1、准备
ESP32 单片机开发板
ST7789 LCD 模块（240 * 320 像素）
杜邦线
2、接线
| LCD | 功能 | ESP32 |
|---|---|---|
| VCC |
供电电压正极
|
3.3V
、
5V
|
| GND |
供电电压负极
| GND |
| IDN / MOSI |
SPI
接口数据
引脚
| 23 |
| CLK |
串行接口时钟信号
| 18 |
| CS |
芯片选择引脚；低电平有效
| 5 |
| DC |
显示数据
/
命令选择引脚
| 27 |
| RST |
复位引脚，低电平有效
| 26 |
| BL |
背光阴极
| 4 |
3、安装库
| TFT_eSPI | 通过SPI方式驱动LCD，支持多种LCD常用驱动IC |
| AnimatedGIF | GIF的解码库，用来显示GIF动图 |
（ 添加 TFT_eSPI 库提示找不到 SPI.h，在 platformio.ini 文件中添加 lib_ldf_mode = deep+）
TFT_eSPI 库修改配置文件
该库有 User_Setup.h 和 User_Setup_Select.h 两个配置文件，支持 ① 自定义参数或 ② 使用已有配置驱动TFT屏幕。
选择 LCD 型号
// Only define one driver, the other ones must be commented out
//#define ILI9341_DRIVER // Generic driver for common displays
//#define ILI9341_2_DRIVER // Alternative ILI9341 driver, see https://github.com/Bodmer/TFT_eSPI/issues/1172
//#define ST7735_DRIVER // Define additional parameters below for this display
//#define ILI9163_DRIVER // Define additional parameters below for this display
//#define S6D02A1_DRIVER
//#define RPI_ILI9486_DRIVER // 20MHz maximum SPI
//#define HX8357D_DRIVER
//#define ILI9481_DRIVER
//#define ILI9486_DRIVER
//#define ILI9488_DRIVER // WARNING: Do not connect ILI9488 display SDO to MISO if other devices share the SPI bus (TFT SDO does NOT tristate when CS is high)
#define ST7789_DRIVER // Full configuration option, define additional parameters below for this display
//#define ST7789_2_DRIVER // Minimal configuration option, define additional parameters below for this display
//#define R61581_DRIVER
//#define RM68140_DRIVER
//#define ST7796_DRIVER
//#define SSD1351_DRIVER
//#define SSD1963_480_DRIVER
//#define SSD1963_800_DRIVER
//#define SSD1963_800ALT_DRIVER
//#define ILI9225_DRIVER
//#define GC9A01_DRIVER选择显示颜色
// #define TFT_RGB_ORDER TFT_RGB // Colour order Red-Green-Blue
#define TFT_RGB_ORDER TFT_BGR // Colour order Blue-Green-Red选择 LCD 屏幕尺寸
// For ST7789, ST7735, ILI9163 and GC9A01 ONLY, define the pixel width and height in portrait orientation
// #define TFT_WIDTH 80
// #define TFT_WIDTH 128
// #define TFT_WIDTH 172 // ST7789 172 x 320
// #define TFT_WIDTH 170 // ST7789 170 x 320
#define TFT_WIDTH 240 // ST7789 240 x 240 and 240 x 320
// #define TFT_HEIGHT 160
// #define TFT_HEIGHT 128
//#define TFT_HEIGHT 240 // ST7789 240 x 240
#define TFT_HEIGHT 320 // ST7789 240 x 320
// #define TFT_HEIGHT 240 // GC9A01 240 x 240选择 LCD 屏幕连接单片机引脚
// For ESP32 Dev board (only tested with ILI9341 display)
// The hardware SPI can be mapped to any pins
#define TFT_MISO 19
#define TFT_MOSI 23
#define TFT_SCLK 18
#define TFT_CS 5 // Chip select control pin
#define TFT_DC 27 // Data Command control pin
#define TFT_RST 26 // Reset pin (could connect to RST pin)
//#define TFT_RST -1 // Set TFT_RST to -1 if display RESET is connected to ESP32 board RSTTFT_eSPI 库一些 API
初始化
tft.init(); // 初始化
tft.fillScreen(uint32_t color); // 填充全屏幕
tft.invertDisplay(bool i); // 屏幕旋转，反转显示颜色i = 1反转，i = 0正常
显示设置
设置起始坐标位置和字号
void setCursor(int16_t x, int16_t y); // 设置文本显示坐标，默认以文本左上角为参考点，可以改变参考点
void setCursor(int16_t x, int16_t y, uint8_t font); // 设置文本显示坐标，和文本的字体
设置字体颜色
void setTextColor(uint16_t color); // 设置文本颜色
void setTextColor(uint16_t fgcolor, uint16_t bgcolor); // 设置文本颜色与背景色
