Boost升压变换器是一种DC/DC功率变换器,它将电压从输入(源)升高到输出(负载)。
A boost converter is a DC/DC power converter which steps up voltage from its input (source) to its output (load).
在连续传导模式下(通过电感的电流永远不会降到零),boost变换器的理论传递函数为:
In continuous conduction mode (current through the inductor never falls to zero), the theoretical transfer function of the boost converter is:
where is the duty cycle.0.5
在本例中,变换器从250V电源馈送RC负载,并且将PWM频率设置为31kHz。
In this example, the converter is feeding an RC load from a 250 V source and the PWM frequency is set to 31 kHz.
运行仿真并在示波器上观察波形。
Run the simulation and observe waveforms on Scope.
验证负载电压(Vout)的平均值非常接近理论值:Vout=250/(1-0.5)=500 V。
Verify that the mean value of the load voltage (Vout) is very close to the theoretical value of: Vout = 250 / (1 - 0.5) = 500 V.
更多精彩文章请关注公众号: