FMC和FSMC是一样的东西，只是FMC更可控地址更多又可以驱动SDRAM,用法都一样
！！！！！！！！！！！！！！！！！！！！！！！！！！！！！！！
总结：其实fsmc更像是一个有着特定转换时序功能的寄存器，每个fsmc映射在芯片内存里的地址都有一个这样的寄存器，你往这个映射的地址里赋值，这个赋值信息先到达对应fsmc寄存器，他不会像普通寄存器一样直接控制32位地址线去传输地址再用数据线去发送读取数据，而是会用地址线去选中外设并模拟8080时序 去发送读取数据
！！！！！！！！！！！！！！！！！！！！！！！！！！！！！！！！！！！！！！！！！！！
例子：这个例子是因为fsmc支持控制sram的时序也有也是8080时序所以才能借此驱动lcd，它也只用到一个地址就可以搞定，完全不像sram要用很多地址
实现：将FMC_ADDR_CMD FMC_ADDR_DATA FMC_ADDR_DATA分别define定义成fsmc引脚地址，然后往里面赋值就会使fsmc通过地址线选择特定地址并模仿8080时序在对应地址区域引脚发送/读取内容（注意要把其地址线第A【10】位或其他位引脚搞成8080中指定数据还是命令得引脚RS）
fmsc控制sram里，实现通过地址线选中再通过数据线模拟8080时序读取或发送，也有8080时序，再把地址中的一位连到8080时序的RS引脚作为指定数据还是命令
这个A【10】就是fsmc赋值特定地址中的第10位，只要赋值的地址A【10】可为1 0就行
fmsc控制sram，实现通过地址线选中再通过数据线模拟8080时序读取或发送，也有8080时序，再把地址中的一位连到8080时序的RS引脚作为指定数据还是命令
看不懂没关系，再往下看完再回来理解
以上面这个为例，前面已经设置为16位数据模式，所以往地址赋值（注意非8位模式都具有位置偏移）数据后模拟发送的数据只会控制FMC_D0-FMC_D15数据线，控fsmc第四区中第四小区中地址赋值一个数值：控制设置x坐标命令0x2A，再往该地址里赋值0 再赋值0 再赋值x的高四位 再赋值x的低四位 对应fsmc接收到赋值后进行的操作：先模拟8080时序分别发送0x2A 0 0 x高四位 x低四位正好完成lcd设置x坐标命令
读取也是一样，先发送读取命令，然后向将fsmc地址里内容赋值给自定义变量就可以模拟8080读取时序
FMC，Flexible Memory Controller，灵活的存储控制器。
用途：用于驱动NOR/PSRAM，NAND/PC卡，同步DRAM(SDRAM/Mobile LPSDR SDRAM)等。配置好FMC，存储器当成普通外设使用。定义一个指向这些地址的指针，通过对指针操作就可以直接修改存储单元的内容，FMC自动完成读写命令和数据访问操作，不需要程序去实现时序。
FSMC (Flexible System Management Controller) 和 FMC (Field Programmable Memory Controller)，都能控制SRAM (Static Random Access Memory)。它们都是设计用来管理内存的，包括SRAM在内的各种类型的随机访问存储器。
FMC，作为专门的存储器控制器，它的主要任务就是控制外部存储，如SRAM，通常提供针对这种快速、易丢失数据类型的高速、低延迟访问。FMC可能会支持多种存储类型，包括SRAM，并通过预定义的接口（如SPI、LVDS等）连接到电路板上。
FSMC则是更通用的系统管理控制器，除了控制存储器外，还可以管理其他I/O接口、时钟管理等功能。因此，在某些系统设计中，它同样有能力控制SRAM，尤其是在需要更多系统管理功能的情况下。
所以，两者都可以控制SRAM，选择取决于系统的具体需求以及制造商的设计偏好。
FSMC结构
引脚功能
FSMC_D一共有32条，FSMC_A一共有26条地址线加上默认区固定头头总共32位地址
可选时序时间
FMC模式：能支持模仿时序去控制的外设
lcd是8080的驱动方式跟sram很像，又需要上升沿，就需要用模式A
他分了四个区每个区中分为了四个小区，每个小区都有对应得片选信号，你选择哪个小区的地址赋值，他就会拉低对应的片选信号去选择外设，它对应的地址为HADDR总线（传输总线APB1,APB2一个东西其中【27：26】是根据小区内定的，【25：0】是对应26位地址（2^26=64M bytes）每个小区也是64M字节大小刚好能全用上，一共28位加上每大区的头头0x6 0x7...一共32位和stm32地址线一样的数，所以就能用32得地址访问信息去控制fmsc
-----------------------------------------------------------------------------------------------------------------------
简单来说FMC，FSMC就是个能适配多种存储器时序得外设，它的功能是能把对应接口的外设像驱动芯片内部外设，那种对着寄存器地址配置那样驱动起来
原理是把芯片内部的总线引出去，让外部外设能像芯片内部外设一样通过寄存器地址配置，而非还还需模拟外部外设时序去实现芯片与外设间得通讯
具体工作流程：你往总线里写fsmc所映射得地址配置赋值，该信息到达fsmc后他自动根据信息对应的外设，模拟fsmc能支持的外设时序 （sram nand nor psram pc等的时序）去控制外部外设
也就是说你只需要配置好fsmc后，在代码里给fsmc映射在芯片内存的地址内赋值信息，他就会自动帮你模拟时序发送对应信息去控制外部外设和读取外部外设
下面有一个例子就是用fsmc控制lcd（lcd和sram都是8080并口时序所以通用）的例子
HCLK来自rcc时钟树
数据位可选8位 16位 32位 对应具有相对位置偏移
若为8位 那模拟时序时就只会控制FMC_D0-FMC_D7数据线
如果是16位数据模式就把ble bhe都拉底使16条数据位都有效
若为16位 那模拟时序时就只会控制FMC_D0-FMC_D15数据线
若为32位 那模拟时序时就只会控制FMC_D0-FMC_D31数据线
正是因为这里的16位数据模式时把原本两位地址合并成一位导致地址存在原来地址*2=现在地址，所以原本地址线为19现在变20
FSMC的寄存器配置
这个扩展模式如果你打开了，那读时序和写时序都会一起用读时序的配置，写时序的配置就会被摒弃，若关闭就各用各的
因为根据时序图可以看出，DATAST数据保持时间和ADDSET地址建立时间他俩组合而成DATA传输数据时的间隔，又因为间隔在手册里有限制要使DATAST和ADDSET分别接近一个HCLK周期，所以才要计算设置为多少合适。HCLK来自RCC
因为F1得fsmc出了点小差错导致你配置ADDSET为x时实际为x+1个HCLK
HAL库把他们define了另一个不同名字，不需要像寄存器代码里用寄存器组得方式配置
通过定义不同的FMC_ADDR_CMD FMC_ADDR_DATA FMC_ADDR_DATA地址和赋值
eg：
//发送命令代码示例
void lcd_wr_cmd(volatile uint16_t cmd)
{
cmd = cmd;
*(uint16_t *)(FMC_ADDR_CMD) = cmd;
}
//发送数据代码示例
void lcd_wr_data(volatile uint16_t data)
{
data = data;
*(uint16_t *)(FMC_ADDR_DATA) = data;
}
//读取内容代码示例
uint16_t lcd_rd_data(void)
{
volatile uint16_t ram;
ram = *(uint16_t *)(FMC_ADDR_DATA);
return ram;
}
FSMC模拟8080时序控制LCD
原理：配置好fsmc后，在代码里给fsmc映射在芯片内存的不同区域引脚地里址赋值信息，他就会自动帮你模拟时序发送对应信息去控制外部外设和读取外部外设
下面就是计算怎么用地址总线中的一条去用发地址的方式模拟RS高低电平，指定数据是命令还是数据
实现：将FMC_ADDR_CMD FMC_ADDR_DATA FMC_ADDR_DATA分别define定义成fsmc引脚地址，然后往里面赋值就会使fsmc模仿8080时序在对应地址区域引脚发送/读取内容（注意要把其第A【10】位引脚搞成8080中指定数据还是命令得引脚）
fmsc控制sram里，实现通过地址线选中再通过数据线模拟8080时序读取或发送，也有8080时序，再把地址中的一位连到8080时序的RS引脚作为指定数据还是命令
这个A【10】就是fsmc赋值特定地址中的第10位，只要赋值的地址A【10】可为1 0就行
以上面这个为例，前面已经设置为16位数据模式，所以往地址赋值（注意非8位模式都具有位置偏移）数据后模拟发送的数据只会控制FMC_D0-FMC_D15数据线，控fsmc第四区中第四小区中地址赋值一个数值：控制设置x坐标命令0x2A，再往该地址里赋值0 再赋值0 再赋值x的高四位 再赋值x的低四位 对应fsmc接收到赋值后进行的操作：先模拟8080时序分别发送0x2A 0 0 x高四位 x低四位正好完成lcd设置x坐标命令
//发送命令代码示例
void lcd_wr_cmd(volatile uint16_t cmd)
{
cmd = cmd;
*(uint16_t *)(FMC_ADDR_CMD) = cmd;
}
//发送数据代码示例
void lcd_wr_data(volatile uint16_t data)
{
data = data;
*(uint16_t *)(FMC_ADDR_DATA) = data;
}
//读取内容代码示例
uint16_t lcd_rd_data(void)
{
volatile uint16_t ram;
ram = *(uint16_t *)(FMC_ADDR_DATA);
return ram;
}
led.c
#include "stdlib.h"
#include "./BSP/LCD/lcd.h"
#include "./BSP/LCD/lcdfont.h"
#include "./SYSTEM/usart/usart.h"
/* lcd_ex.c存放各个LCD驱动IC的寄存器初始化部分代码,以简化lcd.c,该.c文件
* 不直接加入到工程里面,只有lcd.c会用到,所以通过include的形式添加.(不要在
* 其他文件再包含该.c文件!!否则会报错!)
