静态综合实验

静态综合实验

实验拓扑图：

其中包含实验要求以及子网划分

实验配置：

R1：

[r1]int g 0/0/0
[r1-GigabitEthernet0/0/0]ip ad 192.168.1.1 30 
[r1-GigabitEthernet0/0/0]int g 0/0/1
[r1-GigabitEthernet0/0/1]ip ad 192.168.1.5 30
[r1-GigabitEthernet0/0/1]int l0
[r1-LoopBack0]ip ad 192.168.1.33 28
[r1-LoopBack0]int l1
[r1-LoopBack1]ip ad 192.168.1.49 28
 
[r1]ip route-static 0.0.0.0 0 192.168.1.2
[r1]ip route-static 0.0.0.0 0 192.168.1.6
[r1]ip route-static 192.168.1.64 27 192.168.1.2
[r1]ip route-static 192.168.1.8 30 192.168.1.2
[r1]ip route-static 192.168.1.12 30 192.168.1.6
[r1]ip route-static 192.168.1.128 28 192.168.1.6
 
[r1]ip route-static 192.168.1.32 27 NULL 0
 
[r1]aaa	
[r1-aaa]local-user aaa privilege level 15 password cipher 12345
Info: Add a new user.
[r1-aaa]local-user aaa service-type telnet
[r1-aaa]q
[r1]user-interface vty 0 4	
[r1-ui-vty0-4]authentication-mode aaa
 

​ R1路由表

R1配置：

[r2]int g 0/0/0
[r2-GigabitEthernet0/0/0]ip ad 192.168.1.2 30
[r2-GigabitEthernet0/0/0]int g 0/0/1
[r2-GigabitEthernet0/0/1]ip add 192.168.1.9 30 
[r2-GigabitEthernet0/0/1]int l0
[r2-LoopBack0]ip ad 192.168.1.65 28
[r2-LoopBack0]int l1
[r2-LoopBack1]ip ad 192.168.1.81 28
 
[r2]ip route-static 0.0.0.0 0 192.168.1.10
[r2]ip route-static 192.168.1.128 28 192.168.1.10
[r2]ip route-static 192.168.1.128 28 192.168.1.1
[r2]ip route-static 192.168.1.4 30 192.168.1.1
[r2]ip route-static 192.168.1.32 27 192.168.1.1
  
[r2]ip route-static 192.168.1.64 27 NULL 0

R2路由表：

R3配置：

[r3]int g 0/0/0
[r3-GigabitEthernet0/0/0]ip ad 192.168.1.6 30
[r3-GigabitEthernet0/0/0]int g 0/0/1
[r3-GigabitEthernet0/0/1]ip ad 192.168.1.13 30
[r3-GigabitEthernet0/0/1]int g0/0/2
[r3-GigabitEthernet0/0/2]ip ad 192.168.1.129 30
[r3]ip route-static 0.0.0.0 0 192.168.1.14
[r3]ip route-static 192.168.1.0 30 192.168.1.5
[r3]ip route-static 192.168.1.32 27 192.168.1.5
[r3]ip route-static 192.168.1.64 27 192.168.1.5
[r3]ip route-static 192.168.1.64 27 192.168.1.14
[r3]dhcp enable
[r3]ip pool aa
Info: It's successful to create an IP address pool.
[r3-ip-pool-aa]network 192.168.1.128 mask 28
[r3-ip-pool-aa]gateway-list 192.168.1.129
[r3-ip-pool-aa]dns-list 8.8.8.8
[r3]int g 0/0/2
[r3-GigabitEthernet0/0/2]dhcp select global 

R3路由表：

R4配置：

[r4]int g 0/0/0
[r4-GigabitEthernet0/0/0]ip ad 192.168.1.10 30 
[r4-GigabitEthernet0/0/0]int g 0/0/1
[r4-GigabitEthernet0/0/1]ip ad 192.168.1.14 30
[r4-GigabitEthernet0/0/1]
[r4-GigabitEthernet0/0/1]int g 0/0/2
[r4-GigabitEthernet0/0/2]ip ad 192.168.1.17 30
[r4-GigabitEthernet0/0/2] 
[r4-GigabitEthernet0/0/2]int g 4/0/0
[r4-GigabitEthernet4/0/0]ip ad 192.168.1.21 30
[r4-GigabitEthernet4/0/0]
[r4-GigabitEthernet4/0/0]int l0
[r4-LoopBack0]ip ad 192.168.1.97 28
[r4-LoopBack0]int l1
[r4-LoopBack1]ip ad 192.168.1.113 28
 
[r4]ip route-static 0.0.0.0 0 192.168.1.18
[r4]ip route-static 0.0.0.0 0 192.168.1.22 preference 70
[r4]ip route-static 192.168.1.64 27 192.168.1.9
[r4]ip route-static 192.168.1.128 28 192.168.1.13
[r4]ip route-static 192.168.1.0 30 192.168.1.9
[r4]ip route-static 192.168.1.4 30 192.168.1.13
[r4]ip route-static 192.168.1.32 27 192.168.1.9
[r4]ip route-static 192.168.1.32 27 192.168.1.13
 
[r4]ip route-static 192.168.1.0 24 NULL 0

R4路由表：

R5配置：

[r5]int g 0/0/0
[r5-GigabitEthernet0/0/0]ip ad 192.168.1.18 30
[r5-GigabitEthernet0/0/0]int g 0/0/1
[r5-GigabitEthernet0/0/1]ip ad 12.0.0.1 24
[r5-GigabitEthernet0/0/1]int g 0/0/2
[r5-GigabitEthernet0/0/2]ip ad 192.168.1.22 30
[r5-GigabitEthernet0/0/2]
[r5-GigabitEthernet0/0/2]int l0
[r5-LoopBack0]ip ad 192.168.1.145 28
 
[r5]ip route-static 0.0.0.0 0 12.0.0.2
[r5]ip route-static 192.168.1.0 24 192.168.1.17
[r5]ip route-static 192.168.1.0 24 192.168.1.21 preference 70
 
[r5]acl 2000 
[r5-acl-basic-2000]rule permit source 192.168.1.0 0.0.0.255
[r5-acl-basic-2000]q
[r5]int g 0/0/1	
[r5-GigabitEthernet0/0/1]nat outbound 2000
[r5-GigabitEthernet0/0/1]q
 
 
[r5]int g 0/0/1   	
[r5-GigabitEthernet0/0/1]nat server protocol tcp global current-interface 23 ins
ide 192.168.1.1 23
Warning:The port 23 is well-known port. If you continue it may cause function fa
ilure.
Are you sure to continue?[Y/N]:y

R5路由表：

R6配置：

[r6]int g 0/0/0
[r6-GigabitEthernet0/0/0]ip ad 12.0.0.2 24
[r6-GigabitEthernet0/0/0]int l0
[r6-LoopBack0]ip ad 1.1.1.1 24

实验结果：

dhcp自动获取IP地址，以PC1为例：

R1-R5可以访问R6的环回，以R1为例：

R6 telnet R5的公有IP地址时,实际登陆到R1上：