【TI毫米波雷达】IWR6843AOP的CCS工程模板创建（DSS）

【TI毫米波雷达】IWR6843AOP的CCS工程模板创建（DSS）

如果还不会配置MSS 则看我的文章：
【TI毫米波雷达笔记】IWR6843AOP的CCS工程模板创建（MSS）（cannot find file “libsleep_xwr68xx.aer4f“解决方案）
大体上与MSS创建也差不多 SDK我用的3.5版本

DSS工程模板：
TI毫米波雷达IWR6843AOP的CCS工程模板（DSS）

工程创建

新建工程

在CCS里面新建工程 选择芯片 调试用设备和typical工程类型
Next之后要求选择Target和Platform，在页面下方处如下填写：

Target: ti.targets.elf.C674
Platform: ti.platforms.c6x:IWR68XX:false:600

Build-profile任意选择
建立好工程以后 在工程属性的general中也可以进行更改 只不过改到release版本以后需要重新配置各个设置

另外 在products中 点击add 添加mmwave sdk DSPLIB和sysconfig 如图所示

修改文件

这样工程就创建好了。在左侧的Project Explorer中，可以看到。接下来，我们需要对工程的属性进行调整，并覆盖一些工程自带的文件来满足开发需求。

其中 main.h 是我自己添加的
代码如下：

/*
 *  ======== main.c ========
 */

#include "main.h"



/*
 *  ======== taskFxn ========
 */
Void taskFxn(UArg a0, UArg a1)
{
    System_printf("enter taskFxn()\n");

    Task_sleep(10);

    System_printf("exit taskFxn()\n");

    System_flush(); /* force SysMin output to console */
}

/*
 *  ======== main ========
 */
Int main()
{ 
    Task_Params     taskParams;
    int32_t         errCode;
    SOC_Handle      socHandle;
    SOC_Cfg         socCfg;


    /* Initialize the SOC confiugration: */
    memset ((void *)&socCfg, 0, sizeof(SOC_Cfg));

    /* Populate the SOC configuration: */
    socCfg.clockCfg = SOC_SysClock_BYPASS_INIT;

    /* Initialize the SOC Module: This is done as soon as the application is started
     * to ensure that the MPU is correctly configured. */
    socHandle = SOC_init (&socCfg, &errCode);
    if (socHandle == NULL)
    {
        System_printf ("Error: SOC Module Initialization failed [Error code %d]\n", errCode);
        return -1;
    }

    /* Initialize the Task Parameters. */
    Task_Params_init(&taskParams);
    taskParams.stackSize = 4*1024;
    Task_create(taskFxn, &taskParams, NULL);

    /* Start BIOS */
    BIOS_start();
    return 0;
}

/*
 * main.h
 *
 *  Created on: 2023年8月14日
 *      Author: ZHOU
 */

#ifndef MAIN_H_
#define MAIN_H_

#include <stdint.h>
#include <stdlib.h>
#include <stddef.h>
#include <string.h>
#include <stdio.h>
#include <stdbool.h>
#include <math.h>

/* BIOS/XDC Include Files. */
/* SYS/BIOS所使用的头文件 */
#include <xdc/std.h>
#include <xdc/cfg/global.h>
#include <xdc/runtime/IHeap.h>
#include <xdc/runtime/System.h>
#include <xdc/runtime/Error.h>
#include <xdc/runtime/Memory.h>
#include <ti/sysbios/BIOS.h>
#include <ti/sysbios/knl/Task.h>
#include <ti/sysbios/knl/Event.h>
#include <ti/sysbios/knl/Semaphore.h>
#include <ti/sysbios/knl/Clock.h>
#include <ti/sysbios/heaps/HeapBuf.h>
#include <ti/sysbios/heaps/HeapMem.h>
#include <ti/sysbios/knl/Event.h>
#include <ti/sysbios/family/arm/v7a/Pmu.h>
#include <ti/sysbios/family/arm/v7r/vim/Hwi.h>
#include <ti/sysbios/utils/Load.h>
#include <ti/drivers/osal/MemoryP.h>

/* MMWave SDK Include Files: */
/* SDK头文件 */
#include <ti/common/sys_common.h>
#include <ti/common/MMWave_sdk_version.h>
#include <ti/drivers/soc/soc.h>
#include <ti/drivers/esm/esm.h>
#include <ti/drivers/crc/crc.h>
#include <ti/drivers/gpio/gpio.h>
#include <ti/drivers/mailbox/mailbox.h>
#include <ti/drivers/pinmux/pinmux.h>
#include <ti/drivers/adcbuf/ADCBuf.h>
#include <ti/control/MMWave/MMWave.h>
#include <ti/control/dpm/dpm.h>
#include <ti/drivers/osal/DebugP.h>
#include <ti/drivers/uart/UART.h>
#include <ti/utils/cli/cli.h>
#include <ti/utils/mathutils/mathutils.h>
#include <ti/utils/testlogger/logger.h>