*/
#include "./BSP/LCD/lcd_ex.c"
SRAM_HandleTypeDef g_sram_handle; /* SRAM句柄(用于控制LCD) */
/* LCD的画笔颜色和背景色 */
uint32_t g_point_color = 0XF800; /* 画笔颜色 */
uint32_t g_back_color = 0XFFFF; /* 背景色 */
/* 管理LCD重要参数 */
_lcd_dev lcddev;
/**
* @brief LCD写数据
* @param data: 要写入的数据
* @retval 无
*/
void lcd_wr_data(volatile uint16_t data)
{
data = data; /* 使用-O2优化的时候,必须插入的延时 */
LCD->LCD_RAM = data;
}
/**
* @brief LCD写寄存器编号/地址函数
* @param regno: 寄存器编号/地址
* @retval 无
*/
void lcd_wr_regno(volatile uint16_t regno)
{
regno = regno; /* 使用-O2优化的时候,必须插入的延时 */
LCD->LCD_REG = regno; /* 写入要写的寄存器序号 */
}
/**
* @brief LCD写寄存器
* @param regno:寄存器编号/地址
* @param data:要写入的数据
* @retval 无
*/
void lcd_write_reg(uint16_t regno, uint16_t data)
{
LCD->LCD_REG = regno; /* 写入要写的寄存器序号 */
LCD->LCD_RAM = data; /* 写入数据 */
}
/**
* @brief LCD延时函数,仅用于部分在mdk -O1时间优化时需要设置的地方
* @param t:延时的数值
* @retval 无
*/
static void lcd_opt_delay(uint32_t i)
{
while (i--);
}
/**
* @brief LCD读数据
* @param 无
* @retval 读取到的数据
*/
static uint16_t lcd_rd_data(void)
{
volatile uint16_t ram; /* 防止被优化 */
lcd_opt_delay(2);
ram = LCD->LCD_RAM;
return ram;
}
/**
* @brief 准备写GRAM
* @param 无
* @retval 无
*/
void lcd_write_ram_prepare(void)
{
LCD->LCD_REG = lcddev.wramcmd;
}
/**
* @brief 读取个某点的颜色值
* @param x,y:坐标
* @retval 此点的颜色(32位颜色,方便兼容LTDC)
*/
uint32_t lcd_read_point(uint16_t x, uint16_t y)
{
uint16_t r = 0, g = 0, b = 0;
if (x >= lcddev.width || y >= lcddev.height)return 0; /* 超过了范围,直接返回 */
lcd_set_cursor(x, y); /* 设置坐标 */
if (lcddev.id == 0X5510)
{
lcd_wr_regno(0X2E00); /* 5510 发送读GRAM指令 */
}
else
{
lcd_wr_regno(0X2E); /* 9341/5310/1963/7789/7796/9806 等发送读GRAM指令 */
}
r = lcd_rd_data(); /* 假读(dummy read) */
if (lcddev.id == 0x1963)
{
return r; /* 1963直接读就可以 */
}
r = lcd_rd_data(); /* 实际坐标颜色 */
if (lcddev.id == 0x7796) /* 7796 一次读取一个像素值 */
{
return r;
}
/* ILI9341/NT35310/NT35510/ST7789/ILI9806 要分2次读出 */
b = lcd_rd_data();
g = r & 0XFF; /* 对于 9341/5310/5510/7789/9806, 第一次读取的是RG的值,R在前,G在后,各占8位 */
g <<= 8;
return (((r >> 11) << 11) | ((g >> 10) << 5) | (b >> 11)); /* 9341/5310/5510/7789/9806 需要公式转换一下 */
}
/**
* @brief LCD开启显示
* @param 无
* @retval 无
*/
void lcd_display_on(void)
{
if (lcddev.id == 0X5510)
{
lcd_wr_regno(0X2900); /* 开启显示 */
}
else /* 9341/5310/1963/7789/7796/9806 等发送开启显示指令 */
{
lcd_wr_regno(0X29); /* 开启显示 */
}
}
/**
* @brief LCD关闭显示
* @param 无
* @retval 无
*/
void lcd_display_off(void)
{
if (lcddev.id == 0X5510)
{
lcd_wr_regno(0X2800); /* 关闭显示 */
}
else /* 9341/5310/1963/7789/7796/9806 等发送关闭显示指令 */
{
lcd_wr_regno(0X28); /* 关闭显示 */
}
}
/**
* @brief 设置光标位置(对RGB屏无效)
* @param x,y: 坐标
* @retval 无
*/
void lcd_set_cursor(uint16_t x, uint16_t y)
{
if (lcddev.id == 0X1963)
{
if (lcddev.dir == 0) /* 竖屏模式, x坐标需要变换 */
{
x = lcddev.width - 1 - x;
lcd_wr_regno(lcddev.setxcmd);
lcd_wr_data(0);
lcd_wr_data(0);
lcd_wr_data(x >> 8);
lcd_wr_data(x & 0XFF);
}
else /* 横屏模式 */
{
lcd_wr_regno(lcddev.setxcmd);
lcd_wr_data(x >> 8);
lcd_wr_data(x & 0XFF);
lcd_wr_data((lcddev.width - 1) >> 8);
lcd_wr_data((lcddev.width - 1) & 0XFF);
}
lcd_wr_regno(lcddev.setycmd);
lcd_wr_data(y >> 8);
lcd_wr_data(y & 0XFF);
lcd_wr_data((lcddev.height - 1) >> 8);
lcd_wr_data((lcddev.height - 1) & 0XFF);
}
else if (lcddev.id == 0X5510)
{
lcd_wr_regno(lcddev.setxcmd);
lcd_wr_data(x >> 8);
lcd_wr_regno(lcddev.setxcmd + 1);
lcd_wr_data(x & 0XFF);
lcd_wr_regno(lcddev.setycmd);
lcd_wr_data(y >> 8);
lcd_wr_regno(lcddev.setycmd + 1);
lcd_wr_data(y & 0XFF);
}
else /* 9341/5310/7789/7796/9806 等 设置坐标 */
{
lcd_wr_regno(lcddev.setxcmd);
lcd_wr_data(x >> 8);
lcd_wr_data(x & 0XFF);
lcd_wr_regno(lcddev.setycmd);
lcd_wr_data(y >> 8);
lcd_wr_data(y & 0XFF);
}
}
/**
* @brief 设置LCD的自动扫描方向(对RGB屏无效)
* @note
* 9341/5310/5510/1963/7789/7796/9806等IC已经实际测试
* 注意:其他函数可能会受到此函数设置的影响(尤其是9341),
* 所以,一般设置为L2R_U2D即可,如果设置为其他扫描方式,可能导致显示不正常.
*
* @param dir:0~7,代表8个方向(具体定义见lcd.h)
* @retval 无
*/
void lcd_scan_dir(uint8_t dir)
{
uint16_t regval = 0;
uint16_t dirreg = 0;
uint16_t temp;
/* 横屏时，对1963不改变扫描方向, 其他IC改变扫描方向！竖屏时1963改变方向, 其他IC不改变扫描方向 */
if ((lcddev.dir == 1 && lcddev.id != 0X1963) || (lcddev.dir == 0 && lcddev.id == 0X1963))
{
switch (dir) /* 方向转换 */
{
case 0:
dir = 6;
break;
case 1:
dir = 7;
break;
case 2:
dir = 4;
break;
case 3:
dir = 5;
break;
case 4:
dir = 1;
break;
case 5:
dir = 0;
break;
case 6:
dir = 3;
break;
case 7:
dir = 2;
break;
}
}
/* 根据扫描方式 设置 0X36/0X3600 寄存器 bit 5,6,7 位的值 */
switch (dir)
{
case L2R_U2D:/* 从左到右,从上到下 */
regval |= (0 << 7) | (0 << 6) | (0 << 5);
break;
case L2R_D2U:/* 从左到右,从下到上 */
regval |= (1 << 7) | (0 << 6) | (0 << 5);
break;
case R2L_U2D:/* 从右到左,从上到下 */
regval |= (0 << 7) | (1 << 6) | (0 << 5);
break;
case R2L_D2U:/* 从右到左,从下到上 */
regval |= (1 << 7) | (1 << 6) | (0 << 5);
break;
case U2D_L2R:/* 从上到下,从左到右 */
regval |= (0 << 7) | (0 << 6) | (1 << 5);
break;
case U2D_R2L:/* 从上到下,从右到左 */
regval |= (0 << 7) | (1 << 6) | (1 << 5);
break;
case D2U_L2R:/* 从下到上,从左到右 */
regval |= (1 << 7) | (0 << 6) | (1 << 5);
break;
case D2U_R2L:/* 从下到上,从右到左 */
regval |= (1 << 7) | (1 << 6) | (1 << 5);
break;
}
dirreg = 0X36; /* 对绝大部分驱动IC, 由0X36寄存器控制 */
if (lcddev.id == 0X5510)
{
dirreg = 0X3600; /* 对于5510, 和其他驱动ic的寄存器有差异 */
}
/* 9341 & 7789 & 7796 要设置BGR位 */
if (lcddev.id == 0X9341 || lcddev.id == 0X7789 || lcddev.id == 0x7796)
{
regval |= 0X08;
}
lcd_write_reg(dirreg, regval);
if (lcddev.id != 0X1963) /* 1963不做坐标处理 */
{
if (regval & 0X20)
{
if (lcddev.width < lcddev.height) /* 交换X,Y */
{
temp = lcddev.width;
lcddev.width = lcddev.height;
lcddev.height = temp;
}
}
else
{
if (lcddev.width > lcddev.height) /* 交换X,Y */
{
temp = lcddev.width;
lcddev.width = lcddev.height;
lcddev.height = temp;
}
}
}
/* 设置显示区域(开窗)大小 */
if (lcddev.id == 0X5510)
{
lcd_wr_regno(lcddev.setxcmd);
lcd_wr_data(0);
lcd_wr_regno(lcddev.setxcmd + 1);
lcd_wr_data(0);
lcd_wr_regno(lcddev.setxcmd + 2);
lcd_wr_data((lcddev.width - 1) >> 8);
lcd_wr_regno(lcddev.setxcmd + 3);
lcd_wr_data((lcddev.width - 1) & 0XFF);
lcd_wr_regno(lcddev.setycmd);
lcd_wr_data(0);
lcd_wr_regno(lcddev.setycmd + 1);
lcd_wr_data(0);
lcd_wr_regno(lcddev.setycmd + 2);
lcd_wr_data((lcddev.height - 1) >> 8);
lcd_wr_regno(lcddev.setycmd + 3);
lcd_wr_data((lcddev.height - 1) & 0XFF);
}
else
{
lcd_wr_regno(lcddev.setxcmd);
lcd_wr_data(0);
lcd_wr_data(0);
lcd_wr_data((lcddev.width - 1) >> 8);
lcd_wr_data((lcddev.width - 1) & 0XFF);
lcd_wr_regno(lcddev.setycmd);
lcd_wr_data(0);
lcd_wr_data(0);
lcd_wr_data((lcddev.height - 1) >> 8);
lcd_wr_data((lcddev.height - 1) & 0XFF);
}
}
/**
* @brief 画点
* @param x,y: 坐标
* @param color: 点的颜色(32位颜色,方便兼容LTDC)
* @retval 无
*/
void lcd_draw_point(uint16_t x, uint16_t y, uint32_t color)
{
lcd_set_cursor(x, y); /* 设置光标位置 */
lcd_write_ram_prepare(); /* 开始写入GRAM */
LCD->LCD_RAM = color;
}
/**
* @brief SSD1963背光亮度设置函数
* @param pwm: 背光等级,0~100.越大越亮.
* @retval 无
*/
void lcd_ssd_backlight_set(uint8_t pwm)
{
lcd_wr_regno(0xBE); /* 配置PWM输出 */
lcd_wr_data(0x05); /* 1设置PWM频率 */
lcd_wr_data(pwm * 2.55); /* 2设置PWM占空比 */
lcd_wr_data(0x01); /* 3设置C */
lcd_wr_data(0xFF); /* 4设置D */
lcd_wr_data(0x00); /* 5设置E */
lcd_wr_data(0x00); /* 6设置F */
}
/**
* @brief 设置LCD显示方向
* @param dir:0,竖屏; 1,横屏
* @retval 无
*/
void lcd_display_dir(uint8_t dir)
{
lcddev.dir = dir; /* 竖屏/横屏 */
if (dir == 0) /* 竖屏 */
{
lcddev.width = 240;
lcddev.height = 320;
if (lcddev.id == 0x5510)
{
lcddev.wramcmd = 0X2C00;
lcddev.setxcmd = 0X2A00;
lcddev.setycmd = 0X2B00;
lcddev.width = 480;
lcddev.height = 800;
}
else if (lcddev.id == 0X1963)
{
lcddev.wramcmd = 0X2C; /* 设置写入GRAM的指令 */
lcddev.setxcmd = 0X2B; /* 设置写X坐标指令 */
lcddev.setycmd = 0X2A; /* 设置写Y坐标指令 */
lcddev.width = 480; /* 设置宽度480 */
lcddev.height = 800; /* 设置高度800 */
}
else /* 其他IC, 包括: 9341 / 5310 / 7789 / 7796 / 9806 等IC */
{
lcddev.wramcmd = 0X2C;
lcddev.setxcmd = 0X2A;
lcddev.setycmd = 0X2B;
}
if (lcddev.id == 0X5310 || lcddev.id == 0x7796) /* 如果是5310/7796 则表示是 320*480分辨率 */
{
lcddev.width = 320;
lcddev.height = 480;
}
if (lcddev.id == 0X9806) /* 如果是9806 则表示是 480*800 分辨率 */
{
lcddev.width = 480;
lcddev.height = 800;
}
}
else /* 横屏 */
{
lcddev.width = 320; /* 默认宽度 */
lcddev.height = 240; /* 默认高度 */
if (lcddev.id == 0x5510)
{
lcddev.wramcmd = 0X2C00;
lcddev.setxcmd = 0X2A00;
lcddev.setycmd = 0X2B00;
lcddev.width = 800;
lcddev.height = 480;
}
else if (lcddev.id == 0X1963 || lcddev.id == 0x9806)
{
lcddev.wramcmd = 0X2C; /* 设置写入GRAM的指令 */
lcddev.setxcmd = 0X2A; /* 设置写X坐标指令 */
lcddev.setycmd = 0X2B; /* 设置写Y坐标指令 */
lcddev.width = 800; /* 设置宽度800 */
lcddev.height = 480; /* 设置高度480 */
}
else /* 其他IC, 包括: 9341 / 5310 / 7789 / 7796 等IC */
{
lcddev.wramcmd = 0X2C;
lcddev.setxcmd = 0X2A;
lcddev.setycmd = 0X2B;
}
if (lcddev.id == 0X5310 || lcddev.id == 0x7796) /* 如果是5310/7796 则表示是 320*480分辨率 */
{
lcddev.width = 480;
lcddev.height = 320;
}
}
lcd_scan_dir(DFT_SCAN_DIR); /* 默认扫描方向 */
}
/**
* @brief 设置窗口(对RGB屏无效),并自动设置画点坐标到窗口左上角(sx,sy).
* @param sx,sy:窗口起始坐标(左上角)
* @param width,height:窗口宽度和高度,必须大于0!!
* @note 窗体大小:width*height.
