm] fb0: rockchipdrmfb frame buffer device
[    2.923423] [drm] Initialized rockchip 3.0.0 20140818 for display-subsystem on minor 0
[    2.931064] brd: module loaded
[    2.934739] loop: module loaded
[    2.934947] zram: Added device: zram0
[    2.935129] lkdtm: No crash points registered, enable through debugfs
[    2.935232] system_heap: orders[0] = 6
[    2.935237] system_heap: orders[1] = 4
[    2.935242] system_heap: orders[2] = 0
[    2.936467] ahci fe210000.sata: supply ahci not found, using dummy regulator
[    2.936546] ahci fe210000.sata: supply phy not found, using dummy regulator
[    2.936626] ahci fe210000.sata: supply target not found, using dummy regulator
[    2.936702] ahci fe210000.sata: forcing port_map 0x0 -> 0x1
[    2.936727] ahci fe210000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode
[    2.936736] ahci fe210000.sata: flags: ncq sntf pm led clo only pmp fbs pio slum part ccc apst 
[    2.936747] ahci fe210000.sata: port 0 can do FBS, forcing FBSCP
[    2.937565] scsi host0: ahci
[    2.937744] ata1: SATA max UDMA/133 mmio [mem 0xfe210000-0xfe210fff] port 0x100 irq 70
[    2.938997] rockchip-spi feb20000.spi: no high_speed pinctrl state
[    2.940342] rk806 spi2.0: chip id: RK806,ver:0x2, 0x0
[    2.940620] rk806 spi2.0: ON: 0x40 OFF:0x0
[    2.942968] vdd_gpu_s0: supplied by vcc5v0_sys
[    2.944535] vdd_cpu_lit_s0: supplied by vcc5v0_sys
[    2.945683] vdd_log_s0: supplied by vcc5v0_sys
[    2.946797] vdd_vdenc_s0: supplied by vcc5v0_sys
[    2.948031] vdd_ddr_s0: supplied by vcc5v0_sys
[    2.948837] vdd2_ddr_s3: supplied by vcc5v0_sys
[    2.949950] vdd_2v0_pldo_s3: supplied by vcc5v0_sys
[    2.951020] vcc_3v3_s3: supplied by vcc5v0_sys
[    2.951995] vddq_ddr_s0: supplied by vcc5v0_sys
[    2.953106] vcc_1v8_s3: supplied by vcc5v0_sys
[    2.954258] vdd_0v75_s3: supplied by vcc_1v1_nldo_s3
[    2.955360] vdd_ddr_pll_s0: supplied by vcc_1v1_nldo_s3
[    2.956364] avdd_0v75_s0: supplied by vcc_1v1_nldo_s3
[    2.957400] vdd_0v85_s0: supplied by vcc_1v1_nldo_s3
[    2.958338] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[    2.958428] vdd_0v75_s0: supplied by vcc_1v1_nldo_s3
[    2.959531] avcc_1v8_s0: supplied by vdd_2v0_pldo_s3
[    2.960768] vcc_1v8_s0: supplied by vdd_2v0_pldo_s3
[    2.961893] avdd_1v2_s0: supplied by vdd_2v0_pldo_s3
[    2.962997] vcc_3v3_s0: supplied by vcc5v0_sys
[    2.964031] vccio_sd_s0: supplied by vcc5v0_sys
[    2.965081] pldo6_s3: supplied by vcc5v0_sys
[    2.966115] rk806 spi2.0: no sleep-setting state
[    2.966137] rk806 spi2.0: no reset-setting pinctrl state
[    2.966149] rk806 spi2.0: no dvs-setting pinctrl state
[    2.969956] libphy: Fixed MDIO Bus: probed
[    2.971676] rk-pcie fe150000.pcie: PCIe Linking... LTSSM is 0x0
[    2.971788] rk_gmac-dwmac fe1b0000.ethernet: IRQ eth_lpi not found
[    2.972235] rk_gmac-dwmac fe1b0000.ethernet: no regulator found
[    2.972251] rk_gmac-dwmac fe1b0000.ethernet: clock input or output? (output).
[    2.972265] rk_gmac-dwmac fe1b0000.ethernet: TX delay(0x43).
[    2.972278] rk_gmac-dwmac fe1b0000.ethernet: Can not read property: rx_delay.
[    2.972290] rk_gmac-dwmac fe1b0000.ethernet: set rx_delay to 0xffffffff
[    2.972309] rk_gmac-dwmac fe1b0000.ethernet: integrated PHY? (no).
[    2.972326] rk_gmac-dwmac fe1b0000.ethernet: cannot get clock mac_clk_rx
[    2.972341] rk_gmac-dwmac fe1b0000.ethernet: cannot get clock mac_clk_tx
[    2.972377] rk_gmac-dwmac fe1b0000.ethernet: cannot get clock clk_mac_speed
[    2.972620] rk_gmac-dwmac fe1b0000.ethernet: init for RGMII_RXID
[    2.972771] rk_gmac-dwmac fe1b0000.ethernet: User ID: 0x30, Synopsys ID: 0x51
[    2.972788] rk_gmac-dwmac fe1b0000.ethernet:     DWMAC4/5
[    2.972802] rk_gmac-dwmac fe1b0000.ethernet: DMA HW capability register supported
[    2.972814] rk_gmac-dwmac fe1b0000.ethernet: RX Checksum Offload Engine supported
[    2.972824] rk_gmac-dwmac fe1b0000.ethernet: TX Checksum insertion supported
[    2.972835] rk_gmac-dwmac fe1b0000.ethernet: Wake-Up On Lan supported
[    2.972901] rk_gmac-dwmac fe1b0000.ethernet: TSO supported
[    2.972913] rk_gmac-dwmac fe1b0000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    2.972927] rk_gmac-dwmac fe1b0000.ethernet: Enabled Flow TC (entries=2)
[    2.972938] rk_gmac-dwmac fe1b0000.ethernet: TSO feature enabled
[    2.972951] rk_gmac-dwmac fe1b0000.ethernet: Using 32 bits DMA width
[    2.983865] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[    2.997215] rk-pcie fe150000.pcie: PCIe Linking... LTSSM is 0x0
[    3.010522] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[    3.013884] rk-pcie fe180000.pcie: PCIe Link up, LTSSM is 0x30011
[    3.014057] rk-pcie fe180000.pcie: PCI host bridge to bus 0003:30
[    3.014075] pci_bus 0003:30: root bus resource [bus 30-3f]
[    3.014090] pci_bus 0003:30: root bus resource [??? 0xf3000000-0xf30fffff flags 0x0]
[    3.014105] pci_bus 0003:30: root bus resource [io  0x0000-0xfffff] (bus address [0xf3100000-0xf31fffff])
[    3.014118] pci_bus 0003:30: root bus resource [mem 0xf3200000-0xf3ffffff]
[    3.014131] pci_bus 0003:30: root bus resource [mem 0x9c0000000-0x9ffffffff pref]
[    3.014192] pci 0003:30:00.0: [1d87:3588] type 01 class 0x060400
[    3.014227] pci 0003:30:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref]
[    3.014309] pci 0003:30:00.0: supports D1 D2
[    3.014322] pci 0003:30:00.0: PME# supported from D0 D1 D3hot
[    3.023880] rk-pcie fe150000.pcie: PCIe Linking... LTSSM is 0x0
[    3.024328] pci 0003:30:00.0: Primary bus is hard wired to 0
[    3.024345] pci 0003:30:00.0: bridge configuration invalid ([bus 01-ff]), reconfiguring
[    3.024601] pci 0003:31:00.0: [10ec:8168] type 00 class 0x020000
[    3.024682] pci 0003:31:00.0: reg 0x10: initial BAR value 0x00000000 invalid
[    3.024696] pci 0003:31:00.0: reg 0x10: [io  size 0x0100]
[    3.024789] pci 0003:31:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit]
[    3.024865] pci 0003:31:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit]
[    3.025329] pci 0003:31:00.0: supports D1 D2
[    3.025342] pci 0003:31:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    3.037981] dwhdmi-rockchip fde80000.hdmi: use tmds mode
[    3.038036] rockchip-vop2 fdd90000.vop: [drm:vop2_crtc_atomic_enable] Update mode to 1920x1080p60, type: 11(if:800) for vp0 dclk: 148500000
[    3.038205] rockchip-vop2 fdd90000.vop: [drm:vop2_crtc_atomic_enable] dclk_out0 div: 0 dclk_core0 div: 2
[    3.038220] rockchip-vop2 fdd90000.vop: [drm:vop2_crtc_atomic_enable] set dclk_vop0 to 148500000, get 148500000
[    3.038245] dwhdmi-rockchip fde80000.hdmi: final tmdsclk = 148500000
[    3.038255] rockchip-hdptx-phy-hdmi fed60000.hdmiphy: bus_width:0x16a8c8,bit_rate:1485000
[    3.038264] rockchip-hdptx-phy-hdmi fed60000.hdmiphy: hdptx_ropll_cmn_config bus_width:16a8c8 rate:1485000
[    3.038589] rockchip-hdptx-phy-hdmi fed60000.hdmiphy: hdptx phy pll locked!
[    3.038787] rockchip-hdptx-phy-hdmi fed60000.hdmiphy: hdptx phy lane locked!
[    3.038813] dwhdmi-rockchip fde80000.hdmi: don't use dsc mode
[    3.040526] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[    3.043398] pci_bus 0003:31: busn_res: [bus 31-3f] end is updated to 31
[    3.043439] pci 0003:30:00.0: BAR 8: assigned [mem 0xf3200000-0xf32fffff]
[    3.043456] pci 0003:30:00.0: BAR 6: assigned [mem 0xf3300000-0xf330ffff pref]
[    3.043471] pci 0003:30:00.0: BAR 7: assigned [io  0x1000-0x1fff]
[    3.043490] pci 0003:31:00.0: BAR 4: assigned [mem 0xf3200000-0xf3203fff 64bit]
[    3.043547] pci 0003:31:00.0: BAR 2: assigned [mem 0xf3204000-0xf3204fff 64bit]
[    3.043602] pci 0003:31:00.0: BAR 0: assigned [io  0x1000-0x10ff]
[    3.043627] pci 0003:30:00.0: PCI bridge to [bus 31]
[    3.043641] pci 0003:30:00.0:   bridge window [io  0x1000-0x1fff]
[    3.043655] pci 0003:30:00.0:   bridge window [mem 0xf3200000-0xf32fffff]
[    3.046710] pcieport 0003:30:00.0: PME: Signaling with IRQ 127
[    3.046974] r8168 Gigabit Ethernet driver 8.049.02-NAPI loaded
[    3.047024] r8168 0003:31:00.0: enabling device (0000 -> 0003)
[    3.053867] rk-pcie fe150000.pcie: PCIe Linking... LTSSM is 0x0
[    3.063346] r8168 0003:31:00.0 (unnamed net_device) (uninitialized): Invalid ether addr 00:00:00:00:00:00
[    3.063375] r8168 0003:31:00.0 (unnamed net_device) (uninitialized): Random ether addr ca:b9:9b:7f:d4:83
[    3.063860] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[    3.063922] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.
[    3.066029] r8168  Copyright (C) 2021 Realtek NIC software team <nicfae@realtek.com> 
[    3.066029]  This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>. 
[    3.066029]  This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>. 
[    3.080534] rk-pcie fe150000.pcie: PCIe Linking... LTSSM is 0x0
[    3.103882] libphy: stmmac: probed
[    3.109652] usbcore: registered new interface driver rtl8150
[    3.109726] usbcore: registered new interface driver r8152
[    3.126605] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.126624] ehci-pci: EHCI PCI platform driver
[    3.126656] ehci-platform: EHCI generic platform driver
[    3.129125] ehci-platform fc800000.usb: EHCI Host Controller
[    3.129221] ehci-platform fc800000.usb: new USB bus registered, assigned bus number 1
[    3.129302] ehci-platform fc800000.usb: irq 19, io mem 0xfc800000
[    3.140532] ehci-platform fc800000.usb: USB 2.0 started, EHCI 1.00
[    3.140641] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[    3.140649] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.140656] usb usb1: Product: EHCI Host Controller
[    3.140661] usb usb1: Manufacturer: Linux 5.10.66 ehci_hcd
[    3.140667] usb usb1: SerialNumber: fc800000.usb
[    3.140910] hub 1-0:1.0: USB hub found
[    3.140931] hub 1-0:1.0: 1 port detected
[    3.143509] ehci-platform fc880000.usb: EHCI Host Controller
[    3.143597] ehci-platform fc880000.usb: new USB bus registered, assigned bus number 2
[    3.143657] ehci-platform fc880000.usb: irq 21, io mem 0xfc880000
[    3.153865] ehci-platform fc880000.usb: USB 2.0 started, EHCI 1.00
[    3.153974] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[    3.153982] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.153988] usb usb2: Product: EHCI Host Controller
[    3.153994] usb usb2: Manufacturer: Linux 5.10.66 ehci_hcd
[    3.153999] usb usb2: SerialNumber: fc880000.usb
[    3.154216] hub 2-0:1.0: USB hub found
[    3.154234] hub 2-0:1.0: 1 port detected
[    3.154635] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    3.154649] ohci-platform: OHCI generic platform driver
[    3.154819] ohci-platform fc840000.usb: Generic Platform OHCI controller
[    3.154904] ohci-platform fc840000.usb: new USB bus registered, assigned bus number 3
[    3.154956] ohci-platform fc840000.usb: irq 20, io mem 0xfc840000
[    3.214615] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
[    3.214626] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.214632] usb usb3: Product: Generic Platform OHCI controller
[    3.214638] usb usb3: Manufacturer: Linux 5.10.66 ohci_hcd
[    3.214644] usb usb3: SerialNumber: fc840000.usb
[    3.214864] hub 3-0:1.0: USB hub found
[    3.214884] hub 3-0:1.0: 1 port detected
[    3.215188] ohci-platform fc8c0000.usb: Generic Platform OHCI controller
[    3.215273] ohci-platform fc8c0000.usb: new USB bus registered, assigned bus number 4
[    3.215326] ohci-platform fc8c0000.usb: irq 22, io mem 0xfc8c0000
[    3.243856] dwhdmi-rockchip fde80000.hdmi: dw hdmi qp use tmds mode
[    3.250323] ata1: SATA link down (SStatus 0 SControl 300)
[    3.274615] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
[    3.274627] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.274633] usb usb4: Product: Generic Platform OHCI controller
[    3.274639] usb usb4: Manufacturer: Linux 5.10.66 ohci_hcd
[    3.274644] usb usb4: SerialNumber: fc8c0000.usb
[    3.274867] hub 4-0:1.0: USB hub found
[    3.274886] hub 4-0:1.0: 1 port detected
[    3.275537] phy phy-fd5d4000.syscon:usb2-phy@4000.3: illegal mode
[    3.275549] xhci-hcd xhci-hcd.7.auto: xHCI Host Controller
[    3.275635] xhci-hcd xhci-hcd.7.auto: new USB bus registered, assigned bus number 5
[    3.275734] xhci-hcd xhci-hcd.7.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
[    3.275763] xhci-hcd xhci-hcd.7.auto: irq 130, io mem 0xfc400000
[    3.275918] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[    3.275926] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.275932] usb usb5: Product: xHCI Host Controller
[    3.275938] usb usb5: Manufacturer: Linux 5.10.66 xhci-hcd
[    3.275943] usb usb5: SerialNumber: xhci-hcd.7.auto
[    3.276169] hub 5-0:1.0: USB hub found
[    3.276188] hub 5-0:1.0: 1 port detected
[    3.276347] xhci-hcd xhci-hcd.7.auto: xHCI Host Controller
[    3.276431] xhci-hcd xhci-hcd.7.auto: new USB bus registered, assigned bus number 6
[    3.276442] xhci-hcd xhci-hcd.7.auto: Host supports USB 3.0 SuperSpeed
[    3.276476] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[    3.276534] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
[    3.276541] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.276547] usb usb6: Product: xHCI Host Controller
[    3.276552] usb usb6: Manufacturer: Linux 5.10.66 xhci-hcd
[    3.276558] usb usb6: SerialNumber: xhci-hcd.7.auto
[    3.276770] hub 6-0:1.0: USB hub found
[    3.276788] hub 6-0:1.0: 1 port detected
[    3.277009] usbcore: registered new interface driver cdc_acm
[    3.277015] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    3.277119] usbcore: registered new interface driver uas
[    3.277195] usbcore: registered new interface driver usb-storage
[    3.277240] usbcore: registered new interface driver usbserial_generic
[    3.277256] usbserial: USB Serial support registered for generic
[    3.277277] usbcore: registered new interface driver cp210x
[    3.277290] usbserial: USB Serial support registered for cp210x
[    3.277331] usbcore: registered new interface driver ftdi_sio
[    3.277344] usbserial: USB Serial support registered for FTDI USB Serial Device
[    3.277447] usbcore: registered new interface driver keyspan
[    3.277462] usbserial: USB Serial support registered for Keyspan - (without firmware)
[    3.277475] usbserial: USB Serial support registered for Keyspan 1 port adapter
[    3.277487] usbserial: USB Serial support registered for Keyspan 2 port adapter
[    3.277499] usbserial: USB Serial support registered for Keyspan 4 port adapter
[    3.277525] usbcore: registered new interface driver option
[    3.277537] usbserial: USB Serial support registered for GSM modem (1-port)
[    3.277683] usbcore: registered new interface driver oti6858
[    3.277696] usbserial: USB Serial support registered for oti6858
[    3.277718] usbcore: registered new interface driver pl2303
[    3.277730] usbserial: USB Serial support registered for pl2303
[    3.277760] usbcore: registered new interface driver qcserial
[    3.277773] usbserial: USB Serial support registered for Qualcomm USB modem
[    3.277808] usbcore: registered new interface driver sierra
[    3.277821] usbserial: USB Serial support registered for Sierra USB modem
[    3.278334] usbcore: registered new interface driver usbtouchscreen
[    3.279571] input: rk805 pwrkey as /devices/platform/feb20000.spi/spi_master/spi2/spi2.0/rk805-pwrkey.5.auto/input/input0
[    3.279849] i2c /dev entries driver
[    3.282965] vdd_cpu_big0_s0: supplied by vcc5v0_sys
[    3.290993] vdd_cpu_big1_s0: supplied by vcc5v0_sys
[    3.304278] rtc-hym8563 2-0051: rtc information is invalid
[    3.306446] rtc-hym8563 2-0051: registered as rtc0
[    3.306767] rtc-hym8563 2-0051: setting system clock to 2021-01-01T12:00:00 UTC (1609502400)
[    3.310222] vdd_npu_s0: supplied by vcc5v0_sys
[    3.316654] usbcore: registered new interface driver uvcvideo
[    3.316665] USB Video Class driver (1.1.1)
[    3.318031] rockchip-thermal fec00000.tsadc: Missing rockchip,grf property
[    3.318632] rockchip-thermal fec00000.tsadc: tsadc is probed successfully!
[    3.319039] Bluetooth: HCI UART driver ver 2.3
[    3.319047] Bluetooth: HCI UART protocol H4 registered
[    3.319052] Bluetooth: HCI UART protocol ATH3K registered
[    3.319090] usbcore: registered new interface driver bfusb
[    3.319121] usbcore: registered new interface driver btusb
[    3.319525] cpu cpu0: leakage=14
[    3.321056] cpu cpu0: pvtm=1504
[    3.321172] cpu cpu0: pvtm-volt-sel=4
[    3.321724] cpu cpu4: leakage=10
[    3.328271] cpu cpu4: pvtm=1724
[    3.332248] cpu cpu4: pvtm-volt-sel=5
[    3.333544] cpu cpu6: leakage=11
[    3.340123] cpu cpu6: pvtm=1734
[    3.344136] cpu cpu6: pvtm-volt-sel=5
[    3.345884] cpu cpu0: avs=0
[    3.346712] cpu cpu4: avs=0
[    3.347539] cpu cpu6: avs=0
[    3.347825] cpu cpu0: EM: created perf domain
[    3.347891] cpu cpu0: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=1608000000 h_table=0
[    3.348571] cpu cpu4: EM: created perf domain
[    3.348625] cpu cpu4: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=2208000000 h_table=0
[    3.350923] cpu cpu6: EM: created perf domain
[    3.351323] cpu cpu6: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=2208000000 h_table=0
[    3.358553] sdhci: Secure Digital Host Controller Interface driver
[    3.358565] sdhci: Copyright(c) Pierre Ossman
[    3.358570] Synopsys Designware Multimedia Card Interface Driver
[    3.359092] sdhci-pltfm: SDHCI platform and OF driver helper
[    3.360406] arm-scmi firmware:scmi: Failed. SCMI protocol 17 not active.
[    3.360452] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
[    3.360742] dwhdmi-rockchip fde80000.hdmi: use tmds mode
[    3.361136] cryptodev: driver 1.12 loaded.
[    3.361174] hid: raw HID events driver (C) Jiri Kosina
[    3.361418] usbcore: registered new interface driver usbhid
[    3.361425] usbhid: USB HID core driver
[    3.369629] optee: probing for conduit method.
[    3.369661] optee: revision 3.13 (87d94c5e)
[    3.370045] optee: initialized driver
[    3.370602] usbcore: registered new interface driver snd-usb-audio
[    3.378668] input: rockchip-hdmi0 rockchip-hdmi0 as /devices/platform/hdmi0-sound/sound/card0/input1
[    3.379586] input: headset-keys as /devices/platform/es8388-sound/input/input2
[    3.389244] ES8323 7-0011: ASoC: error at soc_component_write_no_lock on ES8323.7-0011: -5
[    3.391638] mmc0: SDHCI controller on fe2e0000.mmc [fe2e0000.mmc] using ADMA
[    3.426416] mmc0: new HS400 Enhanced strobe MMC card at address 0001
[    3.427290] mmcblk0: mmc0:0001 TX2932 29.1 GiB 
[    3.427542] mmcblk0boot0: mmc0:0001 TX2932 partition 1 4.00 MiB
[    3.427763] mmcblk0boot1: mmc0:0001 TX2932 partition 2 4.00 MiB
[    3.428190] mmcblk0rpmb: mmc0:0001 TX2932 partition 3 4.00 MiB, chardev (236:0)
[    3.432122]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8
[    3.439361] input: rockchip,es8388 Headset as /devices/platform/es8388-sound/sound/card1/input3
[    3.440433] Initializing XFRM netlink socket
[    3.440811] NET: Registered protocol family 10
[    3.441756] Segment Routing with IPv6
[    3.441829] NET: Registered protocol family 17
[    3.441850] NET: Registered protocol family 15
[    3.442215] Bluetooth: RFCOMM socket layer initialized
[    3.442241] Bluetooth: RFCOMM ver 1.11
[    3.442257] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    3.442269] Bluetooth: HIDP socket layer initialized
[    3.442321] [BT_RFKILL]: Enter rfkill_rk_init
[    3.442330] [WLAN_RFKILL]: Enter rfkill_wlan_init
[    3.442855] [WLAN_RFKILL]: Enter rfkill_wlan_probe
[    3.442889] [WLAN_RFKILL]: can't find rockchip,grf property
[    3.442899] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = ap6255
[    3.442907] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
[    3.442915] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
[    3.442984] [WLAN_RFKILL]: wlan_platdata_parse_dt: WIFI,poweren_gpio = 105 flags = 0.
[    3.443017] [WLAN_RFKILL]: wlan_platdata_parse_dt: WIFI,host_wake_irq = 103, flags = 0.
[    3.443030] [WLAN_RFKILL]: wlan_platdata_parse_dt: The ref_wifi_clk not found !
[    3.443038] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
[    3.443047] [WLAN_RFKILL]: rfkill_set_wifi_bt_power: 1
[    3.443056] [WLAN_RFKILL]: Exit rfkill_wlan_probe
[    3.443761] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 100.
[    3.443792] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 102.
[    3.443811] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 97.
[    3.443830] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 96.
[    3.444432] [BT_RFKILL]: Request irq for bt wakeup host
[    3.444516] [BT_RFKILL]: ** disable irq
[    3.444613] [BT_RFKILL]: bt_default device registered.
[    3.444709] Key type dns_resolver registered
[    3.446281] Loading compiled-in X.509 certificates
[    3.447169] pstore: Using crash dump compression: deflate
[    3.447544] rga3_core0 fdb60000.rga: Adding to iommu group 2
[    3.447813] rga: rga3_core0_irq, irq = 32, match scheduler
[    3.448265] rga: rga3_core0 driver loaded successfully ver:3.0.76831
[    3.448299] rga: rga3_core0 probe successfully
[    3.448807] rga3_core1 fdb70000.rga: Adding to iommu group 3
[    3.449043] rga: rga3_core1_irq, irq = 33, match scheduler
[    3.449477] rga: rga3_core1 driver loaded successfully ver:3.0.76831
[    3.449506] rga: rga3_core1 probe successfully
[    3.450027] rga: rga2_irq, irq = 34, match scheduler
[    3.450438] rga: rga2 driver loaded successfully ver:3.2.63318
[    3.450466] rga: rga2 probe successfully
[    3.451330] rga: Module initialized. v1.2.14
[    3.466358] vendor storage:20190527 ret = 0
[    3.482530] vcc_3v3_sd_s0: supplied by vcc_3v3_s3
[    3.482762] mali fb000000.gpu: Kernel DDK version g12p0-01eac0
[    3.483275] pcie20_avdd0v85: supplied by vdd_0v85_s0
[    3.483613] pcie20_avdd1v8: supplied by avcc_1v8_s0
[    3.483728] mali fb000000.gpu: leakage=20
[    3.483916] pcie30_avdd0v75: supplied by avdd_0v75_s0
[    3.484663] pcie30_avdd1v8: supplied by avcc_1v8_s0
[    3.485103] vcc3v3_lcd0_n: supplied by vcc_1v8_s0
[    3.485732] mali fb000000.gpu: pvtm=891
[    3.485802] mali fb000000.gpu: pvtm-volt-sel=4
[    3.485824] input: adc-keys as /devices/platform/adc-keys/input/input4
[    3.487052] mali fb000000.gpu: avs=0
[    3.489982] W : [File] : drivers/gpu/arm/bifrost/platform/rk/mali_kbase_config_rk.c; [Line] : 136; [Func] : kbase_platform_rk_init(); power-off-delay-ms not available.
[    3.490777] mali fb000000.gpu: GPU hardware issue table may need updating:
[    3.490777] r0p0 status 5 is unknown; treating as r0p0 status 0
[    3.490798] mali fb000000.gpu: GPU identified as 0x7 arch 10.8.6 r0p0 status 0
[    3.490918] mali fb000000.gpu: No priority control manager is configured
[    3.490933] mali fb000000.gpu: No memory group manager is configured
[    3.490972] mali fb000000.gpu: Protected memory allocator not available
[    3.492491] mali fb000000.gpu: Couldn't find power_model DT node matching 'arm,mali-simple-power-model'
[    3.492520] mali fb000000.gpu: Error -22, no DT entry: mali-simple-power-model.static-coefficient = 1*[0]
[    3.492809] mali fb000000.gpu: Error -22, no DT entry: mali-simple-power-model.dynamic-coefficient = 1*[0]
[    3.493066] mali fb000000.gpu: Error -22, no DT entry: mali-simple-power-model.ts = 4*[0]
[    3.493329] mali fb000000.gpu: Error -22, no DT entry: mali-simple-power-model.thermal-zone = ''
[    3.496928] mali fb000000.gpu: Using configured power model mali-lodx-power-model, and fallback mali-simple-power-model
[    3.497137] mali fb000000.gpu: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=800000000 h_table=0
[    3.497922] RKNPU fdab0000.npu: Adding to iommu group 0
[    3.498058] RKNPU fdab0000.npu: RKNPU: rknpu iommu is enabled, using iommu mode
[    3.498552] mali fb000000.gpu: Probed as mali0
[    3.498740] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdab0000-0xfdabffff]
[    3.498760] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdac0000-0xfdacffff]
[    3.498774] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdad0000-0xfdadffff]
[    3.499055] [drm] Initialized rknpu 0.7.2 20220428 for fdab0000.npu on minor 1
[    3.500313] RKNPU fdab0000.npu: leakage=11
[    3.503785] RKNPU fdab0000.npu: pvtm=897
[    3.506009] RKNPU fdab0000.npu: pvtm-volt-sel=4
[    3.506622] RKNPU fdab0000.npu: avs=0
[    3.506763] RKNPU fdab0000.npu: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=800000000 h_table=0
[    3.509843] RKNPU fdab0000.npu: failed to find power_model node
[    3.509862] RKNPU fdab0000.npu: RKNPU: failed to initialize power model
[    3.509871] RKNPU fdab0000.npu: RKNPU: failed to get dynamic-coefficient
[    3.510736] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    3.516050] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    3.516736] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    3.516748] cfg80211: failed to load regulatory.db
[    3.517124] rockchip-pm rockchip-suspend: not set pwm-regulator-config
[    3.518327] I : [File] : drivers/gpu/arm/mali400/mali/linux/mali_kernel_linux.c; [Line] : 405; [Func] : mali_module_init(); svn_rev_string_from_arm of this mali_ko is '', rk_ko_ver is '5', built at '18:48:50', on 'Jan  8 2023'.
[    3.518696] Mali: 
[    3.518699] Mali device driver loaded
[    3.518712] ALSA device list:
[    3.518719]   #0: rockchip-hdmi0
[    3.518726]   #1: rockchip,es8388
[    3.518732]   #2: rockchip,hdmiin
[    3.522511] Freeing unused kernel memory: 6272K
[    3.527388] rk-pcie fe170000.pcie: PCIe Link up, LTSSM is 0x30011
[    3.527620] rk-pcie fe170000.pcie: PCI host bridge to bus 0002:20
[    3.527641] pci_bus 0002:20: root bus resource [bus 20-2f]
[    3.527655] pci_bus 0002:20: root bus resource [??? 0xf2000000-0xf20fffff flags 0x0]
[    3.527672] pci_bus 0002:20: root bus resource [io  0x100000-0x1fffff] (bus address [0xf2100000-0xf21fffff])
[    3.527685] pci_bus 0002:20: root bus resource [mem 0xf2200000-0xf2ffffff]
[    3.527698] pci_bus 0002:20: root bus resource [mem 0x980000000-0x9bfffffff pref]
[    3.527746] pci 0002:20:00.0: [1d87:3588] type 01 class 0x060400
[    3.527778] pci 0002:20:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref]
[    3.527852] pci 0002:20:00.0: supports D1 D2
[    3.527865] pci 0002:20:00.0: PME# supported from D0 D1 D3hot
[    3.537550] Run /init as init process
[    3.538613] pci 0002:20:00.0: Primary bus is hard wired to 0
[    3.538651] pci 0002:20:00.0: bridge configuration invalid ([bus 01-ff]), reconfiguring
[    3.538917] pci 0002:21:00.0: [14e4:449d] type 00 class 0x028000
[    3.539023] pci 0002:21:00.0: reg 0x10: [mem 0x00000000-0x0000ffff 64bit]
[    3.539088] pci 0002:21:00.0: reg 0x18: [mem 0x00000000-0x003fffff 64bit]
[    3.539671] pci 0002:21:00.0: supports D1 D2
[    3.539685] pci 0002:21:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    3.556037] /dev/sda1: Can't open blockdev
[    3.557607] /dev/sda1: Can't open blockdev
mount: mounting /dev/sda1 on /mnt/udisk failed: No such file or directory
[    3.557970] pci_bus 0002:21: busn_res: [bus 21-2f] end is updated to 21
[    3.558017] pci 0002:20:00.0: BAR 8: assigned [mem 0xf2200000-0xf27fffff]
[    3.558037] pci 0002:20:00.0: BAR 6: assigned [mem 0xf2800000-0xf280ffff pref]
[    3.558058] pci 0002:21:00.0: BAR 2: assigned [mem 0xf24000mount: mounting /dev/mmcblk1p10 on /mnt/sdcard failed: No suc0h file or directory
-0xf27fffff 64bit]
[    3.558113] pci 0m0ount: mounting PARTLABEL=oem o0n /oem failed: No such file or2 directory
:21:00.0: BAR 0: assmount: mounting PARTLABEL=useridata on /userdata failed: No sguch file or directory
ned [mem 0xf2200000-0xf220ffff 64bit]
[    3.558165] pci 0002:20:00.0: PCI bridge to [bus 21]
[    3.558179] pci 0002:20:00.0:   bridge window [mem 0xf2200000-0xf27fffff]
[    3.559205] /dev/mmcblk1p1: Can't open blockdev
[    3.560397] /dev/mmcblk1p1: Can't open blockdev
[    3.561307] pcieport 0002:20:00.0: PME: Signaling with IRQ 144
Starting syslogd: OK
Starting klogd: OK
Running sysctl: OK
Populating /dev using udev: [    3.608834] udevd[281]: starting version 3.2.10
[    3.614557] udevd[282]: starting eudev-3.2.10
[    3.702523] r8168 0003:31:00.0 enP3p49s0: renamed from eth0
[    3.724196] usb 4-1: new full-speed USB device number 2 using ohci-platform
[    3.946810] usb 4-1: New USB device found, idVendor=222a, idProduct=0001, bcdDevice= 0.00
[    3.946907] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.946938] usb 4-1: Product: ILITEK-TP
[    3.946966] usb 4-1: Manufacturer: ILITEK
[    3.946994] usb 4-1: SerialNumber: V06.00.00.00
[    3.960330] input: ILITEK ILITEK-TP as /devices/platform/fc8c0000.usb/usb4/4-1/4-1:1.0/0003:222A:0001.0001/input/input5
[    3.961785] hid-multitouch 0003:222A:0001.0001: input,hidraw0: USB HID v1.10 Device [ILITEK ILITEK-TP] on usb-fc8c0000.usb-1/input0
[    3.981592] input: ILITEK ILITEK-TP Mouse as /devices/platform/fc8c0000.usb/usb4/4-1/4-1:1.1/0003:222A:0001.0002/input/input6
[    3.983504] hid-generic 0003:222A:0001.0002: input,hiddev96,hidraw1: USB HID v1.10 Mouse [ILITEK ILITEK-TP] on usb-fc8c0000.usb-1/input1
done
Saving random seed: OK
Starting network: OK
Debug: configfs_init
mkdir: can't create directory '/sys/kernel/config/usb_gadget/rockchip/functions/uac1.gs0': No such file or directory
mkdir: can't create directory '/sys/kernel/config/usb_gadget/rockchip/functions/uac2.gs0': No such file or directory
[    4.410856] file system registered
mkdir: can't create directory '/sys/kernel/config/usb_gadget/rockchip/functions/mtp.gs0': No such file or directory
mkdir: can't create directory '/sys/kernel/config/usb_gadget/rockchip/functions/rndis.gs0': No such file or directory
[    4.425204] Mass Storage Function, version: 2009/09/11
[    4.425237] LUN: removable file: (no medium)
mkdir: can't create directory '/sys/kernel/config/usb_gadget/rockchip/functions/hid.usb0': No such file or directory
[    4.454092] read descriptors
[    4.454139] read strings
[    5.192396] dwhdmi-rockchip fde80000.hdmi: use tmds mode
Starting input-event-daemon: [    5.470434] dwc3 fc000000.usb: device reset
input-event-daemon: Start parsing /etc/input-event-daemon.conf...
input-event-daemon: Adding device: /dev/input/event0...
input-event-daemon: Adding device: /dev/input/event1...
input-event-daemon: Adding device: /dev/input/event2...
input-event-daemon: Adding device: /dev/input/event3...
input-event-daemon: Adding device: /dev/input/event4...
input-event-daemon: Adding device: /dev/input/event5...
input-event-daemon: Adding device: /dev/input/event6...
input-event-daemon: Start listening on 7 devices...
done
sh: groups: command not found
root@RK3588:/# [    5.667261] rk-pcie fe150000.pcie: PCIe Link Fail
[    5.667278] rk-pcie fe150000.pcie: failed to initialize host
[    8.427366] android_work: sent uevent USB_STATE=CONNECTED
[    8.509341] android_work: sent uevent USB_STATE=CONFIGURED