/* Data path Include Files */
#include <ti/datapath/dpc/objectdetection/objdetdsp/objectdetection.h>  //dsp模式
//#include <ti/datapath/dpc/objectdetection/objdethwa/objectdetection.h>  //hwa模式

/* Demo Profiling Include Files */
#include <ti/utils/cycleprofiler/cycle_profiler.h>
#include <ti/alg/mmwavelib/mmwavelib.h>


#endif /* MAIN_H_ */

移植配置文件

1. 从 <SDK安装路径>/packages/ti/platform/xwr68xx 下，拷贝c674x_linker.cmd到工程中

2. 打开**<SDK安装路径>/packages/ti/drivers**下的任意一个驱动文件夹，这里以edma驱动为例，则打开<SDK安装路径>packages/ti/drivers/edma/test/xwr68xx，从中拷贝dss.cfg到工程中，此时工程如下
   

修改工程属性

1. Resource->Linked Resources，右侧点击New添加条目MMWAVE_SDK_DIR（名称可自定），路径定位到mmWave SDK安装路径，如下
   
   同样的方法添加
   DSPLIB_C674x_DIR
   MATHLIB_C674x_DIR
   DSPLIB_C64Px_DIR
   指向各个安装目录
2. 在XDC构建SYS/BIOS的过程中，需要让其将枚举的类型设置为int型，否则可能会导致诸如串口无法开启、控制台无法打印输出等问题，具体原理暂时不明。

Build->XDCtools->Advanced Options中，页面下方的Additional complier options，填入"--enum_type=int"，如下

一定要注意–是两个英文的横杠（减号）
3. Build->C6000 Complier->Include Options，右侧上方的搜索路径列表，点击带有绿色加号的图标添加，添加目录 ${MMWAVE_SDK_DIR}/packages
同样的 添加另外三个目录：

${DSPLIB_C674x_DIR}/packages
${MATHLIB_C674x_DIR}/packages
${DSPLIB_C64Px_DIR}/packages

4. mmWave SDK提供的库在设计的时候考虑了整个系列雷达芯片的兼容性，因此库内有多套代码，通过宏定义来区分需要使用哪一段代码进行编译。为此，我们需要向编译器的预定义符号里添加一些用来表示当前目标芯片的宏。

Build->C6000 Complier->Prodefined Symbols，右侧上方添加以下符号（直接复制下面的内容，然后点击框内原先已有的宏，按Ctrl+V即可一次性直接粘贴进去）

SOC_XWR68XX
SUBSYS_DSS
PLATFORMES2
MMWAVE_L3RAM_NUM_BANK=6
MMWAVE_SHMEM_TCMA_NUM_BANK=0
MMWAVE_SHMEM_TCMB_NUM_BANK=0
MMWAVE_SHMEM_BANK_SIZE=0x20000
DOWNLOAD_FROM_CCS
DebugP_ASSERT_ENABLED
_LITTLE_ENDIAN
OBJDET_NO_RANGE
AOP

其中 如果需要指定L3代码和MSS用的大小 则配置：

MMWAVE_L3_CODEMEM_SIZE=0x100
MMWAVE_MSSUSED_L3RAM_SIZE=0x90000

5. 此处需要更改Runtime Model Options内的选项，Build->C6000 Complier->Advanced Options，如图
   
6. 大部分驱动的函数都封装成库提供给用户了，所以需要将库文件添加到连接器的搜索路径中，否则会出现未解析符号的问题。

Build->C6000 Linker->File Search Path，上方添加如下内容（一样可以直接复制过去）

dsplib.ae64P
mathlib.ae674
libmathutils.ae674
libsoc_xwr68xx.ae674
libosal_xwr68xx.ae674
libcrc_xwr68xx.ae674
libmailbox_xwr68xx.ae674
libmmwavelink_xwr68xx.ae674
libmmwave_xwr68xx.ae674
libedma_xwr68xx.ae674
libadcbuf_xwr68xx.ae674
libcbuff_xwr68xx.ae674
libhsiheader_xwr68xx.ae674
libdpm_xwr68xx.ae674
libdpedma_hwa_xwr68xx.ae674
libmmwavealg_xwr68xx.ae674
rts6740_elf.lib