*
* @retval 无
*/
void lcd_set_window(uint16_t sx, uint16_t sy, uint16_t width, uint16_t height)
{
uint16_t twidth, theight;
twidth = sx + width - 1;
theight = sy + height - 1;
if (lcddev.id == 0X1963 && lcddev.dir != 1) /* 1963竖屏特殊处理 */
{
sx = lcddev.width - width - sx;
height = sy + height - 1;
lcd_wr_regno(lcddev.setxcmd);
lcd_wr_data(sx >> 8);
lcd_wr_data(sx & 0XFF);
lcd_wr_data((sx + width - 1) >> 8);
lcd_wr_data((sx + width - 1) & 0XFF);
lcd_wr_regno(lcddev.setycmd);
lcd_wr_data(sy >> 8);
lcd_wr_data(sy & 0XFF);
lcd_wr_data(height >> 8);
lcd_wr_data(height & 0XFF);
}
else if (lcddev.id == 0X5510)
{
lcd_wr_regno(lcddev.setxcmd);
lcd_wr_data(sx >> 8);
lcd_wr_regno(lcddev.setxcmd + 1);
lcd_wr_data(sx & 0XFF);
lcd_wr_regno(lcddev.setxcmd + 2);
lcd_wr_data(twidth >> 8);
lcd_wr_regno(lcddev.setxcmd + 3);
lcd_wr_data(twidth & 0XFF);
lcd_wr_regno(lcddev.setycmd);
lcd_wr_data(sy >> 8);
lcd_wr_regno(lcddev.setycmd + 1);
lcd_wr_data(sy & 0XFF);
lcd_wr_regno(lcddev.setycmd + 2);
lcd_wr_data(theight >> 8);
lcd_wr_regno(lcddev.setycmd + 3);
lcd_wr_data(theight & 0XFF);
}
else /* 9341/5310/7789/1963/7796/9806横屏 等 设置窗口 */
{
lcd_wr_regno(lcddev.setxcmd);
lcd_wr_data(sx >> 8);
lcd_wr_data(sx & 0XFF);
lcd_wr_data(twidth >> 8);
lcd_wr_data(twidth & 0XFF);
lcd_wr_regno(lcddev.setycmd);
lcd_wr_data(sy >> 8);
lcd_wr_data(sy & 0XFF);
lcd_wr_data(theight >> 8);
lcd_wr_data(theight & 0XFF);
}
}
/**
* @brief SRAM底层驱动，时钟使能，引脚分配
* @note 此函数会被HAL_SRAM_Init()调用,初始化读写总线引脚
* @param hsram:SRAM句柄
* @retval 无
*/
void HAL_SRAM_MspInit(SRAM_HandleTypeDef *hsram)
{
GPIO_InitTypeDef gpio_init_struct;
__HAL_RCC_FSMC_CLK_ENABLE(); /* 使能FSMC时钟 */
__HAL_RCC_GPIOD_CLK_ENABLE(); /* 使能GPIOD时钟 */
__HAL_RCC_GPIOE_CLK_ENABLE(); /* 使能GPIOE时钟 */
/* 初始化PD0,1,8,9,10,14,15 */
gpio_init_struct.Pin = GPIO_PIN_0 | GPIO_PIN_1 | GPIO_PIN_8 \
| GPIO_PIN_9 | GPIO_PIN_10 | GPIO_PIN_14 | GPIO_PIN_15;
gpio_init_struct.Mode = GPIO_MODE_AF_PP; /* 推挽复用 */
gpio_init_struct.Pull = GPIO_PULLUP; /* 上拉 */
gpio_init_struct.Speed = GPIO_SPEED_FREQ_HIGH; /* 高速 */
HAL_GPIO_Init(GPIOD, &gpio_init_struct); /* 初始化 */
/* 初始化PE7,8,9,10,11,12,13,14,15 */
gpio_init_struct.Pin = GPIO_PIN_7 | GPIO_PIN_8 | GPIO_PIN_9 | GPIO_PIN_10 \
| GPIO_PIN_11 | GPIO_PIN_12 | GPIO_PIN_13 | GPIO_PIN_14 | GPIO_PIN_15;
HAL_GPIO_Init(GPIOE, &gpio_init_struct);
}
/**
* @brief 初始化LCD
* @note 该初始化函数可以初始化各种型号的LCD(详见本.c文件最前面的描述)
*
* @param 无
* @retval 无
*/
void lcd_init(void)
{
GPIO_InitTypeDef gpio_init_struct;
FSMC_NORSRAM_TimingTypeDef fsmc_read_handle;
FSMC_NORSRAM_TimingTypeDef fsmc_write_handle;
LCD_CS_GPIO_CLK_ENABLE(); /* LCD_CS脚时钟使能 */
LCD_WR_GPIO_CLK_ENABLE(); /* LCD_WR脚时钟使能 */
LCD_RD_GPIO_CLK_ENABLE(); /* LCD_RD脚时钟使能 */
LCD_RS_GPIO_CLK_ENABLE(); /* LCD_RS脚时钟使能 */
LCD_BL_GPIO_CLK_ENABLE(); /* LCD_BL脚时钟使能 */
gpio_init_struct.Pin = LCD_CS_GPIO_PIN;
gpio_init_struct.Mode = GPIO_MODE_AF_PP; /* 推挽复用 */
gpio_init_struct.Pull = GPIO_PULLUP; /* 上拉 */
gpio_init_struct.Speed = GPIO_SPEED_FREQ_HIGH; /* 高速 */
HAL_GPIO_Init(LCD_CS_GPIO_PORT, &gpio_init_struct); /* 初始化LCD_CS引脚 */
gpio_init_struct.Pin = LCD_WR_GPIO_PIN;
HAL_GPIO_Init(LCD_WR_GPIO_PORT, &gpio_init_struct); /* 初始化LCD_WR引脚 */
gpio_init_struct.Pin = LCD_RD_GPIO_PIN;
HAL_GPIO_Init(LCD_RD_GPIO_PORT, &gpio_init_struct); /* 初始化LCD_RD引脚 */
gpio_init_struct.Pin = LCD_RS_GPIO_PIN;
HAL_GPIO_Init(LCD_RS_GPIO_PORT, &gpio_init_struct); /* 初始化LCD_RS引脚 */
gpio_init_struct.Pin = LCD_BL_GPIO_PIN;
gpio_init_struct.Mode = GPIO_MODE_OUTPUT_PP; /* 推挽输出 */
HAL_GPIO_Init(LCD_BL_GPIO_PORT, &gpio_init_struct); /* LCD_BL引脚模式设置(推挽输出) */
g_sram_handle.Instance = FSMC_NORSRAM_DEVICE;
g_sram_handle.Extended = FSMC_NORSRAM_EXTENDED_DEVICE;
g_sram_handle.Init.NSBank = FSMC_NORSRAM_BANK4; /* 使用NE4 */
g_sram_handle.Init.DataAddressMux = FSMC_DATA_ADDRESS_MUX_DISABLE; /* 地址/数据线不复用 */
g_sram_handle.Init.MemoryDataWidth = FSMC_NORSRAM_MEM_BUS_WIDTH_16; /* 16位数据宽度 */
g_sram_handle.Init.BurstAccessMode = FSMC_BURST_ACCESS_MODE_DISABLE; /* 是否使能突发访问,仅对同步突发存储器有效,此处未用到 */
g_sram_handle.Init.WaitSignalPolarity = FSMC_WAIT_SIGNAL_POLARITY_LOW; /* 等待信号的极性,仅在突发模式访问下有用 */
g_sram_handle.Init.WaitSignalActive = FSMC_WAIT_TIMING_BEFORE_WS; /* 存储器是在等待周期之前的一个时钟周期还是等待周期期间使能NWAIT */
g_sram_handle.Init.WriteOperation = FSMC_WRITE_OPERATION_ENABLE; /* 存储器写使能 */
g_sram_handle.Init.WaitSignal = FSMC_WAIT_SIGNAL_DISABLE; /* 等待使能位,此处未用到 */
g_sram_handle.Init.ExtendedMode = FSMC_EXTENDED_MODE_ENABLE; /* 读写使用不同的时序 */
g_sram_handle.Init.AsynchronousWait = FSMC_ASYNCHRONOUS_WAIT_DISABLE; /* 是否使能同步传输模式下的等待信号,此处未用到 */
g_sram_handle.Init.WriteBurst = FSMC_WRITE_BURST_DISABLE; /* 禁止突发写 */
/* FSMC读时序控制寄存器 */
fsmc_read_handle.AddressSetupTime = 0; /* 地址建立时间(ADDSET)为1个HCLK 1/72M = 13.9ns (实际 > 200ns) */
fsmc_read_handle.AddressHoldTime = 0; /* 地址保持时间(ADDHLD) 模式A是没有用到 */
/* 因为液晶驱动IC的读数据的时候，速度不能太快,尤其是个别奇葩芯片 */
fsmc_read_handle.DataSetupTime = 15; /* 数据保存时间(DATAST)为16个HCLK = 13.9 * 16 = 222.4ns */
fsmc_read_handle.AccessMode = FSMC_ACCESS_MODE_A; /* 模式A */
/* FSMC写时序控制寄存器 */
fsmc_write_handle.AddressSetupTime = 0; /* 地址建立时间(ADDSET)为1个HCLK = 13.9ns */
fsmc_write_handle.AddressHoldTime = 0; /* 地址保持时间(ADDHLD) 模式A是没有用到 */
fsmc_write_handle.DataSetupTime = 1; /* 数据保存时间(DATAST)为2个HCLK = 13.9 * 2 = 27.8ns (实际 > 200ns) */
/* 某些液晶驱动IC的写信号脉宽，最少也得50ns。 */
fsmc_write_handle.AccessMode = FSMC_ACCESS_MODE_A; /* 模式A */
HAL_SRAM_Init(&g_sram_handle, &fsmc_read_handle, &fsmc_write_handle);
delay_ms(50); /* 初始化FSMC后,必须等待一定时间才能开始初始化 */
/* 尝试9341 ID的读取 */
lcd_wr_regno(0XD3);
lcddev.id = lcd_rd_data(); /* dummy read */
lcddev.id = lcd_rd_data(); /* 读到0X00 */
lcddev.id = lcd_rd_data(); /* 读取0X93 */
lcddev.id <<= 8;
lcddev.id |= lcd_rd_data(); /* 读取0X41 */
if (lcddev.id != 0X9341) /* 不是 9341 , 尝试看看是不是 ST7789 */
{
lcd_wr_regno(0X04);
lcddev.id = lcd_rd_data(); /* dummy read */
lcddev.id = lcd_rd_data(); /* 读到0X85 */
lcddev.id = lcd_rd_data(); /* 读取0X85 */
lcddev.id <<= 8;
lcddev.id |= lcd_rd_data(); /* 读取0X52 */
if (lcddev.id == 0X8552) /* 将8552的ID转换成7789 */
{
lcddev.id = 0x7789;
}
if (lcddev.id != 0x7789) /* 也不是ST7789, 尝试是不是 NT35310 */
{
lcd_wr_regno(0xD4);
lcddev.id = lcd_rd_data(); /* dummy read */
lcddev.id = lcd_rd_data(); /* 读回0x01 */
lcddev.id = lcd_rd_data(); /* 读回0x53 */
lcddev.id <<= 8;
lcddev.id |= lcd_rd_data(); /* 这里读回0x10 */
if (lcddev.id != 0x5310) /* 也不是NT35310,尝试看看是不是ST7796 */
{
lcd_wr_regno(0XD3);
lcddev.id = lcd_rd_data(); /* dummy read */
lcddev.id = lcd_rd_data(); /* 读到0X00 */
lcddev.id = lcd_rd_data(); /* 读取0X77 */
lcddev.id <<= 8;
lcddev.id |= lcd_rd_data(); /* 读取0X96 */
if (lcddev.id != 0x7796) /* 也不是ST7796,尝试看看是不是NT35510 */
{
/* 发送密钥（厂家提供） */
lcd_write_reg(0xF000, 0x0055);
lcd_write_reg(0xF001, 0x00AA);
lcd_write_reg(0xF002, 0x0052);
lcd_write_reg(0xF003, 0x0008);
lcd_write_reg(0xF004, 0x0001);
lcd_wr_regno(0xC500); /* 读取ID低八位 */
lcddev.id = lcd_rd_data(); /* 读回0x55 */
lcddev.id <<= 8;
lcd_wr_regno(0xC501); /* 读取ID高八位 */
lcddev.id |= lcd_rd_data(); /* 读回0x10 */
delay_ms(5); /* 等待5ms, 因为0XC501指令对1963来说就是软件复位指令, 等待5ms让1963复位完成再操作 */
if (lcddev.id != 0x5510) /* 也不是NT5510,尝试看看是不是ILI9806 */
{
lcd_wr_regno(0XD3);
lcddev.id = lcd_rd_data(); /* dummy read */
lcddev.id = lcd_rd_data(); /* 读回0X00 */
lcddev.id = lcd_rd_data(); /* 读回0X98 */
lcddev.id <<= 8;
lcddev.id |= lcd_rd_data(); /* 读回0X06 */
if (lcddev.id != 0x9806) /* 也不是ILI9806,尝试看看是不是SSD1963 */
{
lcd_wr_regno(0xA1);
lcddev.id = lcd_rd_data();
lcddev.id = lcd_rd_data(); /* 读回0x57 */
lcddev.id <<= 8;
lcddev.id |= lcd_rd_data(); /* 读回0x61 */
if (lcddev.id == 0x5761) lcddev.id = 0x1963; /* SSD1963读回的ID是5761H,为方便区分,我们强制设置为1963 */
}
}
}
}
}
}
/* 特别注意, 如果在main函数里面屏蔽串口1初始化, 则会卡死在printf
* 里面(卡死在f_putc函数), 所以, 必须初始化串口1, 或者屏蔽掉下面
* 这行 printf 语句 !!!!!!!
