【HFSS】在CMOS工艺下自动修改金属属性和设置端口

1.待解决的问题描述

从ADS画好的版图导出为gds文件后，再导入到HFSS进行仿真时，金属层和通孔都是没有定义的，需要人为定义。如果端口过多，设置起来也比较麻烦。计算机正好处理这种重复的工作，因此可以用HFSS script实现。

2.代码实现

2.1 预定义

# ----------------------------------------------
# Script Recorded by ANSYS Electronics Desktop Version 2021.1.0
# created by wujunyu 2022/04/08
# ----------------------------------------------
# coding=<UTF-8>
import ScriptEnv

ScriptEnv.Initialize("Ansoft.ElectronicsDesktop")
oDesktop.RestoreWindow()
oProject = oDesktop.GetActiveProject()
oProject = oDesktop.SetActiveProject(oProject.GetName())
oDesign = oProject.SetActiveDesign("HFSS_0407_passive1")
oEditor = oDesign.SetActiveEditor("3D Modeler")

objname = oEditor.GetObjectName(0)
object_num = oEditor.GetNumObjects()

# all object name
object_list = []
# Matels and Vias name
Matels_Vias = [0, "\"Copper_M1\"", "\"Copper_M2\"", "\"Copper_M3\"", "\"Copper_M4\"", "\"Copper_M5\"", "\"Copper_M6\"",
			   "\"Copper_M7\"", "\"Copper_M8\"", "\"Copper_M9\"",
			   0, "\"VIA1\"", "\"VIA2\"", "\"VIA3\"", "\"VIA4\"", "\"VIA5\"", "\"VIA6\"", "\"VIA7\"", "\"VIA8\""]
# heigth: for example: h[9] is the distance from M9 to M1
h = [0, 0.18*1e-6, 0.575*1e-6, 0.97*1e-6, 1.365*1e-6, 1.76*1e-6, 2.155*1e-6, 2.55*1e-6, 4.045*1e-6, 8.185*1e-6]

object_Material_list = []
object_change_list = []
port_face_list = []
face_change_list = []
GND_M1 = []

需要修改的是这一行：
oDesign = oProject.SetActiveDesign(“HFSS_0407_passive1”)
如图，改成自己project下的文件名

2.2 获取HFSS object的名称并分类

# get object name from HFSS to object_list
for i in range(object_num):
	object_name = oEditor.GetObjectName(i)
	object_list.append(object_name)
# print(object_list)

# Judge material from object_list
for i in range(object_num):
	object = object_list[i].split('_')
	object_front = object[0]
	if 'ObjectFromEdge' in object_list[i]:
		# lumped port line
		if object_front == 'm1':
			port_face_list.append(1)
			face_change_list.append(object_list[i])
		elif object_front == 'm2':
			port_face_list.append(2)
			face_change_list.append(object_list[i])
		elif object_front == 'm3':
			port_face_list.append(3)
			face_change_list.append(object_list[i])
		elif object_front == 'm4':
			port_face_list.append(4)
			face_change_list.append(object_list[i])
		elif object_front == 'm5':
			port_face_list.append(5)
			face_change_list.append(object_list[i])
		elif object_front == 'm6':
			port_face_list.append(6)
			face_change_list.append(object_list[i])
		elif object_front == 'm7':
			port_face_list.append(7)
			face_change_list.append(object_list[i])
		elif object_front == 'm8':
			port_face_list.append(8)
			face_change_list.append(object_list[i])
		elif object_front == 'm9':
			port_face_list.append(9)
			face_change_list.append(object_list[i])

	else:

		# metal or vias
		if object_front == 'm1':
			object_Material_list.append(1)
			object_change_list.append(object_list[i])
			GND_M1.append(object_list[i])
		elif object_front == 'm2':
			object_Material_list.append(2)
			object_change_list.append(object_list[i])
		elif object_front == 'm3':
			object_Material_list.append(3)
			object_change_list.append(object_list[i])
		elif object_front == 'm4':
			object_Material_list.append(4)
			object_change_list.append(object_list[i])
		elif object_front == 'm5':
			object_Material_list.append(5)
			object_change_list.append(object_list[i])
		elif object_front == 'm6':
			object_Material_list.append(6)
			object_change_list.append(object_list[i])
		elif object_front == 'm7':
			object_Material_list.append(7)
			object_change_list.append(object_list[i])
		elif object_front == 'm8':
			object_Material_list.append(8)
			object_change_list.append(object_list[i])
		elif object_front == 'm9':
			object_Material_list.append(9)
			object_change_list.append(object_list[i])
		elif object_front == 'via1':
			object_Material_list.append(11)
			object_change_list.append(object_list[i])
		elif object_front == 'via2':
			object_Material_list.append(12)
			object_change_list.append(object_list[i])
		elif object_front == 'via3':
			object_Material_list.append(13)
			object_change_list.append(object_list[i])
		elif object_front == 'via4':
			object_Material_list.append(14)
			object_change_list.append(object_list[i])
		elif object_front == 'via5':
			object_Material_list.append(15)
			object_change_list.append(object_list[i])
		elif object_front == 'via6':
			object_Material_list.append(16)
			object_change_list.append(object_list[i])
		elif object_front == 'via7':
			object_Material_list.append(17)
			object_change_list.append(object_list[i])
		elif object_front == 'via8':
			object_Material_list.append(18)
			object_change_list.append(object_list[i])

2.3 改变金属属性

# change material
for i in range(len(object_change_list)):
	print(object_change_list[i], Matels_Vias[object_Material_list[i]])
	oEditor.ChangeProperty(
		[
			"NAME:AllTabs",
			[
				"NAME:Geometry3DAttributeTab",
				[
					"NAME:PropServers",
					object_change_list[i]
				],
				[
					"NAME:ChangedProps",
					[
						"NAME:Material",
						"Value:="		, Matels_Vias[object_Material_list[i]]
					]
				]
			]
		])
	print(object_change_list[i], Matels_Vias[object_Material_list[i]])

2.4 设置端口

# Add lumped port face
for i in range(len(port_face_list)):
	oEditor.SweepAlongVector(
		[
			"NAME:Selections",
			"Selections:="		, face_change_list[i],
			"NewPartsModelFlag:="	, "Model"
		],
		[
			"NAME:VectorSweepParameters",
			"DraftAngle:="		, "0deg",
			"DraftType:="		, "Round",
			"CheckFaceFaceIntersection:=", False,
			"SweepVectorX:="	, "0um",
			"SweepVectorY:="	, "0um",
			"SweepVectorZ:="	, -h[port_face_list[i]]
		])

# Add lumped port by FaceID
# Unite M1 as GND
GND_M1_str = ','.join([str(i) for i in GND_M1])
print('"{}"'.format(GND_M1_str))
if len(GND_M1) != 1:
	oEditor.Unite(
		[
			"NAME:Selections",
			"Selections:="		, GND_M1_str
		],
		[
			"NAME:UniteParameters",
			"KeepOriginals:="	, False
		])
# Get faceID and  Add port
faceID = []
for i in range(len(face_change_list)):
	ID = oEditor.GetFaceIDs(face_change_list[i])
	faceID.append(ID[0])

	oModule = oDesign.GetModule("BoundarySetup")
	oModule.AutoIdentifyPorts(
		[
			"NAME:Faces",
			faceID[i]
		], False,
		[
			"NAME:ReferenceConductors",
			GND_M1[0]
		], "1", True)
print(faceID)

oProject.Save()
# oProject.Close()

设置端口的方法为：
在HFSS按“E”，即选择端口所在的Edge,再在draw->Edge->create object from edge
设置完后，如图

3.使用步骤和结果展示

1.修改为自己的project下的文件的名称,保存文件
oDesign = oProject.SetActiveDesign(“HFSS_0407_passive1”)
2.在HFSS按“E”，即选择端口所在的Edge,再在draw->Edge->create object from edge
3.完成所有的端口选择后，在Automation->run script->选择脚本

可以看到自动分类定义好了属性，还设置了lumped port 端口