下方添加如下内容，其中MMWAVE_SDK_DIR和另外三个DIR变量和前面设定Linked Resources时添加的变量名保持一致即可。

${MMWAVE_SDK_DIR}/packages/ti/control/mmwave/lib
${MMWAVE_SDK_DIR}/packages/ti/control/mmwavelink/lib
${MMWAVE_SDK_DIR}/packages/ti/control/dpm/lib
${MMWAVE_SDK_DIR}/packages/ti/drivers/adcbuf/lib
${MMWAVE_SDK_DIR}/packages/ti/drivers/crc/lib
${MMWAVE_SDK_DIR}/packages/ti/drivers/dma/lib
${MMWAVE_SDK_DIR}/packages/ti/drivers/edma/lib
${MMWAVE_SDK_DIR}/packages/ti/drivers/esm/lib
${MMWAVE_SDK_DIR}/packages/ti/drivers/gpio/lib
${MMWAVE_SDK_DIR}/packages/ti/drivers/hwa/lib
${MMWAVE_SDK_DIR}/packages/ti/drivers/mailbox/lib
${MMWAVE_SDK_DIR}/packages/ti/drivers/osal/lib
${MMWAVE_SDK_DIR}/packages/ti/drivers/pinmux/lib
${MMWAVE_SDK_DIR}/packages/ti/drivers/soc/lib
${MMWAVE_SDK_DIR}/packages/ti/drivers/uart/lib
${MMWAVE_SDK_DIR}/packages/ti/utils/cli/lib
${MMWAVE_SDK_DIR}/packages/ti/utils/mathutils/lib
${MMWAVE_SDK_DIR}/packages/ti/datapath/dpu/rangeproc/lib
${MMWAVE_SDK_DIR}/packages/ti/datapath/dpedma/lib
${MMWAVE_SDK_DIR}/packages/ti/drivers/cbuff/lib
${MMWAVE_SDK_DIR}/packages/ti/utils/hsiheader/lib
${MMWAVE_SDK_DIR}/packages/ti/drivers/qspi/lib
${MMWAVE_SDK_DIR}/packages/ti/drivers/qspiflash/lib
${MMWAVE_SDK_DIR}/packages/ti/utils/libsleep/lib
${MMWAVE_SDK_DIR}/packages/ti/utils/testlogger/lib
${MMWAVE_SDK_DIR}/packages/ti/alg/mmwavelib/lib
${DSPLIB_C64Px_DIR}/packages/ti/dsplib/lib
${MATHLIB_C674x_DIR}/packages/ti/mathlib/lib
${DSPLIB_C674x_DIR}/packages/ti/dsplib/lib

7. 同样地，在此处也需要填入一些预定义的符号，比如c674x_linker.cmd文件中用到的几个宏的大小。

Build->C6000 Linker->Advanced Options->Command File PreProcess，上方添加

MMWAVE_L3RAM_NUM_BANK=6
MMWAVE_SHMEM_TCMA_NUM_BANK=0
MMWAVE_SHMEM_TCMB_NUM_BANK=0
MMWAVE_SHMEM_BANK_SIZE=0x20000

其中 如果需要指定L3代码和MSS用的大小 则配置：

MMWAVE_L3_CODEMEM_SIZE=0x100
MMWAVE_MSSUSED_L3RAM_SIZE=0x90000

8. 点击右下角Apply and Close，再对工程重新编译，可以看到所有错误都消失了。但仍然有一个警告，提示缺少systemHeap段定义。因此打开r4f_linker.cmd文件，手动在SECTIONS内添加：

systemHeap : {} >> L2SRAM_UMAP0 | L2SRAM_UMAP1

之后再编译就不会出现问题了。

编译

这一块不太懂的 可以看我TI-CCS笔记中关于bin文件编译的文章：

blog.csdn.net/weixin_53403301/article/details/132319924

如果要编译成最终可以烧录的bin文件 则参考文章：
【TI毫米波雷达】MSS和DSS的工程编译及bin文件生成配置（共同生成一个bin文件，以IWR6843AOP为例）
必须将DSS和MSS以及BSS链接起来才行 形成最终的一个bin文件
另外 仅MSS的工程也需要链接BSS 但不用链接DSS

同MSS文章中一样 DSS也可以将.out文件转为.bin文件
post-build配置：

"${CCS_INSTALL_ROOT}/utils/tiobj2bin/tiobj2bin" "${PROJECT_LOC}/Debug/IWR6843AOP_DSS.out" "${PROJECT_LOC}/Debug/IWR6843AOP_DSS.bin" "${CG_TOOL_ROOT}/bin/ofd6x" "${CG_TOOL_ROOT}/bin/hex6x" "${CCS_INSTALL_ROOT}/utils/tiobj2bin/mkhex4bin"

附录：结构框架

雷达基本原理叙述

雷达工作原理是上电-发送chirps-帧结束-处理-上电循环
一个Frame，首先是信号发送，比如96个chirp就顺次发出去，然后接收回来，混频滤波，ADC采样，这些都是射频模块的东西。射频完成之后，FFT，CFAR，DOA这些就是信号处理的东西。然后输出给那个结构体，就是当前帧获得的点云了。