*/
printf("LCD ID:%x\r\n", lcddev.id); /* 打印LCD ID */
if (lcddev.id == 0X7789)
{
lcd_ex_st7789_reginit(); /* 执行ST7789初始化 */
}
else if (lcddev.id == 0X9341)
{
lcd_ex_ili9341_reginit(); /* 执行ILI9341初始化 */
}
else if (lcddev.id == 0x5310)
{
lcd_ex_nt35310_reginit(); /* 执行NT35310初始化 */
}
else if (lcddev.id == 0x7796)
{
lcd_ex_st7796_reginit(); /* 执行ST7796初始化 */
}
else if (lcddev.id == 0x5510)
{
lcd_ex_nt35510_reginit(); /* 执行NT35510初始化 */
}
else if (lcddev.id == 0x9806)
{
lcd_ex_ili9806_reginit(); /* 执行ILI9806初始化 */
}
else if (lcddev.id == 0x1963)
{
lcd_ex_ssd1963_reginit(); /* 执行SSD1963初始化 */
lcd_ssd_backlight_set(100); /* 背光设置为最亮 */
}
lcd_display_dir(0); /* 默认为竖屏 */
LCD_BL(1); /* 点亮背光 */
lcd_clear(WHITE);
}
/**
* @brief 清屏函数
* @param color: 要清屏的颜色
* @retval 无
*/
void lcd_clear(uint16_t color)
{
uint32_t index = 0;
uint32_t totalpoint = lcddev.width;
totalpoint *= lcddev.height; /* 得到总点数 */
lcd_set_cursor(0x20, 0x0200); /* 设置光标位置 */
lcd_write_ram_prepare(); /* 开始写入GRAM */
for (index = 0; index < 3; index++)
{
LCD->LCD_RAM = color;
}
}
/**
* @brief 在指定区域内填充单个颜色
* @param (sx,sy),(ex,ey):填充矩形对角坐标,区域大小为:(ex - sx + 1) * (ey - sy + 1)
* @param color:要填充的颜色(32位颜色,方便兼容LTDC)
* @retval 无
*/
void lcd_fill(uint16_t sx, uint16_t sy, uint16_t ex, uint16_t ey, uint32_t color)
{
uint16_t i, j;
uint16_t xlen = 0;
xlen = ex - sx + 1;
for (i = sy; i <= ey; i++)
{
lcd_set_cursor(sx, i); /* 设置光标位置 */
lcd_write_ram_prepare(); /* 开始写入GRAM */
for (j = 0; j < xlen; j++)
{
LCD->LCD_RAM = color; /* 显示颜色 */
}
}
}
/**
* @brief 在指定区域内填充指定颜色块
* @param (sx,sy),(ex,ey):填充矩形对角坐标,区域大小为:(ex - sx + 1) * (ey - sy + 1)
* @param color: 要填充的颜色数组首地址
* @retval 无
*/
void lcd_color_fill(uint16_t sx, uint16_t sy, uint16_t ex, uint16_t ey, uint16_t *color)
{
uint16_t height, width;
uint16_t i, j;
width = ex - sx + 1; /* 得到填充的宽度 */
height = ey - sy + 1; /* 高度 */
for (i = 0; i < height; i++)
{
lcd_set_cursor(sx, sy + i); /* 设置光标位置 */
lcd_write_ram_prepare(); /* 开始写入GRAM */
for (j = 0; j < width; j++)
{
LCD->LCD_RAM = color[i * width + j]; /* 写入数据 */
}
}
}
/**
* @brief 画线
* @param x1,y1: 起点坐标
* @param x2,y2: 终点坐标
* @param color: 线的颜色
* @retval 无
*/
void lcd_draw_line(uint16_t x1, uint16_t y1, uint16_t x2, uint16_t y2, uint16_t color)
{
uint16_t t;
int xerr = 0, yerr = 0, delta_x, delta_y, distance;
int incx, incy, row, col;
delta_x = x2 - x1; /* 计算坐标增量 */
delta_y = y2 - y1;
row = x1;
col = y1;
if (delta_x > 0)incx = 1; /* 设置单步方向 */
else if (delta_x == 0)incx = 0; /* 垂直线 */
else
{
incx = -1;
delta_x = -delta_x;
}
if (delta_y > 0)incy = 1;
else if (delta_y == 0)incy = 0; /* 水平线 */
else
{
incy = -1;
delta_y = -delta_y;
}
if ( delta_x > delta_y)distance = delta_x; /* 选取基本增量坐标轴 */
else distance = delta_y;
for (t = 0; t <= distance + 1; t++ ) /* 画线输出 */
{
lcd_draw_point(row, col, color); /* 画点 */
xerr += delta_x ;
yerr += delta_y ;
if (xerr > distance)
{
xerr -= distance;
row += incx;
}
if (yerr > distance)
{
yerr -= distance;
col += incy;
}
}
}
/**
* @brief 画水平线
* @param x,y: 起点坐标
* @param len : 线长度
* @param color: 矩形的颜色
* @retval 无
*/
void lcd_draw_hline(uint16_t x, uint16_t y, uint16_t len, uint16_t color)
{
if ((len == 0) || (x > lcddev.width) || (y > lcddev.height))return;
lcd_fill(x, y, x + len - 1, y, color);
}
/**
* @brief 画矩形
* @param x1,y1: 起点坐标
* @param x2,y2: 终点坐标
* @param color: 矩形的颜色
* @retval 无
*/
void lcd_draw_rectangle(uint16_t x1, uint16_t y1, uint16_t x2, uint16_t y2, uint16_t color)
{
lcd_draw_line(x1, y1, x2, y1, color);
lcd_draw_line(x1, y1, x1, y2, color);
lcd_draw_line(x1, y2, x2, y2, color);
lcd_draw_line(x2, y1, x2, y2, color);
}
/**
* @brief 画圆
* @param x,y : 圆中心坐标
* @param r : 半径
* @param color: 圆的颜色
* @retval 无
*/
void lcd_draw_circle(uint16_t x0, uint16_t y0, uint8_t r, uint16_t color)
{
int a, b;
int di;
a = 0;
b = r;
di = 3 - (r << 1); /* 判断下个点位置的标志 */
while (a <= b)
{
lcd_draw_point(x0 + a, y0 - b, color); /* 5 */
lcd_draw_point(x0 + b, y0 - a, color); /* 0 */
lcd_draw_point(x0 + b, y0 + a, color); /* 4 */
lcd_draw_point(x0 + a, y0 + b, color); /* 6 */
lcd_draw_point(x0 - a, y0 + b, color); /* 1 */
lcd_draw_point(x0 - b, y0 + a, color);
lcd_draw_point(x0 - a, y0 - b, color); /* 2 */
lcd_draw_point(x0 - b, y0 - a, color); /* 7 */
a++;
/* 使用Bresenham算法画圆 */
if (di < 0)
{
di += 4 * a + 6;
}
else
{
di += 10 + 4 * (a - b);
b--;
}
}
}
/**
* @brief 填充实心圆
* @param x,y: 圆中心坐标
* @param r : 半径
* @param color: 圆的颜色
* @retval 无
*/
void lcd_fill_circle(uint16_t x, uint16_t y, uint16_t r, uint16_t color)
{
uint32_t i;
uint32_t imax = ((uint32_t)r * 707) / 1000 + 1;
uint32_t sqmax = (uint32_t)r * (uint32_t)r + (uint32_t)r / 2;
uint32_t xr = r;
lcd_draw_hline(x - r, y, 2 * r, color);
for (i = 1; i <= imax; i++)
{
if ((i * i + xr * xr) > sqmax)
{
/* draw lines from outside */
if (xr > imax)
{
lcd_draw_hline (x - i + 1, y + xr, 2 * (i - 1), color);
lcd_draw_hline (x - i + 1, y - xr, 2 * (i - 1), color);
}
xr--;
}
/* draw lines from inside (center) */
lcd_draw_hline(x - xr, y + i, 2 * xr, color);
lcd_draw_hline(x - xr, y - i, 2 * xr, color);
}
}
/**
* @brief 在指定位置显示一个字符
* @param x,y : 坐标
* @param chr : 要显示的字符:" "--->"~"
* @param size : 字体大小 12/16/24/32
* @param mode : 叠加方式(1); 非叠加方式(0);
* @param color : 字符的颜色;
* @retval 无
*/
void lcd_show_char(uint16_t x, uint16_t y, char chr, uint8_t size, uint8_t mode, uint16_t color)
{
uint8_t temp, t1, t;
uint16_t y0 = y;
uint8_t csize = 0;
uint8_t *pfont = 0;
csize = (size / 8 + ((size % 8) ? 1 : 0)) * (size / 2); /* 得到字体一个字符对应点阵集所占的字节数 */
chr = chr - ' '; /* 得到偏移后的值（ASCII字库是从空格开始取模，所以-' '就是对应字符的字库） */
switch (size)
{
case 12:
pfont = (uint8_t *)asc2_1206[chr]; /* 调用1206字体 */
break;
case 16:
pfont = (uint8_t *)asc2_1608[chr]; /* 调用1608字体 */
break;
case 24:
pfont = (uint8_t *)asc2_2412[chr]; /* 调用2412字体 */
break;
case 32:
pfont = (uint8_t *)asc2_3216[chr]; /* 调用3216字体 */
break;
default:
return ;
}
for (t = 0; t < csize; t++)
{
temp = pfont[t]; /* 获取字符的点阵数据 */
for (t1 = 0; t1 < 8; t1++) /* 一个字节8个点 */
{
if (temp & 0x80) /* 有效点,需要显示 */
{
lcd_draw_point(x, y, color); /* 画点出来,要显示这个点 */
}
else if (mode == 0) /* 无效点,不显示 */
{
lcd_draw_point(x, y, g_back_color); /* 画背景色,相当于这个点不显示(注意背景色由全局变量控制) */
}
temp <<= 1; /* 移位, 以便获取下一个位的状态 */
y++;
if (y >= lcddev.height)return; /* 超区域了 */
if ((y - y0) == size) /* 显示完一列了? */
{
y = y0; /* y坐标复位 */
x++; /* x坐标递增 */
if (x >= lcddev.width)return; /* x坐标超区域了 */
break;
}
}
}
}
/**
* @brief 平方函数, m^n
* @param m: 底数
* @param n: 指数
* @retval m的n次方
*/
static uint32_t lcd_pow(uint8_t m, uint8_t n)
{
uint32_t result = 1;
while (n--)result *= m;
return result;
}
/**
* @brief 显示len个数字
* @param x,y : 起始坐标
* @param num : 数值(0 ~ 2^32)
* @param len : 显示数字的位数
* @param size: 选择字体 12/16/24/32
* @param color : 数字的颜色;
* @retval 无
*/
void lcd_show_num(uint16_t x, uint16_t y, uint32_t num, uint8_t len, uint8_t size, uint16_t color)
{
uint8_t t, temp;
uint8_t enshow = 0;
for (t = 0; t < len; t++) /* 按总显示位数循环 */
{
temp = (num / lcd_pow(10, len - t - 1)) % 10; /* 获取对应位的数字 */
if (enshow == 0 && t < (len - 1)) /* 没有使能显示,且还有位要显示 */
{
if (temp == 0)
{
lcd_show_char(x + (size / 2)*t, y, ' ', size, 0, color);/* 显示空格,占位 */
continue; /* 继续下个一位 */
}
else
{
enshow = 1; /* 使能显示 */
}
}
lcd_show_char(x + (size / 2)*t, y, temp + '0', size, 0, color); /* 显示字符 */
}
}
/**
* @brief 扩展显示len个数字(高位是0也显示)
* @param x,y : 起始坐标
* @param num : 数值(0 ~ 2^32)
* @param len : 显示数字的位数
* @param size: 选择字体 12/16/24/32
* @param mode: 显示模式
* [7]:0,不填充;1,填充0.
* [6:1]:保留
* [0]:0,非叠加显示;1,叠加显示.