root@RK3588:/# 
root@RK3588:/# 
root@RK3588:/# 
root@RK3588:/# 
root@RK3588:/# 
root@RK3588:/# 
root@RK3588:/# 
root@RK3588:/# [   21.345318] EXT4-fs (mmcblk0p8): mounting ext2 file system using the ext4 subsystem
[   21.349705] EXT4-fs (mmcblk0p8): mounted filesystem without journal. Opts: 
[   22.462000] rk860-regulator 2-0042: rk860..... reset
[   22.462839] rk860-regulator 2-0042: force rk860x_reset ok!
[   22.463351] rk860-regulator 0-0043: rk860..... reset
[   22.464790] rk860-regulator 0-0043: force rk860x_reset ok!
[   22.465281] rk860-regulator 0-0042: rk860..... reset
[   22.466604] rk860-regulator 0-0042: force rk860x_reset ok!
[   22.471893] rockchip-vop2 fdd90000.vop: [drm:vop2_crtc_atomic_disable] Crtc atomic disable vp0
[   22.505166] mpp_av1dec av1d-master: shutdown device
[   22.505597] mpp_av1dec av1d-master: shutdown success
[   22.506115] [WLAN_RFKILL]: Enter rfkill_wlan_shutdown
[   22.506562] [WLAN_RFKILL]: rockchip_wifi_power: 0
[   22.506978] [WLAN_RFKILL]: rockchip_wifi_power: toggle = false
[   22.507500] wifi power off
[   22.613918] [WLAN_RFKILL]: wifi shut off power [GPIO105-0]
[   22.614406] [WLAN_RFKILL]: rfkill_set_wifi_bt_power: 0
[   22.614956] xhci-hcd xhci-hcd.7.auto: remove, state 4
[   22.615409] usb usb6: USB disconnect, device number 1
[   22.616137] xhci-hcd xhci-hcd.7.auto: USB bus 6 deregistered
[   22.616688] xhci-hcd xhci-hcd.7.auto: remove, state 4
[   22.617138] usb usb5: USB disconnect, device number 1
[   22.618057] xhci-hcd xhci-hcd.7.auto: USB bus 5 deregistered
[   22.619046] mpp_rkvdec2 fdc48100.rkvdec-core: shutdown device
[   22.619551] mpp_rkvdec2 fdc48100.rkvdec-core: shutdown success
[   22.620074] mpp_rkvdec2 fdc38100.rkvdec-core: shutdown device
[   22.620593] mpp_rkvdec2 fdc38100.rkvdec-core: shutdown success
[   22.621120] mpp_rkvenc2 fdbe0000.rkvenc-core: shutdown device
[   22.621623] mpp_rkvenc2 fdbe0000.rkvenc-core: shutdown success
[   22.622151] mpp_rkvenc2 fdbd0000.rkvenc-core: shutdown device
[   22.622654] mpp_rkvenc2 fdbd0000.rkvenc-core: shutdown success
[   22.623180] mpp-iep2 fdbb0000.iep: shutdown device
[   22.623597] mpp-iep2 fdbb0000.iep: shutdown success
[   22.624039] mpp_vepu2 fdbac000.jpege-core: shutdown device
[   22.624520] mpp_vepu2 fdbac000.jpege-core: shutdown success
[   22.625020] mpp_vepu2 fdba8000.jpege-core: shutdown device
[   22.625501] mpp_vepu2 fdba8000.jpege-core: shutdown success
[   22.626001] mpp_vepu2 fdba4000.jpege-core: shutdown device
[   22.626481] mpp_vepu2 fdba4000.jpege-core: shutdown success
[   22.626982] mpp_vepu2 fdba0000.jpege-core: shutdown device
[   22.627467] mpp_vepu2 fdba0000.jpege-core: shutdown success
[   22.627966] mpp_jpgdec fdb90000.jpegd: shutdown device
[   22.628413] mpp_jpgdec fdb90000.jpegd: shutdown success
[   22.628894] mpp_vdpu2 fdb50400.vdpu: shutdown device
[   22.629331] mpp_vdpu2 fdb50400.vdpu: shutdown success
[   22.630629] android_work: sent uevent USB_STATE=DISCONNECTED
[   22.631821] reboot: Restarting system
DDR Version V1.07 20220412
LPDDR4X, 2112MHz
channel[0] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
channel[1] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
channel[2] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
channel[3] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
change to F1: 528MHz
change to F2: 1068MHz
change to F3: 1560MHz
change to F0: 2112MHz
out
U-Boot SPL board init
U-Boot SPL 2017.09-gc060f28d70-220414 #zyf (Apr 18 2022 - 18:13:34)
Failed to set cpub01
Failed to set cpub23
unknown raw ID phN
unrecognized JEDEC id bytes: 00, 00, 00
Trying to boot from MMC2
MMC: no card present
mmc_init: -123, time 0
spl: mmc init failed with error: -123
Trying to boot from MMC1
Trying fit image at 0x4000 sector
## Verified-boot: 0
## Checking atf-1 0x00040000 ... sha256(5ae6932916...) + OK
## Checking uboot 0x00200000 ... sha256(3c90ad01c7...) + OK
## Checking fdt 0x00327600 ... sha256(c07f4a4d71...) + OK
## Checking atf-2 0x000f0000 ... sha256(c00c7fd75b...) + OK
## Checking atf-3 0xff100000 ... sha256(71c3a5841b...) + OK
## Checking atf-4 0xff001000 ... sha256(2301cf73be...) + OK
## Checking optee 0x08400000 ... sha256(4ed9cd20b5...) + OK
Jumping to U-Boot(0x00200000) via ARM Trusted Firmware(0x00040000)
Total: 118.31 ms

INFO:    Preloader serial: 2
NOTICE:  BL31: v2.3():v2.3-384-g45c8fcb44:derrick.huang
NOTICE:  BL31: Built : 15:14:04, Jun 18 2022
INFO:    ext 32k is valid
INFO:    GICv3 without legacy support detected.
INFO:    ARM GICv3 driver initialized in EL3
INFO:    system boots from cpu-hwid-0
INFO:    idle_st=0x21fff, pd_st=0x11fff9, repair_st=0xfff70001
INFO:    dfs DDR fsp_params[0].freq_mhz= 2112MHz
INFO:    dfs DDR fsp_params[1].freq_mhz= 528MHz
INFO:    dfs DDR fsp_params[2].freq_mhz= 1068MHz
INFO:    dfs DDR fsp_params[3].freq_mhz= 1560MHz
INFO:    BL31: Initialising Exception Handling Framework
INFO:    BL31: Initializing runtime services
INFO:    BL31: Initializing BL32
INFO:    hdmirx_handler: dma not on, ret
I/TC: 
I/TC: OP-TEE version: 3.13.0-645-g87d94c5ef8 #xb.wang (gcc version 10.2.1 20201103 (GNU Toolchain for the A-profile Architecture 10.2-2020.11 (arm-10.16))) #1 Tue Jun 14 10:44:31 CST 2022 aarch64
I/TC: Primary CPU initializing
I/TC: Primary CPU switching to normal world boot
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0x200000
INFO:    SPSR = 0x3c9

U-Boot 2017.09 (Jan 08 2023 - 18:33:24 +0800)