设置字体大小
void setTextSize(uint8_t size); // 设置文本大小，文本大小范围为 1~7 的整数
显示字体
tft.print("Hello World!");
tft.println("Hello World!");
显示字符串(居左)
int16_t drawString(const String &string, int32_t x, int32_t y)
int16_t drawString(const char *string, int32_t x, int32_t y)
int16_t drawString(const String &string, int32_t x, int32_t y, uint8_t font)
int16_t drawString(const char *string, int32_t x, int32_t y, uint8_t font)
显示字符串(居中)
int16_t drawCentreString(const char *string, int32_t x, int32_t y, uint8_t font)
int16_t drawCentreString(const String &string, int32_t x, int32_t y, uint8_t font)
显示字符串(居右)
int16_t drawRightString(const char *string, int32_t x, int32_t y, uint8_t font)
int16_t drawRightString(const String &string, int32_t x, int32_t y, uint8_t font)
显示字符
int16_t drawChar(uint16_t uniCode, int32_t x, int32_t y)
int16_t drawChar(uint16_t uniCode, int32_t x, int32_t y, uint8_t font)
void drawChar(int32_t x, int32_t y, uint16_t c, uint32_t color, uint32_t bg, uint8_t size)
显示浮点数
int16_t TFT_eSPI::drawFloat(float floatNumber, uint8_t decimal, int32_t x, int32_t y)
int16_t TFT_eSPI::drawFloat(float floatNumber, uint8_t decimal, int32_t x, int32_t y, uint8_t font)
显示数字
int16_t drawNumber(long intNumber, int32_t x, int32_t y)
int16_t drawNumber(long intNumber, int32_t x, int32_t y, uint8_t font)
绘制
画点
void drawPixel(int32_t x, int32_t y, uint32_t color)
画线
void drawLine(int32_t xs, int32_t ys, int32_t xe, int32_t ye, uint32_t color)
画横线(快速)
void drawFastHLine(int32_t x, int32_t y, int32_t w, uint32_t color)
画竖线(快速)
void drawFastVLine(int32_t x, int32_t y, int32_t h, uint32_t color)
画空心圆
tft.drawCircle(100,100,50,TFT_RED);
画实心圆
void fillCircle(int32_t x, int32_t y, int32_t r, uint32_t color)
void fillRect(int32_t x,int32_t y,int32_t w,int32_t h,uint32_t color)
画空心椭圆
tft.drawEllipse(100,100,100,60,TFT_GREENYELLOW);
画实心椭圆
void drawRect(int32_t x, int32_t y, int32_t w, int32_t h, uint32_t color)
画空心矩形
void drawRect(int32_t x, int32_t y, int32_t w, int32_t h, uint32_t color)
画实心矩形
void fillRect(int32_t x, int32_t y, int32_t w, int32_t h, uint32_t color)
画空心圆角矩形
void drawRoundRect(int32_t x, int32_t y, int32_t w, int32_t h, int32_t radius, uint32_t color)
画实心圆角矩形
void fillRoundRect(int32_t x, int32_t y, int32_t w, int32_t h, int32_t radius, uint32_t color)
画空心三角形
void drawTriangle(int32_t x1, int32_t y1, int32_t x2, int32_t y2, int32_t x3, int32_t y3, uint32_t color)
画实心三角形
void fillTriangle(int32_t x1, int32_t y1, int32_t x2, int32_t y2, int32_t x3, int32_t y3, uint32_t color)
图片
显示BMP图片
void drawBitmap(int16_t x, int16_t y, const uint8_t *bitmap, int16_t w, int16_t h, uint16_t fgcolor)
void drawBitmap(int16_t x, int16_t y, const uint8_t *bitmap, int16_t w, int16_t h, uint16_t fgcolor, uint16_t bgcolor)
XBM
void drawXBitmap(int16_t x, int16_t y, const uint8_t *bitmap, int16_t w, int16_t h, uint16_t fgcolor)
void drawXBitmap(int16_t x, int16_t y, const uint8_t *bitmap, int16_t w, int16_t h, uint16_t fgcolor, uint16_t bgcolor)
显示图片
void pushImage(int32_t x, int32_t y, int32_t w, int32_t h, const uint16_t *data)
void pushImage(int32_t x, int32_t y, int32_t w, int32_t h, uint16_t *data)
