12.22练习

最新推荐文章于 2024-08-10 21:00:00 发布

喵~( •̀ ω •́ )~

最新推荐文章于 2024-08-10 21:00:00 发布

阅读量63

点赞数

文章标签：单片机嵌入式硬件

本文链接：https://blog.csdn.net/yj1876817/article/details/128411361

版权

1、依次点亮LED1,2,3

.text
.global _start
_start:

LED1_INIT:
	/*LED1*/
	@1. 使能GPIOE控制起的时钟 RCC_MP_AHB4ENSETR[4] = 0b1   0x50000A28
	ldr r0, =0x50000A28   @ 准备地址
	ldr r1, [r0]          @ 读取地址中的数据
	orr r1, r1, #(0x1 << 4)  @ 设置第4位置1
	str r1, [r0]          @ 修改的数据写到地址中

	@2. 设置PE10引脚为输出模式 GPIOE_MODER[21:20] = 0b01      0x50006000
	ldr r0, =0x50006000
	ldr r1, [r0]
	and r1, r1, #(~(0x3 << 20))
	orr r1, r1, #(0x1 << 20)
	str r1, [r0]

	@3. 设置PE10引脚为推挽输出 GPIOE_OTYPER[10] = 0b0         0x50006004
	ldr r0, =0x50006004
	ldr r1, [r0]
	bic r1, r1, #(0x1 << 10)
	str r1, [r0]

	@4. 设置PE10引脚速度为低速 GPIOE_OSPEEDR[21:20] = 0b00    0x50006008
	ldr r0, =0x50006008
	ldr r1, [r0]
	bic r1, r1, #(0x3 << 20)
	str r1, [r0]

	@5. 设置PE10引脚禁止上拉和下拉电阻 GPIOE_PUPDR[21:20] = 0b00      0x5000600C
	ldr r0, =0x5000600C
	ldr r1, [r0]
	bic r1, r1, #(0x3 << 20)
	str r1, [r0]
 
	@LED2
	ldr r0, =0x50000A28   @ 准备地址 
	ldr r1, [r0]          @ 读取地址中的数据
	orr r1, r1, #(0x1 << 5)  @ 设置第5位置1 
	str r1, [r0]          @ 修改的数据写到地址中

	ldr r0, =0x50007000
	ldr r1, [r0]
	and r1, r1, #(0x00 << 20)
	orr r1, r1, #(0x1 << 20)  
	str r1, [r0]

	ldr r0, =0x50007004
	ldr r1, [r0]
	and r1, r1, #(0x0 << 10)
	str r1, [r0]

	ldr r0, =0x50007008   
	ldr r1, [r0]         
	and r1, r1, #(0x00 << 20)  
	str r1, [r0]        

	ldr r0, =0x5000700c  
	ldr r1, [r0]         
	and r1, r1, #(0x00 << 20) 
	str r1, [r0]         

	@LED3
	@1. 使能GPIOE控制起的时钟 RCC_MP_AHB4ENSETR[4] = 0b1   0x50000A28
	ldr r0, =0x50000A28   @ 准备地址
	ldr r1, [r0]          @ 读取地址中的数据
	orr r1, r1, #(0x1 << 4)  @ 设置第4位置1
	str r1, [r0]          @ 修改的数据写到地址中

	@2. 设置PE10引脚为输出模式 GPIOE_MODER[21:20] = 0b01      0x50006000
	ldr r0, =0x50006000
	ldr r1, [r0]
	and r1, r1, #(~(0x3 << 16))
	orr r1, r1, #(0x1 << 16)
	str r1, [r0]

	@3. 设置PE10引脚为推挽输出 GPIOE_OTYPER[10] = 0b0         0x50006004
	ldr r0, =0x50006004
	ldr r1, [r0]
	bic r1, r1, #(0x1 << 8)
	str r1, [r0]

	@4. 设置PE10引脚速度为低速 GPIOE_OSPEEDR[21:20] = 0b00    0x50006008
	ldr r0, =0x50006008
	ldr r1, [r0]
	bic r1, r1, #(0x3 << 16)
	str r1, [r0]

	@5. 设置PE10引脚禁止上拉和下拉电阻 GPIOE_PUPDR[21:20] = 0b00      0x5000600C
	ldr r0, =0x5000600C
	ldr r1, [r0]
	bic r1, r1, #(0x3 << 16)
	str r1, [r0]


loop:
	bl LED1_ON     @ 点亮LED1灯
	bl delay_1s    @ 延时1s
	bl LED2_ON     @ 点亮LED2灯
	bl delay_1s    @ 延时1s
	bl LED3_ON     @ 点亮LED3灯
	bl delay_1s    @ 延时1s
	bl LED1_OFF    @ 熄灭LED1灯
	bl delay_1s    @ 延时1s
	bl LED2_OFF    @ 熄灭LED2灯
	bl delay_1s    @ 延时1s
	bl LED3_OFF    @ 熄灭LED3灯
	bl delay_1s    @ 延时1s
	b loop

LED1_ON:
	@设置PE10引脚输出高电平 GPIOE_ODR[10] = 0b1   0x50006014
	ldr r0, =0x50006014
	ldr r1, [r0]
	orr r1, r1, #(0x1 << 10)
	str r1, [r0]
	mov pc, lr

LED1_OFF:
	@设置PE10引脚输出低电平 GPIOE_ODR[10] = 0b0   0x50006014
	ldr r0, =0x50006014
	ldr r1, [r0]
	bic r1, r1, #(0x1 << 10)
	str r1, [r0]
	mov pc, lr

LED2_ON:
	@设置PF10引脚输出高电平 GPIOE_ODR[10] = 0b1   0x50006014
	ldr r0, =0x50007014   @ 准备地址 
	ldr r1, [r0]          @ 读取地址中的数据
	orr r1, r1, #(0x1 << 10)  @ 设置第4位置1 
	str r1, [r0]          @ 修改的数据写到地址中
	mov pc, lr

LED2_OFF:
	@设置PF10引脚输出低电平 GPIOE_ODR[10] = 0b0   0x50006014
	ldr r0, =0x50007014   @ 准备地址 
	ldr r1, [r0]          @ 读取地址中的数据
	and r1, r1, #(0x0 << 10)  @ 设置第4位置1 
	str r1, [r0]          @ 修改的数据写到地址中
	mov pc, lr


LED3_ON:
	@设置PE10引脚输出高电平 GPIOE_ODR[10] = 0b1   0x50006014
	ldr r0, =0x50006014
	ldr r1, [r0]
	orr r1, r1, #(0x1 << 8)
	str r1, [r0]
	mov pc, lr

LED3_OFF:
	@设置PE10引脚输出低电平 GPIOE_ODR[10] = 0b0   0x50006014
	ldr r0, =0x50006014
	ldr r1, [r0]
	bic r1, r1, #(0x1 << 8)
	str r1, [r0]
	mov pc, lr

@ 大概1s的延时函数
delay_1s:
	mov r3, #0x10000000
	mm:
	cmp r3, #0
	subne r3, r3, #1
	bne mm
	mov pc, lr

.end