【源码】具有MPPT和微型电池储能的太阳能光伏发电装置仿真

在微电网中，微源和存储设备通过微源控制器（MCs）与馈线连接，微源之间的协调由中央控制器（CC）执行。

In a microgrid, the microsources andstorage devices are connected to the feeders through the microsourcecontrollers (MCs) and the coordination among the microsources is carried out bythe central controller (CC).

微电网通过断路器连接至公共耦合点（PCC）的中压级公用电网。

The microgrid is connected to the mediumvoltage level utility grid at the point of common coupling (PCC) through thecircuit breakers.

当微电网与电网连接时，电压和频率的操作控制完全由电网完成；然而，微电网仍然在PCC上提供临界负载，从而充当PQ总线。

When a microgrid is connected to the grid,the operational control of voltage and frequency is done entirely by the grid;however, a microgrid still supplies the critical loads at PCC, thus, acting asa PQ bus.

在孤岛状态下，微电网必须独立于电网而独立运行，以控制微电网的电压和频率，因此其作用类似于PV(电源-电压)总线。

In islanded condition, a microgrid has tooperate on its own, independent of the grid, to control the voltage andfrequency of the microgrid and hence, acts like a PV (power-voltage) bus.

这两种模式的操作和管理都是通过本地的微源控制器（MCs）和全局中央控制器（CCs）来控制和协调的。

The operation and management in both themodes is controlled and coordinated with the help of microsource controllers(MCs) at the local level and central controller (CCs) at the global level.

SIMULINK源代码下载地址：

http://page5.dfpan.com/fs/0l3cbjd24231b2b9166/

更多精彩文章请关注微信号：