void pushImage(int32_t x, int32_t y, int32_t w, int32_t h, const uint16_t *data, uint16_t transparent)
void pushImage(int32_t x, int32_t y, int32_t w, int32_t h, uint16_t *data, uint16_t transparent)
void pushImage(int32_t x, int32_t y, int32_t w, int32_t h, uint8_t *data, bool bpp8 = true, uint16_t *cmap = (uint16_t *)nullptr)
void pushImage(int32_t x, int32_t y, int32_t w, int32_t h, uint8_t *data, uint8_t transparent, bool bpp8 = true, uint16_t *cmap = (uint16_t *)nullptr)TFT_eSPI 库画一个带动画的矩形进度条
#include <Arduino.h>
#include <TFT_eSPI.h>
#include <SPI.h>
TFT_eSPI tft = TFT_eSPI(); // Invoke custom library
void fillSegment(int x,int y,unsigned int colour)
{
int y2 = 10;
for (int i = 0; i < +100; i++)
{
tft.fillRect(x, y, i, y2, colour);
//如果在这里加个delay会出现扇形动画
delay(20);
}
}
void setup(void)
{
tft.init();
tft.setRotation(0);
tft.fillScreen(TFT_BLACK);
}
void loop()
{
fillSegment(65, 120, TFT_RED);
tft.fillScreen(TFT_BLACK);
}4、GIF 动图转成数据
方法一
工具是下面参考链接里别的文章里面找到的
工具链接：https://pan.baidu.com/s/1f2rgD1a9PY-_hboPdbfaow
提取码：4h6h
（1）把要转换的图片放到这个工具的目录下（目录不要太深）
（2）打开电脑的运行窗口（win+R），输入“cmd”打开命令窗口
（3）在命令窗口中输入跳转命令，跳转到转换工具所在的目录下
cd C:\Users\NING MEI\Desktop\Windows
（4）运行应用程序，运行成功的话就会生成相应的头文件
格式：应用程序名+空格+图片名+空格+>+空格+转换后的文件名
image_to_c64.exe 1.jpg > image1.h
方法二
这个网址直接生成：在线图像转换器 - BMP、JPG 或 PNG 到 C 数组或二进制 |LVGL公司
5、示例代码
代码实现串口接收消息显示对应的图片
#include <SPI.h>
#include <TFT_eSPI.h>
#include <AnimatedGIF.h>
#include "1.h"
#include "gif_demo1.h"
#include "gif_demo2.h"
#include "gif_demo3.h"
#include "gif_demo4.h"
#include "gif_demo5.h"
#include <pgmspace.h>
#define GIF_DEMO0 gif_1
#define GIF_DEMO1 gif_demo1
#define GIF_DEMO2 gif_demo2
#define GIF_DEMO3 gif_demo3
#define GIF_DEMO4 gif_demo4
#define GIF_DEMO5 gif_demo5
TFT_eSPI tft = TFT_eSPI();
AnimatedGIF gif;
#define NORMAL_SPEED
#define GIF_ENABLE
#ifdef GIF_ENABLE
#define DISPLAY_WIDTH tft.width()
#define DISPLAY_HEIGHT tft.height()
#define BUFFER_SIZE 256 // 最优是 >= GIF宽度或宽度的整除
#ifdef USE_DMA
uint16_t usTemp[2][BUFFER_SIZE]; // 全局支持DMA使用
#else
uint16_t usTemp[1][BUFFER_SIZE];
#endif
bool dmaBuf = 0;
// 划线
void GIFDraw(GIFDRAW *pDraw)
{
uint8_t *s;
uint16_t *d;
uint16_t *usPalette;
int x, y, iWidth, iCount;
// 显示边界检查和裁剪
iWidth = pDraw->iWidth;
if (iWidth + pDraw->iX > DISPLAY_WIDTH)
iWidth = DISPLAY_WIDTH - pDraw->iX;
usPalette = pDraw->pPalette;
y = pDraw->iY + pDraw->y; // 当前行
if (y >= DISPLAY_HEIGHT || pDraw->iX >= DISPLAY_WIDTH || iWidth < 1)
return;
// Old image disposal
s = pDraw->pPixels;
if (pDraw->ucDisposalMethod == 2) // restore to background color
{
for (x = 0; x < iWidth; x++)
{
if (s[x] == pDraw->ucTransparent)
s[x] = pDraw->ucBackground;
}
pDraw->ucHasTransparency = 0;
}
// 将新的像素应用到主图像上
if (pDraw->ucHasTransparency) // 如果使用透明度
{
uint8_t *pEnd, c, ucTransparent = pDraw->ucTransparent;
pEnd = s + iWidth;
x = 0;
iCount = 0; // 计数非透明像素
while (x < iWidth)
{
c = ucTransparent - 1;
d = &usTemp[0][0];
while (c != ucTransparent && s < pEnd && iCount < BUFFER_SIZE) // 在寻找不透明像素时
{
c = *s++;
if (c == ucTransparent) // done, stop
{
s--; // 看作透明像素
}
else // 不透明
{
*d++ = usPalette[c];
iCount++;
}
}
if (iCount) // 不透明像素
{
// 由于线段短，DMA会降低性能
tft.setAddrWindow(pDraw->iX + x, y, iCount, 1);
