cadence16.3 DRC错误

cadence 16.3

不小心点击了一个元件，右键选择edit part，关闭时提示update，于是update，结果DRC时出现错误：

ERROR:  [DRC0026]  This reference has already been assigned to a different package type.

 

网上找到解决办法：（简单来说，就是在design的cache里选中刚修改过的元件封装，右键选replace cache就解决了）

DRC0026 error regarding part reference and package type

PROBLEM:

When I run a DRC, I get the following error: Checking for Invalid References

DRC0026: This reference has already been assigned to a different package type.

What could cause this error?

SOLUTION:

If one part in a multi-packaged device is edited on the schematic, then this would cause a packaging problem. A new, unique part will be created in the design cache. Packaged parts should be edited in the library(file\open\library). If there are duplicate parts in the design cache, or similar part names with an underscore appended to the name(AND2_0)in the cache, then you should do design\replace cache to update the duplicate parts from the original library. This should get rid of the duplicate parts. Refer to the following KB entry for
a summary of design cache management:


Also, duplicate references can cause a DRC0026 error. drc0026, drc, package type, part reference

Document number: CAP03096
Applies to: Capture ver. 9.2, 9.1, 9.0; Capture, CIS
Created on: 05/17/01
Last modified: 05/17/01

Copyright © 2005, Cadence Design Systems, Inc.
All rights reserved.