在射频发送阶段 一个frame发送若干个chirp 也就是上图左上角
第一个绿色点为frame start 第二个绿色点为frame end
其中发送若干chirps（小三角形）
chirps的个数称为numLoops（代码中 rlFrameCfg_t结构体）
在mmwave studio上位机中 则称为 no of chirp loops

frame end 到 周期结束的时间为计算时间 称为inter frame period

frame start到循环结束的时间称为framePeriodicity（代码中 rlFrameCfg_t结构体）
在mmwave studio上位机中 则称为 Periodicity

如下图frame配置部分

在inter frame Periodicity时间内（比如这里整个周期是55ms）
就是用于计算和处理的时间 一定比55ms要小
如果chirps很多的话 那么计算时间就会减小

如果是处理点云数据 则只需要每一帧计算一次点云即可
计算出当前帧的xyz坐标和速度 以及保存时间戳

雷达天线排列位置

在工业雷达包：

C:\ti\mmwave_industrial_toolbox_4_12_0\antennas\ant_rad_patterns

路径下 有各个EVM开发板的天线排列说明
同样的 EVM手册中也有
如IWR6843AOPEVM：


其天线的间距等等位于数据手册：

芯片框架

IWR6843AOP可以分成三个主要部分及多个外设
BSS：雷达前端部分
MSS：cortex-rf4内核 主要用于控制
DSS： DSP C674内核 主要用于信号处理
外设：UART GPIO DPM HWA等

其中 大部分外设可以被MSS或DSS调用
另外 雷达前端BSS部分在SDK里由MMWave API调用

代码框架上 可以分成两个代码 MSS和DSS 两个代码同时运行 通过某些外设进行同步 协同运作

但也可以只跑一个内核 在仅MSS模式下 依旧可以调用某些用于信号处理的外设 demo代码就是如此

如下图为demo代码流程

Demo工程功能

IWR6843AOP的开箱工程是根据IWR6843AOPEVM开发板来的
该工程可以将IWR6843AOP的两个串口利用起来 实现的功能主要是两个方面：
通过115200波特率的串口配置参数 建立握手协议
通过115200*8的串口输出雷达数据
此工程需要匹配TI官方的上位机：mmWave_Demo_Visualizer_3.6.0来使用
该上位机可以在连接串口后自动化操作 并且对雷达数据可视化



关于雷达参数配置 则在SDK的mmw\profiles目录下
言简意赅 可以直接更改该目录下的文件参数来达到配置雷达参数的目的

但这种方法不利于直接更改 每次用上位机运行后的参数是固定的（上位机运行需要SDK环境） 所以也可以在代码中写死 本文探讨的就是这个方向

CCS工程导入

首先 在工业雷达包目录下找到该工程设置

C:\ti\mmwave_industrial_toolbox_4_12_0\labs\Out_Of_Box_Demo\src\xwr6843AOP

使用CCS的import project功能导入工程后 即可完成环境搭建

这里用到的SDK最新版为3.6版本

工程叙述

以下来自官方文档 可以直接跳过

Software Tasks

The demo consists of the following (SYSBIOS) tasks:

MmwDemo_initTask. This task is created/launched by main and is a one-time active task whose main functionality is to initialize drivers (<driver>_init), MMWave module (MMWave_init), DPM module (DPM_init), open UART and data path related drivers (EDMA, HWA), and create/launch the following tasks (the CLI_task is launched indirectly by calling CLI_open).
CLI_task. This command line interface task provides a simplified 'shell' interface which allows the configuration of the BSS via the mmWave interface (MMWave_config). It parses input CLI configuration commands like chirp profile and GUI configuration. When sensor start CLI command is parsed, all actions related to starting sensor and starting the processing the data path are taken. When sensor stop CLI command is parsed, all actions related to stopping the sensor and stopping the processing of the data path are taken
MmwDemo_mmWaveCtrlTask. This task is used to provide an execution context for the mmWave control, it calls in an endless loop the MMWave_execute API.
MmwDemo_DPC_ObjectDetection_dpmTask. This task is used to provide an execution context for DPM (Data Path Manager) execution, it calls in an endless loop the DPM_execute API. In this context, all of the registered object detection DPC (Data Path Chain) APIs like configuration, control and execute will take place. In this task. When the DPC's execute API produces the detected objects and other results, they are transmitted out of the UART port for display using the visualizer.

Data Path

Top Level Data Path Processing Chain

Top Level Data Path Timing

The data path processing consists of taking ADC samples as input and producing detected objects (point-cloud and other information) to be shipped out of UART port to the PC. The algorithm processing is realized using the DPM registered Object Detection DPC. The details of the processing in DPC can be seen from the following doxygen documentation:

ti/datapath/dpc/objectdetection/objdethwa/docs/doxygen/html/index.html

Output information sent to host

Output packets with the detection information are sent out every frame through the UART. Each packet consists of the header MmwDemo_output_message_header_t and the number of TLV items containing various data information with types enumerated in MmwDemo_output_message_type_e. The numerical values of the types can be found in mmw_output.h. Each TLV item consists of type, length (MmwDemo_output_message_tl_t) and payload information. The structure of the output packet is illustrated in the following figure. Since the length of the packet depends on the number of detected objects it can vary from frame to frame. The end of the packet is padded so that the total packet length is always multiple of 32 Bytes.