Model: Rockchip RK3588 Evaluation Board
PreSerial: 2, raw, 0xfeb50000
DRAM:  7.7 GiB
Sysmem: init
Relocation Offset: edb4f000
Relocation fdt: eb9fa2e8 - eb9fece8
CR: M/C/I
Using default environment

mmc@fe2c0000: 1, mmc@fe2e0000: 0
Bootdev(atags): mmc 0
MMC0: HS200, 200Mhz
PartType: EFI
DM: v2
boot mode: normal
FIT: no signed, no conf required
DTB: rk-kernel.dtb
HASH(c): OK
Pre-reloc: vcc_mipicsi1
I2c0 speed: 100000Hz
vsel-gpios- not found!
en-gpios- not found!
vdd_cpu_big0_s0 800000 uV
vsel-gpios- not found!
en-gpios- not found!
vdd_cpu_big1_s0 800000 uV
I2c2 speed: 400000Hz
vsel-gpios- not found!
en-gpios- not found!
vdd_npu_s0 800000 uV
spi2: RK806: 2
ON=0x00, OFF=0x00
vdd_gpu_s0 750000 uV
vdd_cpu_lit_s0 750000 uV
vdd_log_s0 750000 uV
vdd_vdenc_s0 init 750000 uV
vdd_ddr_s0 850000 uV
Model: Rockchip RK3588 TOYBRICK X10 Board
CLK: (uboot. arm: enter 1008000 KHz, init 1008000 KHz, kernel 0N/A)
  b0pll 24000 KHz
  b1pll 24000 KHz
  lpll 24000 KHz
  v0pll 24000 KHz
  aupll 786431 KHz
  cpll 1500000 KHz
  gpll 1188000 KHz
  npll 850000 KHz
  ppll 1100000 KHz
  aclk_center_root 702000 KHz
  pclk_center_root 100000 KHz
  hclk_center_root 396000 KHz
  aclk_center_low_root 500000 KHz
  aclk_top_root 594000 KHz
  pclk_top_root 100000 KHz
  aclk_low_top_root 396000 KHz
Net:   eth0: ethernet@fe1b0000
Hit key to stop autoboot('CTRL+C'):  0 
ANDROID: reboot reason: "(none)"
optee api revision: 2.0
TEEC: Waring: Could not find security partition
Not AVB images, AVB skip
No valid android hdr
Android image load failed
Android boot failed, error -1.
## Booting FIT Image at 0xe9a37ac0 with size 0x01dc1800
Fdt Ramdisk skip relocation
## Loading kernel from FIT Image at e9a37ac0 ...
   Using 'conf' configuration
## Verified-boot: 0
   Trying 'kernel' kernel subimage
     Description:  unavailable
     Type:         Kernel Image
     Compression:  uncompressed
     Data Start:   0xe9a600c0
     Data Size:    31035904 Bytes = 29.6 MiB
     Architecture: AArch64
     OS:           Linux
     Load Address: 0x00400000
     Entry Point:  0x00400000
     Hash algo:    sha256
     Hash value:   6e3d6585f1f05c533d5b233f06d52154658e547e73cbf57c75d9af7cce178ecf
   Verifying Hash Integrity ... sha256+ OK
## Loading fdt from FIT Image at e9a37ac0 ...
   Using 'conf' configuration
   Trying 'fdt' fdt subimage
     Description:  unavailable
     Type:         Flat Device Tree
     Compression:  uncompressed
     Data Start:   0xe9a382c0
     Data Size:    163034 Bytes = 159.2 KiB
     Architecture: AArch64
     Load Address: 0x0a100000
     Hash algo:    sha256
     Hash value:   7bd221e89cf62319742ab2cf1317346fb93be8bf32cdf3cd41e0f6be09cea7bd
   Verifying Hash Integrity ... sha256+ OK
   Loading fdt from 0x0a100000 to 0x0a100000
   Booting using the fdt blob at 0x0a100000
   Loading Kernel Image from 0xe9a600c0 to 0x00400000 ... OK
   kernel loaded at 0x00400000, end = 0x02199200
  'reserved-memory' cma: addr=10000000 size=8000000
   Using Device Tree in place at 000000000a100000, end 000000000a12acd9
Adding bank: 0x00200000 - 0x08400000 (size: 0x08200000)
Adding bank: 0x09400000 - 0xf0000000 (size: 0xe6c00000)
Adding bank: 0x100000000 - 0x200000000 (size: 0x100000000)
Total: 515.930 ms

Starting kernel ...