* @param color : 数字的颜色;
* @retval 无
*/
void lcd_show_xnum(uint16_t x, uint16_t y, uint32_t num, uint8_t len, uint8_t size, uint8_t mode, uint16_t color)
{
uint8_t t, temp;
uint8_t enshow = 0;
for (t = 0; t < len; t++) /* 按总显示位数循环 */
{
temp = (num / lcd_pow(10, len - t - 1)) % 10; /* 获取对应位的数字 */
if (enshow == 0 && t < (len - 1)) /* 没有使能显示,且还有位要显示 */
{
if (temp == 0)
{
if (mode & 0X80) /* 高位需要填充0 */
{
lcd_show_char(x + (size / 2)*t, y, '0', size, mode & 0X01, color); /* 用0占位 */
}
else
{
lcd_show_char(x + (size / 2)*t, y, ' ', size, mode & 0X01, color); /* 用空格占位 */
}
continue;
}
else
{
enshow = 1; /* 使能显示 */
}
}
lcd_show_char(x + (size / 2)*t, y, temp + '0', size, mode & 0X01, color);
}
}
/**
* @brief 显示字符串
* @param x,y : 起始坐标
* @param width,height: 区域大小
* @param size : 选择字体 12/16/24/32
* @param p : 字符串首地址
* @param color : 字符串的颜色;
* @retval 无
*/
void lcd_show_string(uint16_t x, uint16_t y, uint16_t width, uint16_t height, uint8_t size, char *p, uint16_t color)
{
uint8_t x0 = x;
width += x;
height += y;
while ((*p <= '~') && (*p >= ' ')) /* 判断是不是非法字符! */
{
if (x >= width)
{
x = x0;
y += size;
}
if (y >= height)break; /* 退出 */
lcd_show_char(x, y, *p, size, 0, color);
x += size / 2;
p++;
}
}
led.h
#ifndef __LCD_H
#define __LCD_H
#include "stdlib.h"
#include "./SYSTEM/sys/sys.h"
/******************************************************************************************/
/* LCD RST/WR/RD/BL/CS/RS 引脚 定义
* LCD_D0~D15,由于引脚太多,就不在这里定义了,直接在lcd_init里面修改.所以在移植的时候,除了改
* 这6个IO口, 还得改lcd_init里面的D0~D15所在的IO口.
*/
/* RESET 和系统复位脚共用 所以这里不用定义 RESET引脚 */
//#define LCD_RST_GPIO_PORT GPIOx
//#define LCD_RST_GPIO_PIN SYS_GPIO_PINx
//#define LCD_RST_GPIO_CLK_ENABLE() do{ __HAL_RCC_GPIOx_CLK_ENABLE(); }while(0) /* 所在IO口时钟使能 */
#define LCD_WR_GPIO_PORT GPIOD
#define LCD_WR_GPIO_PIN GPIO_PIN_5
#define LCD_WR_GPIO_CLK_ENABLE() do{ __HAL_RCC_GPIOD_CLK_ENABLE(); }while(0) /* 所在IO口时钟使能 */
#define LCD_RD_GPIO_PORT GPIOD
#define LCD_RD_GPIO_PIN GPIO_PIN_4
#define LCD_RD_GPIO_CLK_ENABLE() do{ __HAL_RCC_GPIOD_CLK_ENABLE(); }while(0) /* 所在IO口时钟使能 */
#define LCD_BL_GPIO_PORT GPIOB
#define LCD_BL_GPIO_PIN GPIO_PIN_0
#define LCD_BL_GPIO_CLK_ENABLE() do{ __HAL_RCC_GPIOB_CLK_ENABLE(); }while(0) /* 背光所在IO口时钟使能 */
/* LCD_CS(需要根据LCD_FSMC_NEX设置正确的IO口) 和 LCD_RS(需要根据LCD_FSMC_AX设置正确的IO口) 引脚 定义 */
#define LCD_CS_GPIO_PORT GPIOG
#define LCD_CS_GPIO_PIN GPIO_PIN_12
#define LCD_CS_GPIO_CLK_ENABLE() do{ __HAL_RCC_GPIOG_CLK_ENABLE(); }while(0) /* 所在IO口时钟使能 */
#define LCD_RS_GPIO_PORT GPIOG
#define LCD_RS_GPIO_PIN GPIO_PIN_0
#define LCD_RS_GPIO_CLK_ENABLE() do{ __HAL_RCC_GPIOG_CLK_ENABLE(); }while(0) /* 所在IO口时钟使能 */
/* FSMC相关参数 定义
* 注意: 我们默认是通过FSMC块1来连接LCD, 块1有4个片选: FSMC_NE1~4
*
* 修改LCD_FSMC_NEX, 对应的LCD_CS_GPIO相关设置也得改
* 修改LCD_FSMC_AX , 对应的LCD_RS_GPIO相关设置也得改
*/
#define LCD_FSMC_NEX 4 /* 使用FSMC_NE4接LCD_CS,取值范围只能是: 1~4 */
#define LCD_FSMC_AX 10 /* 使用FSMC_A10接LCD_RS,取值范围是: 0 ~ 25 */
#define LCD_FSMC_BCRX FSMC_Bank1->BTCR[(LCD_FSMC_NEX - 1) * 2] /* BCR寄存器,根据LCD_FSMC_NEX自动计算 */
#define LCD_FSMC_BTRX FSMC_Bank1->BTCR[(LCD_FSMC_NEX - 1) * 2 + 1] /* BTR寄存器,根据LCD_FSMC_NEX自动计算 */
#define LCD_FSMC_BWTRX FSMC_Bank1E->BWTR[(LCD_FSMC_NEX - 1) * 2] /* BWTR寄存器,根据LCD_FSMC_NEX自动计算 */
/******************************************************************************************/
/* LCD重要参数集 */
typedef struct
{
uint16_t width; /* LCD 宽度 */
uint16_t height; /* LCD 高度 */
uint16_t id; /* LCD ID */
uint8_t dir; /* 横屏还是竖屏控制：0，竖屏；1，横屏。 */
uint16_t wramcmd; /* 开始写gram指令 */
uint16_t setxcmd; /* 设置x坐标指令 */
uint16_t setycmd; /* 设置y坐标指令 */
} _lcd_dev;
/* LCD参数 */
extern _lcd_dev lcddev; /* 管理LCD重要参数 */
/* LCD的画笔颜色和背景色 */
extern uint32_t g_point_color; /* 默认红色 */
extern uint32_t g_back_color; /* 背景颜色.默认为白色 */
/* LCD背光控制 */
#define LCD_BL(x) do{ x ? \
HAL_GPIO_WritePin(LCD_BL_GPIO_PORT, LCD_BL_GPIO_PIN, GPIO_PIN_SET) : \
HAL_GPIO_WritePin(LCD_BL_GPIO_PORT, LCD_BL_GPIO_PIN, GPIO_PIN_RESET); \
}while(0)
/* LCD地址结构体 */
typedef struct
{
volatile uint16_t LCD_REG;
volatile uint16_t LCD_RAM;
} LCD_TypeDef;
/* LCD_BASE的详细解算方法:
* 我们一般使用FSMC的块1(BANK1)来驱动TFTLCD液晶屏(MCU屏), 块1地址范围总大小为256MB,均分成4块:
* 存储块1(FSMC_NE1)地址范围: 0X6000 0000 ~ 0X63FF FFFF
* 存储块2(FSMC_NE2)地址范围: 0X6400 0000 ~ 0X67FF FFFF
* 存储块3(FSMC_NE3)地址范围: 0X6800 0000 ~ 0X6BFF FFFF
* 存储块4(FSMC_NE4)地址范围: 0X6C00 0000 ~ 0X6FFF FFFF
*
* 我们需要根据硬件连接方式选择合适的片选(连接LCD_CS)和地址线(连接LCD_RS)
* 战舰F103开发板使用FSMC_NE4连接LCD_CS, FSMC_A10连接LCD_RS ,16位数据线,计算方法如下:
* 首先FSMC_NE4的基地址为: 0X6C00 0000; NEx的基址为(x=1/2/3/4): 0X6000 0000 + (0X400 0000 * (x - 1))
* FSMC_A10对应地址值: 2^10 * 2 = 0X800; FSMC_Ay对应的地址为(y = 0 ~ 25): 2^y * 2
*
* LCD->LCD_REG,对应LCD_RS = 0(LCD寄存器); LCD->LCD_RAM,对应LCD_RS = 1(LCD数据)
* 则 LCD->LCD_RAM的地址为: 0X6C00 0000 + 2^10 * 2 = 0X6C00 0800
* LCD->LCD_REG的地址可以为 LCD->LCD_RAM之外的任意地址.
* 由于我们使用结构体管理LCD_REG 和 LCD_RAM(REG在前,RAM在后,均为16位数据宽度)
* 因此 结构体的基地址(LCD_BASE) = LCD_RAM - 2 = 0X6C00 0800 -2
*
* 更加通用的计算公式为((片选脚FSMC_NEx)x=1/2/3/4, (RS接地址线FSMC_Ay)y=0~25):
* LCD_BASE = (0X6000 0000 + (0X400 0000 * (x - 1))) | (2^y * 2 -2)
* 等效于(使用移位操作)
* LCD_BASE = (0X6000 0000 + (0X400 0000 * (x - 1))) | ((1 << y) * 2 -2)
*/
#define LCD_BASE (uint32_t)((0X60000000 + (0X4000000 * (LCD_FSMC_NEX - 1))) | (((1 << LCD_FSMC_AX) * 2) -2))
#define LCD ((LCD_TypeDef *) LCD_BASE)
/******************************************************************************************/
/* LCD扫描方向和颜色 定义 */
/* 扫描方向定义 */
#define L2R_U2D 0 /* 从左到右,从上到下 */
#define L2R_D2U 1 /* 从左到右,从下到上 */
#define R2L_U2D 2 /* 从右到左,从上到下 */
#define R2L_D2U 3 /* 从右到左,从下到上 */
#define U2D_L2R 4 /* 从上到下,从左到右 */
#define U2D_R2L 5 /* 从上到下,从右到左 */
#define D2U_L2R 6 /* 从下到上,从左到右 */
#define D2U_R2L 7 /* 从下到上,从右到左 */
#define DFT_SCAN_DIR L2R_U2D /* 默认的扫描方向 */
/* 常用画笔颜色 */
#define WHITE 0xFFFF /* 白色 */
#define BLACK 0x0000 /* 黑色 */
#define RED 0xF800 /* 红色 */
#define GREEN 0x07E0 /* 绿色 */
#define BLUE 0x001F /* 蓝色 */
#define MAGENTA 0XF81F /* 品红色/紫红色 = BLUE + RED */
#define YELLOW 0XFFE0 /* 黄色 = GREEN + RED */
#define CYAN 0X07FF /* 青色 = GREEN + BLUE */
/* 非常用颜色 */
#define BROWN 0XBC40 /* 棕色 */
#define BRRED 0XFC07 /* 棕红色 */
#define GRAY 0X8430 /* 灰色 */
#define DARKBLUE 0X01CF /* 深蓝色 */
#define LIGHTBLUE 0X7D7C /* 浅蓝色 */
#define GRAYBLUE 0X5458 /* 灰蓝色 */
#define LIGHTGREEN 0X841F /* 浅绿色 */
#define LGRAY 0XC618 /* 浅灰色(PANNEL),窗体背景色 */
#define LGRAYBLUE 0XA651 /* 浅灰蓝色(中间层颜色) */
#define LBBLUE 0X2B12 /* 浅棕蓝色(选择条目的反色) */
/******************************************************************************************/
/* SSD1963相关配置参数(一般不用改) */
/* LCD分辨率设置 */
#define SSD_HOR_RESOLUTION 800 /* LCD水平分辨率 */
#define SSD_VER_RESOLUTION 480 /* LCD垂直分辨率 */
/* LCD驱动参数设置 */
#define SSD_HOR_PULSE_WIDTH 1 /* 水平脉宽 */
#define SSD_HOR_BACK_PORCH 46 /* 水平前廊 */
#define SSD_HOR_FRONT_PORCH 210 /* 水平后廊 */
#define SSD_VER_PULSE_WIDTH 1 /* 垂直脉宽 */
#define SSD_VER_BACK_PORCH 23 /* 垂直前廊 */
#define SSD_VER_FRONT_PORCH 22 /* 垂直前廊 */
/* 如下几个参数，自动计算 */
#define SSD_HT (SSD_HOR_RESOLUTION + SSD_HOR_BACK_PORCH + SSD_HOR_FRONT_PORCH)
#define SSD_HPS (SSD_HOR_BACK_PORCH)
#define SSD_VT (SSD_VER_RESOLUTION + SSD_VER_BACK_PORCH + SSD_VER_FRONT_PORCH)
#define SSD_VPS (SSD_VER_BACK_PORCH)
/******************************************************************************************/
/* 函数申明 */
void lcd_wr_data(volatile uint16_t data); /* LCD写数据 */
void lcd_wr_regno(volatile uint16_t regno); /* LCD写寄存器编号/地址 */
void lcd_write_reg(uint16_t regno, uint16_t data); /* LCD写寄存器的值 */
void lcd_init(void); /* 初始化LCD */
void lcd_display_on(void); /* 开显示 */
void lcd_display_off(void); /* 关显示 */
void lcd_scan_dir(uint8_t dir); /* 设置屏扫描方向 */
void lcd_display_dir(uint8_t dir); /* 设置屏幕显示方向 */
void lcd_ssd_backlight_set(uint8_t pwm); /* SSD1963 背光控制 */
void lcd_write_ram_prepare(void); /* 准备些GRAM */
void lcd_set_cursor(uint16_t x, uint16_t y); /* 设置光标 */
uint32_t lcd_read_point(uint16_t x, uint16_t y);/* 读点(32位颜色,兼容LTDC) */
void lcd_draw_point(uint16_t x, uint16_t y, uint32_t color);/* 画点(32位颜色,兼容LTDC) */
void lcd_clear(uint16_t color); /* LCD清屏 */
void lcd_fill_circle(uint16_t x, uint16_t y, uint16_t r, uint16_t color); /* 填充实心圆 */
void lcd_draw_circle(uint16_t x0, uint16_t y0, uint8_t r, uint16_t color); /* 画圆 */
void lcd_draw_hline(uint16_t x, uint16_t y, uint16_t len, uint16_t color); /* 画水平线 */
void lcd_set_window(uint16_t sx, uint16_t sy, uint16_t width, uint16_t height); /* 设置窗口 */
void lcd_fill(uint16_t sx, uint16_t sy, uint16_t ex, uint16_t ey, uint32_t color); /* 纯色填充矩形(32位颜色,兼容LTDC) */
void lcd_color_fill(uint16_t sx, uint16_t sy, uint16_t ex, uint16_t ey, uint16_t *color); /* 彩色填充矩形 */
void lcd_draw_line(uint16_t x1, uint16_t y1, uint16_t x2, uint16_t y2, uint16_t color); /* 画直线 */
void lcd_draw_rectangle(uint16_t x1, uint16_t y1, uint16_t x2, uint16_t y2, uint16_t color);/* 画矩形 */
void lcd_show_char(uint16_t x, uint16_t y, char chr, uint8_t size, uint8_t mode, uint16_t color); /* 显示一个字符 */
void lcd_show_num(uint16_t x, uint16_t y, uint32_t num, uint8_t len, uint8_t size, uint16_t color); /* 显示数字 */
void lcd_show_xnum(uint16_t x, uint16_t y, uint32_t num, uint8_t len, uint8_t size, uint8_t mode, uint16_t color); /* 扩展显示数字 */
void lcd_show_string(uint16_t x, uint16_t y, uint16_t width, uint16_t height, uint8_t size, char *p, uint16_t color); /* 显示字符串 */
#endif
led_ex.c
lcd_ex.c存放各个LCD驱动IC的寄存器初始化部分代码,以简化lcd.c,该.c文件
不直接加入到工程里面,只有lcd.c会用到,所以通过include的形式添加.(不要在
其他文件再包含该.c文件!!否则会报错!)
