依次执行下面的SPI命令
config_cmd={1’b1,10’h273,lo_txfrac[7:0]}; // Write TX Synth Fractional Freq Word[7:0]
config_cmd={1’b1,10’h274,lo_txfrac[15:8]}; // Write TX Synth Fractional Freq Word[15:8]
config_cmd={1’b1,10’h275,lo_txfrac[23:16]}; // Write TX Synth Fractional Freq Word[22:16]
config_cmd={1’b1,10’h272,lo_txint[15:8]}; // Write TX Synth Integer Freq Word[10:8]
config_cmd={1’b1,10’h271,lo_txint[7:0]}; // Write TX Synth Integer Freq Word[7:0] (starts VCO CAL)
config_cmd={1’b1,10’h005,lo_txdiv,lo_rxdiv}; // Set LO divider setting
AD9361如何设置发射频率
于 2023-11-24 22:41:38 首次发布