测试摄像头为夜视模式和正常模式的切换

安装GPIO库

sudo pip3 install Jetson.GPIO

cd ~/jetson-gpio/samples
sudo python3 jetson-gpio-testok.py

import Jetson.GPIO as GPIO
import time as time          #引用需要用的库
LED_Pin = 11
GPIO.setmode(GPIO.BOARD)
GPIO.setup(LED_Pin, GPIO.OUT)#设置要操作的引脚,并将引脚设置为输出引脚
while (True):
   GPIO.output(LED_Pin, GPIO.HIGH)
   time.sleep(10)
   GPIO.output(LED_Pin, GPIO.LOW)
   time.sleep(10)              #通过切换GPIO的电平来点亮和熄灭LED
GPIO.cleanup()                #最后在退出循环的时候清楚GPIO的状态