理解K系列与ultra-scale的区别

 

 总结：   K系列FPGA与KU系列FPGA的主要区别，体现在： （1）工艺制程不一样，K-28nm，KU-20nm；   （2）Ultra-Scale采用SSI；大容量K系列也采用SSI，SSI为了解决资源过多，使用多块硅片 ；   

                                              （3）KU资源更多，性能更高；

 

 

 

　　Introduction to the UltraScale Architecture The Xilinx® UltraScale™ architecture is the first ASIC-class All Programmable architecture to enable multi-hundred gigabit-per-second levels of system performance with smart processing, while efficiently routing and processing data on-chip. UltraScale architecture-based devices address a vast spectrum of high-bandwidth, high-utilization system requirements by using industry-leading technical innovations, including next-generation routing, ASIC-like clocking, 3D-on-3D ICs, multiprocessor SoC (MPSoC) technologies, and new power reduction features. The devices share many building blocks, providing scalability across process nodes and product families to leverage system-level investment across platforms. Virtex® UltraScale+™ MPSoC devices provide the highest performance and integration capabilities in a FinFET node, including both the highest serial I/O and signal processing bandwidth, as well as the highest on-chip memory density. As the industry's most capable FPGA family, the Virtex UltraScale+ devices are ideal for applications including 1+Tb/s networking and data center and fully integrated radar/early-warning systems. Virtex UltraScale+ MPSoC devices provide the greatest performance and integration at 20 nm, including serial I/O bandwidth and logic capacity. As the industry's only high-end FPGA at the 20 nm process node, this family is ideal for applications including 400G networking, large scale ASIC prototyping, and emulation. Kintex® UltraScale+ devices provide the best price/performance/watt balance in a FinFET node, delivering the most cost-effective solution for high-end capabilities, including transceiver and memory interface line rates as well as 100G connectivity cores. Our newest mid-range family is ideal for both packet processing and DSP-intensive functions and is well suited for applications including wireless MIMO technology, Nx100G networking, and data center.

　　Kintex UltraScale devices provide the best price/performance/watt at 20 nm and include the highest signal processing bandwidth in a mid-range device, next-generation transceivers, and low-cost packaging for an optimum blend of capability and cost-effectiveness. The family is ideal for packet processing in 100G networking and data centers applications as well as DSP-intensive processing needed in next-generation medical imaging, 8k4k video, and heterogeneous wireless infrastructure. Zynq® UltraScale+ MPSoC devices provide 64-bit processor scalability while combining real-time control with soft and hard engines for graphics, video, waveform, and packet processing. Integrating an ARM®-based system for advanced analytics and on-chip programmable logic for task acceleration creates unlimited possibilities for applications including 5G Wireless, next generation ADAS, and Industrial Internet-of-Things.

 

 

      K系列FPGA vs.  KU系列FPGA   ：

     

         Ultrascale系列FPGA只有没有AU系列，只有KU/VU/ZU系列；UltraScale系列中多了 Ultra-RAM/HBM-DRAM资源；

 

        * 7 series families comparison 表格中Logic Cells代表系列中最大值；S7系列没有收发器和PCIe接口。

       FPGA中，Logic cells资源对应的FPGA的什么结构？

 

参考：

    ug1026-ultrascale architecture migration;

    ds890-ultrascale-overview;

    ds180-7 Series FPGAs Data Sheet: Overview

 

转载于:https://www.cnblogs.com/limanjihe/p/9802758.html