如何初始化DMA加DAC

最新推荐文章于 2024-06-10 21:37:54 发布

风停了123

最新推荐文章于 2024-06-10 21:37:54 发布

阅读量225

点赞数 9

文章标签：单片机嵌入式硬件 c语言

本文链接：https://blog.csdn.net/2301_79036162/article/details/139245460

版权

void Init_DAC_PA4(void)
{
	GPIO_InitTypeDef GPIO_InitStructure;
	DAC_InitTypeDef DAC_InitStructure;
	GPIO_InitStructure.GPIO_Pin =  GPIO_Pin_4 ;
	GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AIN;
	GPIO_Init(GPIOA, &GPIO_InitStructure);

	/* DAC Periph clock enable */
	RCC_APB1PeriphClockCmd(RCC_APB1Periph_DAC, ENABLE);
	/* DAC channel1 Configuration */
	DAC_InitStructure.DAC_Trigger = DAC_Trigger_T6_TRGO;
	DAC_InitStructure.DAC_WaveGeneration = DAC_WaveGeneration_None;
	DAC_InitStructure.DAC_LFSRUnmask_TriangleAmplitude = DAC_LFSRUnmask_Bit0;
	DAC_InitStructure.DAC_OutputBuffer = DAC_OutputBuffer_Enable;
	DAC_Init(DAC_Channel_1, &DAC_InitStructure);

	DAC_Cmd(DAC_Channel_1, ENABLE);
	DAC_DMACmd(DAC_Channel_1, ENABLE);
	DAC->DHR12R1 = falling0[0];

}

void InitTimer6_1(uint16_t Per)
{
	TIM_TimeBaseInitTypeDef Timer6;

	RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM6, ENABLE);
	TIM_TimeBaseStructInit(&Timer6);
	Timer6.TIM_Period = Per;
	Timer6.TIM_Prescaler = 0;
	Timer6.TIM_ClockDivision = TIM_CKD_DIV1;
	Timer6.TIM_CounterMode = TIM_CounterMode_Up;
	Timer6.TIM_RepetitionCounter = 0x0000;
	TIM_TimeBaseInit(TIM6, &Timer6);
	TIM_SelectOutputTrigger(TIM6, TIM_TRGOSource_Update);
	TIM_Cmd(TIM6, DISABLE);
}

void Init_Analog_Output(void)
{
	Init_DAC_PA4();

	DMA_InitTypeDef DMA_InitStructure;
	RCC_AHBPeriphClockCmd(RCC_AHBPeriph_DMA2, ENABLE);

	DMA_DeInit(DMA2_Channel3);
	DMA_InitStructure.DMA_PeripheralBaseAddr = (uint32_t)&(DAC->DHR12R1);
	DMA_InitStructure.DMA_MemoryBaseAddr = (uint32_t)&sin_wave_data;
	DMA_InitStructure.DMA_DIR = DMA_DIR_PeripheralDST;
	DMA_InitStructure.DMA_BufferSize = 3808;
	DMA_InitStructure.DMA_PeripheralInc = DMA_PeripheralInc_Disable;
	DMA_InitStructure.DMA_MemoryInc = DMA_MemoryInc_Enable;
	DMA_InitStructure.DMA_PeripheralDataSize = DMA_PeripheralDataSize_HalfWord;
	DMA_InitStructure.DMA_MemoryDataSize = DMA_MemoryDataSize_HalfWord;
	DMA_InitStructure.DMA_Mode = DMA_Mode_Normal;//DMA_Mode_Circular;
	DMA_InitStructure.DMA_Priority = DMA_Priority_VeryHigh;
	DMA_InitStructure.DMA_M2M = DMA_M2M_Disable;
	DMA_Init(DMA2_Channel3, &DMA_InitStructure);
	DMA_ITConfig(DMA2_Channel3, DMA_IT_TC, DISABLE);
	DMA_Cmd(DMA2_Channel3, DISABLE);


	InitTimer6_1(468);

	DMA_ITConfig(DMA2_Channel3, DMA_IT_TC, ENABLE);
	DMA_Cmd(DMA2_Channel3, DISABLE);
	TIM_Cmd(TIM6, ENABLE);
}

以上代码为基于stm32f1xx的DAC加定时器加DMA组成的传输欢迎指正错误.