#include "./SYSTEM/delay/delay.h"
#include "./BSP/LCD/lcd.h"
/**
* @brief ST7789 寄存器初始化代码
* @param 无
* @retval 无
*/
void lcd_ex_st7789_reginit(void)
{
lcd_wr_regno(0x11);
delay_ms(120);
lcd_wr_regno(0x36);
lcd_wr_data(0x00);
lcd_wr_regno(0x3A);
lcd_wr_data(0X05);
lcd_wr_regno(0xB2);
lcd_wr_data(0x0C);
lcd_wr_data(0x0C);
lcd_wr_data(0x00);
lcd_wr_data(0x33);
lcd_wr_data(0x33);
lcd_wr_regno(0xB7);
lcd_wr_data(0x35);
lcd_wr_regno(0xBB); /* vcom */
lcd_wr_data(0x32); /* 30 */
lcd_wr_regno(0xC0);
lcd_wr_data(0x0C);
lcd_wr_regno(0xC2);
lcd_wr_data(0x01);
lcd_wr_regno(0xC3); /* vrh */
lcd_wr_data(0x10); /* 17 0D */
lcd_wr_regno(0xC4); /* vdv */
lcd_wr_data(0x20); /* 20 */
lcd_wr_regno(0xC6);
lcd_wr_data(0x0f);
lcd_wr_regno(0xD0);
lcd_wr_data(0xA4);
lcd_wr_data(0xA1);
lcd_wr_regno(0xE0); /* Set Gamma */
lcd_wr_data(0xd0);
lcd_wr_data(0x00);
lcd_wr_data(0x02);
lcd_wr_data(0x07);
lcd_wr_data(0x0a);
lcd_wr_data(0x28);
lcd_wr_data(0x32);
lcd_wr_data(0X44);
lcd_wr_data(0x42);
lcd_wr_data(0x06);
lcd_wr_data(0x0e);
lcd_wr_data(0x12);
lcd_wr_data(0x14);
lcd_wr_data(0x17);
lcd_wr_regno(0XE1); /* Set Gamma */
lcd_wr_data(0xd0);
lcd_wr_data(0x00);
lcd_wr_data(0x02);
lcd_wr_data(0x07);
lcd_wr_data(0x0a);
lcd_wr_data(0x28);
lcd_wr_data(0x31);
lcd_wr_data(0x54);
lcd_wr_data(0x47);
lcd_wr_data(0x0e);
lcd_wr_data(0x1c);
lcd_wr_data(0x17);
lcd_wr_data(0x1b);
lcd_wr_data(0x1e);
lcd_wr_regno(0x2A);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_data(0xef);
lcd_wr_regno(0x2B);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_data(0x01);
lcd_wr_data(0x3f);
lcd_wr_regno(0x29); /* display on */
}
/**
* @brief ILI9341寄存器初始化代码
* @param 无
* @retval 无
*/
void lcd_ex_ili9341_reginit(void)
{
lcd_wr_regno(0xCF);
lcd_wr_data(0x00);
lcd_wr_data(0xC1);
lcd_wr_data(0X30);
lcd_wr_regno(0xED);
lcd_wr_data(0x64);
lcd_wr_data(0x03);
lcd_wr_data(0X12);
lcd_wr_data(0X81);
lcd_wr_regno(0xE8);
lcd_wr_data(0x85);
lcd_wr_data(0x10);
lcd_wr_data(0x7A);
lcd_wr_regno(0xCB);
lcd_wr_data(0x39);
lcd_wr_data(0x2C);
lcd_wr_data(0x00);
lcd_wr_data(0x34);
lcd_wr_data(0x02);
lcd_wr_regno(0xF7);
lcd_wr_data(0x20);
lcd_wr_regno(0xEA);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_regno(0xC0); /* Power control */
lcd_wr_data(0x1B); /* VRH[5:0] */
lcd_wr_regno(0xC1); /* Power control */
lcd_wr_data(0x01); /* SAP[2:0];BT[3:0] */
lcd_wr_regno(0xC5); /* VCM control */
lcd_wr_data(0x30); /* 3F */
lcd_wr_data(0x30); /* 3C */
lcd_wr_regno(0xC7); /* VCM control2 */
lcd_wr_data(0XB7);
lcd_wr_regno(0x36); /* Memory Access Control */
lcd_wr_data(0x48);
lcd_wr_regno(0x3A);
lcd_wr_data(0x55);
lcd_wr_regno(0xB1);
lcd_wr_data(0x00);
lcd_wr_data(0x1A);
lcd_wr_regno(0xB6); /* Display Function Control */
lcd_wr_data(0x0A);
lcd_wr_data(0xA2);
lcd_wr_regno(0xF2); /* 3Gamma Function Disable */
lcd_wr_data(0x00);
lcd_wr_regno(0x26); /* Gamma curve selected */
lcd_wr_data(0x01);
lcd_wr_regno(0xE0); /* Set Gamma */
lcd_wr_data(0x0F);
lcd_wr_data(0x2A);
lcd_wr_data(0x28);
lcd_wr_data(0x08);
lcd_wr_data(0x0E);
lcd_wr_data(0x08);
lcd_wr_data(0x54);
lcd_wr_data(0XA9);
lcd_wr_data(0x43);
lcd_wr_data(0x0A);
lcd_wr_data(0x0F);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_regno(0XE1); /* Set Gamma */
lcd_wr_data(0x00);
lcd_wr_data(0x15);
lcd_wr_data(0x17);
lcd_wr_data(0x07);
lcd_wr_data(0x11);
lcd_wr_data(0x06);
lcd_wr_data(0x2B);
lcd_wr_data(0x56);
lcd_wr_data(0x3C);
lcd_wr_data(0x05);
lcd_wr_data(0x10);
lcd_wr_data(0x0F);
lcd_wr_data(0x3F);
lcd_wr_data(0x3F);
lcd_wr_data(0x0F);
lcd_wr_regno(0x2B);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_data(0x01);
lcd_wr_data(0x3f);
lcd_wr_regno(0x2A);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_data(0xef);
lcd_wr_regno(0x11); /* Exit Sleep */
delay_ms(120);
lcd_wr_regno(0x29); /* display on */
}
/**
* @brief NT35310寄存器初始化代码
* @param 无
* @retval 无
*/
void lcd_ex_nt35310_reginit(void)
{
lcd_wr_regno(0xED);
lcd_wr_data(0x01);
lcd_wr_data(0xFE);
lcd_wr_regno(0xEE);
lcd_wr_data(0xDE);
lcd_wr_data(0x21);
lcd_wr_regno(0xF1);
lcd_wr_data(0x01);
lcd_wr_regno(0xDF);
lcd_wr_data(0x10);
/* VCOMvoltage */
lcd_wr_regno(0xC4);
lcd_wr_data(0x8F); /* 5f */
lcd_wr_regno(0xC6);
lcd_wr_data(0x00);
lcd_wr_data(0xE2);
lcd_wr_data(0xE2);
lcd_wr_data(0xE2);
lcd_wr_regno(0xBF);
lcd_wr_data(0xAA);
lcd_wr_regno(0xB0);
lcd_wr_data(0x0D);
lcd_wr_data(0x00);
lcd_wr_data(0x0D);
lcd_wr_data(0x00);
lcd_wr_data(0x11);
lcd_wr_data(0x00);
lcd_wr_data(0x19);
lcd_wr_data(0x00);
lcd_wr_data(0x21);
lcd_wr_data(0x00);
lcd_wr_data(0x2D);
lcd_wr_data(0x00);
lcd_wr_data(0x3D);
lcd_wr_data(0x00);
lcd_wr_data(0x5D);
lcd_wr_data(0x00);
lcd_wr_data(0x5D);
lcd_wr_data(0x00);
lcd_wr_regno(0xB1);
lcd_wr_data(0x80);
lcd_wr_data(0x00);
lcd_wr_data(0x8B);
lcd_wr_data(0x00);
lcd_wr_data(0x96);
lcd_wr_data(0x00);
lcd_wr_regno(0xB2);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_data(0x02);
lcd_wr_data(0x00);
lcd_wr_data(0x03);
lcd_wr_data(0x00);
lcd_wr_regno(0xB3);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_regno(0xB4);
lcd_wr_data(0x8B);
lcd_wr_data(0x00);
lcd_wr_data(0x96);
lcd_wr_data(0x00);
lcd_wr_data(0xA1);
lcd_wr_data(0x00);
lcd_wr_regno(0xB5);
lcd_wr_data(0x02);
lcd_wr_data(0x00);
lcd_wr_data(0x03);
lcd_wr_data(0x00);
lcd_wr_data(0x04);
lcd_wr_data(0x00);
lcd_wr_regno(0xB6);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_regno(0xB7);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_data(0x3F);
lcd_wr_data(0x00);
lcd_wr_data(0x5E);
lcd_wr_data(0x00);
lcd_wr_data(0x64);
lcd_wr_data(0x00);
lcd_wr_data(0x8C);
lcd_wr_data(0x00);
lcd_wr_data(0xAC);
lcd_wr_data(0x00);
lcd_wr_data(0xDC);
lcd_wr_data(0x00);
lcd_wr_data(0x70);
lcd_wr_data(0x00);
lcd_wr_data(0x90);
lcd_wr_data(0x00);
lcd_wr_data(0xEB);
lcd_wr_data(0x00);
lcd_wr_data(0xDC);
lcd_wr_data(0x00);
lcd_wr_regno(0xB8);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_regno(0xBA);
lcd_wr_data(0x24);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_regno(0xC1);
lcd_wr_data(0x20);
lcd_wr_data(0x00);
lcd_wr_data(0x54);
lcd_wr_data(0x00);
lcd_wr_data(0xFF);
lcd_wr_data(0x00);
lcd_wr_regno(0xC2);
lcd_wr_data(0x0A);
lcd_wr_data(0x00);
lcd_wr_data(0x04);
lcd_wr_data(0x00);
lcd_wr_regno(0xC3);
lcd_wr_data(0x3C);
lcd_wr_data(0x00);
lcd_wr_data(0x3A);
lcd_wr_data(0x00);
lcd_wr_data(0x39);
lcd_wr_data(0x00);
lcd_wr_data(0x37);
lcd_wr_data(0x00);
lcd_wr_data(0x3C);
lcd_wr_data(0x00);
lcd_wr_data(0x36);
lcd_wr_data(0x00);
lcd_wr_data(0x32);
lcd_wr_data(0x00);
lcd_wr_data(0x2F);
lcd_wr_data(0x00);
lcd_wr_data(0x2C);
lcd_wr_data(0x00);
lcd_wr_data(0x29);
lcd_wr_data(0x00);
lcd_wr_data(0x26);
lcd_wr_data(0x00);
lcd_wr_data(0x24);
lcd_wr_data(0x00);
lcd_wr_data(0x24);
lcd_wr_data(0x00);
lcd_wr_data(0x23);
lcd_wr_data(0x00);
lcd_wr_data(0x3C);
lcd_wr_data(0x00);
lcd_wr_data(0x36);
lcd_wr_data(0x00);
lcd_wr_data(0x32);
lcd_wr_data(0x00);
lcd_wr_data(0x2F);
lcd_wr_data(0x00);
lcd_wr_data(0x2C);
lcd_wr_data(0x00);
lcd_wr_data(0x29);
lcd_wr_data(0x00);
lcd_wr_data(0x26);
lcd_wr_data(0x00);
lcd_wr_data(0x24);
lcd_wr_data(0x00);
lcd_wr_data(0x24);
lcd_wr_data(0x00);
lcd_wr_data(0x23);
lcd_wr_data(0x00);
lcd_wr_regno(0xC4);
lcd_wr_data(0x62);
lcd_wr_data(0x00);
lcd_wr_data(0x05);
lcd_wr_data(0x00);
lcd_wr_data(0x84);
lcd_wr_data(0x00);