Output packet structure sent to UART
The following subsections describe the structure of each TLV.

List of detected objects

Type: (MMWDEMO_OUTPUT_MSG_DETECTED_POINTS)

Length: (Number of detected objects) x (size of DPIF_PointCloudCartesian_t)

Value: Array of detected objects. The information of each detected object is as per the structure DPIF_PointCloudCartesian_t. When the number of detected objects is zero, this TLV item is not sent. The maximum number of objects that can be detected in a sub-frame/frame is DPC_OBJDET_MAX_NUM_OBJECTS.

The orientation of x,y and z axes relative to the sensor is as per the following figure. (Note: The antenna arrangement in the figure is shown for standard EVM (see gAntDef_default) as an example but the figure is applicable for any antenna arrangement.)

Coordinate Geometry
The whole detected objects TLV structure is illustrated in figure below.

Detected objects TLV

Range profile

Type: (MMWDEMO_OUTPUT_MSG_RANGE_PROFILE)

Length: (Range FFT size) x (size of uint16_t)

Value: Array of profile points at 0th Doppler (stationary objects). The points represent the sum of log2 magnitudes of received antennas expressed in Q9 format.

Noise floor profile
Type: (MMWDEMO_OUTPUT_MSG_NOISE_PROFILE)

Length: (Range FFT size) x (size of uint16_t)

Value: This is the same format as range profile but the profile is at the maximum Doppler bin (maximum speed objects). In general for stationary scene, there would be no objects or clutter at maximum speed so the range profile at such speed represents the receiver noise floor.

Azimuth static heatmap

Type: (MMWDEMO_OUTPUT_MSG_AZIMUT_STATIC_HEAT_MAP)

Length: (Range FFT size) x (Number of "azimuth" virtual antennas) (size of cmplx16ImRe_t_)

Value: Array DPU_AoAProcHWA_HW_Resources::azimuthStaticHeatMap. The antenna data are complex symbols, with imaginary first and real second in the following order:

Imag(ant 0, range 0), Real(ant 0, range 0),...,Imag(ant N-1, range 0),Real(ant N-1, range 0)
         ...
         Imag(ant 0, range R-1), Real(ant 0, range R-1),...,Imag(ant N-1, range R-1),Real(ant N-1, range R-1)

Note that the number of virtual antennas is equal to the number of “azimuth” virtual antennas. The antenna symbols are arranged in the order as they occur at the input to azimuth FFT. Based on this data the static azimuth heat map could be constructed by the GUI running on the host.

Azimuth/Elevation static heatmap

Type: (MMWDEMO_OUTPUT_MSG_AZIMUT_ELEVATION_STATIC_HEAT_MAP)

Length: (Range FFT size) x (Number of all virtual antennas) (size of cmplx16ImRe_t_)

Value: Array DPU_AoAProcHWA_HW_Resources::azimuthStaticHeatMap. The antenna data are complex symbols, with imaginary first and real second in the following order:

 Imag(ant 0, range 0), Real(ant 0, range 0),...,Imag(ant N-1, range 0),Real(ant N-1, range 0)
         ...
         Imag(ant 0, range R-1), Real(ant 0, range R-1),...,Imag(ant N-1, range R-1),Real(ant N-1, range R-1)

Note that the number of virtual antennas is equal to the total number of active virtual antennas. The antenna symbols are arranged in the order as they occur in the radar cube matrix. This TLV is sent by AOP version of MMW demo, that uses AOA2D DPU. Based on this data the static azimuth or elevation heat map could be constructed by the GUI running on the host.

Range/Doppler heatmap

Type: (MMWDEMO_OUTPUT_MSG_RANGE_DOPPLER_HEAT_MAP)

Length: (Range FFT size) x (Doppler FFT size) (size of uint16_t)

Value: Detection matrix DPIF_DetMatrix::data. The order is :

 X(range bin 0, Doppler bin 0),...,X(range bin 0, Doppler bin D-1),
        ...
        X(range bin R-1, Doppler bin 0),...,X(range bin R-1, Doppler bin D-1)

Stats information

Type: (MMWDEMO_OUTPUT_MSG_STATS )

Length: (size of MmwDemo_output_message_stats_t)

Value: Timing information as per MmwDemo_output_message_stats_t. See timing diagram below related to the stats.