[    0.632122] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
[    0.632143] Linux version 5.10.66 (rootroot@rootroot-adol-ADOLBOOK-I421UAY-ADOL14UA) (aarch64-none-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture 10.3-2021.07 (arm-10.29)) 10.3.1 20210621, GNU ld (GNU Toolchain for the A-profile Architecture 10.3-2021.07 (arm-10.29)) 2.36.1.20210621) #1 SMP Sun Jan 8 18:46:14 CST 2023
[    0.642885] Machine model: Rockchip RK3588 TOYBRICK X10 Board
[    0.642957] earlycon: uart8250 at MMIO32 0x00000000feb50000 (options '')
[    0.647359] printk: bootconsole [uart8250] enabled
[    0.650283] efi: UEFI not found.
[    0.656280] OF: fdt: Reserved memory: failed to reserve memory for node 'drm-logo@00000000': base 0x0000000000000000, size 0 MiB
[    0.657355] OF: fdt: Reserved memory: failed to reserve memory for node 'drm-cubic-lut@00000000': base 0x0000000000000000, size 0 MiB
[    0.658507] Reserved memory: created CMA memory pool at 0x0000000010000000, size 128 MiB
[    0.659253] OF: reserved mem: initialized node cma, compatible id shared-dma-pool
[    0.796585] Zone ranges:
[    0.796827]   DMA      [mem 0x0000000000200000-0x00000000ffffffff]
[    0.797403]   DMA32    empty
[    0.797673]   Normal   [mem 0x0000000100000000-0x00000001ffffffff]
[    0.798246] Movable zone start for each node
[    0.798640] Early memory node ranges
[    0.798973]   node   0: [mem 0x0000000000200000-0x00000000083fffff]
[    0.799552]   node   0: [mem 0x0000000009400000-0x00000000efffffff]
[    0.800133]   node   0: [mem 0x0000000100000000-0x00000001ffffffff]
[    0.800714] Initmem setup node 0 [mem 0x0000000000200000-0x00000001ffffffff]
[    0.845768] psci: probing for conduit method from DT.
[    0.846242] psci: PSCIv1.1 detected in firmware.
[    0.846668] psci: Using standard PSCI v0.2 function IDs
[    0.847153] psci: Trusted OS migration not required
[    0.847605] psci: SMC Calling Convention v1.2
[    0.848370] percpu: Embedded 30 pages/cpu s83816 r8192 d30872 u122880
[    0.849161] Detected VIPT I-cache on CPU0
[    0.849574] CPU features: detected: GIC system register CPU interface
[    0.850169] CPU features: detected: Virtualization Host Extensions
[    0.850743] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.851391] alternatives: patching kernel code
[    0.852086] Built 1 zonelists, mobility grouping on.  Total pages: 1995336
[    0.852725] Kernel command line: storagemedia=emmc androidboot.storagemedia=emmc androidboot.mode=normal  androidboot.verifiedbootstate=orange rw rootwait earlycon=uart8250,mmio32,0xfeb50000 console=ttyFIQ0 irqchip.gicv3_pseudo_nmi=0 root=PARTUUID=614e0000-0000
[    0.855920] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.857029] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.857751] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.864316] software IO TLB: mapped [mem 0x00000000ec000000-0x00000000f0000000] (64MB)
[    0.932842] Memory: 7723096K/8108032K available (15040K kernel code, 3172K rwdata, 5704K rodata, 6272K init, 517K bss, 253864K reserved, 131072K cma-reserved)
[    0.934284] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.934917] ftrace: allocating 56951 entries in 223 pages
[    1.025763] ftrace: allocated 223 pages with 7 groups
[    1.026507] rcu: Hierarchical RCU implementation.
[    1.026946] rcu:     RCU event tracing is enabled.
[    1.027366]     Rude variant of Tasks RCU enabled.
[    1.027785] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[    1.033633] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    1.036341] GICv3: GIC: Using split EOI/Deactivate mode
[    1.036826] GICv3: 480 SPIs implemented
[    1.037181] GICv3: 0 Extended SPIs implemented
[    1.037622] GICv3: Distributor has no Range Selector support
[    1.038149] GICv3: 16 PPIs implemented
[    1.038538] GICv3: CPU0: found redistributor 0 region 0:0x00000000fe680000
[    1.039284] ITS [mem 0xfe640000-0xfe65ffff]
[    1.039718] ITS@0x00000000fe640000: allocated 8192 Devices @1001e0000 (indirect, esz 8, psz 64K, shr 0)
[    1.040606] ITS@0x00000000fe640000: allocated 32768 Interrupt Collections @1001f0000 (flat, esz 2, psz 64K, shr 0)
[    1.041563] ITS: using cache flushing for cmd queue
[    1.042046] ITS [mem 0xfe660000-0xfe67ffff]
[    1.042474] ITS@0x00000000fe660000: allocated 8192 Devices @100210000 (indirect, esz 8, psz 64K, shr 0)
[    1.043359] ITS@0x00000000fe660000: allocated 32768 Interrupt Collections @100220000 (flat, esz 2, psz 64K, shr 0)
[    1.044313] ITS: using cache flushing for cmd queue
[    1.044917] GICv3: using LPI property table @0x0000000100230000
[    1.045578] GIC: using cache flushing for LPI property table
[    1.046107] GICv3: CPU0: using allocated LPI pending table @0x0000000100240000
[    1.046937] random: get_random_bytes called from start_kernel+0x3dc/0x5c8 with crng_init=0
[    1.162853] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    1.164163] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    1.165148] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    1.166980] Console: colour dummy device 80x25
[    1.167413] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000)
[    1.168351] pid_max: default: 32768 minimum: 301
[    1.168906] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    1.169615] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    1.171916] rcu: Hierarchical SRCU implementation.
[    1.173166] Platform MSI: msi-controller@fe640000 domain created
[    1.173754] Platform MSI: msi-controller@fe660000 domain created
[    1.174595] PCI/MSI: /interrupt-controller@fe600000/msi-controller@fe640000 domain created
[    1.175371] PCI/MSI: /interrupt-controller@fe600000/msi-controller@fe660000 domain created
[    1.176249] EFI services will not be available.
[    1.176989] smp: Bringing up secondary CPUs ...
I/TC: Secondary CPU 1 initializing
I/TC: Secondary CPU 1 switching to normal world boot
I/TC: Secondary CPU 2 initializing
I/TC: Secondary CPU 2 switching to normal world boot
I/TC: Secondary CPU 3 initializing
I/TC: Secondary CPU 3 switching to normal world boot
I/TC: Secondary CPU 4 initializing
I/TC: Secondary CPU 4 switching to normal world boot
I/TC: Secondary CPU 5 initializing
I/TC: Secondary CPU 5 switching to normal world boot
I/TC: Secondary CPU 6 initializing
I/TC: Secondary CPU 6 switching to normal world boot
I/TC: Secondary CPU 7 initializing
I/TC: Secondary CPU 7 switching to normal world boot
[    1.178627] Detected VIPT I-cache on CPU1
[    1.178662] GICv3: CPU1: found redistributor 100 region 0:0x00000000fe6a0000
[    1.178680] GICv3: CPU1: using allocated LPI pending table @0x0000000100250000
[    1.178722] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
[    1.179992] Detected VIPT I-cache on CPU2
[    1.180021] GICv3: CPU2: found redistributor 200 region 0:0x00000000fe6c0000
[    1.180038] GICv3: CPU2: using allocated LPI pending table @0x0000000100260000
[    1.180077] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
[    1.181322] Detected VIPT I-cache on CPU3
[    1.181348] GICv3: CPU3: found redistributor 300 region 0:0x00000000fe6e0000
[    1.181365] GICv3: CPU3: using allocated LPI pending table @0x0000000100270000
[    1.181401] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
[    1.182631] CPU features: detected: Spectre-v4
[    1.182635] Detected PIPT I-cache on CPU4
[    1.182649] GICv3: CPU4: found redistributor 400 region 0:0x00000000fe700000
[    1.182658] GICv3: CPU4: using allocated LPI pending table @0x0000000100280000
[    1.182681] CPU4: Booted secondary processor 0x0000000400 [0x414fd0b0]
[    1.183873] Detected PIPT I-cache on CPU5
[    1.183889] GICv3: CPU5: found redistributor 500 region 0:0x00000000fe720000
[    1.183898] GICv3: CPU5: using allocated LPI pending table @0x0000000100290000
[    1.183922] CPU5: Booted secondary processor 0x0000000500 [0x414fd0b0]
[    1.185154] Detected PIPT I-cache on CPU6
[    1.185168] GICv3: CPU6: found redistributor 600 region 0:0x00000000fe740000
[    1.185178] GICv3: CPU6: using allocated LPI pending table @0x00000001002a0000
[    1.185201] CPU6: Booted secondary processor 0x0000000600 [0x414fd0b0]
[    1.186383] Detected PIPT I-cache on CPU7
[    1.186398] GICv3: CPU7: found redistributor 700 region 0:0x00000000fe760000
[    1.186407] GICv3: CPU7: using allocated LPI pending table @0x00000001002b0000
[    1.186431] CPU7: Booted secondary processor 0x0000000700 [0x414fd0b0]
[    1.186496] smp: Brought up 1 node, 8 CPUs
[    1.203047] SMP: Total of 8 processors activated.
[    1.203478] CPU features: detected: Privileged Access Never
[    1.203987] CPU features: detected: User Access Override
[    1.204473] CPU features: detected: 32-bit EL0 Support
[    1.204941] CPU features: detected: Common not Private translations
[    1.205521] CPU features: detected: RAS Extension Support
[    1.206014] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    1.206797] CPU features: detected: CRC32 instructions
[    1.207266] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    1.207902] CPU features: detected: RCpc load-acquire (LDAPR)
[    1.208508] CPU: All CPU(s) started at EL2
[    1.210226] devtmpfs: initialized
[    1.220322] Registered cp15_barrier emulation handler
[    1.220786] Registered setend emulation handler
[    1.221268] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    1.222152] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    1.224002] pinctrl core: initialized pinctrl subsystem
[    1.224731] DMI not present or invalid.
[    1.225187] NET: Registered protocol family 16
[    1.226435] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[    1.227165] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    1.228451] thermal_sys: Registered thermal governor 'fair_share'
[    1.228453] thermal_sys: Registered thermal governor 'step_wise'
[    1.229003] thermal_sys: Registered thermal governor 'user_space'
[    1.229553] thermal_sys: Registered thermal governor 'power_allocator'
[    1.230235] thermal thermal_zone1: power_allocator: sustainable_power will be estimated
[    1.231579] thermal thermal_zone2: power_allocator: sustainable_power will be estimated
[    1.232328] thermal thermal_zone3: power_allocator: sustainable_power will be estimated
[    1.233082] thermal thermal_zone4: power_allocator: sustainable_power will be estimated
[    1.233831] thermal thermal_zone5: power_allocator: sustainable_power will be estimated
[    1.234580] thermal thermal_zone6: power_allocator: sustainable_power will be estimated
[    1.235316] cpuidle: using governor menu
[    1.235676] Registered FIQ tty driver
[    1.236160] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    1.236886] ASID allocator initialised with 65536 entries
[    1.239056] printk: console [ramoops-1] enabled
[    1.239466] pstore: Registered ramoops as persistent store backend
[    1.240029] ramoops: using 0xf0000@0x110000, ecc: 0
[    1.280507] rockchip-gpio fd8a0000.gpio: probed /pinctrl/gpio@fd8a0000
[    1.281302] rockchip-gpio fec20000.gpio: probed /pinctrl/gpio@fec20000
[    1.282084] rockchip-gpio fec30000.gpio: probed /pinctrl/gpio@fec30000
[    1.282884] rockchip-gpio fec40000.gpio: probed /pinctrl/gpio@fec40000
[    1.283735] rockchip-gpio fec50000.gpio: probed /pinctrl/gpio@fec50000
[    1.284347] rockchip-pinctrl pinctrl: probed pinctrl
[    1.296903] fiq_debugger fiq_debugger.0: IRQ fiq not found
[    1.297402] fiq_debugger fiq_debugger.0: IRQ wakeup not found
[    1.297920] fiq_debugger_probe: could not install nmi irq handler
[ [    1.298509] printk: console [ttyFIQ0] enabled
   1.298509] printk: console [ttyFIQ0] enabled
[    1.299278] printk: bootconsole [uart8250] disabled
[    1.299278] printk: bootconsole [uart8250] disabled
[    1.299799] Registered fiq debugger ttyFIQ0
[    1.300120] vcc5v0_sys: supplied by vcc12v_dcin
[    1.300255] vcc5v0_usbdcin: supplied by vcc12v_dcin
[    1.300376] vcc5v0_usb: supplied by vcc5v0_usbdcin
[    1.300526] vcc_1v1_nldo_s3: supplied by vcc5v0_sys
[    1.300754] vbus5v0_typec: supplied by vcc5v0_usb
[    1.300879] vcc3v3_pcie30: supplied by vcc12v_dcin
[    1.300980] vcc5v0_host: supplied by vcc5v0_usb
[    1.301312] debugfs: Directory 'vcc_mipicsi1' with parent 'regulator' already present!
[    1.301321] debugfs: Directory 'vcc_mipicsi1' with parent 'vcc_mipicsi1' already present!
[    1.301570] iommu: Default domain type: Translated 
[    1.301643] rk_iommu fdab9000.iommu: version = 2
[    1.301999] rk_iommu fdb50800.iommu: version = 2
[    1.302233] rk_iommu fdb60f00.iommu: version = 2
[    1.302406] rk_iommu fdb70f00.iommu: version = 2
[    1.302564] rk_iommu fdb90480.iommu: version = 2
[    1.302738] rk_iommu fdba0800.iommu: version = 2
[    1.302910] rk_iommu fdba4800.iommu: version = 2
[    1.303087] rk_iommu fdba8800.iommu: version = 2
[    1.303263] rk_iommu fdbac800.iommu: version = 2
[    1.303437] rk_iommu fdbb0800.iommu: version = 2
[    1.303657] rk_iommu fdbdf000.iommu: version = 2
[    1.303920] rk_iommu fdbef000.iommu: version = 2
[    1.304192] rk_iommu fdc38700.iommu: version = 2
[    1.304464] rk_iommu fdc48700.iommu: version = 2
[    1.304595] rk_iommu fdd97e00.iommu: version = 2
[    1.304894] SCSI subsystem initialized
[    1.304971] usbcore: registered new interface driver usbfs
[    1.304988] usbcore: registered new interface driver hub
[    1.305003] usbcore: registered new device driver usb
[    1.305036] mc: Linux media interface: v0.10
[    1.305047] videodev: Linux video capture interface: v2.00
[    1.305074] pps_core: LinuxPPS API ver. 1 registered
[    1.305078] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.305085] PTP clock support registered
[    1.305330] arm-scmi firmware:scmi: SCMI Notifications - Core Enabled.
[    1.305363] arm-scmi firmware:scmi: SCMI Protocol v2.0 'rockchip:' Firmware version 0x0
[    1.306415] Advanced Linux Sound Architecture Driver Initialized.
[    1.306594] Bluetooth: Core ver 2.22
[    1.306608] NET: Registered protocol family 31
[    1.306611] Bluetooth: HCI device and connection manager initialized
[    1.306617] Bluetooth: HCI socket layer initialized
[    1.306621] Bluetooth: L2CAP socket layer initialized
[    1.306628] Bluetooth: SCO socket layer initialized
[    1.307909] rockchip-cpuinfo cpuinfo: SoC        : 35880000
[    1.307915] rockchip-cpuinfo cpuinfo: Serial        : d2849f234f75f93a
[    1.308226] clocksource: Switched to clocksource arch_sys_counter
[    1.601493] NET: Registered protocol family 2
[    1.601605] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    1.603446] tcp_listen_portaddr_hash hash table entries: 4096 (order: 5, 163840 bytes, linear)
[    1.603535] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    1.603854] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[    1.604562] TCP: Hash tables configured (established 65536 bind 65536)
[    1.604614] UDP hash table entries: 4096 (order: 6, 393216 bytes, linear)
[    1.604757] UDP-Lite hash table entries: 4096 (order: 6, 393216 bytes, linear)
[    1.605009] NET: Registered protocol family 1
[    1.605270] RPC: Registered named UNIX socket transport module.
[    1.605277] RPC: Registered udp transport module.
[    1.605280] RPC: Registered tcp transport module.
[    1.605284] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.605603] PCI: CLS 0 bytes, default 64
[    1.606436] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    1.608215] Initialise system trusted keyrings
[    1.608280] workingset: timestamp_bits=62 max_order=21 bucket_order=0
[    1.610256] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.610502] NFS: Registering the id_resolver key type
[    1.610511] Key type id_resolver registered
[    1.610515] Key type id_legacy registered
[    1.610531] ntfs: driver 2.1.32 [Flags: R/O].
[    1.610610] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    1.610695] fuse: init (API version 7.32)
[    1.610817] SGI XFS with security attributes, no debug enabled
[    1.630924] NET: Registered protocol family 38
[    1.630932] Key type asymmetric registered
[    1.630936] Asymmetric key parser 'x509' registered
[    1.630950] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
[    1.630955] io scheduler mq-deadline registered
[    1.630958] io scheduler kyber registered
[    1.638602] rockchip-hdptx-phy-hdmi fed60000.hdmiphy: hdptx phy init success
[    1.640808] rk-pcie fe180000.pcie: invalid prsnt-gpios property in node
[    1.640835] rk-pcie fe180000.pcie: no vpcie3v3 regulator found
[    1.640990] rk-pcie fe150000.pcie: invalid prsnt-gpios property in node
[    1.641007] rk-pcie fe180000.pcie: missing legacy IRQ resource
[    1.641018] rk-pcie fe180000.pcie: IRQ msi not found
[    1.641022] rk-pcie fe180000.pcie: use outband MSI support
[    1.641026] rk-pcie fe180000.pcie: Missing *config* reg space
[    1.641033] rk-pcie fe180000.pcie: host bridge /pcie@fe180000 ranges:
[    1.641047] rk-pcie fe180000.pcie:      err 0x00f3000000..0x00f30fffff -> 0x00f3000000
[    1.641055] rk-pcie fe180000.pcie:       IO 0x00f3100000..0x00f31fffff -> 0x00f3100000
[    1.641066] rk-pcie fe180000.pcie:      MEM 0x00f3200000..0x00f3ffffff -> 0x00f3200000
[    1.641087] rk-pcie fe180000.pcie:      MEM 0x09c0000000..0x09ffffffff -> 0x09c0000000
[    1.641089] rk-pcie fe170000.pcie: invalid prsnt-gpios property in node
[    1.641113] rk-pcie fe170000.pcie: no vpcie3v3 regulator found
[    1.641123] rk-pcie fe180000.pcie: Missing *config* reg space
[    1.641148] rk-pcie fe180000.pcie: invalid resource
[    1.641250] rk-pcie fe170000.pcie: missing legacy IRQ resource
[    1.641261] rk-pcie fe170000.pcie: IRQ msi not found
[    1.641264] rk-pcie fe170000.pcie: use outband MSI support
[    1.641267] rk-pcie fe170000.pcie: Missing *config* reg space
[    1.641272] rk-pcie fe170000.pcie: host bridge /pcie@fe170000 ranges:
[    1.641275] pwm-backlight backlight: supply power not found, using dummy regulator
[    1.641290] rk-pcie fe170000.pcie:      err 0x00f2000000..0x00f20fffff -> 0x00f2000000
[    1.641298] rk-pcie fe170000.pcie:       IO 0x00f2100000..0x00f21fffff -> 0x00f2100000
[    1.641306] rk-pcie fe170000.pcie:      MEM 0x00f2200000..0x00f2ffffff -> 0x00f2200000
[    1.641312] rk-pcie fe170000.pcie:      MEM 0x0980000000..0x09bfffffff -> 0x0980000000
[    1.641335] rk-pcie fe170000.pcie: Missing *config* reg space
[    1.641358] rk-pcie fe170000.pcie: invalid resource
[    1.641425] mpp_service mpp-srv: unknown mpp version for missing VCS info
[    1.641430] mpp_service mpp-srv: probe start
[    1.642690] mpp_vdpu2 fdb50400.vdpu: Adding to iommu group 1
[    1.642897] mpp_vdpu2 fdb50400.vdpu: probe device
[    1.642994] mpp_vdpu2 fdb50400.vdpu: reset group is empty!
[    1.642999] vdpu_init:501: No aclk reset resource define
[    1.643003] mpp_vdpu2 fdb50400.vdpu: reset group is empty!
[    1.643007] vdpu_init:504: No hclk reset resource define
[    1.643084] mpp_vdpu2 fdb50400.vdpu: probing finish
[    1.643281] mpp_vepu2 jpege-ccu: probing start
[    1.643286] mpp_vepu2 jpege-ccu: probing finish
[    1.643393] mpp_vepu2 fdba0000.jpege-core: Adding to iommu group 5
[    1.643524] mpp_vepu2 fdba0000.jpege-core: probing start
[    1.643627] mpp_vepu2 fdba0000.jpege-core: attach ccu success
[    1.643712] mpp_vepu2 fdba0000.jpege-core: probing finish
[    1.643802] mpp_vepu2 fdba4000.jpege-core: Adding to iommu group 6
[    1.643932] mpp_vepu2 fdba4000.jpege-core: probing start
[    1.644027] mpp_vepu2 fdba4000.jpege-core: attach ccu success
[    1.644103] mpp_vepu2 fdba4000.jpege-core: probing finish
[    1.644202] mpp_vepu2 fdba8000.jpege-core: Adding to iommu group 7
[    1.644330] mpp_vepu2 fdba8000.jpege-core: probing start
[    1.644422] mpp_vepu2 fdba8000.jpege-core: attach ccu success
[    1.644499] mpp_vepu2 fdba8000.jpege-core: probing finish
[    1.644600] mpp_vepu2 fdbac000.jpege-core: Adding to iommu group 8
[    1.644727] mpp_vepu2 fdbac000.jpege-core: probing start
[    1.644820] mpp_vepu2 fdbac000.jpege-core: attach ccu success
[    1.644902] mpp_vepu2 fdbac000.jpege-core: probing finish
[    1.645168] mpp-iep2 fdbb0000.iep: Adding to iommu group 9
[    1.645295] mpp-iep2 fdbb0000.iep: probe device
[    1.645405] mpp-iep2 fdbb0000.iep: allocate roi buffer failed
[    1.645475] mpp-iep2 fdbb0000.iep: probing finish
[    1.645664] mpp_jpgdec fdb90000.jpegd: Adding to iommu group 4
[    1.645856] mpp_jpgdec fdb90000.jpegd: probe device
[    1.646035] mpp_jpgdec fdb90000.jpegd: probing finish
[    1.646380] mpp_rkvdec2 fdc30000.rkvdec-ccu: rkvdec-ccu, probing start
[    1.646435] mpp_rkvdec2 fdc30000.rkvdec-ccu: probing finish
[    1.646517] mpp_rkvdec2 fdc38100.rkvdec-core: Adding to iommu group 12
[    1.646753] mpp_rkvdec2 fdc38100.rkvdec-core: rkvdec-core, probing start
[    1.646857] mpp_rkvdec2 fdc38100.rkvdec-core: shared_niu_a is not found!
[    1.646862] rkvdec2_init:697: No niu aclk reset resource define
[    1.646867] mpp_rkvdec2 fdc38100.rkvdec-core: shared_niu_h is not found!
[    1.646871] rkvdec2_init:700: No niu hclk reset resource define
[    1.646928] mpp_rkvdec2 fdc38100.rkvdec-core: core_mask=00010001
[    1.646932] mpp_rkvdec2 fdc38100.rkvdec-core: attach ccu as core 0
[    1.647070] mpp_rkvdec2 fdc38100.rkvdec-core: sram_start 0x00000000ff001000
[    1.647074] mpp_rkvdec2 fdc38100.rkvdec-core: rcb_iova 0x00000000fff00000
[    1.647078] mpp_rkvdec2 fdc38100.rkvdec-core: sram_size 491520
[    1.647082] mpp_rkvdec2 fdc38100.rkvdec-core: rcb_size 1048576
[    1.647086] mpp_rkvdec2 fdc38100.rkvdec-core: min_width 512
[    1.647116] mpp_rkvdec2 fdc38100.rkvdec-core: probing finish
[    1.647185] mpp_rkvdec2 fdc48100.rkvdec-core: Adding to iommu group 13
[    1.647393] mpp_rkvdec2 fdc48100.rkvdec-core: rkvdec-core, probing start
[    1.647497] mpp_rkvdec2 fdc48100.rkvdec-core: shared_niu_a is not found!
[    1.647501] rkvdec2_init:697: No niu aclk reset resource define
[    1.647506] mpp_rkvdec2 fdc48100.rkvdec-core: shared_niu_h is not found!
[    1.647509] rkvdec2_init:700: No niu hclk reset resource define
[    1.647556] mpp_rkvdec2 fdc48100.rkvdec-core: core_mask=00020002
[    1.647573] mpp_rkvdec2 fdc48100.rkvdec-core: attach ccu as core 1
[    1.647731] mpp_rkvdec2 fdc48100.rkvdec-core: sram_start 0x00000000ff079000
[    1.647735] mpp_rkvdec2 fdc48100.rkvdec-core: rcb_iova 0x00000000ffe00000
[    1.647739] mpp_rkvdec2 fdc48100.rkvdec-core: sram_size 487424
[    1.647743] mpp_rkvdec2 fdc48100.rkvdec-core: rcb_size 1048576
[    1.647748] mpp_rkvdec2 fdc48100.rkvdec-core: min_width 512
[    1.647777] mpp_rkvdec2 fdc48100.rkvdec-core: probing finish
[    1.647950] mpp_rkvenc2 rkvenc-ccu: probing start
[    1.647956] mpp_rkvenc2 rkvenc-ccu: probing finish
[    1.648067] mpp_rkvenc2 fdbd0000.rkvenc-core: Adding to iommu group 10
[    1.648236] mpp_rkvenc2 fdbd0000.rkvenc-core: probing start
[    1.648252] mpp_rkvenc2 fdbd0000.rkvenc-core: link mode task capacity 8
[    1.648388] mpp_rkvenc2 fdbd0000.rkvenc-core: attach ccu as core 0
[    1.648488] mpp_rkvenc2 fdbd0000.rkvenc-core: probing finish
[    1.648558] mpp_rkvenc2 fdbe0000.rkvenc-core: Adding to iommu group 11
[    1.648773] mpp_rkvenc2 fdbe0000.rkvenc-core: probing start
[    1.648789] mpp_rkvenc2 fdbe0000.rkvenc-core: link mode task capacity 8
[    1.648944] mpp_rkvenc2 fdbe0000.rkvenc-core: attach ccu as core 1
[    1.649030] mpp_rkvenc2 fdbe0000.rkvenc-core: probing finish
[    1.649522] mpp_av1dec: Adding child /av1d@fdc70000
[    1.649741] mpp_av1dec: register device av1d-master
[    1.649760] mpp_av1dec av1d-master: av1_iommu_of_xlate,784
[    1.649779] av1_iommu_probe_device,736, consumer : av1d-master, supplier : fdca0000.iommu
[    1.649786] mpp_av1dec av1d-master: Adding to iommu group 15
[    1.650004] mpp_av1dec av1d-master: probing start
[    1.650205] mpp_av1dec av1d-master: probing finish
[    1.650240] mpp_service mpp-srv: probe success
[    1.657151] rk-pcie fe150000.pcie: missing legacy IRQ resource
[    1.657166] rk-pcie fe150000.pcie: IRQ msi not found
[    1.657171] rk-pcie fe150000.pcie: use outband MSI support
[    1.657176] rk-pcie fe150000.pcie: Missing *config* reg space
[    1.657184] rk-pcie fe150000.pcie: host bridge /pcie@fe150000 ranges:
[    1.657199] rk-pcie fe150000.pcie:      err 0x00f0000000..0x00f00fffff -> 0x00f0000000
[    1.657209] rk-pcie fe150000.pcie:       IO 0x00f0100000..0x00f01fffff -> 0x00f0100000
[    1.657221] rk-pcie fe150000.pcie:      MEM 0x00f0200000..0x00f0ffffff -> 0x00f0200000
[    1.657229] rk-pcie fe150000.pcie:      MEM 0x0900000000..0x093fffffff -> 0x0900000000
[    1.657259] rk-pcie fe150000.pcie: Missing *config* reg space
[    1.657287] rk-pcie fe150000.pcie: invalid resource
[    1.657661] dma-pl330 fea10000.dma-controller: Loaded driver for PL330 DMAC-241330
[    1.657670] dma-pl330 fea10000.dma-controller:     DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[    1.658560] dma-pl330 fea30000.dma-controller: Loaded driver for PL330 DMAC-241330
[    1.658568] dma-pl330 fea30000.dma-controller:     DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[    1.659401] dma-pl330 fed10000.dma-controller: Loaded driver for PL330 DMAC-241330
[    1.659409] dma-pl330 fed10000.dma-controller:     DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[    1.659822] rockchip-pvtm fda40000.pvtm: pvtm@0 probed
[    1.659878] rockchip-pvtm fda50000.pvtm: pvtm@1 probed
[    1.659932] rockchip-pvtm fda60000.pvtm: pvtm@2 probed
[    1.659983] rockchip-pvtm fdaf0000.pvtm: pvtm@3 probed
[    1.660032] rockchip-pvtm fdb30000.pvtm: pvtm@4 probed
[    1.660588] rockchip-system-monitor rockchip-system-monitor: system monitor probe
[    1.661317] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled
[    1.661754] febb0000.serial: ttyS8 at MMIO 0xfebb0000 (irq = 81, base_baud = 1500000) is a 16550A
[    1.662852] random: fast init done
[    1.662955] random: crng init done
[    1.663521] rockchip-vop2 fdd90000.vop: Adding to iommu group 14
[    1.670007] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp0 assign plane mask: 0x5, primary plane phy id: 2
[    1.670018] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp1 assign plane mask: 0xa, primary plane phy id: 3
[    1.670037] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp2 assign plane mask: 0x140, primary plane phy id: 8
[    1.670045] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp3 assign plane mask: 0x280, primary plane phy id: 9
[    1.670052] rockchip-drm display-subsystem: failed to get hdmi0_phy_pll: -2
[    1.670058] rockchip-drm display-subsystem: failed to get hdmi1_phy_pll: -2
[    1.670260] [drm] failed to init overlay plane Cluster0-win1
[    1.670291] [drm] failed to init overlay plane Cluster1-win1
[    1.670322] [drm] failed to init overlay plane Cluster2-win1
[    1.670351] [drm] failed to init overlay plane Cluster3-win1
[    1.680559] rockchip-drm display-subsystem: bound fdd90000.vop (ops 0xffffffc010fb1eb0)
[    1.681133] dwhdmi-rockchip fde80000.hdmi: registered ddc I2C bus driver
[    1.681305] rockchip-drm display-subsystem: bound fde80000.hdmi (ops 0xffffffc010fb9c10)
[    1.681365] rockchip-drm display-subsystem: bound fde50000.dp (ops 0xffffffc010fbbf20)
[    1.681763] rockchip-drm display-subsystem: failed to parse loader memory
[    1.792727] rockchip-drm display-subsystem: [drm] fb0: rockchipdrmfb frame buffer device
[    1.793219] [drm] Initialized rockchip 3.0.0 20140818 for display-subsystem on minor 0
[    1.799785] brd: module loaded
[    1.802765] loop: module loaded
[    1.802936] zram: Added device: zram0
[    1.803069] lkdtm: No crash points registered, enable through debugfs
[    1.803166] system_heap: orders[0] = 6
[    1.803171] system_heap: orders[1] = 4
[    1.803174] system_heap: orders[2] = 0
[    1.804129] ahci fe210000.sata: supply ahci not found, using dummy regulator
[    1.804206] ahci fe210000.sata: supply phy not found, using dummy regulator
[    1.804269] ahci fe210000.sata: supply target not found, using dummy regulator
[    1.804331] ahci fe210000.sata: forcing port_map 0x0 -> 0x1
[    1.804353] ahci fe210000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode
[    1.804361] ahci fe210000.sata: flags: ncq sntf pm led clo only pmp fbs pio slum part ccc apst 
[    1.804370] ahci fe210000.sata: port 0 can do FBS, forcing FBSCP
[    1.804982] scsi host0: ahci
[    1.805118] ata1: SATA max UDMA/133 mmio [mem 0xfe210000-0xfe210fff] port 0x100 irq 70
[    1.806228] rockchip-spi feb20000.spi: no high_speed pinctrl state
[    1.807488] rk806 spi2.0: chip id: RK806,ver:0x2, 0x0
[    1.807653] rk806 spi2.0: ON: 0x40 OFF:0x0
[    1.810586] vdd_gpu_s0: supplied by vcc5v0_sys
[    1.812160] vdd_cpu_lit_s0: supplied by vcc5v0_sys
[    1.813320] vdd_log_s0: supplied by vcc5v0_sys
[    1.814437] vdd_vdenc_s0: supplied by vcc5v0_sys
