STM32 GPIO中断PB6 PB7 PB8只能检测到中断PB8问题

    EXTI_ClearITPendingBit(EXTI_Line6|EXTI_Line7|EXTI_Line8);

    //选择中断管脚PA.5/6/7
    GPIO_EXTILineConfig(GPIO_PortSourceGPIOB, GPIO_PinSource6|GPIO_PinSource7|GPIO_PinSource8);

    EXTI_InitStructure.EXTI_Line = EXTI_Line6|EXTI_Line7|EXTI_Line8;     //选择中断线路
    EXTI_InitStructure.EXTI_Mode = EXTI_Mode_Interrupt;                  //设置为中断请求，非事件请求
    EXTI_InitStructure.EXTI_Trigger = EXTI_Trigger_Rising_Falling;       //设置中断触发方式为双边沿触发
    EXTI_InitStructure.EXTI_LineCmd = ENABLE;                            //外部中断使能
    EXTI_Init(&EXTI_InitStructure);

PB6 PB7 PB8程序这样写的时候，发现只有PB8的中断能够检测到，PB6和PB7检测不到，后来参考网友的说法改成如下，发现中断PB6和PB7能够检测到了

        GPIO_EXTILineConfig(GPIO_PortSourceGPIOB, GPIO_PinSource6);
        EXTI_InitStructure.EXTI_Line = EXTI_Line6;
        EXTI_InitStructure.EXTI_Mode = EXTI_Mode_Interrupt;
        EXTI_InitStructure.EXTI_Trigger = EXTI_Trigger_Rising; 
        EXTI_InitStructure.EXTI_LineCmd = ENABLE;
        EXTI_Init(&EXTI_InitStructure);
       
        GPIO_EXTILineConfig(GPIO_PortSourceGPIOB, GPIO_PinSource7);
        EXTI_InitStructure.EXTI_Line = EXTI_Line7;
        EXTI_InitStructure.EXTI_Mode = EXTI_Mode_Interrupt;
        EXTI_InitStructure.EXTI_Trigger = EXTI_Trigger_Rising; 
        EXTI_InitStructure.EXTI_LineCmd = ENABLE;
        EXTI_Init(&EXTI_InitStructure);
       
        GPIO_EXTILineConfig(GPIO_PortSourceGPIOB, GPIO_PinSource8);
        EXTI_InitStructure.EXTI_Line = EXTI_Line8;
        EXTI_InitStructure.EXTI_Mode = EXTI_Mode_Interrupt;
        EXTI_InitStructure.EXTI_Trigger = EXTI_Trigger_Rising; 
        EXTI_InitStructure.EXTI_LineCmd = ENABLE;
        EXTI_Init(&EXTI_InitStructure);