Processing timing

Note:

The MmwDemo_output_message_stats_t::interChirpProcessingMargin is not computed (it is always set to 0). This is because there is no CPU involvement in the 1D processing (only HWA and EDMA are involved), and it is not possible to know how much margin is there in chirp processing without CPU being notified at every chirp when processing begins (chirp event) and when the HWA-EDMA computation ends. The CPU is intentionally kept free during 1D processing because a real application may use this time for doing some post-processing algorithm execution.
While the MmwDemo_output_message_stats_t::interFrameProcessingTime reported will be of the current sub-frame/frame, the MmwDemo_output_message_stats_t::interFrameProcessingMargin and MmwDemo_output_message_stats_t::transmitOutputTime will be of the previous sub-frame (of the same MmwDemo_output_message_header_t::subFrameNumber as that of the current sub-frame) or of the previous frame.
The MmwDemo_output_message_stats_t::interFrameProcessingMargin excludes the UART transmission time (available as MmwDemo_output_message_stats_t::transmitOutputTime). This is done intentionally to inform the user of a genuine inter-frame processing margin without being influenced by a slow transport like UART, this transport time can be significantly longer for example when streaming out debug information like heat maps. Also, in a real product deployment, higher speed interfaces (e.g LVDS) are likely to be used instead of UART. User can calculate the margin that includes transport overhead (say to determine the max frame rate that a particular demo configuration will allow) using the stats because they also contain the UART transmission time.

The CLI command “guMonitor” specifies which TLV element will be sent out within the output packet. The arguments of the CLI command are stored in the structure MmwDemo_GuiMonSel_t.

Side information of detected objects

Type: (MMWDEMO_OUTPUT_MSG_DETECTED_POINTS_SIDE_INFO)

Length: (Number of detected objects) x (size of DPIF_PointCloudSideInfo_t)

Value: Array of detected objects side information. The side information of each detected object is as per the structure DPIF_PointCloudSideInfo_t). When the number of detected objects is zero, this TLV item is not sent.

Temperature Stats

Type: (MMWDEMO_OUTPUT_MSG_TEMPERATURE_STATS)

Length: (size of MmwDemo_temperatureStats_t)

Value: Structure of detailed temperature report as obtained from Radar front end. MmwDemo_temperatureStats_t::tempReportValid is set to return value of rlRfGetTemperatureReport. If MmwDemo_temperatureStats_t::tempReportValid is 0, values in MmwDemo_temperatureStats_t::temperatureReport are valid else they should be ignored. This TLV is sent along with Stats TLV described in Stats information

Range Bias and Rx Channel Gain/Phase Measurement and Compensation

Because of imperfections in antenna layouts on the board, RF delays in SOC, etc, there is need to calibrate the sensor to compensate for bias in the range estimation and receive channel gain and phase imperfections. The following figure illustrates the calibration procedure.

Calibration procedure ladder diagram

The calibration procedure includes the following steps:

Set a strong target like corner reflector at the distance of X meter (X less than 50 cm is not recommended) at boresight.
Set the following command in the configuration profile in .../profiles/profile_calibration.cfg, to reflect the position X as follows: where D (in meters) is the distance of window around X where the peak will be searched. The purpose of the search window is to allow the test environment from not being overly constrained say because it may not be possible to clear it of all reflectors that may be stronger than the one used for calibration. The window size is recommended to be at least the distance equivalent of a few range bins. One range bin for the calibration profile (profile_calibration.cfg) is about 5 cm. The first argument "1" is to enable the measurement. The stated configuration profile (.cfg) must be used otherwise the calibration may not work as expected (this profile ensures all transmit and receive antennas are engaged among other things needed for calibration).
   measureRangeBiasAndRxChanPhase 1 X D
Start the sensor with the configuration file.
In the configuration file, the measurement is enabled because of which the DPC will be configured to perform the measurement and generate the measurement result (DPU_AoAProc_compRxChannelBiasCfg_t) in its result structure (DPC_ObjectDetection_ExecuteResult_t::compRxChanBiasMeasurement), the measurement results are written out on the CLI port (MmwDemo_measurementResultOutput) in the format below: For details of how DPC performs the measurement, see the DPC documentation.
   compRangeBiasAndRxChanPhase <rangeBias> <Re(0,0)> <Im(0,0)> <Re(0,1)> <Im(0,1)> ... <Re(0,R-1)> <Im(0,R-1)> <Re(1,0)> <Im(1,0)> ... <Re(T-1,R-1)> <Im(T-1,R-1)>
The command printed out on the CLI now can be copied and pasted in any configuration file for correction purposes. This configuration will be passed to the DPC for the purpose of applying compensation during angle computation, the details of this can be seen in the DPC documentation. If compensation is not desired, the following command should be given (depending on the EVM and antenna arrangement) Above sets the range bias to 0 and the phase coefficients to unity so that there is no correction. Note the two commands must always be given in any configuration file, typically the measure commmand will be disabled when the correction command is the desired one.
   For ISK EVM:
   compRangeBiasAndRxChanPhase 0.0   1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 
   For AOP EVM
   compRangeBiasAndRxChanPhase 0.0   1 0 -1 0 1 0 -1 0 1 0 -1 0 1 0 -1 0 1 0 -1 0 1 0 -1 0 

