java 读取串口数据demo_Arduino Uno 连接JY-61陀螺仪模块 串口读取数据

最近偶然得到一块维特智能的JY-61的陀螺仪模块，

其功能是，直接输出MPU6050经卡尔曼滤波等算法得出的角度，角加速度数据

省下很多功夫，但我对其算法更感兴趣

自己焊接的底板，手艺还有待提升

本示例演示的是串口方式读取数据，还有IIC连接，以后有机会再分享

实验效果

BOM

Arduino Uno *1

JY-61 *1（含邮票底板）

跳线若干

接线方式

Arduino UNO --- JY-61

5V <---> VCC

GND <---> GND

0(RX) <---> TX

程序

需要用到JY901的库，找到JY901.ZIP

http://pan.baidu.com/s/1i50UmxB

把库文件夹存放在Arduino 安装目录的libraries库文件夹

程序&库打包下载：LS_JY901.zip - 免费高速下载 - 城通网盘-50TB超大网盘

文件夹说明：

JY901 —— JY901陀螺仪库

LS_JY901 —— 主程序

#include <Wire.h>

#include <JY901.h>

/*

Test on Uno R3.

JY901 UnoR3

TX <---> 0(Rx)

*/

void setup()

{

Serial.begin(115200);

}

void loop()

{

//print received data. Data was received in serialEvent;

Serial.print("Time:20");Serial.print(JY901.stcTime.ucYear);Serial.print("-");Serial.print(JY901.stcTime.ucMonth);Serial.print("-");Serial.print(JY901.stcTime.ucDay);

Serial.print(" ");Serial.print(JY901.stcTime.ucHour);Serial.print(":");Serial.print(JY901.stcTime.ucMinute);Serial.print(":");Serial.println((float)JY901.stcTime.ucSecond+(float)JY901.stcTime.usMiliSecond/1000);

Serial.print("Acc:");Serial.print((float)JY901.stcAcc.a[0]/32768*16);Serial.print(" ");Serial.print((float)JY901.stcAcc.a[1]/32768*16);Serial.print(" ");Serial.println((float)JY901.stcAcc.a[2]/32768*16);

Serial.print("Gyro:");Serial.print((float)JY901.stcGyro.w[0]/32768*2000);Serial.print(" ");Serial.print((float)JY901.stcGyro.w[1]/32768*2000);Serial.print(" ");Serial.println((float)JY901.stcGyro.w[2]/32768*2000);

Serial.print("Angle:");Serial.print((float)JY901.stcAngle.Angle[0]/32768*180);Serial.print(" ");Serial.print((float)JY901.stcAngle.Angle[1]/32768*180);Serial.print(" ");Serial.println((float)JY901.stcAngle.Angle[2]/32768*180);

Serial.print("Mag:");Serial.print(JY901.stcMag.h[0]);Serial.print(" ");Serial.print(JY901.stcMag.h[1]);Serial.print(" ");Serial.println(JY901.stcMag.h[2]);

Serial.print("Pressure:");Serial.print(JY901.stcPress.lPressure);Serial.print(" ");Serial.println((float)JY901.stcPress.lAltitude/100);

Serial.print("DStatus:");Serial.print(JY901.stcDStatus.sDStatus[0]);Serial.print(" ");Serial.print(JY901.stcDStatus.sDStatus[1]);Serial.print(" ");Serial.print(JY901.stcDStatus.sDStatus[2]);Serial.print(" ");Serial.println(JY901.stcDStatus.sDStatus[3]);

Serial.print("Longitude:");Serial.print(JY901.stcLonLat.lLon/10000000);Serial.print("Deg");Serial.print((double)(JY901.stcLonLat.lLon % 10000000)/1e5);Serial.print("m Lattitude:");

Serial.print(JY901.stcLonLat.lLat/10000000);Serial.print("Deg");Serial.print((double)(JY901.stcLonLat.lLat % 10000000)/1e5);Serial.println("m");

Serial.print("GPSHeight:");Serial.print((float)JY901.stcGPSV.sGPSHeight/10);Serial.print("m GPSYaw:");Serial.print((float)JY901.stcGPSV.sGPSYaw/10);Serial.print("Deg GPSV:");Serial.print((float)JY901.stcGPSV.lGPSVelocity/1000);Serial.println("km/h");

Serial.println("");

delay(500);

}

/*

SerialEvent occurs whenever a new data comes in the

hardware serial RX. This routine is run between each

time loop() runs, so using delay inside loop can delay

response. Multiple bytes of data may be available.

*/

void serialEvent()

{

while (Serial.available())

{

JY901.CopeSerialData(Serial.read()); //Call JY901 data cope function

}

}

---------------------

版权声明：本文为CSDN博主「ling3ye」的原创文章，遵循CC 4.0 by-sa版权协议，转载请附上原文出处链接及本声明。

原文链接：

https://blog.csdn.net/ling3ye/article/details/53506452​blog.csdn.net