[    1.815682] vdd_ddr_s0: supplied by vcc5v0_sys
[    1.816490] vdd2_ddr_s3: supplied by vcc5v0_sys
[    1.817610] vdd_2v0_pldo_s3: supplied by vcc5v0_sys
[    1.818704] vcc_3v3_s3: supplied by vcc5v0_sys
[    1.819683] vddq_ddr_s0: supplied by vcc5v0_sys
[    1.820808] vcc_1v8_s3: supplied by vcc5v0_sys
[    1.821995] vdd_0v75_s3: supplied by vcc_1v1_nldo_s3
[    1.823124] vdd_ddr_pll_s0: supplied by vcc_1v1_nldo_s3
[    1.824175] avdd_0v75_s0: supplied by vcc_1v1_nldo_s3
[    1.825228] vdd_0v85_s0: supplied by vcc_1v1_nldo_s3
[    1.826281] vdd_0v75_s0: supplied by vcc_1v1_nldo_s3
[    1.827396] avcc_1v8_s0: supplied by vdd_2v0_pldo_s3
[    1.828675] vcc_1v8_s0: supplied by vdd_2v0_pldo_s3
[    1.829810] avdd_1v2_s0: supplied by vdd_2v0_pldo_s3
[    1.830955] vcc_3v3_s0: supplied by vcc5v0_sys
[    1.832018] vccio_sd_s0: supplied by vcc5v0_sys
[    1.833070] pldo6_s3: supplied by vcc5v0_sys
[    1.834093] rk806 spi2.0: no sleep-setting state
[    1.834120] rk806 spi2.0: no reset-setting pinctrl state
[    1.834132] rk806 spi2.0: no dvs-setting pinctrl state
[    1.837943] libphy: Fixed MDIO Bus: probed
[    1.839784] rk_gmac-dwmac fe1b0000.ethernet: IRQ eth_lpi not found
[    1.840257] rk_gmac-dwmac fe1b0000.ethernet: no regulator found
[    1.840273] rk_gmac-dwmac fe1b0000.ethernet: clock input or output? (output).
[    1.840286] rk_gmac-dwmac fe1b0000.ethernet: TX delay(0x43).
[    1.840299] rk_gmac-dwmac fe1b0000.ethernet: Can not read property: rx_delay.
[    1.840310] rk_gmac-dwmac fe1b0000.ethernet: set rx_delay to 0xffffffff
[    1.840330] rk_gmac-dwmac fe1b0000.ethernet: integrated PHY? (no).
[    1.840346] rk_gmac-dwmac fe1b0000.ethernet: cannot get clock mac_clk_rx
[    1.840361] rk_gmac-dwmac fe1b0000.ethernet: cannot get clock mac_clk_tx
[    1.840398] rk_gmac-dwmac fe1b0000.ethernet: cannot get clock clk_mac_speed
[    1.840640] rk_gmac-dwmac fe1b0000.ethernet: init for RGMII_RXID
[    1.840762] rk_gmac-dwmac fe1b0000.ethernet: User ID: 0x30, Synopsys ID: 0x51
[    1.840769] rk_gmac-dwmac fe1b0000.ethernet:     DWMAC4/5
[    1.840775] rk_gmac-dwmac fe1b0000.ethernet: DMA HW capability register supported
[    1.840781] rk_gmac-dwmac fe1b0000.ethernet: RX Checksum Offload Engine supported
[    1.840785] rk_gmac-dwmac fe1b0000.ethernet: TX Checksum insertion supported
[    1.840790] rk_gmac-dwmac fe1b0000.ethernet: Wake-Up On Lan supported
[    1.840827] rk_gmac-dwmac fe1b0000.ethernet: TSO supported
[    1.840833] rk_gmac-dwmac fe1b0000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    1.840839] rk_gmac-dwmac fe1b0000.ethernet: Enabled Flow TC (entries=2)
[    1.840844] rk_gmac-dwmac fe1b0000.ethernet: TSO feature enabled
[    1.840849] rk_gmac-dwmac fe1b0000.ethernet: Using 32 bits DMA width
[    1.846007] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[    1.862677] rk-pcie fe150000.pcie: PCIe Linking... LTSSM is 0x0
[    1.871563] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[    1.888231] rk-pcie fe150000.pcie: PCIe Linking... LTSSM is 0x1
[    1.898229] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[    1.901563] rk-pcie fe180000.pcie: PCIe Link up, LTSSM is 0x30011
[    1.901637] rk-pcie fe180000.pcie: PCI host bridge to bus 0003:30
[    1.901645] pci_bus 0003:30: root bus resource [bus 30-3f]
[    1.901647] dwhdmi-rockchip fde80000.hdmi: use tmds mode
[    1.901657] pci_bus 0003:30: root bus resource [??? 0xf3000000-0xf30fffff flags 0x0]
[    1.901664] pci_bus 0003:30: root bus resource [io  0x0000-0xfffff] (bus address [0xf3100000-0xf31fffff])
[    1.901669] pci_bus 0003:30: root bus resource [mem 0xf3200000-0xf3ffffff]
[    1.901675] pci_bus 0003:30: root bus resource [mem 0x9c0000000-0x9ffffffff pref]
[    1.901686] rockchip-vop2 fdd90000.vop: [drm:vop2_crtc_atomic_enable] Update mode to 1920x1080p60, type: 11(if:800) for vp0 dclk: 148500000
[    1.901712] pci 0003:30:00.0: [1d87:3588] type 01 class 0x060400
[    1.901730] pci 0003:30:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref]
[    1.901778] pci 0003:30:00.0: supports D1 D2
[    1.901784] pci 0003:30:00.0: PME# supported from D0 D1 D3hot
[    1.901845] rockchip-vop2 fdd90000.vop: [drm:vop2_crtc_atomic_enable] dclk_out0 div: 0 dclk_core0 div: 2
[    1.901859] rockchip-vop2 fdd90000.vop: [drm:vop2_crtc_atomic_enable] set dclk_vop0 to 148500000, get 148500000
[    1.901882] dwhdmi-rockchip fde80000.hdmi: final tmdsclk = 148500000
[    1.901891] rockchip-hdptx-phy-hdmi fed60000.hdmiphy: bus_width:0x16a8c8,bit_rate:1485000
[    1.901900] rockchip-hdptx-phy-hdmi fed60000.hdmiphy: hdptx_ropll_cmn_config bus_width:16a8c8 rate:1485000
[    1.902221] rockchip-hdptx-phy-hdmi fed60000.hdmiphy: hdptx phy pll locked!
[    1.902417] rockchip-hdptx-phy-hdmi fed60000.hdmiphy: hdptx phy lane locked!
[    1.902440] dwhdmi-rockchip fde80000.hdmi: don't use dsc mode
[    1.906107] pci 0003:30:00.0: Primary bus is hard wired to 0
[    1.906115] pci 0003:30:00.0: bridge configuration invalid ([bus 01-ff]), reconfiguring
[    1.906277] pci 0003:31:00.0: [10ec:8168] type 00 class 0x020000
[    1.906342] pci 0003:31:00.0: reg 0x10: initial BAR value 0x00000000 invalid
[    1.906348] pci 0003:31:00.0: reg 0x10: [io  size 0x0100]
[    1.906428] pci 0003:31:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit]
[    1.906481] pci 0003:31:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit]
[    1.906890] pci 0003:31:00.0: supports D1 D2
[    1.906896] pci 0003:31:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    1.914896] rk-pcie fe150000.pcie: PCIe Linking... LTSSM is 0x0
[    1.919060] pci_bus 0003:31: busn_res: [bus 31-3f] end is updated to 31
[    1.919079] pci 0003:30:00.0: BAR 8: assigned [mem 0xf3200000-0xf32fffff]
[    1.919086] pci 0003:30:00.0: BAR 6: assigned [mem 0xf3300000-0xf330ffff pref]
[    1.919092] pci 0003:30:00.0: BAR 7: assigned [io  0x1000-0x1fff]
[    1.919099] pci 0003:31:00.0: BAR 4: assigned [mem 0xf3200000-0xf3203fff 64bit]
[    1.919144] pci 0003:31:00.0: BAR 2: assigned [mem 0xf3204000-0xf3204fff 64bit]
[    1.919187] pci 0003:31:00.0: BAR 0: assigned [io  0x1000-0x10ff]
[    1.919203] pci 0003:30:00.0: PCI bridge to [bus 31]
[    1.919209] pci 0003:30:00.0:   bridge window [io  0x1000-0x1fff]
[    1.919215] pci 0003:30:00.0:   bridge window [mem 0xf3200000-0xf32fffff]
[    1.920538] pcieport 0003:30:00.0: PME: Signaling with IRQ 127
[    1.920664] r8168 Gigabit Ethernet driver 8.049.02-NAPI loaded
[    1.920692] r8168 0003:31:00.0: enabling device (0000 -> 0003)
[    1.924897] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[    1.936892] r8168 0003:31:00.0 (unnamed net_device) (uninitialized): Invalid ether addr 00:00:00:00:00:00
[    1.936903] r8168 0003:31:00.0 (unnamed net_device) (uninitialized): Random ether addr da:fb:cb:e3:e5:ce
[    1.937210] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.
[    1.939261] r8168  Copyright (C) 2021 Realtek NIC software team <nicfae@realtek.com> 
[    1.939261]  This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>. 
[    1.939261]  This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>. 
[    1.941568] rk-pcie fe150000.pcie: PCIe Linking... LTSSM is 0x0
[    1.951563] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[    1.968229] rk-pcie fe150000.pcie: PCIe Linking... LTSSM is 0x0
[    1.971563] libphy: stmmac: probed
[    1.973195] usbcore: registered new interface driver rtl8150
[    1.973222] usbcore: registered new interface driver r8152
[    1.986340] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.986395] ehci-pci: EHCI PCI platform driver
[    1.986467] ehci-platform: EHCI generic platform driver
[    1.989176] ehci-platform fc800000.usb: EHCI Host Controller
[    1.989376] ehci-platform fc800000.usb: new USB bus registered, assigned bus number 1
[    1.989520] ehci-platform fc800000.usb: irq 19, io mem 0xfc800000
[    2.001597] ehci-platform fc800000.usb: USB 2.0 started, EHCI 1.00
[    2.001836] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[    2.001852] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.001864] usb usb1: Product: EHCI Host Controller
[    2.001876] usb usb1: Manufacturer: Linux 5.10.66 ehci_hcd
[    2.001887] usb usb1: SerialNumber: fc800000.usb
[    2.002400] hub 1-0:1.0: USB hub found
[    2.002447] hub 1-0:1.0: 1 port detected
[    2.005422] ehci-platform fc880000.usb: EHCI Host Controller
[    2.005607] ehci-platform fc880000.usb: new USB bus registered, assigned bus number 2
[    2.005719] ehci-platform fc880000.usb: irq 21, io mem 0xfc880000
[    2.018249] ehci-platform fc880000.usb: USB 2.0 started, EHCI 1.00
[    2.018469] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[    2.018485] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.018498] usb usb2: Product: EHCI Host Controller
[    2.018509] usb usb2: Manufacturer: Linux 5.10.66 ehci_hcd
[    2.018520] usb usb2: SerialNumber: fc880000.usb
[    2.018988] hub 2-0:1.0: USB hub found
[    2.019034] hub 2-0:1.0: 1 port detected
[    2.019947] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.019972] ohci-platform: OHCI generic platform driver
[    2.020301] ohci-platform fc840000.usb: Generic Platform OHCI controller
[    2.020481] ohci-platform fc840000.usb: new USB bus registered, assigned bus number 3
[    2.020596] ohci-platform fc840000.usb: irq 20, io mem 0xfc840000
[    2.079103] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
[    2.079127] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.079140] usb usb3: Product: Generic Platform OHCI controller
[    2.079152] usb usb3: Manufacturer: Linux 5.10.66 ohci_hcd
[    2.079163] usb usb3: SerialNumber: fc840000.usb
[    2.079629] hub 3-0:1.0: USB hub found
[    2.079678] hub 3-0:1.0: 1 port detected
[    2.080321] ohci-platform fc8c0000.usb: Generic Platform OHCI controller
[    2.080499] ohci-platform fc8c0000.usb: new USB bus registered, assigned bus number 4
[    2.080606] ohci-platform fc8c0000.usb: irq 22, io mem 0xfc8c0000
[    2.108230] dwhdmi-rockchip fde80000.hdmi: dw hdmi qp use tmds mode
[    2.118048] ata1: SATA link down (SStatus 0 SControl 300)
[    2.139104] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
[    2.139130] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.139143] usb usb4: Product: Generic Platform OHCI controller
[    2.139154] usb usb4: Manufacturer: Linux 5.10.66 ohci_hcd
[    2.139166] usb usb4: SerialNumber: fc8c0000.usb
[    2.139677] hub 4-0:1.0: USB hub found
[    2.139730] hub 4-0:1.0: 1 port detected
[    2.141138] phy phy-fd5d4000.syscon:usb2-phy@4000.3: illegal mode
[    2.141160] xhci-hcd xhci-hcd.7.auto: xHCI Host Controller
[    2.141333] xhci-hcd xhci-hcd.7.auto: new USB bus registered, assigned bus number 5
[    2.141436] xhci-hcd xhci-hcd.7.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
[    2.141462] xhci-hcd xhci-hcd.7.auto: irq 130, io mem 0xfc400000
[    2.141628] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[    2.141635] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.141640] usb usb5: Product: xHCI Host Controller
[    2.141645] usb usb5: Manufacturer: Linux 5.10.66 xhci-hcd
[    2.141650] usb usb5: SerialNumber: xhci-hcd.7.auto
[    2.141886] hub 5-0:1.0: USB hub found
[    2.141902] hub 5-0:1.0: 1 port detected
[    2.142049] xhci-hcd xhci-hcd.7.auto: xHCI Host Controller
[    2.142136] xhci-hcd xhci-hcd.7.auto: new USB bus registered, assigned bus number 6
[    2.142145] xhci-hcd xhci-hcd.7.auto: Host supports USB 3.0 SuperSpeed
[    2.142173] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.142220] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
[    2.142226] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.142231] usb usb6: Product: xHCI Host Controller
[    2.142235] usb usb6: Manufacturer: Linux 5.10.66 xhci-hcd
[    2.142240] usb usb6: SerialNumber: xhci-hcd.7.auto
[    2.142454] hub 6-0:1.0: USB hub found
[    2.142470] hub 6-0:1.0: 1 port detected
[    2.142655] usbcore: registered new interface driver cdc_acm
[    2.142660] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    2.142766] usbcore: registered new interface driver uas
[    2.142819] usbcore: registered new interface driver usb-storage
[    2.142860] usbcore: registered new interface driver usbserial_generic
[    2.142872] usbserial: USB Serial support registered for generic
[    2.142890] usbcore: registered new interface driver cp210x
[    2.142900] usbserial: USB Serial support registered for cp210x
[    2.142933] usbcore: registered new interface driver ftdi_sio
[    2.142944] usbserial: USB Serial support registered for FTDI USB Serial Device
[    2.143028] usbcore: registered new interface driver keyspan
[    2.143038] usbserial: USB Serial support registered for Keyspan - (without firmware)
[    2.143049] usbserial: USB Serial support registered for Keyspan 1 port adapter
[    2.143059] usbserial: USB Serial support registered for Keyspan 2 port adapter
[    2.143071] usbserial: USB Serial support registered for Keyspan 4 port adapter
[    2.143091] usbcore: registered new interface driver option
[    2.143101] usbserial: USB Serial support registered for GSM modem (1-port)
[    2.143234] usbcore: registered new interface driver oti6858
[    2.143245] usbserial: USB Serial support registered for oti6858
[    2.143263] usbcore: registered new interface driver pl2303
[    2.143273] usbserial: USB Serial support registered for pl2303
[    2.143297] usbcore: registered new interface driver qcserial
[    2.143307] usbserial: USB Serial support registered for Qualcomm USB modem
[    2.143338] usbcore: registered new interface driver sierra
[    2.143348] usbserial: USB Serial support registered for Sierra USB modem
[    2.143792] usbcore: registered new interface driver usbtouchscreen
[    2.145107] input: rk805 pwrkey as /devices/platform/feb20000.spi/spi_master/spi2/spi2.0/rk805-pwrkey.5.auto/input/input0
[    2.145762] i2c /dev entries driver
[    2.150433] vdd_cpu_big0_s0: supplied by vcc5v0_sys
[    2.159676] vdd_cpu_big1_s0: supplied by vcc5v0_sys
[    2.173989] rtc-hym8563 2-0051: rtc information is valid
[    2.175567] rtc-hym8563 2-0051: registered as rtc0
[    2.175858] rtc-hym8563 2-0051: setting system clock to 2021-01-01T12:00:21 UTC (1609502421)
[    2.177788] vdd_npu_s0: supplied by vcc5v0_sys
[    2.182722] usbcore: registered new interface driver uvcvideo
[    2.182730] USB Video Class driver (1.1.1)
[    2.183855] rockchip-thermal fec00000.tsadc: Missing rockchip,grf property
[    2.184430] rockchip-thermal fec00000.tsadc: tsadc is probed successfully!
[    2.184784] Bluetooth: HCI UART driver ver 2.3
[    2.184791] Bluetooth: HCI UART protocol H4 registered
[    2.184795] Bluetooth: HCI UART protocol ATH3K registered
[    2.184825] usbcore: registered new interface driver bfusb
[    2.184850] usbcore: registered new interface driver btusb
[    2.185214] cpu cpu0: leakage=14
[    2.186701] cpu cpu0: pvtm=1504
[    2.186799] cpu cpu0: pvtm-volt-sel=4
[    2.187648] cpu cpu4: leakage=10
[    2.194527] cpu cpu4: pvtm=1724
[    2.198758] cpu cpu4: pvtm-volt-sel=5
[    2.200420] cpu cpu6: leakage=11
[    2.207247] cpu cpu6: pvtm=1734
[    2.211390] cpu cpu6: pvtm-volt-sel=5
[    2.214205] cpu cpu0: avs=0
[    2.216099] cpu cpu4: avs=0
[    2.217962] cpu cpu6: avs=0
[    2.218631] cpu cpu0: EM: created perf domain
[    2.218769] cpu cpu0: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=1608000000 h_table=0
[    2.220153] cpu cpu4: EM: created perf domain
[    2.220346] cpu cpu4: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=2208000000 h_table=0
[    2.224275] dwhdmi-rockchip fde80000.hdmi: use tmds mode
[    2.229003] cpu cpu6: EM: created perf domain
[    2.229530] cpu cpu6: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=2208000000 h_table=0
[    2.242624] sdhci: Secure Digital Host Controller Interface driver
[    2.242635] sdhci: Copyright(c) Pierre Ossman
[    2.242640] Synopsys Designware Multimedia Card Interface Driver
[    2.243075] sdhci-pltfm: SDHCI platform and OF driver helper
[    2.244166] arm-scmi firmware:scmi: Failed. SCMI protocol 17 not active.
[    2.244199] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
[    2.244752] cryptodev: driver 1.12 loaded.
[    2.244785] hid: raw HID events driver (C) Jiri Kosina
[    2.244941] usbcore: registered new interface driver usbhid
[    2.244946] usbhid: USB HID core driver
[    2.256243] optee: probing for conduit method.
[    2.256263] optee: revision 3.13 (87d94c5e)
[    2.256754] optee: initialized driver
[    2.257408] usbcore: registered new interface driver snd-usb-audio
[    2.265512] input: rockchip-hdmi0 rockchip-hdmi0 as /devices/platform/hdmi0-sound/sound/card0/input1
[    2.266525] input: headset-keys as /devices/platform/es8388-sound/input/input2
[    2.274141] mmc0: SDHCI controller on fe2e0000.mmc [fe2e0000.mmc] using ADMA
[    2.277302] ES8323 7-0011: ASoC: error at soc_component_write_no_lock on ES8323.7-0011: -5
[    2.309864] mmc0: new HS400 Enhanced strobe MMC card at address 0001
[    2.310589] mmcblk0: mmc0:0001 TX2932 29.1 GiB 
[    2.310806] mmcblk0boot0: mmc0:0001 TX2932 partition 1 4.00 MiB
[    2.311024] mmcblk0boot1: mmc0:0001 TX2932 partition 2 4.00 MiB
[    2.311229] mmcblk0rpmb: mmc0:0001 TX2932 partition 3 4.00 MiB, chardev (236:0)
[    2.314588]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8
[    2.329217] input: rockchip,es8388 Headset as /devices/platform/es8388-sound/sound/card1/input3
[    2.330884] Initializing XFRM netlink socket
[    2.331277] NET: Registered protocol family 10
[    2.332106] Segment Routing with IPv6
[    2.332156] NET: Registered protocol family 17
[    2.332173] NET: Registered protocol family 15
[    2.332421] Bluetooth: RFCOMM socket layer initialized
[    2.332439] Bluetooth: RFCOMM ver 1.11
[    2.332449] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    2.332458] Bluetooth: HIDP socket layer initialized
[    2.332486] [BT_RFKILL]: Enter rfkill_rk_init
[    2.332492] [WLAN_RFKILL]: Enter rfkill_wlan_init
[    2.333130] [WLAN_RFKILL]: Enter rfkill_wlan_probe
[    2.333154] [WLAN_RFKILL]: can't find rockchip,grf property
[    2.333161] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = ap6255
[    2.333167] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
[    2.333172] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
[    2.333220] [WLAN_RFKILL]: wlan_platdata_parse_dt: WIFI,poweren_gpio = 105 flags = 0.
[    2.333243] [WLAN_RFKILL]: wlan_platdata_parse_dt: WIFI,host_wake_irq = 103, flags = 0.
[    2.333252] [WLAN_RFKILL]: wlan_platdata_parse_dt: The ref_wifi_clk not found !
[    2.333258] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
[    2.333265] [WLAN_RFKILL]: rfkill_set_wifi_bt_power: 1
[    2.333272] [WLAN_RFKILL]: Exit rfkill_wlan_probe
[    2.333754] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 100.
[    2.333775] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 102.
[    2.333788] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 97.
[    2.333801] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 96.
[    2.334153] [BT_RFKILL]: Request irq for bt wakeup host
[    2.334213] [BT_RFKILL]: ** disable irq
[    2.334277] [BT_RFKILL]: bt_default device registered.
[    2.334339] Key type dns_resolver registered
[    2.335592] Loading compiled-in X.509 certificates
[    2.336687] pstore: Using crash dump compression: deflate
[    2.337074] rga3_core0 fdb60000.rga: Adding to iommu group 2
[    2.337373] rga: rga3_core0_irq, irq = 32, match scheduler
[    2.337872] rga: rga3_core0 driver loaded successfully ver:3.0.76831
[    2.337909] rga: rga3_core0 probe successfully
[    2.338508] rga3_core1 fdb70000.rga: Adding to iommu group 3
[    2.338754] rga: rga3_core1_irq, irq = 33, match scheduler
[    2.339202] rga: rga3_core1 driver loaded successfully ver:3.0.76831
[    2.339234] rga: rga3_core1 probe successfully
[    2.339815] rga: rga2_irq, irq = 34, match scheduler
[    2.340255] rga: rga2 driver loaded successfully ver:3.2.63318
[    2.340275] rga: rga2 probe successfully
[    2.340881] rga: Module initialized. v1.2.14
[    2.353554] vendor storage:20190527 ret = 0
[    2.373932] vcc_3v3_sd_s0: supplied by vcc_3v3_s3
[    2.374636] mali fb000000.gpu: Kernel DDK version g12p0-01eac0
[    2.375497] mali fb000000.gpu: leakage=20
[    2.376412] pcie20_avdd0v85: supplied by vdd_0v85_s0
[    2.377498] pcie20_avdd1v8: supplied by avcc_1v8_s0
[    2.378717] pcie30_avdd0v75: supplied by avdd_0v75_s0
[    2.379444] pcie30_avdd1v8: supplied by avcc_1v8_s0
[    2.379545] mali fb000000.gpu: pvtm=892
[    2.379626] mali fb000000.gpu: pvtm-volt-sel=4
[    2.380796] mali fb000000.gpu: avs=0
[    2.383142] W : [File] : drivers/gpu/arm/bifrost/platform/rk/mali_kbase_config_rk.c; [Line] : 136; [Func] : kbase_platform_rk_init(); power-off-delay-ms not available.
[    2.384189] vcc3v3_lcd0_n: supplied by vcc_1v8_s0
[    2.385780] input: adc-keys as /devices/platform/adc-keys/input/input4
[    2.386011] mali fb000000.gpu: GPU hardware issue table may need updating:
[    2.386011] r0p0 status 5 is unknown; treating as r0p0 status 0
[    2.386030] mali fb000000.gpu: GPU identified as 0x7 arch 10.8.6 r0p0 status 0
[    2.386140] mali fb000000.gpu: No priority control manager is configured
[    2.386155] mali fb000000.gpu: No memory group manager is configured
[    2.386189] mali fb000000.gpu: Protected memory allocator not available
[    2.388690] mali fb000000.gpu: Couldn't find power_model DT node matching 'arm,mali-simple-power-model'
[    2.388713] mali fb000000.gpu: Error -22, no DT entry: mali-simple-power-model.static-coefficient = 1*[0]
[    2.389001] mali fb000000.gpu: Error -22, no DT entry: mali-simple-power-model.dynamic-coefficient = 1*[0]
[    2.389277] mali fb000000.gpu: Error -22, no DT entry: mali-simple-power-model.ts = 4*[0]
[    2.389555] mali fb000000.gpu: Error -22, no DT entry: mali-simple-power-model.thermal-zone = ''
[    2.393660] mali fb000000.gpu: Using configured power model mali-lodx-power-model, and fallback mali-simple-power-model
[    2.393882] mali fb000000.gpu: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=800000000 h_table=0
[    2.396773] mali fb000000.gpu: Probed as mali0
[    2.398704] RKNPU fdab0000.npu: Adding to iommu group 0
[    2.398878] RKNPU fdab0000.npu: RKNPU: rknpu iommu is enabled, using iommu mode
[    2.399705] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdab0000-0xfdabffff]
[    2.399736] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdac0000-0xfdacffff]
[    2.399757] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdad0000-0xfdadffff]
[    2.400482] [drm] Initialized rknpu 0.7.2 20220428 for fdab0000.npu on minor 1
[    2.402252] RKNPU fdab0000.npu: leakage=11
[    2.405115] RKNPU fdab0000.npu: pvtm=896
[    2.406305] RKNPU fdab0000.npu: pvtm-volt-sel=4
[    2.407085] RKNPU fdab0000.npu: avs=0
[    2.407254] RKNPU fdab0000.npu: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=800000000 h_table=0
[    2.409652] RKNPU fdab0000.npu: failed to find power_model node
[    2.409670] RKNPU fdab0000.npu: RKNPU: failed to initialize power model
[    2.409677] RKNPU fdab0000.npu: RKNPU: failed to get dynamic-coefficient
[    2.410540] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    2.412443] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    2.412998] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    2.413007] cfg80211: failed to load regulatory.db
[    2.413272] rockchip-pm rockchip-suspend: not set pwm-regulator-config
[    2.414014] I : [File] : drivers/gpu/arm/mali400/mali/linux/mali_kernel_linux.c; [Line] : 405; [Func] : mali_module_init(); svn_rev_string_from_arm of this mali_ko is '', rk_ko_ver is '5', built at '18:48:50', on 'Jan  8 2023'.
[    2.414246] Mali: 
[    2.414248] Mali device driver loaded
[    2.414256] ALSA device list:
[    2.414261]   #0: rockchip-hdmi0
[    2.414266]   #1: rockchip,es8388
[    2.414269]   #2: rockchip,hdmiin
[    2.422701] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null)
[    2.422765] VFS: Mounted root (ext4 filesystem) on device 179:6.
[    2.423116] devtmpfs: mounted
[    2.427262] Freeing unused kernel memory: 6272K
[    2.438431] rk-pcie fe170000.pcie: PCIe Link up, LTSSM is 0x30011
[    2.438660] rk-pcie fe170000.pcie: PCI host bridge to bus 0002:20
[    2.438680] pci_bus 0002:20: root bus resource [bus 20-2f]
[    2.438695] pci_bus 0002:20: root bus resource [??? 0xf2000000-0xf20fffff flags 0x0]
[    2.438711] pci_bus 0002:20: root bus resource [io  0x100000-0x1fffff] (bus address [0xf2100000-0xf21fffff])
[    2.438725] pci_bus 0002:20: root bus resource [mem 0xf2200000-0xf2ffffff]
[    2.438738] pci_bus 0002:20: root bus resource [mem 0x980000000-0x9bfffffff pref]
[    2.438784] pci 0002:20:00.0: [1d87:3588] type 01 class 0x060400
[    2.438814] pci 0002:20:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref]
[    2.438886] pci 0002:20:00.0: supports D1 D2
[    2.438899] pci 0002:20:00.0: PME# supported from D0 D1 D3hot
[    2.441989] Run /sbin/init as init process
[    2.449660] pci 0002:20:00.0: Primary bus is hard wired to 0
[    2.449689] pci 0002:20:00.0: bridge configuration invalid ([bus 01-ff]), reconfiguring
[    2.449956] pci 0002:21:00.0: [14e4:449d] type 00 class 0x028000
[    2.450058] pci 0002:21:00.0: reg 0x10: [mem 0x00000000-0x0000ffff 64bit]
[    2.450120] pci 0002:21:00.0: reg 0x18: [mem 0x00000000-0x003fffff 64bit]
[    2.450676] pci 0002:21:00.0: supports D1 D2
[    2.450689] pci 0002:21:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    2.469150] pci_bus 0002:21: busn_res: [bus 21-2f] end is updated to 21
[    2.469210] pci 0002:20:00.0: BAR 8: assigned [mem 0xf2200000-0xf27fffff]
[    2.469230] pci 0002:20:00.0: BAR 6: assigned [mem 0xf2800000-0xf280ffff pref]
[    2.469251] pci 0002:21:00.0: BAR 2: assigned [mem 0xf2400000-0xf27fffff 64bit]
[    2.469305] pci 0002:21:00.0: BAR 0: assigned [mem 0xf2200000-0xf220ffff 64bit]
[    2.469356] pci 0002:20:00.0: PCI bridge to [bus 21]
[    2.469371] pci 0002:20:00.0:   bridge window [mem 0xf2200000-0xf27fffff]
[    2.472161] EXT4-fs (mmcblk0p6): re-mounted. Opts: (null)
[    2.472428] pcieport 0002:20:00.0: PME: Signaling with IRQ 144
mount: mounting PARTLABEL=oem on /oem failed: No such file or directory
mount: mounting PARTLABEL=userdata on /userdata failed: No such file or directory
Starting syslogd: OK
Starting klogd: OK
Running sysctl: OK
/usr/bin/modetest
[    2.574928] usb 4-1: new full-speed USB device number 2 using ohci-platform
[    2.699475] dwhdmi-rockchip fde80000.hdmi: use tmds mode
[    2.790118] usb 4-1: New USB device found, idVendor=222a, idProduct=0001, bcdDevice= 0.00
[    2.790200] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.790231] usb 4-1: Product: ILITEK-TP
[    2.790260] usb 4-1: Manufacturer: ILITEK
[    2.790287] usb 4-1: SerialNumber: V06.00.00.00
[    2.803887] input: ILITEK ILITEK-TP as /devices/platform/fc8c0000.usb/usb4/4-1/4-1:1.0/0003:222A:0001.0001/input/input5
[    2.805392] hid-multitouch 0003:222A:0001.0001: input,hidraw0: USB HID v1.10 Device [ILITEK ILITEK-TP] on usb-fc8c0000.usb-1/input0
[    2.814697] input: ILITEK ILITEK-TP Mouse as /devices/platform/fc8c0000.usb/usb4/4-1/4-1:1.1/0003:222A:0001.0002/input/input6
[    2.816303] hid-generic 0003:222A:0001.0002: input,hiddev96,hidraw1: USB HID v1.10 Mouse [ILITEK ILITEK-TP] on usb-fc8c0000.usb-1/input1
[    2.852980] dwhdmi-rockchip fde80000.hdmi: use tmds mode
[    3.019386] dwhdmi-rockchip fde80000.hdmi: use tmds mode
[    3.183153] dwhdmi-rockchip fde80000.hdmi: use tmds mode
[    3.336876] dwhdmi-rockchip fde80000.hdmi: use tmds mode
[    3.503428] dwhdmi-rockchip fde80000.hdmi: use tmds mode
[    3.671493] dwhdmi-rockchip fde80000.hdmi: use tmds mode
[    3.839606] dwhdmi-rockchip fde80000.hdmi: use tmds mode
[    4.014477] dwhdmi-rockchip fde80000.hdmi: use tmds mode
Populating /dev using udev: [    4.042292] udevd[283]: starting version 3.2.10
[    4.058469] udevd[284]: starting eudev-3.2.10
[    4.139787] r8168 0003:31:00.0 enP3p49s0: renamed from eth0
done
Saving random seed: OK
Will now mount all partitions in /etc/fstab
[    4.565036] rk-pcie fe150000.pcie: PCIe Link Fail
[    4.565057] rk-pcie fe150000.pcie: failed to initialize host
Note: Will skip fsck, remove /.skip_fsck to enable
Handling rootfs: /dev/mmcblk0p6 / ext4 rw,noauto 1
Resizing /dev/mmcblk0p6(ext4)
resize2fs 1.46.4 (18-Aug-2021)
[    4.720997] EXT4-fs (mmcblk0p6): resizing filesystem from 248589 to 3670016 blocks
[    5.027269] EXT4-fs (mmcblk0p6): resized filesystem to 3670016
Filesystem at /dev/mmcblk0p6 is mounted on /tmp/tmp.fUJmLSj7oS; on-line resizing required
old_desc_blocks = 1, new_desc_blocks = 1
The filesystem on /dev/mmcblk0p6 is now 3670016 (4k) blocks long.