Streaming data over LVDS

The LVDS streaming feature enables the streaming of HW data (a combination of ADC/CP/CQ data) and/or user specific SW data through LVDS interface. The streaming is done mostly by the CBUFF and EDMA peripherals with minimal CPU intervention. The streaming is configured through the MmwDemo_LvdsStreamCfg_t CLI command which allows control of HSI header, enable/disable of HW and SW data and data format choice for the HW data. The choices for data formats for HW data are:

MMW_DEMO_LVDS_STREAM_CFG_DATAFMT_DISABLED
MMW_DEMO_LVDS_STREAM_CFG_DATAFMT_ADC
MMW_DEMO_LVDS_STREAM_CFG_DATAFMT_CP_ADC_CQ
In order to see the high-level data format details corresponding to the above data format configurations, refer to the corresponding slides in ti\drivers\cbuff\docs\CBUFF_Transfers.pptx

When HW data LVDS streaming is enabled, the ADC/CP/CQ data is streamed per chirp on every chirp event. When SW data streaming is enabled, it is streamed during inter-frame period after the list of detected objects for that frame is computed. The SW data streamed every frame/sub-frame is composed of the following in time:

HSI header (HSIHeader_t): refer to HSI module for details.
User data header: MmwDemo_LVDSUserDataHeader
User data payloads:
Point-cloud information as a list : DPIF_PointCloudCartesian_t x number of detected objects
Point-cloud side information as a list : DPIF_PointCloudSideInfo_t x number of detected objects

The format of the SW data streamed is shown in the following figure:

LVDS SW Data format

Note:

Only single-chirp formats are allowed, multi-chirp is not supported.
When number of objects detected in frame/sub-frame is 0, there is no transmission beyond the user data header.
For HW data, the inter-chirp duration should be sufficient to stream out the desired amount of data. For example, if the HW data-format is ADC and HSI header is enabled, then the total amount of data generated per chirp is:
(numAdcSamples * numRxChannels * 4 (size of complex sample) + 52 [sizeof(HSIDataCardHeader_t) + sizeof(HSISDKHeader_t)] ) rounded up to multiples of 256 [=sizeof(HSIHeader_t)] bytes.
The chirp time Tc in us = idle time + ramp end time in the profile configuration. For n-lane LVDS with each lane at a maximum of B Mbps,
maximum number of bytes that can be send per chirp = Tc * n * B / 8 which should be greater than the total amount of data generated per chirp i.e
Tc * n * B / 8 >= round-up(numAdcSamples * numRxChannels * 4 + 52, 256).
E.g if n = 2, B = 600 Mbps, idle time = 7 us, ramp end time = 44 us, numAdcSamples = 512, numRxChannels = 4, then 7650 >= 8448 is violated so this configuration will not work. If the idle-time is doubled in the above example, then we have 8700 > 8448, so this configuration will work.
For SW data, the number of bytes to transmit each sub-frame/frame is:
52 [sizeof(HSIDataCardHeader_t) + sizeof(HSISDKHeader_t)] + sizeof(MmwDemo_LVDSUserDataHeader_t) [=8] +
number of detected objects (Nd) * { sizeof(DPIF_PointCloudCartesian_t) [=16] + sizeof(DPIF_PointCloudSideInfo_t) [=4] } rounded up to multiples of 256 [=sizeof(HSIHeader_t)] bytes.
or X = round-up(60 + Nd * 20, 256). So the time to transmit this data will be
X * 8 / (n*B) us. The maximum number of objects (Ndmax) that can be detected is defined in the DPC (DPC_OBJDET_MAX_NUM_OBJECTS). So if Ndmax = 500, then time to transmit SW data is 68 us. Because we parallelize this transmission with the much slower UART transmission, and because UART transmission is also sending at least the same amount of information as the LVDS, the LVDS transmission time will not add any burdens on the processing budget beyond the overhead of reconfiguring and activating the CBUFF session (this overhead is likely bigger than the time to transmit).
The total amount of data to be transmitted in a HW or SW packet must be greater than the minimum required by CBUFF, which is 64 bytes or 32 CBUFF Units (this is the definition CBUFF_MIN_TRANSFER_SIZE_CBUFF_UNITS in the CBUFF driver implementation). If this threshold condition is violated, the CBUFF driver will return an error during configuration and the demo will generate a fatal exception as a result. When HSI header is enabled, the total transfer size is ensured to be at least 256 bytes, which satisfies the minimum. If HSI header is disabled, for the HW session, this means that numAdcSamples * numRxChannels * 4 >= 64. Although mmwavelink allows minimum number of ADC samples to be 2, the demo is supported for numAdcSamples >= 64. So HSI header is not required to be enabled for HW only case. But if SW session is enabled, without the HSI header, the bytes in each packet will be 8 + Nd * 20. So for frames/sub-frames where Nd < 3, the demo will generate exception. Therefore HSI header must be enabled if SW is enabled, this is checked in the CLI command validation.