lcd_wr_data(0xF0);
lcd_wr_data(0x00);
lcd_wr_data(0x18);
lcd_wr_data(0x00);
lcd_wr_data(0xA4);
lcd_wr_data(0x00);
lcd_wr_data(0x18);
lcd_wr_data(0x00);
lcd_wr_data(0x50);
lcd_wr_data(0x00);
lcd_wr_data(0x0C);
lcd_wr_data(0x00);
lcd_wr_data(0x17);
lcd_wr_data(0x00);
lcd_wr_data(0x95);
lcd_wr_data(0x00);
lcd_wr_data(0xF3);
lcd_wr_data(0x00);
lcd_wr_data(0xE6);
lcd_wr_data(0x00);
lcd_wr_regno(0xC5);
lcd_wr_data(0x32);
lcd_wr_data(0x00);
lcd_wr_data(0x44);
lcd_wr_data(0x00);
lcd_wr_data(0x65);
lcd_wr_data(0x00);
lcd_wr_data(0x76);
lcd_wr_data(0x00);
lcd_wr_data(0x88);
lcd_wr_data(0x00);
lcd_wr_regno(0xC6);
lcd_wr_data(0x20);
lcd_wr_data(0x00);
lcd_wr_data(0x17);
lcd_wr_data(0x00);
lcd_wr_data(0x01);
lcd_wr_data(0x00);
lcd_wr_regno(0xC7);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_regno(0xC8);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_regno(0xC9);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_regno(0xE0);
lcd_wr_data(0x16);
lcd_wr_data(0x00);
lcd_wr_data(0x1C);
lcd_wr_data(0x00);
lcd_wr_data(0x21);
lcd_wr_data(0x00);
lcd_wr_data(0x36);
lcd_wr_data(0x00);
lcd_wr_data(0x46);
lcd_wr_data(0x00);
lcd_wr_data(0x52);
lcd_wr_data(0x00);
lcd_wr_data(0x64);
lcd_wr_data(0x00);
lcd_wr_data(0x7A);
lcd_wr_data(0x00);
lcd_wr_data(0x8B);
lcd_wr_data(0x00);
lcd_wr_data(0x99);
lcd_wr_data(0x00);
lcd_wr_data(0xA8);
lcd_wr_data(0x00);
lcd_wr_data(0xB9);
lcd_wr_data(0x00);
lcd_wr_data(0xC4);
lcd_wr_data(0x00);
lcd_wr_data(0xCA);
lcd_wr_data(0x00);
lcd_wr_data(0xD2);
lcd_wr_data(0x00);
lcd_wr_data(0xD9);
lcd_wr_data(0x00);
lcd_wr_data(0xE0);
lcd_wr_data(0x00);
lcd_wr_data(0xF3);
lcd_wr_data(0x00);
lcd_wr_regno(0xE1);
lcd_wr_data(0x16);
lcd_wr_data(0x00);
lcd_wr_data(0x1C);
lcd_wr_data(0x00);
lcd_wr_data(0x22);
lcd_wr_data(0x00);
lcd_wr_data(0x36);
lcd_wr_data(0x00);
lcd_wr_data(0x45);
lcd_wr_data(0x00);
lcd_wr_data(0x52);
lcd_wr_data(0x00);
lcd_wr_data(0x64);
lcd_wr_data(0x00);
lcd_wr_data(0x7A);
lcd_wr_data(0x00);
lcd_wr_data(0x8B);
lcd_wr_data(0x00);
lcd_wr_data(0x99);
lcd_wr_data(0x00);
lcd_wr_data(0xA8);
lcd_wr_data(0x00);
lcd_wr_data(0xB9);
lcd_wr_data(0x00);
lcd_wr_data(0xC4);
lcd_wr_data(0x00);
lcd_wr_data(0xCA);
lcd_wr_data(0x00);
lcd_wr_data(0xD2);
lcd_wr_data(0x00);
lcd_wr_data(0xD8);
lcd_wr_data(0x00);
lcd_wr_data(0xE0);
lcd_wr_data(0x00);
lcd_wr_data(0xF3);
lcd_wr_data(0x00);
lcd_wr_regno(0xE2);
lcd_wr_data(0x05);
lcd_wr_data(0x00);
lcd_wr_data(0x0B);
lcd_wr_data(0x00);
lcd_wr_data(0x1B);
lcd_wr_data(0x00);
lcd_wr_data(0x34);
lcd_wr_data(0x00);
lcd_wr_data(0x44);
lcd_wr_data(0x00);
lcd_wr_data(0x4F);
lcd_wr_data(0x00);
lcd_wr_data(0x61);
lcd_wr_data(0x00);
lcd_wr_data(0x79);
lcd_wr_data(0x00);
lcd_wr_data(0x88);
lcd_wr_data(0x00);
lcd_wr_data(0x97);
lcd_wr_data(0x00);
lcd_wr_data(0xA6);
lcd_wr_data(0x00);
lcd_wr_data(0xB7);
lcd_wr_data(0x00);
lcd_wr_data(0xC2);
lcd_wr_data(0x00);
lcd_wr_data(0xC7);
lcd_wr_data(0x00);
lcd_wr_data(0xD1);
lcd_wr_data(0x00);
lcd_wr_data(0xD6);
lcd_wr_data(0x00);
lcd_wr_data(0xDD);
lcd_wr_data(0x00);
lcd_wr_data(0xF3);
lcd_wr_data(0x00);
lcd_wr_regno(0xE3);
lcd_wr_data(0x05);
lcd_wr_data(0x00);
lcd_wr_data(0xA);
lcd_wr_data(0x00);
lcd_wr_data(0x1C);
lcd_wr_data(0x00);
lcd_wr_data(0x33);
lcd_wr_data(0x00);
lcd_wr_data(0x44);
lcd_wr_data(0x00);
lcd_wr_data(0x50);
lcd_wr_data(0x00);
lcd_wr_data(0x62);
lcd_wr_data(0x00);
lcd_wr_data(0x78);
lcd_wr_data(0x00);
lcd_wr_data(0x88);
lcd_wr_data(0x00);
lcd_wr_data(0x97);
lcd_wr_data(0x00);
lcd_wr_data(0xA6);
lcd_wr_data(0x00);
lcd_wr_data(0xB7);
lcd_wr_data(0x00);
lcd_wr_data(0xC2);
lcd_wr_data(0x00);
lcd_wr_data(0xC7);
lcd_wr_data(0x00);
lcd_wr_data(0xD1);
lcd_wr_data(0x00);
lcd_wr_data(0xD5);
lcd_wr_data(0x00);
lcd_wr_data(0xDD);
lcd_wr_data(0x00);
lcd_wr_data(0xF3);
lcd_wr_data(0x00);
lcd_wr_regno(0xE4);
lcd_wr_data(0x01);
lcd_wr_data(0x00);
lcd_wr_data(0x01);
lcd_wr_data(0x00);
lcd_wr_data(0x02);
lcd_wr_data(0x00);
lcd_wr_data(0x2A);
lcd_wr_data(0x00);
lcd_wr_data(0x3C);
lcd_wr_data(0x00);
lcd_wr_data(0x4B);
lcd_wr_data(0x00);
lcd_wr_data(0x5D);
lcd_wr_data(0x00);
lcd_wr_data(0x74);
lcd_wr_data(0x00);
lcd_wr_data(0x84);
lcd_wr_data(0x00);
lcd_wr_data(0x93);
lcd_wr_data(0x00);
lcd_wr_data(0xA2);
lcd_wr_data(0x00);
lcd_wr_data(0xB3);
lcd_wr_data(0x00);
lcd_wr_data(0xBE);
lcd_wr_data(0x00);
lcd_wr_data(0xC4);
lcd_wr_data(0x00);
lcd_wr_data(0xCD);
lcd_wr_data(0x00);
lcd_wr_data(0xD3);
lcd_wr_data(0x00);
lcd_wr_data(0xDD);
lcd_wr_data(0x00);
lcd_wr_data(0xF3);
lcd_wr_data(0x00);
lcd_wr_regno(0xE5);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_data(0x02);
lcd_wr_data(0x00);
lcd_wr_data(0x29);
lcd_wr_data(0x00);
lcd_wr_data(0x3C);
lcd_wr_data(0x00);
lcd_wr_data(0x4B);
lcd_wr_data(0x00);
lcd_wr_data(0x5D);
lcd_wr_data(0x00);
lcd_wr_data(0x74);
lcd_wr_data(0x00);
lcd_wr_data(0x84);
lcd_wr_data(0x00);
lcd_wr_data(0x93);
lcd_wr_data(0x00);
lcd_wr_data(0xA2);
lcd_wr_data(0x00);
lcd_wr_data(0xB3);
lcd_wr_data(0x00);
lcd_wr_data(0xBE);
lcd_wr_data(0x00);
lcd_wr_data(0xC4);
lcd_wr_data(0x00);
lcd_wr_data(0xCD);
lcd_wr_data(0x00);
lcd_wr_data(0xD3);
lcd_wr_data(0x00);
lcd_wr_data(0xDC);
lcd_wr_data(0x00);
lcd_wr_data(0xF3);
lcd_wr_data(0x00);
lcd_wr_regno(0xE6);
lcd_wr_data(0x11);
lcd_wr_data(0x00);
lcd_wr_data(0x34);
lcd_wr_data(0x00);
lcd_wr_data(0x56);
lcd_wr_data(0x00);
lcd_wr_data(0x76);
lcd_wr_data(0x00);
lcd_wr_data(0x77);
lcd_wr_data(0x00);
lcd_wr_data(0x66);
lcd_wr_data(0x00);
lcd_wr_data(0x88);
lcd_wr_data(0x00);
lcd_wr_data(0x99);
lcd_wr_data(0x00);
lcd_wr_data(0xBB);
lcd_wr_data(0x00);
lcd_wr_data(0x99);
lcd_wr_data(0x00);
lcd_wr_data(0x66);
lcd_wr_data(0x00);
lcd_wr_data(0x55);
lcd_wr_data(0x00);
lcd_wr_data(0x55);
lcd_wr_data(0x00);
lcd_wr_data(0x45);
lcd_wr_data(0x00);
lcd_wr_data(0x43);
lcd_wr_data(0x00);
lcd_wr_data(0x44);
lcd_wr_data(0x00);
lcd_wr_regno(0xE7);
lcd_wr_data(0x32);
lcd_wr_data(0x00);
lcd_wr_data(0x55);
lcd_wr_data(0x00);
lcd_wr_data(0x76);
lcd_wr_data(0x00);
lcd_wr_data(0x66);
lcd_wr_data(0x00);
lcd_wr_data(0x67);
lcd_wr_data(0x00);
lcd_wr_data(0x67);
lcd_wr_data(0x00);
lcd_wr_data(0x87);
lcd_wr_data(0x00);
lcd_wr_data(0x99);
lcd_wr_data(0x00);
lcd_wr_data(0xBB);
lcd_wr_data(0x00);
lcd_wr_data(0x99);
lcd_wr_data(0x00);
lcd_wr_data(0x77);
lcd_wr_data(0x00);
lcd_wr_data(0x44);
lcd_wr_data(0x00);
lcd_wr_data(0x56);
lcd_wr_data(0x00);
lcd_wr_data(0x23);
lcd_wr_data(0x00);
lcd_wr_data(0x33);
lcd_wr_data(0x00);
lcd_wr_data(0x45);
lcd_wr_data(0x00);
lcd_wr_regno(0xE8);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_data(0x99);
lcd_wr_data(0x00);
lcd_wr_data(0x87);
lcd_wr_data(0x00);
lcd_wr_data(0x88);
lcd_wr_data(0x00);
lcd_wr_data(0x77);
lcd_wr_data(0x00);
lcd_wr_data(0x66);
lcd_wr_data(0x00);
lcd_wr_data(0x88);
lcd_wr_data(0x00);
lcd_wr_data(0xAA);
lcd_wr_data(0x00);
lcd_wr_data(0xBB);
lcd_wr_data(0x00);
lcd_wr_data(0x99);
lcd_wr_data(0x00);
lcd_wr_data(0x66);
lcd_wr_data(0x00);
lcd_wr_data(0x55);
lcd_wr_data(0x00);
lcd_wr_data(0x55);
lcd_wr_data(0x00);
lcd_wr_data(0x44);
lcd_wr_data(0x00);
lcd_wr_data(0x44);
lcd_wr_data(0x00);
lcd_wr_data(0x55);
lcd_wr_data(0x00);
lcd_wr_regno(0xE9);
lcd_wr_data(0xAA);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_regno(0x00);
lcd_wr_data(0xAA);