tune2fs 1.46.4 (18-Aug-2021)
Handling oem: /dev/mmcblk0p7 /oem ext2 defaults 2
Resizing /dev/mmcblk0p7(ext2)
[    5.418046] EXT4-fs (mmcblk0p7): mounting ext2 file system using the ext4 subsystem
[    5.419956] EXT4-fs (mmcblk0p7): mounted filesystem without journal. Opts: (null)
resize2fs 1.46.4 (18-Aug-2021)
The filesystem is already 131072 (1k) blocks long.  Nothing to do!

tune2fs 1.46.4 (18-Aug-2021)
Mounting /dev/mmcblk0p7(ext2) on /oem 
[    5.448374] EXT4-fs (mmcblk0p7): mounting ext2 file system using the ext4 subsystem
[    5.449822] EXT4-fs (mmcblk0p7): mounted filesystem without journal. Opts: (null)
Handling userdata: /dev/mmcblk0p8 /userdata ext2 defaults 2
Resizing /dev/mmcblk0p8(ext2)
[    5.564244] EXT4-fs (mmcblk0p8): mounting ext2 file system using the ext4 subsystem
[    5.567703] EXT4-fs (mmcblk0p8): warning: mounting unchecked fs, running e2fsck is recommended
[    5.574289] EXT4-fs (mmcblk0p8): mounted filesystem without journal. Opts: (null)
resize2fs 1.46.4 (18-Aug-2021)
The filesystem is already 15503328 (1k) blocks long.  Nothing to do!

tune2fs 1.46.4 (18-Aug-2021)
Mounting /dev/mmcblk0p8(ext2) on /userdata 
[    5.620698] EXT4-fs (mmcblk0p8): mounting ext2 file system using the ext4 subsystem
[    5.623180] EXT4-fs (mmcblk0p8): warning: mounting unchecked fs, running e2fsck is recommended
[    5.629515] EXT4-fs (mmcblk0p8): mounted filesystem without journal. Opts: (null)
Log saved to /tmp/mountall.log
Starting system message bus: done
/etc/init.d/S36load_wifi_modules: line 6: /sys/class/rfkill/rfkill1/state: No such file or directory
wpa_supplicant.conf init
wpa_supplicant.conf init
[    5.808089] bcmdhd: Unknown symbol dhd_wlan_mem_prealloc (err -2)
[    5.856587] bcmdhd: Unknown symbol dhd_wlan_mem_prealloc (err -2)
insmod: can't insert '/system/lib/modules/bcmdhd.ko': unknown symbol in module, or unknown parameter
Starting bluetoothd: OK
Starting network: OK
Starting dhcpcd...
dhcpcd-9.4.1 starting
dev: loaded udev
forked to background, child pid 752
[    6.121176] enP3p49s0: 0xffffffc0127ed000, da:fb:cb:e3:e5:ce, IRQ 128
Starting ntpd: OK
starting weston... done.
[    6.205070] rk_gmac-dwmac fe1b0000.ethernet eth1: PHY [stmmac-0:01] driver [RTL8211F Gigabit Ethernet] (irq=POLL)
[    6.207956] dwmac4: Master AXI performs any burst length
[    6.207991] rk_gmac-dwmac fe1b0000.ethernet eth1: No Safety Features support found
[    6.208005] rk_gmac-dwmac fe1b0000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
[    6.208180] rk_gmac-dwmac fe1b0000.ethernet eth1: registered PTP clock
[    6.208485] rk_gmac-dwmac fe1b0000.ethernet eth1: configuring for phy/rgmii-rxid link mode
Starting dropbear sshd: OK
Starting pulseaudio: OK
Debug: configfs_init
W: [pulseaudio] main.c: This program is not intended to be run as root (unless --system is specified).
mkdir: cannot create directory '/sys/kernel/config/usb_gadget/rockchip/functions/uac1.gs0': No such file or directory
mkdir: cannot create directory '/sys/kernel/config/usb_gadget/rockchip/functions/uac2.gs0': No such file or directory
[    6.324980] file system registered
mkdir: cannot create directory '/sys/kernel/config/usb_gadget/rockchip/functions/mtp.gs0': No such file or directory
mkdir: cannot create directory '/sys/kernel/config/usb_gadget/rockchip/functions/rndis.gs0': No such file or directory
[    6.349900] Mass Storage Function, version: 2009/09/11
[    6.349988] LUN: removable file: (no medium)
mkdir: cannot create directory '/sys/kernel/config/usb_gadget/rockchip/functions/hid.usb0': No such file or directory
[    6.400548] read descriptors
[    6.400598] read strings
Date: 2021-01-01 UTC
[12:00:25.743] weston 10.0.0
               https://wayland.freedesktop.org
               Bug reports to: https://gitlab.freedesktop.org/wayland/weston/issues/
               Build: 10.0.0
[12:00:25.744] Command line: /usr/bin/weston
[12:00:25.744] OS: Linux, 5.10.66, #1 SMP Sun Jan 8 18:46:14 CST 2023, aarch64
[12:00:25.745] Flight recorder: enabled
[12:00:25.745] warning: XDG_RUNTIME_DIR "/var/run" is not configured
correctly.  Unix access mode must be 0700 (current mode is 0755),
and must be owned by the user UID 0 (current owner is UID 0).
Refer to your distribution on how to get it, or
http://www.freedesktop.org/wiki/Specifications/basedir-spec
on how to implement it.
[12:00:25.748] Using config file '/etc/xdg/weston/weston.ini'
[12:00:25.749] Output repaint window is -1 ms maximum.
[12:00:25.750] Loading module '/usr/lib/libweston-10/drm-backend.so'
[12:00:25.754] initializing drm backend
[12:00:25.754] Entering mirror mode.
[12:00:25.754] Trying weston_launch launcher...
[12:00:25.754] could not get launcher fd from env
[12:00:25.755] Trying direct launcher...
[12:00:25.757] using /dev/dri/card0
[12:00:25.757] DRM: does not support atomic modesetting
[12:00:25.757] DRM: does not support GBM modifiers
[12:00:25.757] DRM: supports picture aspect ratio
[12:00:25.759] Loading module '/usr/lib/libweston-10/gl-renderer.so'
[12:00:25.762] EGL client extensions: EGL_EXT_client_extensions
               EGL_EXT_platform_base EGL_KHR_client_get_all_proc_addresses
               EGL_KHR_platform_gbm EGL_KHR_platform_wayland
               EGL_EXT_platform_wayland
arm_release_ver of this libmali is 'g6p0-01eac0', rk_so_ver is '6'.
[    6.458438] mali fb000000.gpu: Loading Mali firmware 0x1010000
[    6.459106] mali fb000000.gpu: Protected memory allocator not found, Firmware protected mode entry will not be supported
[    6.459122] mali fb000000.gpu: Protected memory allocator not found, Firmware protected mode entry will not be supported
[    6.459132] mali fb000000.gpu: Protected memory allocator not found, Firmware protected mode entry will not be supported
[12:00:25.797] EGL version: 1.4 Valhall-"g6p0-01eac0"
[12:00:25.797] EGL vendor: ARM
[12:00:25.797] EGL client APIs: OpenGL_ES
[12:00:25.797] EGL extensions: EGL_WL_bind_wayland_display
               EGL_NV_context_priority_realtime EGL_KHR_partial_update
               EGL_KHR_config_attribs EGL_KHR_image EGL_KHR_image_base
               EGL_KHR_fence_sync EGL_KHR_wait_sync EGL_KHR_gl_colorspace
               EGL_KHR_get_all_proc_addresses EGL_IMG_context_priority
               EGL_KHR_no_config_context EGL_EXT_image_dma_buf_import
               EGL_EXT_image_dma_buf_import_modifiers EGL_EXT_yuv_surface
               EGL_EXT_pixel_format_float EGL_ARM_pixmap_multisample_discard
               EGL_KHR_gl_texture_2D_image EGL_KHR_gl_renderbuffer_image
               EGL_KHR_create_context EGL_KHR_surfaceless_context
               EGL_KHR_gl_texture_cubemap_image EGL_EXT_image_gl_colorspace
               EGL_EXT_create_context_robustness
[12:00:25.804] warning: Disabling render GPU timeline and explicit synchronization due to missing EGL_ANDROID_native_fence_sync extension
[12:00:25.805] EGL_KHR_surfaceless_context available
[12:00:25.830] GL version: OpenGL ES 3.2 v1.g6p0-01eac0.ba52c908d926792b8f5fe28f383a2b03
[12:00:25.831] GLSL version: OpenGL ES GLSL ES 3.20
[12:00:25.831] GL vendor: ARM
[12:00:25.831] GL renderer: Mali-LODX
[12:00:25.832] GL extensions: GL_ARM_rgba8 GL_ARM_mali_shader_binary
               GL_OES_depth24 GL_OES_depth_texture
               GL_OES_depth_texture_cube_map GL_OES_packed_depth_stencil
               GL_OES_rgb8_rgba8 GL_EXT_read_format_bgra
               GL_OES_compressed_paletted_texture
               GL_OES_compressed_ETC1_RGB8_texture GL_OES_standard_derivatives
               GL_OES_EGL_image GL_OES_EGL_image_external
               GL_OES_EGL_image_external_essl3 GL_OES_EGL_sync
               GL_OES_texture_npot GL_OES_vertex_half_float
               GL_OES_required_internalformat GL_OES_vertex_array_object
               GL_OES_mapbuffer GL_EXT_texture_format_BGRA8888
               GL_EXT_texture_rg GL_EXT_texture_type_2_10_10_10_REV
               GL_OES_fbo_render_mipmap GL_OES_element_index_uint
               GL_EXT_shadow_samplers GL_OES_texture_compression_astc
               GL_KHR_texture_compression_astc_ldr
               GL_KHR_texture_compression_astc_hdr
               GL_KHR_texture_compression_astc_sliced_3d
               GL_EXT_texture_compression_astc_decode_mode
               GL_EXT_texture_compression_astc_decode_mode_rgb9e5 GL_KHR_debug
               GL_EXT_occlusion_query_boolean GL_EXT_disjoint_timer_query
               GL_EXT_blend_minmax GL_EXT_discard_framebuffer
               GL_OES_get_program_binary GL_OES_texture_3D
               GL_EXT_texture_storage GL_EXT_multisampled_render_to_texture
               GL_EXT_multisampled_render_to_texture2
               GL_OES_surfaceless_context GL_OES_texture_stencil8
               GL_EXT_shader_pixel_local_storage
               GL_ARM_shader_framebuffer_fetch
               GL_ARM_shader_framebuffer_fetch_depth_stencil
               GL_ARM_mali_program_binary GL_EXT_sRGB
               GL_EXT_sRGB_write_control GL_EXT_texture_sRGB_decode
               GL_EXT_texture_sRGB_R8 GL_EXT_texture_sRGB_RG8
               GL_KHR_blend_equation_advanced
               GL_KHR_blend_equation_advanced_coherent
               GL_OES_texture_storage_multisample_2d_array
               GL_OES_shader_image_atomic GL_EXT_robustness
               GL_EXT_draw_buffers_indexed GL_OES_draw_buffers_indexed
               GL_EXT_texture_border_clamp GL_OES_texture_border_clamp
               GL_EXT_texture_cube_map_array GL_OES_texture_cube_map_array
               GL_OES_sample_variables GL_OES_sample_shading
               GL_OES_shader_multisample_interpolation GL_EXT_shader_io_blocks
               GL_OES_shader_io_blocks GL_EXT_tessellation_shader
               GL_OES_tessellation_shader GL_EXT_primitive_bounding_box
               GL_OES_primitive_bounding_box GL_EXT_geometry_shader
               GL_OES_geometry_shader GL_ANDROID_extension_pack_es31a
               GL_EXT_gpu_shader5 GL_OES_gpu_shader5 GL_EXT_texture_buffer
               GL_OES_texture_buffer GL_EXT_copy_image GL_OES_copy_image
               GL_EXT_shader_non_constant_global_initializers
               GL_EXT_color_buffer_half_float GL_EXT_unpack_subimage
               GL_EXT_color_buffer_float GL_EXT_float_blend GL_EXT_YUV_target
               GL_OVR_multiview GL_OVR_multiview2
               GL_OVR_multiview_multisampled_render_to_texture
               GL_KHR_robustness GL_KHR_robust_buffer_access_behavior
               GL_EXT_draw_elements_base_vertex
               GL_OES_draw_elements_base_vertex GL_EXT_buffer_storage
               GL_EXT_texture_filter_anisotropic GL_OES_texture_float_linear
               GL_ARM_texture_unnormalized_coordinates
               GL_EXT_shader_framebuffer_fetch
W: [pulseaudio] authkey.c: Failed to open cookie file '//.config/pulse/cookie': No such file or directory
W: [pulseaudio] authkey.c: Failed to load authentication key '//.config/pulse/cookie': No such file or directory
W: [pulseaudio] authkey.c: Failed to open cookie file '//.pulse-cookie': No such file or directory
W: [pulseaudio] authkey.c: Failed to load authentication key '//.pulse-cookie': No such file or directory
[12:00:26.023] GL ES 3.2 - renderer features:
               read-back format: BGRA
               wl_shm sub-image to texture: yes
               EGL Wayland extension: yes
[12:00:26.024] couldn't fstat launcher tty: Bad file descriptor
E: [pulseaudio] module-rescue-streams.c: module-rescue-stream is obsolete and should no longer be loaded. Please remove it from your configuration.
W: [pulseaudio] server-lookup.c: Unable to contact D-Bus: org.freedesktop.DBus.Error.NotSupported: Using X11 for dbus-daemon autolaunch was disabled at compile time, set your DBUS_SESSION_BUS_ADDRESS instead
W: [pulseaudio] main.c: Unable to contact D-Bus: org.freedesktop.DBus.Error.NotSupported: Using X11 for dbus-daemon autolaunch was disabled at compile time, set your DBUS_SESSION_BUS_ADDRESS instead
[12:00:26.042] event4  - adc-keys: is tagged by udev as: Keyboard
[12:00:26.042] event4  - adc-keys: device is a keyboard
[12:00:26.044] event2  - headset-keys: is tagged by udev as: Keyboard
[12:00:26.044] event2  - headset-keys: device is a keyboard
[12:00:26.045] event3  - rockchip,es8388 Headset: is tagged by udev as: Switch
[12:00:26.089] event3  - not using input device '/dev/input/event3'
[12:00:26.148] event5  - ILITEK ILITEK-TP: is tagged by udev as: Touchscreen
[12:00:26.148] event5  - ILITEK ILITEK-TP: device is a touch device
[12:00:26.211] event6  - ILITEK ILITEK-TP Mouse: is tagged by udev as: Mouse
[12:00:26.212] event6  - ILITEK ILITEK-TP Mouse: device is a pointer
[12:00:26.217] event0  - rk805 pwrkey: is tagged by udev as: Keyboard
[12:00:26.218] event0  - rk805 pwrkey: device is a keyboard
[12:00:26.221] event1  - rockchip-hdmi0 rockchip-hdmi0: is tagged by udev as: Switch
[12:00:26.289] event1  - not using input device '/dev/input/event1'
[12:00:26.387] libinput: configuring device "adc-keys".
[12:00:26.387] libinput: configuring device "headset-keys".
[12:00:26.388] Touchscreen - ILITEK ILITEK-TP - /sys/devices/platform/fc8c0000.usb/usb4/4-1/4-1:1.0/0003:222A:0001.0001/input/input5/event5
[12:00:26.389] libinput: configuring device "ILITEK ILITEK-TP".
[12:00:26.389] input device event5 has no enabled output associated (none named), skipping calibration for now.
[12:00:26.390] libinput: configuring device "ILITEK ILITEK-TP Mouse".
[12:00:26.391] input device event6 has no enabled output associated (none named), skipping calibration for now.
[12:00:26.392] libinput: configuring device "rk805 pwrkey".
[12:00:26.526] DRM: head 'HDMI-A-1' updated, connector 185 is connected, EDID make 'TXD', model 'HDMI', serial '16843009'
[12:00:26.527] DRM: head 'HDMI-A-1' found, connector 185 is connected, EDID make 'TXD', model 'HDMI', serial '16843009'
[12:00:26.528] DRM: head 'DP-1' updated, connector 195 is disconnected.
[12:00:26.529] DRM: head 'DP-1' found, connector 195 is disconnected.
[12:00:26.529] Registered plugin API 'weston_drm_output_api_v1' of size 24
[12:00:26.530] Color manager: no-op
[12:00:26.530] Output 'HDMI-A-1' using color profile: built-in default sRGB SDR profile
[12:00:26.531] Chosen EGL config details: id:   9 rgba: 8 8 8 0 buf: 24 dep:  0 stcl: 0 int: 0-1 type: win|pbf|swap_preserved vis_id: XRGB8888 (0x34325258)
[12:00:26.532] Output HDMI-A-1 (crtc 68) video modes:
               1920x1080@60.0, preferred, current, 148.5 MHz
               1920x1080i@60.0, 74.2 MHz
               1280x1024@60.0, 108.0 MHz
               1280x960@60.0, 108.0 MHz
               1280x720@60.0, 74.2 MHz
               1280x720@60.0 64:27, 74.2 MHz
               1280x720@60.0 16:9, 74.2 MHz
               720x480@59.9, 27.0 MHz
               720x480@59.9 16:9, 27.0 MHz
               720x480@59.9 4:3, 27.0 MHz
[12:00:26.536] associating input device event4 with output HDMI-A-1 (none by udev)
[12:00:26.537] associating input device event2 with output HDMI-A-1 (none by udev)
[12:00:26.537] associating input device event5 with output HDMI-A-1 (none by udev)
[12:00:26.539] associating input device event6 with output HDMI-A-1 (none by udev)
[12:00:26.540] associating input device event0 with output HDMI-A-1 (none by udev)
[12:00:26.541] Output 'HDMI-A-1' enabled with head(s) HDMI-A-1
[12:00:26.541] Compositor capabilities:
               arbitrary surface rotation: yes
               screen capture uses y-flip: yes
               cursor planes: yes
               arbitrary resolutions: no
               view mask clipping: yes
               explicit sync: no
               color operations: yes
               presentation clock: CLOCK_MONOTONIC, id 1
               presentation clock resolution: 0.000000001 s
[12:00:26.546] Loading module '/usr/lib/weston/desktop-shell.so'
[12:00:26.551] launching '/usr/libexec/weston-keyboard'
[12:00:26.556] Note: support for the deprecated wl_shell interface is disabled. If a legacy client still needs it, it can be re-enabled by passing -Ddeprecated-wl-shell=true to Meson when building Weston.
[12:00:26.558] launching '/usr/libexec/weston-desktop-shell'
[    7.280195] dwhdmi-rockchip fde80000.hdmi: use tmds mode
[    7.285717] dwhdmi-rockchip fde80000.hdmi: use tmds mode
could not load cursor 'dnd-move'
could not load cursor 'dnd-move'
could not load cursor 'dnd-copy'
could not load cursor 'dnd-copy'
could not load cursor 'dnd-none'
could not load cursor 'dnd-none'
Starting dnsmasq: [    7.416661] dwc3 fc000000.usb: device reset
OK
xkbcommon: ERROR: couldn't find a Compose file for locale "C" (mapped to "C")
could not create XKB compose table for locale 'C'.  Disabiling compose
Starting input-event-daemon: input-event-daemon: Start parsing /etc/input-event-daemon.conf...
input-event-daemon: Adding device: /dev/input/event0...
input-event-daemon: Adding device: /dev/input/event1...
input-event-daemon: Adding device: /dev/input/event2...
input-event-daemon: Adding device: /dev/input/event3...
input-event-daemon: Adding device: /dev/input/event4...
input-event-daemon: Adding device: /dev/input/event5...
input-event-daemon: Adding device: /dev/input/event6...
input-event-daemon: Start listening on 7 devices...
done
root@RK3588:/# xkbcommon: ERROR: couldn't find a Compose file for locale "C" (mapped to "C")
could not create XKB compose table for locale 'C'.  Disabiling compose
[   10.363770] android_work: sent uevent USB_STATE=CONNECTED
[   10.448621] android_work: sent uevent USB_STATE=CONFIGURED

