CVPR2021-rebuttal模板要求

INTRODUCTION

After receiving paper reviews, authors may optionally submitarebuttaltoaddressthereviewers’comments, which will be limited to a one page PDF file. Please follow the
steps and style guidelines outlined below for submitting your author response.

Note that the author rebuttal is optional and, following similar guidelines to previous CVPR conferences, it is meant to provide you with an opportunity to rebut factual errors or to supply additional information requested by the reviewers.

It is NOT intended to add new contributions (theorems, algorithms, experiments) that were not included in the original submission. You may optionally add a figure, graph or proof to your rebuttal to better illustrate your answer to the reviewers’ comments.

Per a passed 2018 PAMI-TC motion, reviewers should not request additional experiments for the rebuttal, or penalize authors for lack of additional experiments. This includes any experiments that involve running code, e.g., to
create tables or figures with new results.

Authors should not include new experimental results in the rebuttal, and reviewers should discount any such results when making their final recommendation.

Authors may include figures with illustrations or comparison tables of results reported in the submission/supplemental material or in other papers.

There buttal must adheretothesameblind-submissionas the original submission and must comply with this rebuttal-formatted template.

 

在收到论文评论后，作者可以选择提交评论，只限于一页的PDF文件。请遵循

下面列出了提交作者回复的步骤和样式指南。

请注意，作者反驳是可选的，并遵循类似的指导方针，以前的CVPR会议，它是为了给你一个机会反驳事实错误或提供额外的信息要求的评论员。
它并不打算增加新的贡献（定理，算法，实验）没有包括在原来的提交。
你可以选择添加一个数字，图表或证明你的反驳，以更好地说明你的答案，评审的意见。

根据通过的2018年PAMI-TC动议，评审员不应要求额外的实验进行反驳，或因缺乏额外实验而处罚作者。
这包括任何涉及运行代码的实验，例如创建具有新结果的表格或图形。

作者不应该在反驳中加入新的实验结果，而评论者在提出最终建议时应该对任何这样的结果予以打折。

作者可在提交材料/补充材料或其他论文中提供带插图的图表或结果对照表。

buttal必须遵守与原始提交文件相同的盲提交文件，并且必须遵守此反驳格式模板。

 

Response length

Author responses must be no longer than1page in length including any references and figures.
Overlength responses will simply not be reviewed.
This includes responses where the margins and formatting are deemed to have been significantly altered from those laid down by this style guide.
Note that this LATEX guide already sets figure captions and references in a smaller font.

作者的回复不得超过1页，包括任何参考资料和数字。

超长的答复根本不会被审查。

这包括页边空白和格式被认为与本样式指南中规定的内容有重大改变的回复。

请注意，本指南已将图形标题和引用设置为较小的字体。

 

Formatting your Response

Make sure to update the paper title and paper ID in the appropriate place in the tex file.

确保在tex文件的适当位置更新论文标题和论文ID。

All text must be in a two-column format. The total allowable width of the text area is 67 8inches (17.5 cm) wide by 87 8inches (22.54 cm) high. Columns are to be 31 4inches (8.25 cm) wide, with a 516inch (0.8 cm) space between them.

The top margin should begin 1.0 inch (2.54 cm) from the top edge of the page.

The bottom margin should be 1-1/8 inches (2.86 cm) from the bottom edge of the page。

所有文本必须采用两列格式。文本区域的总允许宽度为67 8英寸（17.5厘米）宽x 87 8英寸（22.54厘米）高。立柱宽度为314英寸（8.25cm），立柱之间的间距为516英寸（0.8cm）。
上边距应从页面上边缘开始1.0英寸（2.54厘米）。
底边距页面底边1-1/8英寸（2.86厘米）

 

 

Figure 1. Example of caption. It is set in Roman so that mathematics (always set in Roman: B sinA = AsinB) may be included without an ugly clash.

图1。标题示例。它是用罗马字母设置的，这样数学（总是用罗马字母设置：B sinA=AsinB）就可以包含在内，而不会产生难看的冲突。

for 8.5 × 11-inch paper; for A4 paper, approximately 1-5/8 inches (4.13 cm) from the bottom edge of the page.

Please number all of your sections and any displayed equations.
It is important for readers to be able to refer to any particular equation.
Wherever Times is specified, Times Roman may also be used.
Main text should be in 10-point Times, single-spaced.
Section headings should be in 10 or 12 point Times.
All paragraphs should be indented 1 pica (approx. 1/6 inch or 0.422 cm).
Figure and table captions should be 9-point Roman type as in Figure 1.
List and number all bibliographical references in 9-point Times, single-spaced, at the end of your response.
When referenced in the text, enclose the citation number in square brackets, for example [1].
Where appropriate, include the name(s) of editors of referenced books.

请给你所有的部分和任何显示的方程式编号。

对于读者来说，能够参考任何特定的方程式是很重要的。

凡是规定了时间的地方，也可以使用Times Roman。

主文本应在10点的时间，单间距。

节标题应在10或12点倍。

所有段落应缩进1 pica（约1/6英寸或0.422厘米）。

图形和表格标题应为9点罗马字体，如图1所示。

在你的回答结束时，列出所有参考书目并编号，以9点为单位，单间隔。

在文中引用时，请将引文编号括在方括号内，例如[1]。

在适当的情况下，包括参考书编辑的姓名。

 

2.1. Illustrations, graphs, and photographs

All graphics should be centered. Please ensure that any point you wish to make is resolvable in a printed copy of the response.
Resize fonts in figures to match the font in the body text, and choose line widths which render effectively inprint.
Manyreaders(andreviewers), evenofanelectronic copy, will choose to print your response in order to read it.
You cannot insist that they do otherwise, and therefore must not assume that they can zoom in to see tiny details on a graphic.
When placing figures in LATEX, it’s almost always best to use \includegraphics, and to specify the figure width as a multiple of the line width as in the example below

\usepackage[dvips]{graphicx} ...
\includegraphics[width=0.8\linewidth]
{myfile.eps}

 

所有图形应居中。请确保您希望提出的任何问题都可以在答复的打印副本中解决。

调整图形中字体的大小，使其与正文中的字体相匹配，并选择能有效显示inprint的线宽。

许多读者（andreviewers），即使是电子版，也会选择打印你的回复以便阅读。

你不能坚持他们不这样做，因此不能假设他们可以放大看到一个图形上的微小细节。

在LATEX中放置图形时，最好使用\includegraphics，并将图形宽度指定为线宽的倍数，如下例所示