tft.pushPixels(usTemp, iCount);
x += iCount;
iCount = 0;
}
// 寻找透明像素
c = ucTransparent;
while (c == ucTransparent && s < pEnd)
{
c = *s++;
if (c == ucTransparent)
x++;
else
s--;
}
}
}
else
{
s = pDraw->pPixels;
// 展开第一个通道以提高DMA性能
// 通过RGB565调色板转换8位像素(已经字节反转)
if (iWidth <= BUFFER_SIZE)
for (iCount = 0; iCount < iWidth; iCount++)
usTemp[dmaBuf][iCount] = usPalette[*s++];
else
for (iCount = 0; iCount < BUFFER_SIZE; iCount++)
usTemp[dmaBuf][iCount] = usPalette[*s++];
#ifdef USE_DMA // 71.6 fps (ST7796 84.5 fps)
tft.dmaWait();
tft.setAddrWindow(pDraw->iX, y, iWidth, 1);
tft.pushPixelsDMA(&usTemp[dmaBuf][0], iCount);
dmaBuf = !dmaBuf;
#else // 57.0 fps
tft.setAddrWindow(pDraw->iX, y, iWidth, 1);
tft.pushPixels(&usTemp[0][0], iCount);
#endif
iWidth -= iCount;
while (iWidth > 0) // 如果像素缓冲区小于宽度，则循环
{
// 通过RGB565调色板转换8位像素(已经字节反转)
if (iWidth <= BUFFER_SIZE)
for (iCount = 0; iCount < iWidth; iCount++)
usTemp[dmaBuf][iCount] = usPalette[*s++];
else
for (iCount = 0; iCount < BUFFER_SIZE; iCount++)
usTemp[dmaBuf][iCount] = usPalette[*s++];
#ifdef USE_DMA
tft.dmaWait();
tft.pushPixelsDMA(&usTemp[dmaBuf][0], iCount);
dmaBuf = !dmaBuf;
#else
tft.pushPixels(&usTemp[0][0], iCount);
#endif
iWidth -= iCount;
}
}
}
#endif
struct struct_FIG
{
String name;
int value;
};
struct_FIG FIG[] =
{
{"FIG1", 1},
{"FIG2", 2},
{"FIG3", 3},
{"FIG4", 4}};
String read_fig;
uint8_t read_value = 1;
bool flag;
void Task1code(void *pvParameters)
{
for (;;)
{
while (Serial.available() > 0)
{
char C = Serial.read();
read_fig += C;
flag = 1;
}
if (flag)
{
for (struct_FIG &single : FIG)
{
if (read_fig.equals(single.name + "\r\n"))
{
read_value = single.value;
read_fig = "";
}
}
read_fig = "";
flag = 0;
}
vTaskDelay(20 / portTICK_PERIOD_MS);
}
}
void setup()
{
Serial.begin(115200);
tft.begin();
tft.setRotation(0);
tft.fillScreen(TFT_BLACK);
gif.begin(BIG_ENDIAN_PIXELS);
analogWrite(16, 100); // 背景光
xTaskCreatePinnedToCore(Task1code, "Task1", 10000, NULL, 1, NULL, 0);
}
// 渲染速率由GIF控制
#ifdef NORMAL_SPEED
void loop()
{
if (read_value == 1)
{
#ifdef GIF_DEMO0
if (gif.open((uint8_t *)GIF_DEMO0, sizeof(GIF_DEMO0), GIFDraw))
{
Serial.printf("Successfully opened GIF; Canvas size = %d x %d", gif.getCanvasWidth(), gif.getCanvasHeight());
tft.startWrite(); // TFT芯片选择锁低
while (gif.playFrame(true, NULL))
{
yield();
}
gif.close();
tft.endWrite(); // 释放TFT芯片选择其他SPI设备
}
#endif
}
else if (read_value == 2)
{
#ifdef GIF_DEMO4
if (gif.open((uint8_t *)GIF_DEMO4, sizeof(GIF_DEMO4), GIFDraw))
{
Serial.printf("Successfully opened GIF; Canvas size = %d x %d\n", gif.getCanvasWidth(), gif.getCanvasHeight());
tft.startWrite();
while (gif.playFrame(true, NULL))
{
yield();
}
gif.close();
tft.endWrite();
}
#endif
}
else
read_value = 1;
}
// 测试最大渲染速度
#else
void loop()
{
long lTime = micros();
int iFrames = 0;
if (gif.open((uint8_t *)GIF_DEMO4, sizeof(GIF_DEMO4), GIFDraw))
{
tft.startWrite(); // TFT芯片选择锁低
while (gif.playFrame(false, NULL))
{
// 每个循环渲染一帧
iFrames++;
yield();
}
gif.close();
tft.endWrite(); // 释放TFT芯片选择其他SPI设备
lTime = micros() - lTime;
Serial.print(iFrames / (lTime / 1000000.0));
Serial.println(" fps");
}
}
#endif下面链接有别的大佬的源码。
2200
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