root@RK3588:/# 
root@RK3588:/# 
root@RK3588:/# 
root@RK3588:/# 
root@RK3588:/# 
root@RK3588:/# 
root@RK3588:/# 
root@RK3588:/# 
root@RK3588:/# 
root@RK3588:/# 
root@RK3588:/# 
root@RK3588:/# 
root@RK3588:/# 
root@RK3588:/# 
root@RK3588:/# 
root@RK3588:/# could not load cursor 'dnd-move'
could not load cursor 'dnd-copy'
could not load cursor 'dnd-none'
xkbcommon: ERROR: couldn't find a Compose file for locale "C" (mapped to "C")
could not create XKB compose table for locale 'C'.  Disabiling compose

root@RK3588:/# 
root@RK3588:/# 
root@RK3588:/# 
root@RK3588:/# 
root@RK3588:/# 
root@RK3588:/# 
root@RK3588:/# 
root@RK3588:/# 
root@RK3588:/# 
root@RK3588:/# 
root@RK3588:/# 
root@RK3588:/# 
root@RK3588:/# [   33.218631] vbus5v0_typec: disabling
[   33.218671] vcc3v3_pcie30: disabling
[   33.218685] vcc_mipicsi0: disabling
[   33.218696] vcc_mipicsi1: disabling
[   33.218706] vcc_mipicsi1: disabling
[   33.219439] vcc_3v3_sd_s0: disabling
[   33.219473] vcc3v3_lcd0_n: disabling
could not load cursor 'dnd-move'
could not load cursor 'dnd-copy'
could not load cursor 'dnd-none'
xkbcommon: ERROR: couldn't find a Compose file for locale "C" (mapped to "C")
could not create XKB compose table for locale 'C'.  Disabiling compose
could not load cursor 'dnd-move'
could not load cursor 'dnd-copy'
could not load cursor 'dnd-none'
xkbcommon: ERROR: couldn't find a Compose file for locale "C" (mapped to "C")
could not create XKB compose table for locale 'C'.  Disabiling compose
could not load cursor 'dnd-move'
could not load cursor 'dnd-copy'
could not load cursor 'dnd-none'
xkbcommon: ERROR: couldn't find a Compose file for locale "C" (mapped to "C")
could not create XKB compose table for locale 'C'.  Disabiling compose
could not load cursor 'dnd-move'
could not load cursor 'dnd-copy'
could not load cursor 'dnd-none'
xkbcommon: ERROR: couldn't find a Compose file for locale "C" (mapped to "C")
could not create XKB compose table for locale 'C'.  Disabiling compose
could not load cursor 'dnd-move'
could not load cursor 'dnd-copy'
could not load cursor 'dnd-none'
xkbcommon: ERROR: couldn't find a Compose file for locale "C" (mapped to "C")
could not create XKB compose table for locale 'C'.  Disabiling compose
could not load cursor 'dnd-move'
could not load cursor 'dnd-copy'
could not load cursor 'dnd-none'
xkbcommon: ERROR: couldn't find a Compose file for locale "C" (mapped to "C")
could not create XKB compose table for locale 'C'.  Disabiling compose
could not load cursor 'dnd-move'
could not load cursor 'dnd-copy'
could not load cursor 'dnd-none'
xkbcommon: ERROR: couldn't find a Compose file for locale "C" (mapped to "C")
could not create XKB compose table for locale 'C'.  Disabiling compose
could not load cursor 'dnd-move'
could not load cursor 'dnd-copy'
could not load cursor 'dnd-none'
xkbcommon: ERROR: couldn't find a Compose file for locale "C" (mapped to "C")
could not create XKB compose table for locale 'C'.  Disabiling compose
could not load cursor 'dnd-move'
could not load cursor 'dnd-copy'
could not load cursor 'dnd-none'
xkbcommon: ERROR: couldn't find a Compose file for locale "C" (mapped to "C")
could not create XKB compose table for locale 'C'.  Disabiling compose
could not load cursor 'dnd-move'
could not load cursor 'dnd-copy'
could not load cursor 'dnd-none'
xkbcommon: ERROR: couldn't find a Compose file for locale "C" (mapped to "C")
could not create XKB compose table for locale 'C'.  Disabiling compose
could not load cursor 'dnd-move'
could not load cursor 'dnd-copy'
could not load cursor 'dnd-none'
xkbcommon: ERROR: couldn't find a Compose file for locale "C" (mapped to "C")
could not create XKB compose table for locale 'C'.  Disabiling compose
could not load cursor 'dnd-move'
could not load cursor 'dnd-copy'
could not load cursor 'dnd-none'
xkbcommon: ERROR: couldn't find a Compose file for locale "C" (mapped to "C")
could not create XKB compose table for locale 'C'.  Disabiling compose
could not load cursor 'dnd-move'
could not load cursor 'dnd-copy'
could not load cursor 'dnd-none'
xkbcommon: ERROR: couldn't find a Compose file for locale "C" (mapped to "C")
could not create XKB compose table for locale 'C'.  Disabiling compose
could not load cursor 'dnd-move'
could not load cursor 'dnd-copy'
could not load cursor 'dnd-none'
xkbcommon: ERROR: couldn't find a Compose file for locale "C" (mapped to "C")
could not create XKB compose table for locale 'C'.  Disabiling compose
could not load cursor 'dnd-move'
could not load cursor 'dnd-copy'
could not load cursor 'dnd-none'
xkbcommon: ERROR: couldn't find a Compose file for locale "C" (mapped to "C")
could not create XKB compose table for locale 'C'.  Disabiling compose
could not load cursor 'dnd-move'
could not load cursor 'dnd-copy'
could not load cursor 'dnd-none'
xkbcommon: ERROR: couldn't find a Compose file for locale "C" (mapped to "C")
could not create XKB compose table for locale 'C'.  Disabiling compose
could not load cursor 'dnd-move'
could not load cursor 'dnd-copy'
could not load cursor 'dnd-none'
xkbcommon: ERROR: couldn't find a Compose file for locale "C" (mapped to "C")
could not create XKB compose table for locale 'C'.  Disabiling compose
could not load cursor 'dnd-move'
could not load cursor 'dnd-copy'
could not load cursor 'dnd-none'
xkbcommon: ERROR: couldn't find a Compose file for locale "C" (mapped to "C")
could not create XKB compose table for locale 'C'.  Disabiling compose

root@RK3588:/# 
root@RK3588:/# 
root@RK3588:/# 
root@RK3588:/# 
root@RK3588:/# 
root@RK3588:/# 
root@RK3588:/# 
root@RK3588:/# 
root@RK3588:/# 
root@RK3588:/# 
root@RK3588:/# lsmod
Module                  Size  Used by    Not tainted
root@RK3588:/# 
root@RK3588:/# 
root@RK3588:/# 
root@RK3588:/# pwd
/
root@RK3588:/# 
root@RK3588:/# 
root@RK3588:/# find . -name *.ko
./system/lib/modules/bcmdhd.ko
root@RK3588:/# 
root@RK3588:/# 
root@RK3588:/# 
root@RK3588:/# 
root@RK3588:/# find . -name hcitool
./usr/bin/hcitool
root@RK3588:/# 
root@RK3588:/# 
root@RK3588:/# hcito
hcitool  hcitop   
root@RK3588:/# hcitool scan
Device is not available: No such device
root@RK3588:/# 
root@RK3588:/# cd /dev
root@RK3588:/dev# 
root@RK3588:/dev# ls -l
total 8
drwxr-xr-x 3 root root         480 Jan  1 12:00 block
drwxr-xr-x 3 root root          60 Jan  1  1970 bus
crw-rw---- 1 root video   248,   0 Jan  1 12:00 cec0
drwxr-xr-x 2 root root        3280 Jan  1 12:00 char
crw------- 1 root root      5,   1 Jan  1 12:00 console
crw------- 1 root root     10, 125 Jan  1 12:00 cpu_dma_latency
crw-rw-rw- 1 root root     10, 126 Jan  1 12:00 crypto
drwxr-xr-x 8 root root         160 Jan  1 12:00 disk
drwxr-xr-x 2 root root         160 Jan  1  1970 dma_heap
drwxr-xr-x 3 root root         140 Jan  1 12:00 dri
crw------- 1 root root    240,   0 Jan  1 12:00 drm_dp_aux0
crw-rw---- 1 root video    29,   0 Jan  1 12:00 fb0
lrwxrwxrwx 1 root root          13 Jan  1 12:00 fd -> /proc/self/fd
crw-rw-rw- 1 root root      1,   7 Jan  1 12:00 full
crw-rw-rw- 1 root root     10, 229 Jan  1 12:00 fuse
crw------- 1 root root    254,   0 Jan  1 12:00 gpiochip0
crw------- 1 root root    254,   1 Jan  1 12:00 gpiochip1
crw------- 1 root root    254,   2 Jan  1 12:00 gpiochip2
crw------- 1 root root    254,   3 Jan  1 12:00 gpiochip3
crw------- 1 root root    254,   4 Jan  1 12:00 gpiochip4
crw------- 1 root root    254,   5 Jan  1 12:00 gpiochip5
crw------- 1 root root    235,   0 Jan  1 12:00 hidraw0
crw------- 1 root root    235,   1 Jan  1 12:00 hidraw1
crw------- 1 root root     10, 183 Jan  1 12:00 hwrng
crw------- 1 root root     89,   0 Jan  1 12:00 i2c-0
crw------- 1 root root     89,  10 Jan  1 12:00 i2c-10
crw------- 1 root root     89,   2 Jan  1 12:00 i2c-2
crw------- 1 root root     89,   7 Jan  1 12:00 i2c-7
crw------- 1 root root     89,   9 Jan  1 12:00 i2c-9
crw------- 1 root root    245,   0 Jan  1 12:00 iio:device0
drwxr-xr-x 4 root root         220 Jan  1 12:00 input
crw-r--r-- 1 root root      1,  11 Jan  1 12:00 kmsg
srw-rw-rw- 1 root root           0 Jan  1 12:00 log
crw-rw---- 1 root disk     10, 237 Jan  1 12:00 loop-control
brw-rw---- 1 root disk      7,   0 Jan  1 12:00 loop0
brw-rw---- 1 root disk      7,   1 Jan  1 12:00 loop1
brw-rw---- 1 root disk      7,   2 Jan  1 12:00 loop2
brw-rw---- 1 root disk      7,   3 Jan  1 12:00 loop3
brw-rw---- 1 root disk      7,   4 Jan  1 12:00 loop4
brw-rw---- 1 root disk      7,   5 Jan  1 12:00 loop5
brw-rw---- 1 root disk      7,   6 Jan  1 12:00 loop6
brw-rw---- 1 root disk      7,   7 Jan  1 12:00 loop7
crw-rw-rw- 1 root root     10, 122 Jan  1 12:00 mali0
crw-r----- 1 root kmem      1,   1 Jan  1 12:00 mem
brw-rw---- 1 root disk    179,   0 Jan  1 12:00 mmcblk0
brw-rw---- 1 root disk    179,  32 Jan  1 12:00 mmcblk0boot0
brw-rw---- 1 root disk    179,  64 Jan  1 12:00 mmcblk0boot1
brw-rw---- 1 root disk    179,   1 Jan  1 12:00 mmcblk0p1
brw-rw---- 1 root disk    179,   2 Jan  1 12:00 mmcblk0p2
brw-rw---- 1 root disk    179,   3 Jan  1 12:00 mmcblk0p3
brw-rw---- 1 root disk    179,   4 Jan  1 12:00 mmcblk0p4
brw-rw---- 1 root disk    179,   5 Jan  1 12:00 mmcblk0p5
brw-rw---- 1 root disk    179,   6 Jan  1 12:00 mmcblk0p6
brw-rw---- 1 root disk    179,   7 Jan  1 12:00 mmcblk0p7
brw-rw---- 1 root disk    179,   8 Jan  1 12:00 mmcblk0p8
crw------- 1 root root    236,   0 Jan  1 12:00 mmcblk0rpmb
crw------- 1 root root    241,   0 Jan  1 12:00 mpp_service
crw-rw-rw- 1 root root      1,   3 Jan  1 12:00 null
crw-r----- 1 root kmem      1,   4 Jan  1 12:00 port
crw-rw-rw- 1 root tty       5,   2 Jan  1 12:00 ptmx
crw------- 1 root root    246,   0 Jan  1 12:00 ptp0
drwxr-xr-x 2 root root           0 Jan  1 12:00 pts
brw-rw---- 1 root disk      1,   0 Jan  1 12:00 ram0
crw-rw-rw- 1 root root      1,   8 Jan  1 12:00 random
crw-rw-r-- 1 root root     10, 242 Jan  1 12:00 rfkill
crw------- 1 root root     10, 124 Jan  1 12:00 rga
lrwxrwxrwx 1 root root           4 Jan  1 12:00 rtc -> rtc0
crw------- 1 root root    250,   0 Jan  1 12:00 rtc0
drwxrwxrwx 2 root root          40 Jan  1 12:00 shm
drwxr-xr-x 3 root root         240 Jan  1 12:00 snd
lrwxrwxrwx 1 root root          15 Jan  1 12:00 stderr -> /proc/self/fd/2
lrwxrwxrwx 1 root root          15 Jan  1 12:00 stdin -> /proc/self/fd/0
lrwxrwxrwx 1 root root          15 Jan  1 12:00 stdout -> /proc/self/fd/1
crw------- 1 root root     10, 127 Jan  1 12:00 sw_sync
crw------- 1 root root    244,   0 Jan  1 12:00 tee0
crw------- 1 root root    244,  16 Jan  1 12:00 teepriv0
crw-rw-rw- 1 root tty       5,   0 Jan  1 12:00 tty
crw--w---- 1 root tty       4,   0 Jan  1 12:00 tty0
crw--w---- 1 root tty       4,   1 Jan  1 12:00 tty1
crw--w---- 1 root tty       4,  10 Jan  1 12:00 tty10
crw--w---- 1 root tty       4,  11 Jan  1 12:00 tty11
crw--w---- 1 root tty       4,  12 Jan  1 12:00 tty12
crw--w---- 1 root tty       4,  13 Jan  1 12:00 tty13
crw--w---- 1 root tty       4,  14 Jan  1 12:00 tty14
crw--w---- 1 root tty       4,  15 Jan  1 12:00 tty15
crw--w---- 1 root tty       4,  16 Jan  1 12:00 tty16
crw--w---- 1 root tty       4,  17 Jan  1 12:00 tty17
crw--w---- 1 root tty       4,  18 Jan  1 12:00 tty18
crw--w---- 1 root tty       4,  19 Jan  1 12:00 tty19
crw--w---- 1 root tty       4,   2 Jan  1 12:00 tty2
crw--w---- 1 root tty       4,  20 Jan  1 12:00 tty20
crw--w---- 1 root tty       4,  21 Jan  1 12:00 tty21
crw--w---- 1 root tty       4,  22 Jan  1 12:00 tty22
crw--w---- 1 root tty       4,  23 Jan  1 12:00 tty23
crw--w---- 1 root tty       4,  24 Jan  1 12:00 tty24
crw--w---- 1 root tty       4,  25 Jan  1 12:00 tty25
crw--w---- 1 root tty       4,  26 Jan  1 12:00 tty26
crw--w---- 1 root tty       4,  27 Jan  1 12:00 tty27
crw--w---- 1 root tty       4,  28 Jan  1 12:00 tty28
crw--w---- 1 root tty       4,  29 Jan  1 12:00 tty29
crw--w---- 1 root tty       4,   3 Jan  1 12:00 tty3
crw--w---- 1 root tty       4,  30 Jan  1 12:00 tty30
crw--w---- 1 root tty       4,  31 Jan  1 12:00 tty31
crw--w---- 1 root tty       4,  32 Jan  1 12:00 tty32
crw--w---- 1 root tty       4,  33 Jan  1 12:00 tty33
crw--w---- 1 root tty       4,  34 Jan  1 12:00 tty34
crw--w---- 1 root tty       4,  35 Jan  1 12:00 tty35
crw--w---- 1 root tty       4,  36 Jan  1 12:00 tty36
crw--w---- 1 root tty       4,  37 Jan  1 12:00 tty37
crw--w---- 1 root tty       4,  38 Jan  1 12:00 tty38
crw--w---- 1 root tty       4,  39 Jan  1 12:00 tty39
crw--w---- 1 root tty       4,   4 Jan  1 12:00 tty4
crw--w---- 1 root tty       4,  40 Jan  1 12:00 tty40
crw--w---- 1 root tty       4,  41 Jan  1 12:00 tty41
crw--w---- 1 root tty       4,  42 Jan  1 12:00 tty42
crw--w---- 1 root tty       4,  43 Jan  1 12:00 tty43
crw--w---- 1 root tty       4,  44 Jan  1 12:00 tty44
crw--w---- 1 root tty       4,  45 Jan  1 12:00 tty45
crw--w---- 1 root tty       4,  46 Jan  1 12:00 tty46
crw--w---- 1 root tty       4,  47 Jan  1 12:00 tty47
crw--w---- 1 root tty       4,  48 Jan  1 12:00 tty48
crw--w---- 1 root tty       4,  49 Jan  1 12:00 tty49
crw--w---- 1 root tty       4,   5 Jan  1 12:00 tty5
crw--w---- 1 root tty       4,  50 Jan  1 12:00 tty50
crw--w---- 1 root tty       4,  51 Jan  1 12:00 tty51
crw--w---- 1 root tty       4,  52 Jan  1 12:00 tty52
crw--w---- 1 root tty       4,  53 Jan  1 12:00 tty53
crw--w---- 1 root tty       4,  54 Jan  1 12:00 tty54
crw--w---- 1 root tty       4,  55 Jan  1 12:00 tty55
crw--w---- 1 root tty       4,  56 Jan  1 12:00 tty56
crw--w---- 1 root tty       4,  57 Jan  1 12:00 tty57
crw--w---- 1 root tty       4,  58 Jan  1 12:00 tty58
crw--w---- 1 root tty       4,  59 Jan  1 12:00 tty59
crw--w---- 1 root tty       4,   6 Jan  1 12:00 tty6
crw--w---- 1 root tty       4,  60 Jan  1 12:00 tty60
crw--w---- 1 root tty       4,  61 Jan  1 12:00 tty61
crw--w---- 1 root tty       4,  62 Jan  1 12:00 tty62
crw--w---- 1 root tty       4,  63 Jan  1 12:00 tty63
crw--w---- 1 root tty       4,   7 Jan  1 12:00 tty7
crw--w---- 1 root tty       4,   8 Jan  1 12:00 tty8
crw--w---- 1 root tty       4,   9 Jan  1 12:00 tty9
crw-rw---- 1 root dialout 253,   0 Jan  1 12:00 ttyFIQ0
crw-rw---- 1 root dialout 237,   0 Jan  1 12:00 ttyGS0
crw-rw---- 1 root dialout   4,  72 Jan  1 12:00 ttyS8
crw------- 1 root root     10, 121 Jan  1 12:00 ubi_ctrl
crw------- 1 root root     10, 239 Jan  1 12:00 uhid
crw------- 1 root root     10, 223 Jan  1 12:00 uinput
crw-rw-rw- 1 root root      1,   9 Jan  1 12:00 urandom
drwxr-xr-x 2 root root          60 Jan  1 12:00 usb
drwxr-xr-x 3 root root          60 Jan  1 12:00 usb-ffs
crw------- 1 root root    238,   0 Jan  1 12:00 usbmon0
crw------- 1 root root    238,   1 Jan  1 12:00 usbmon1
crw------- 1 root root    238,   2 Jan  1 12:00 usbmon2
crw------- 1 root root    238,   3 Jan  1 12:00 usbmon3
crw------- 1 root root    238,   4 Jan  1 12:00 usbmon4
crw------- 1 root root    238,   5 Jan  1 12:00 usbmon5
crw------- 1 root root    238,   6 Jan  1 12:00 usbmon6
crw-rw---- 1 root tty       7,   0 Jan  1 12:00 vcs
crw-rw---- 1 root tty       7,   1 Jan  1 12:00 vcs1
crw-rw---- 1 root tty       7, 128 Jan  1 12:00 vcsa
crw-rw---- 1 root tty       7, 129 Jan  1 12:00 vcsa1
crw-rw---- 1 root tty       7,  64 Jan  1 12:00 vcsu
crw-rw---- 1 root tty       7,  65 Jan  1 12:00 vcsu1
crw------- 1 root root     10, 123 Jan  1 12:00 vendor_storage
crw------- 1 root root     10, 137 Jan  1 12:00 vhci
-rw-r--r-- 1 root root           4 Jan  1 12:00 video-dec0
-rw-r--r-- 1 root root           4 Jan  1 12:00 video-enc0
crw-rw-rw- 1 root root      1,   5 Jan  1 12:00 zero
brw-rw---- 1 root disk    254,   0 Jan  1 12:00 zram0
root@RK3588:/dev# 
root@RK3588:/dev# 
root@RK3588:/dev# 
root@RK3588:/dev# 
root@RK3588:/dev# cd ~
root@RK3588:/# pwd
/
root@RK3588:/# 
root@RK3588:/# 
root@RK3588:/# wpa_supplicant -B -i wlan0 -c /data/cfg/wpa_supplicant.conf
Successfully initialized wpa_supplicant
Could not read interface wlan0 flags: No such device
nl80211: Driver does not support authentication/association or connect commands
nl80211: deinit ifname=wlan0 disabled_11b_rates=0
Could not read interface wlan0 flags: No such device
wlan0: Failed to initialize driver interface
root@RK3588:/# 
root@RK3588:/# 
root@RK3588:/# wpa_cli -i wlan0 -p /var/run/wpa_supplicant scan
Failed to connect to non-global ctrl_ifname: wlan0  error: No such file or directory
root@RK3588:/# 
root@RK3588:/# wpa_cli -i wlan0 -p /var/run/wpa_supplicant scan_results
Failed to connect to non-global ctrl_ifname: wlan0  error: No such file or directory
root@RK3588:/# 
root@RK3588:/# ifconfig
enP3p49s0 Link encap:Ethernet  HWaddr DA:FB:CB:E3:E5:CE  
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
          Interrupt:128 Base address:0xd000 

eth1      Link encap:Ethernet  HWaddr 10:DC:B6:90:AB:30  
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
          Interrupt:107 