Implementation Notes

The LVDS implementation is mostly present in mmw_lvds_stream.h and mmw_lvds_stream.c with calls in mss_main.c. Additionally HSI clock initialization is done at first time sensor start using MmwDemo_mssSetHsiClk.
EDMA channel resources for CBUFF/LVDS are in the global resource file (mmw_res.h, see Hardware Resource Allocation) along with other EDMA resource allocation. The user data header and two user payloads are configured as three user buffers in the CBUFF driver. Hence SW allocation for EDMA provides for three sets of EDMA resources as seen in the SW part (swSessionEDMAChannelTable[.]) of MmwDemo_LVDSStream_EDMAInit. The maximum number of HW EDMA resources are needed for the data-format MMW_DEMO_LVDS_STREAM_CFG_DATAFMT_CP_ADC_CQ, which as seen in the corresponding slide in ti\drivers\cbuff\docs\CBUFF_Transfers.pptx is 12 channels (+ shadows) including the 1st special CBUFF EDMA event channel which CBUFF IP generates to the EDMA, hence the HW part (hwwSessionEDMAChannelTable[.]) of MmwDemo_LVDSStream_EDMAInit has 11 table entries.
Although the CBUFF driver is configured for two sessions (hw and sw), at any time only one can be active. So depending on the LVDS CLI configuration and whether advanced frame or not, there is logic to activate/deactivate HW and SW sessions as necessary.
The CBUFF session (HW/SW) configure-create and delete depends on whether or not re-configuration is required after the first time configuration.
For HW session, re-configuration is done during sub-frame switching to re-configure for the next sub-frame but when there is no advanced frame (number of sub-frames = 1), the HW configuration does not need to change so HW session does not need to be re-created.
For SW session, even though the user buffer start addresses and sizes of headers remains same, the number of detected objects which determines the sizes of some user buffers changes from one sub-frame/frame to another sub-frame/frame. Therefore SW session needs to be recreated every sub-frame/frame.
User may modify the application software to transmit different information than point-cloud in the SW data e.g radar cube data (output of range DPU). However the CBUFF also has a maximum link list entry size limit of 0x3FFF CBUFF units or 32766 bytes. This means it is the limit for each user buffer entry [there are maximum of 3 entries -1st used for user data header, 2nd for point-cloud and 3rd for point-cloud side information]. During session creation, if this limit is exceeded, the CBUFF will return an error (and demo will in turn generate an exception). A single physical buffer of say size 50000 bytes may be split across two user buffers by providing one user buffer with (address, size) = (start address, 25000) and 2nd user buffer with (address, size) = (start address + 25000, 25000), beyond this two (or three if user data header is also replaced) limit, the user will need to create and activate (and wait for completion) the SW session multiple times to accomplish the transmission.

The following figure shows a timing diagram for the LVDS streaming (the figure is not to scale as actual durations will vary based on configuration).

How to bypass CLI

Re-implement the file mmw_cli.c as follows:

MmwDemo_CLIInit should just create a task with input taskPriority. Lets say the task is called "MmwDemo_sensorConfig_task".
All other functions are not needed
Implement the MmwDemo_sensorConfig_task as follows:
Fill gMmwMCB.cfg.openCfg
Fill gMmwMCB.cfg.ctrlCfg
Add profiles and chirps using MMWave_addProfile and MMWave_addChirp functions
Call MmwDemo_CfgUpdate for every offset in Offsets for storing CLI configuration (MMWDEMO_xxx_OFFSET in mmw.h)
Fill gMmwMCB.dataPathObj.objDetCommonCfg.preStartCommonCfg
Call MmwDemo_openSensor
Call MmwDemo_startSensor (One can use helper function MmwDemo_isAllCfgInPendingState to know if all dynamic config was provided)

Hardware Resource Allocation

The Object Detection DPC needs to configure the DPUs hardware resources (HWA, EDMA). Even though the hardware resources currently are only required to be allocated for this one and only DPC in the system, the resource partitioning is shown to be in the ownership of the demo. This is to illustrate the general case of resource allocation across more than one DPCs and/or demo's own processing that is post-DPC processing. This partitioning can be seen in the mmw_res.h file. This file is passed as a compiler command line define

"--define=APP_RESOURCE_FILE="<ti/demo/xwr64xx/mmw/mmw_res.h>" 

in mmw.mak when building the DPC sources as part of building the demo application and is referred in object detection DPC sources where needed as

#include APP_RESOURCE_FILE