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:176 errors:0 dropped:0 overruns:0 frame:0
          TX packets:176 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:11008 (10.7 KiB)  TX bytes:11008 (10.7 KiB)

root@RK3588:/# 
a_cli -i wlan0 -p /var/run/wpa_supplicant scan_resultscant scan && sleep 1 && wpa
Failed to connect to non-global ctrl_ifname: wlan0  error: No such file or directory
root@RK3588:/# 
root@RK3588:/# wl scan && sleep 1 && wl scanresults
wl: wl driver adapter not found
root@RK3588:/# 
root@RK3588:/# wifi_start.sh 13430494987 13430494987702
connect to WiFi ssid: 13430494987, Passwd: 13430494987702
killall: wpa_supplicant: no process killed
Successfully initialized wpa_supplicant
Could not read interface wlan0 flags: No such device
nl80211: Driver does not support authentication/association or connect commands
nl80211: deinit ifname=wlan0 disabled_11b_rates=0
Could not read interface wlan0 flags: No such device
wlan0: Failed to initialize driver interface
root@RK3588:/# 
root@RK3588:/# lsmod
Module                  Size  Used by    Not tainted
root@RK3588:/# 
root@RK3588:/# find . -name *.ko
./system/lib/modules/bcmdhd.ko
root@RK3588:/# 
root@RK3588:/# 
root@RK3588:/# insmod b
bin/              busybox.fragment  
root@RK3588:/# insmod system/lib/modules/bcmdhd.ko 
[  484.719495] bcmdhd: Unknown symbol dhd_wlan_mem_prealloc (err -2)
[  484.747365] bcmdhd: Unknown symbol dhd_wlan_mem_prealloc (err -2)
insmod: can't insert 'system/lib/modules/bcmdhd.ko': unknown symbol in module, or unknown parameter
root@RK3588:/# 
root@RK3588:/# wpa_cli -i wlan0 -p /var/run/wpa_supplicant status
Failed to connect to non-global ctrl_ifname: wlan0  error: No such file or directory
root@RK3588:/# 
root@RK3588:/# wifi_start.sh 18680688682 18680688682702
connect to WiFi ssid: 18680688682, Passwd: 18680688682702
killall: wpa_supplicant: no process killed
Successfully initialized wpa_supplicant
Could not read interface wlan0 flags: No such device
nl80211: Driver does not support authentication/association or connect commands
nl80211: deinit ifname=wlan0 disabled_11b_rates=0
Could not read interface wlan0 flags: No such device
wlan0: Failed to initialize driver interface
root@RK3588:/# 
root@RK3588:/# hcitool scan
Device is not available: No such device
root@RK3588:/# 
root@RK3588:/# hcitool --version
hcitool: unrecognized option '--version'
hcitool - HCI Tool ver 5.62
Usage:
    hcitool [options] <command> [command parameters]
Options:
    --help    Display help
    -i dev    HCI device
Commands:
    dev     Display local devices
    inq     Inquire remote devices
    scan    Scan for remote devices
    name    Get name from remote device
    info    Get information from remote device
    spinq    Start periodic inquiry
    epinq    Exit periodic inquiry
    cmd     Submit arbitrary HCI commands
    con     Display active connections
    cc      Create connection to remote device
    dc      Disconnect from remote device
    sr      Switch central/peripheral role
    cpt     Change connection packet type
    rssi    Display connection RSSI
    lq      Display link quality
    tpl     Display transmit power level
    afh     Display AFH channel map
    lp      Set/display link policy settings
    lst     Set/display link supervision timeout
    auth    Request authentication
    enc     Set connection encryption
    key     Change connection link key
    clkoff    Read clock offset
    clock    Read local or remote clock
    lescan    Start LE scan
    leinfo    Get LE remote information
    lealadd    Add device to LE White List
    lealrm    Remove device from LE White List
    lealsz    Read size of LE White List
    lealclr    Clear LE White List
    lewladd    Deprecated. Use lealadd instead.
    lewlrm    Deprecated. Use lealrm instead.
    lewlsz    Deprecated. Use lealsz instead.
    lewlclr    Deprecated. Use lealclr instead.
    lerladd    Add device to LE Resolving List
    lerlrm    Remove device from LE Resolving List
    lerlclr    Clear LE Resolving List
    lerlsz    Read size of LE Resolving List
    lerlon    Enable LE Address Resolution
    lerloff    Disable LE Address Resolution
    lecc    Create a LE Connection
    ledc    Disconnect a LE Connection
    lecup    LE Connection Update

For more information on the usage of each command use:
    hcitool <command> --help
root@RK3588:/# 
root@RK3588:/# 
root@RK3588:/# mount
/dev/root on / type ext4 (rw,relatime)
devtmpfs on /dev type devtmpfs (rw,relatime,size=3861548k,nr_inodes=965387,mode=755)
proc on /proc type proc (rw,relatime)
devpts on /dev/pts type devpts (rw,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /dev/shm type tmpfs (rw,relatime,mode=777)
tmpfs on /tmp type tmpfs (rw,relatime)
tmpfs on /run type tmpfs (rw,nosuid,nodev,relatime,mode=755)
sysfs on /sys type sysfs (rw,relatime)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
pstore on /sys/fs/pstore type pstore (rw,relatime)
/dev/mmcblk0p7 on /oem type ext2 (rw,relatime)
/dev/mmcblk0p8 on /userdata type ext2 (rw,relatime)
none on /sys/kernel/config type configfs (rw,relatime)
adb on /dev/usb-ffs/adb type functionfs (rw,relatime)
tracefs on /sys/kernel/debug/tracing type tracefs (rw,relatime)
root@RK3588:/# 
root@RK3588:/# 
root@RK3588:/# df -h
Filesystem      Size  Used Avail Use% Mounted on
/dev/root        14G  507M   13G   4% /
devtmpfs        3.7G  8.0K  3.7G   1% /dev
tmpfs           3.8G     0  3.8G   0% /dev/shm
tmpfs           3.8G  196K  3.8G   1% /tmp
tmpfs           3.8G  300K  3.8G   1% /run
/dev/mmcblk0p7  123M   13M  104M  11% /oem
/dev/mmcblk0p8   15G   25K   15G   1% /userdata
root@RK3588:/# 
root@RK3588:/# 
root@RK3588:/# pwd
/
root@RK3588:/# 
root@RK3588:/# lk
sh: lk: command not found
root@RK3588:/# 
root@RK3588:/# ls =l
ls: cannot access '=l': No such file or directory
root@RK3588:/# 
root@RK3588:/# 
root@RK3588:/# ls -l
total 70
drwxr-xr-x   2 root root  4096 Jan  8  2023 bin
-rw-r--r--   1 root root   351 Apr 20  2022 busybox.fragment
lrwxrwxrwx   1 root root     8 Jan  8  2023 data -> userdata
drwxr-xr-x  14 root root  3420 Jan  1 12:00 dev
drwxr-xr-x  21 root root  4096 Jan  1 12:00 etc
drwxr-xr-x   6 root root  4096 Jan  8  2023 lib
lrwxrwxrwx   1 root root     3 Jan  8  2023 lib64 -> lib
lrwxrwxrwx   1 root root    11 Jan  8  2023 linuxrc -> bin/busybox
drwx------   2 root root 16384 Jan  8  2023 lost+found
drwxr-xr-x  14 root root  4096 Jan  8  2023 media
lrwxrwxrwx   1 root root    23 Apr  8  2022 misc -> /dev/block/by-name/misc
drwxr-xr-x   4 root root  4096 Jan  8  2023 mnt
drwxr-xr-x   3 root root  1024 Jan  8  2023 oem
drwxr-xr-x   2 root root  4096 Apr  8  2022 opt
dr-xr-xr-x 278 root root     0 Jan  1 12:00 proc
drwxr-xr-x  16 root root  4096 Jan  8  2023 rockchip-test
drwx------   2 root root  4096 Apr  8  2022 root
drwxr-xr-x   6 root root   340 Jan  1 12:00 run
drwxr-xr-x   2 root root  4096 Jan  8  2023 sbin
lrwxrwxrwx   1 root root    10 Jan  8  2023 sdcard -> mnt/sdcard
dr-xr-xr-x  14 root root     0 Jan  1 12:00 sys
drwxr-xr-x   4 root root  4096 Jan  8  2023 system
drwxrwxrwt  10 root root   360 Jan  1 12:09 tmp
lrwxrwxrwx   1 root root     9 Jan  8  2023 udisk -> mnt/udisk
drwxr-xr-x   6 root root  1024 Jan  1 12:00 userdata
drwxr-xr-x   7 root root  4096 Jan  8  2023 usr
drwxr-xr-x   5 root root  4096 Jan  8  2023 var
lrwxrwxrwx   1 root root     6 Jan  8  2023 vendor -> system
root@RK3588:/# 
root@RK3588:/# [  760.998433] usb 6-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
[  761.017515] usb 6-1: New USB device found, idVendor=0951, idProduct=1666, bcdDevice= 1.10
[  761.017607] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  761.017640] usb 6-1: Product: DataTraveler 3.0
[  761.017669] usb 6-1: Manufacturer: Kingston
[  761.017697] usb 6-1: SerialNumber: B42E99B07ADCE4A01999056C
[  761.021436] usb-storage 6-1:1.0: USB Mass Storage device detected
[  761.022746] scsi host1: usb-storage 6-1:1.0
[  762.046428] scsi 1:0:0:0: Direct-Access     Kingston DataTraveler 3.0 PMAP PQ: 0 ANSI: 6
[  762.049636] sd 1:0:0:0: [sda] 242417664 512-byte logical blocks: (124 GB/116 GiB)
[  762.050276] sd 1:0:0:0: [sda] Write Protect is off
[  762.050722] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[  762.364067]  sda: sda1
[  762.371061] sd 1:0:0:0: [sda] Attached SCSI removable disk
[  762.491887] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[  762.494241] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.

root@RK3588:/# 
root@RK3588:/# ls -l
total 70
drwxr-xr-x   2 root root  4096 Jan  8  2023 bin
-rw-r--r--   1 root root   351 Apr 20  2022 busybox.fragment
lrwxrwxrwx   1 root root     8 Jan  8  2023 data -> userdata
drwxr-xr-x  15 root root  3480 Jan  1 12:13 dev
drwxr-xr-x  21 root root  4096 Jan  1 12:00 etc
drwxr-xr-x   6 root root  4096 Jan  8  2023 lib
lrwxrwxrwx   1 root root     3 Jan  8  2023 lib64 -> lib
lrwxrwxrwx   1 root root    11 Jan  8  2023 linuxrc -> bin/busybox
drwx------   2 root root 16384 Jan  8  2023 lost+found
drwxr-xr-x  14 root root  4096 Jan  8  2023 media
lrwxrwxrwx   1 root root    23 Apr  8  2022 misc -> /dev/block/by-name/misc
drwxr-xr-x   4 root root  4096 Jan  8  2023 mnt
drwxr-xr-x   3 root root  1024 Jan  8  2023 oem
drwxr-xr-x   2 root root  4096 Apr  8  2022 opt
dr-xr-xr-x 282 root root     0 Jan  1 12:00 proc
drwxr-xr-x  16 root root  4096 Jan  8  2023 rockchip-test
drwx------   2 root root  4096 Apr  8  2022 root
drwxr-xr-x   7 root root   360 Jan  1 12:13 run
drwxr-xr-x   2 root root  4096 Jan  8  2023 sbin
lrwxrwxrwx   1 root root    10 Jan  8  2023 sdcard -> mnt/sdcard
dr-xr-xr-x  14 root root     0 Jan  1 12:00 sys
drwxr-xr-x   4 root root  4096 Jan  8  2023 system
drwxrwxrwt  10 root root   360 Jan  1 12:09 tmp
lrwxrwxrwx   1 root root     9 Jan  8  2023 udisk -> mnt/udisk
drwxr-xr-x   6 root root  1024 Jan  1 12:00 userdata
drwxr-xr-x   7 root root  4096 Jan  8  2023 usr
drwxr-xr-x   5 root root  4096 Jan  8  2023 var
lrwxrwxrwx   1 root root     6 Jan  8  2023 vendor -> system
root@RK3588:/# 
root@RK3588:/# cd udisk
root@RK3588:/udisk# 
root@RK3588:/udisk# ls -l
total 0
root@RK3588:/udisk# pwd
/udisk
root@RK3588:/udisk# 
root@RK3588:/udisk# cd /mnt/udisk/
root@RK3588:/mnt/udisk# 
root@RK3588:/mnt/udisk# ls -l
total 0
root@RK3588:/mnt/udisk# cd /sdcard
root@RK3588:/sdcard# ls -l
total 0
root@RK3588:/sdcard# 
root@RK3588:/sdcard# 
root@RK3588:/sdcard# ls-l
sh: ls-l: command not found
root@RK3588:/sdcard# ls -l
total 0
root@RK3588:/sdcard# 
root@RK3588:/sdcard# 
root@RK3588:/sdcard# cd -l
sh: cd: -l: invalid option
cd: usage: cd [-L|[-P [-e]] [-@]] [dir]
root@RK3588:/sdcard# 
root@RK3588:/sdcard# cd ~/
root@RK3588://# 
root@RK3588://# pwd
//
root@RK3588://# 
root@RK3588://# 
root@RK3588://# cd /
root@RK3588:/# pwd
/
root@RK3588:/# 
root@RK3588:/# 
root@RK3588:/# pwd
/
root@RK3588:/# 
root@RK3588:/# df -h
Filesystem      Size  Used Avail Use% Mounted on
/dev/root        14G  507M   13G   4% /
devtmpfs        3.7G  8.0K  3.7G   1% /dev
tmpfs           3.8G     0  3.8G   0% /dev/shm
tmpfs           3.8G  196K  3.8G   1% /tmp
tmpfs           3.8G  316K  3.8G   1% /run
/dev/mmcblk0p7  123M   13M  104M  11% /oem
/dev/mmcblk0p8   15G   25K   15G   1% /userdata
/dev/sda1        32G  7.7G   25G  24% /media/udisk0
root@RK3588:/# 
root@RK3588:/# 
root@RK3588:/# cd /media/udisk
sh: cd: /media/udisk: No such file or directory
root@RK3588:/# cd /media/udisk
udisk0/ udisk1/ udisk2/ udisk3/ 
root@RK3588:/# cd /media/udisk0
root@RK3588:/media/udisk0# ls -l
total 2720
drwxr-xr-x  2 root root   32768 Nov 29  2022  1
drwxr-xr-x  2 root root   32768 Nov 28  2022  20221128
drwxr-xr-x  3 root root   32768 Nov 29  2022  20221129
drwxr-xr-x  2 root root   32768 Jan  9  2023  Alarms
drwxr-xr-x  2 root root   32768 Jan  9  2023  Audiobooks
-rwxr-xr-x  1 root root    1442 Nov 29  2022  BOOTEX.LOG
drwxr-xr-x  2 root root   32768 Jan  9  2023  LOST.DIR
drwxr-xr-x  2 root root   32768 Jan  9  2023  Notifications
drwxr-xr-x  3 root root   32768 Jan  9  2023  Pictures
drwxr-xr-x  2 root root   32768 Jan  9  2023  Podcasts
drwxr-xr-x  2 root root   32768 Jan  9  2023  Recordings
drwxr-xr-x  3 root root   32768 Dec 17  2022  Recovery
-rwxr-xr-x  1 root root       0 Dec 17  2022  Recovery.txt
drwxr-xr-x  2 root root   32768 Jan  9  2023  Ringtones
drwxr-xr-x  2 root root   32768 Nov 18  2021 'System Volume Information'
-rwxr-xr-x  1 root root     128 Oct  7  2021  autorun.inf
drwxr-xr-x  5 root root   32768 Nov 18  2021  boot
-rwxr-xr-x  1 root root  413738 Oct  7  2021  bootmgr
-rwxr-xr-x  1 root root 1541648 Oct  7  2021  bootmgr.efi
drwxr-xr-x  4 root root   32768 Nov 18  2021  efi
-rwxr-xr-x  1 root root   74184 Oct  7  2021  setup.exe
drwxr-xr-x 12 root root   32768 Nov 18  2021  sources
drwxr-xr-x  3 root root   32768 Nov 18  2021  support
-rwxr-xr-x  1 root root     202 Dec  1  2022 ''$'\346\226\260\345\273\272\346\226\207\346\234\254\346\226\207\346\241\243''.txt'
drwxr-xr-x  6 root root   32768 Nov 26  2022 ''$'\347\274\226\347\250\213'
root@RK3588:/media/udisk0# 
root@RK3588:/media/udisk0# cd ~/
root@RK3588://# cd /
root@RK3588:/# 
root@RK3588:/# ll
sh: ll: command not found
root@RK3588:/# ls -l
total 70
drwxr-xr-x   2 root root  4096 Jan  8  2023 bin
-rw-r--r--   1 root root   351 Apr 20  2022 busybox.fragment
lrwxrwxrwx   1 root root     8 Jan  8  2023 data -> userdata
drwxr-xr-x  15 root root  3480 Jan  1 12:13 dev
drwxr-xr-x  21 root root  4096 Jan  1 12:00 etc
drwxr-xr-x   6 root root  4096 Jan  8  2023 lib
lrwxrwxrwx   1 root root     3 Jan  8  2023 lib64 -> lib
lrwxrwxrwx   1 root root    11 Jan  8  2023 linuxrc -> bin/busybox
drwx------   2 root root 16384 Jan  8  2023 lost+found
drwxr-xr-x  14 root root  4096 Jan  8  2023 media
lrwxrwxrwx   1 root root    23 Apr  8  2022 misc -> /dev/block/by-name/misc
drwxr-xr-x   4 root root  4096 Jan  8  2023 mnt
drwxr-xr-x   3 root root  1024 Jan  8  2023 oem
drwxr-xr-x   2 root root  4096 Apr  8  2022 opt
dr-xr-xr-x 282 root root     0 Jan  1 12:00 proc
drwxr-xr-x  16 root root  4096 Jan  8  2023 rockchip-test
drwx------   2 root root  4096 Apr  8  2022 root
drwxr-xr-x   7 root root   360 Jan  1 12:13 run
drwxr-xr-x   2 root root  4096 Jan  8  2023 sbin
lrwxrwxrwx   1 root root    10 Jan  8  2023 sdcard -> mnt/sdcard
dr-xr-xr-x  14 root root     0 Jan  1 12:00 sys
drwxr-xr-x   4 root root  4096 Jan  8  2023 system
drwxrwxrwt  10 root root   360 Jan  1 12:09 tmp
lrwxrwxrwx   1 root root     9 Jan  8  2023 udisk -> mnt/udisk
drwxr-xr-x   6 root root  1024 Jan  1 12:00 userdata
drwxr-xr-x   7 root root  4096 Jan  8  2023 usr
drwxr-xr-x   5 root root  4096 Jan  8  2023 var
lrwxrwxrwx   1 root root     6 Jan  8  2023 vendor -> system
root@RK3588:/# 
root@RK3588:/# cd udisk/
root@RK3588:/udisk# ls -l
total 0
root@RK3588:/udisk# 
root@RK3588:/udisk# cd /
root@RK3588:/# 
root@RK3588:/# cd sdcard
root@RK3588:/sdcard# 
root@RK3588:/sdcard# ls -l
total 0
root@RK3588:/sdcard# 
root@RK3588:/sdcard# 
root@RK3588:/sdcard# 
root@RK3588:/sdcard# 
root@RK3588:/sdcard# 
root@RK3588:/sdcard# 
root@RK3588:/sdcard# 
root@RK3588:/sdcard# 
root@RK3588:/sdcard# 
root@RK3588:/sdcard# 
root@RK3588:/sdcard# 
root@RK3588:/sdcard# 
root@RK3588:/sdcard# 
root@RK3588:/sdcard# 
root@RK3588:/sdcard# [ 1702.387772] adbd (1143): /proc/1143/oom_adj is deprecated, please use /proc/1143/oom_score_adj instead.

[END] 2023/1/9 14:23:25