lcd_wr_regno(0xCF);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_regno(0xF0);
lcd_wr_data(0x00);
lcd_wr_data(0x50);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_regno(0xF3);
lcd_wr_data(0x00);
lcd_wr_regno(0xF9);
lcd_wr_data(0x06);
lcd_wr_data(0x10);
lcd_wr_data(0x29);
lcd_wr_data(0x00);
lcd_wr_regno(0x3A);
lcd_wr_data(0x55); /* 66 */
lcd_wr_regno(0x11);
delay_ms(100);
lcd_wr_regno(0x29);
lcd_wr_regno(0x35);
lcd_wr_data(0x00);
lcd_wr_regno(0x51);
lcd_wr_data(0xFF);
lcd_wr_regno(0x53);
lcd_wr_data(0x2C);
lcd_wr_regno(0x55);
lcd_wr_data(0x82);
lcd_wr_regno(0x2c);
}
/**
* @brief ST7796寄存器初始化代码
* @param 无
* @retval 无
*/
void lcd_ex_st7796_reginit(void)
{
lcd_wr_regno(0x11);
delay_ms(120);
lcd_wr_regno(0x36); /* Memory Data Access Control MY,MX~~ */
lcd_wr_data(0x48);
lcd_wr_regno(0x3A);
lcd_wr_data(0x55);
lcd_wr_regno(0xF0);
lcd_wr_data(0xC3);
lcd_wr_regno(0xF0);
lcd_wr_data(0x96);
lcd_wr_regno(0xB4);
lcd_wr_data(0x01);
lcd_wr_regno(0xB6); /* Display Function Control */
lcd_wr_data(0x0A);
lcd_wr_data(0xA2);
lcd_wr_regno(0xB7);
lcd_wr_data(0xC6);
lcd_wr_regno(0xB9);
lcd_wr_data(0x02);
lcd_wr_data(0xE0);
lcd_wr_regno(0xC0);
lcd_wr_data(0x80);
lcd_wr_data(0x16);
lcd_wr_regno(0xC1);
lcd_wr_data(0x19);
lcd_wr_regno(0xC2);
lcd_wr_data(0xA7);
lcd_wr_regno(0xC5);
lcd_wr_data(0x16);
lcd_wr_regno(0xE8);
lcd_wr_data(0x40);
lcd_wr_data(0x8A);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_data(0x29);
lcd_wr_data(0x19);
lcd_wr_data(0xA5);
lcd_wr_data(0x33);
lcd_wr_regno(0xE0);
lcd_wr_data(0xF0);
lcd_wr_data(0x07);
lcd_wr_data(0x0D);
lcd_wr_data(0x04);
lcd_wr_data(0x05);
lcd_wr_data(0x14);
lcd_wr_data(0x36);
lcd_wr_data(0x54);
lcd_wr_data(0x4C);
lcd_wr_data(0x38);
lcd_wr_data(0x13);
lcd_wr_data(0x14);
lcd_wr_data(0x2E);
lcd_wr_data(0x34);
lcd_wr_regno(0xE1);
lcd_wr_data(0xF0);
lcd_wr_data(0x10);
lcd_wr_data(0x14);
lcd_wr_data(0x0E);
lcd_wr_data(0x0C);
lcd_wr_data(0x08);
lcd_wr_data(0x35);
lcd_wr_data(0x44);
lcd_wr_data(0x4C);
lcd_wr_data(0x26);
lcd_wr_data(0x10);
lcd_wr_data(0x12);
lcd_wr_data(0x2C);
lcd_wr_data(0x32);
lcd_wr_regno(0xF0);
lcd_wr_data(0x3C);
lcd_wr_regno(0xF0);
lcd_wr_data(0x69);
delay_ms(120);
lcd_wr_regno(0x21);
lcd_wr_regno(0x29);
}
/**
* @brief NT35510寄存器初始化代码
* @param 无
* @retval 无
*/
void lcd_ex_nt35510_reginit(void)
{
lcd_write_reg(0xF000, 0x55);
lcd_write_reg(0xF001, 0xAA);
lcd_write_reg(0xF002, 0x52);
lcd_write_reg(0xF003, 0x08);
lcd_write_reg(0xF004, 0x01);
/* AVDD Set AVDD 5.2V */
lcd_write_reg(0xB000, 0x0D);
lcd_write_reg(0xB001, 0x0D);
lcd_write_reg(0xB002, 0x0D);
/* AVDD ratio */
lcd_write_reg(0xB600, 0x34);
lcd_write_reg(0xB601, 0x34);
lcd_write_reg(0xB602, 0x34);
/* AVEE -5.2V */
lcd_write_reg(0xB100, 0x0D);
lcd_write_reg(0xB101, 0x0D);
lcd_write_reg(0xB102, 0x0D);
/* AVEE ratio */
lcd_write_reg(0xB700, 0x34);
lcd_write_reg(0xB701, 0x34);
lcd_write_reg(0xB702, 0x34);
/* VCL -2.5V */
lcd_write_reg(0xB200, 0x00);
lcd_write_reg(0xB201, 0x00);
lcd_write_reg(0xB202, 0x00);
/* VCL ratio */
lcd_write_reg(0xB800, 0x24);
lcd_write_reg(0xB801, 0x24);
lcd_write_reg(0xB802, 0x24);
/* VGH 15V (Free pump) */
lcd_write_reg(0xBF00, 0x01);
lcd_write_reg(0xB300, 0x0F);
lcd_write_reg(0xB301, 0x0F);
lcd_write_reg(0xB302, 0x0F);
/* VGH ratio */
lcd_write_reg(0xB900, 0x34);
lcd_write_reg(0xB901, 0x34);
lcd_write_reg(0xB902, 0x34);
/* VGL_REG -10V */
lcd_write_reg(0xB500, 0x08);
lcd_write_reg(0xB501, 0x08);
lcd_write_reg(0xB502, 0x08);
lcd_write_reg(0xC200, 0x03);
/* VGLX ratio */
lcd_write_reg(0xBA00, 0x24);
lcd_write_reg(0xBA01, 0x24);
lcd_write_reg(0xBA02, 0x24);
/* VGMP/VGSP 4.5V/0V */
lcd_write_reg(0xBC00, 0x00);
lcd_write_reg(0xBC01, 0x78);
lcd_write_reg(0xBC02, 0x00);
/* VGMN/VGSN -4.5V/0V */
lcd_write_reg(0xBD00, 0x00);
lcd_write_reg(0xBD01, 0x78);
lcd_write_reg(0xBD02, 0x00);
/* VCOM */
lcd_write_reg(0xBE00, 0x00);
lcd_write_reg(0xBE01, 0x64);
/* Gamma Setting */
lcd_write_reg(0xD100, 0x00);
lcd_write_reg(0xD101, 0x33);
lcd_write_reg(0xD102, 0x00);
lcd_write_reg(0xD103, 0x34);
lcd_write_reg(0xD104, 0x00);
lcd_write_reg(0xD105, 0x3A);
lcd_write_reg(0xD106, 0x00);
lcd_write_reg(0xD107, 0x4A);
lcd_write_reg(0xD108, 0x00);
lcd_write_reg(0xD109, 0x5C);
lcd_write_reg(0xD10A, 0x00);
lcd_write_reg(0xD10B, 0x81);
lcd_write_reg(0xD10C, 0x00);
lcd_write_reg(0xD10D, 0xA6);
lcd_write_reg(0xD10E, 0x00);
lcd_write_reg(0xD10F, 0xE5);
lcd_write_reg(0xD110, 0x01);
lcd_write_reg(0xD111, 0x13);
lcd_write_reg(0xD112, 0x01);
lcd_write_reg(0xD113, 0x54);
lcd_write_reg(0xD114, 0x01);
lcd_write_reg(0xD115, 0x82);
lcd_write_reg(0xD116, 0x01);
lcd_write_reg(0xD117, 0xCA);
lcd_write_reg(0xD118, 0x02);
lcd_write_reg(0xD119, 0x00);
lcd_write_reg(0xD11A, 0x02);
lcd_write_reg(0xD11B, 0x01);
lcd_write_reg(0xD11C, 0x02);
lcd_write_reg(0xD11D, 0x34);
lcd_write_reg(0xD11E, 0x02);
lcd_write_reg(0xD11F, 0x67);
lcd_write_reg(0xD120, 0x02);
lcd_write_reg(0xD121, 0x84);
lcd_write_reg(0xD122, 0x02);
lcd_write_reg(0xD123, 0xA4);
lcd_write_reg(0xD124, 0x02);
lcd_write_reg(0xD125, 0xB7);
lcd_write_reg(0xD126, 0x02);
lcd_write_reg(0xD127, 0xCF);
lcd_write_reg(0xD128, 0x02);
lcd_write_reg(0xD129, 0xDE);
lcd_write_reg(0xD12A, 0x02);
lcd_write_reg(0xD12B, 0xF2);
lcd_write_reg(0xD12C, 0x02);
lcd_write_reg(0xD12D, 0xFE);
lcd_write_reg(0xD12E, 0x03);
lcd_write_reg(0xD12F, 0x10);
lcd_write_reg(0xD130, 0x03);
lcd_write_reg(0xD131, 0x33);
lcd_write_reg(0xD132, 0x03);
lcd_write_reg(0xD133, 0x6D);
lcd_write_reg(0xD200, 0x00);
lcd_write_reg(0xD201, 0x33);
lcd_write_reg(0xD202, 0x00);
lcd_write_reg(0xD203, 0x34);
lcd_write_reg(0xD204, 0x00);
lcd_write_reg(0xD205, 0x3A);
lcd_write_reg(0xD206, 0x00);
lcd_write_reg(0xD207, 0x4A);
lcd_write_reg(0xD208, 0x00);
lcd_write_reg(0xD209, 0x5C);
lcd_write_reg(0xD20A, 0x00);
lcd_write_reg(0xD20B, 0x81);
lcd_write_reg(0xD20C, 0x00);
lcd_write_reg(0xD20D, 0xA6);
lcd_write_reg(0xD20E, 0x00);
lcd_write_reg(0xD20F, 0xE5);
lcd_write_reg(0xD210, 0x01);
lcd_write_reg(0xD211, 0x13);
lcd_write_reg(0xD212, 0x01);
lcd_write_reg(0xD213, 0x54);
lcd_write_reg(0xD214, 0x01);
lcd_write_reg(0xD215, 0x82);
lcd_write_reg(0xD216, 0x01);
lcd_write_reg(0xD217, 0xCA);
lcd_write_reg(0xD218, 0x02);
lcd_write_reg(0xD219, 0x00);
lcd_write_reg(0xD21A, 0x02);
lcd_write_reg(0xD21B, 0x01);
lcd_write_reg(0xD21C, 0x02);
lcd_write_reg(0xD21D, 0x34);
lcd_write_reg(0xD21E, 0x02);
lcd_write_reg(0xD21F, 0x67);
lcd_write_reg(0xD220, 0x02);
lcd_write_reg(0xD221, 0x84);
lcd_write_reg(0xD222, 0x02);
lcd_write_reg(0xD223, 0xA4);
lcd_write_reg(0xD224, 0x02);
lcd_write_reg(0xD225, 0xB7);
lcd_write_reg(0xD226, 0x02);
lcd_write_reg(0xD227, 0xCF);
lcd_write_reg(0xD228, 0x02);
lcd_write_reg(0xD229, 0xDE);
lcd_write_reg(0xD22A, 0x02);
lcd_write_reg(0xD22B, 0xF2);
lcd_write_reg(0xD22C, 0x02);
lcd_write_reg(0xD22D, 0xFE);
lcd_write_reg(0xD22E, 0x03);
lcd_write_reg(0xD22F, 0x10);
lcd_write_reg(0xD230, 0x03);
lcd_write_reg(0xD231, 0x33);
lcd_write_reg(0xD232, 0x03);
lcd_write_reg(0xD233, 0x6D);
lcd_write_reg(0xD300, 0x00);
lcd_write_reg(0xD301, 0x33);
lcd_write_reg(0xD302, 0x00);
lcd_write_reg(0xD303, 0x34);
lcd_write_reg(0xD304, 0x00);
lcd_write_reg(0xD305, 0x3A);
lcd_write_reg(0xD306, 0x00);
lcd_write_reg(0xD307, 0x4A);
lcd_write_reg(0xD308, 0x00);
lcd_write_reg(0xD309, 0x5C);
lcd_write_reg(0xD30A, 0x00);
lcd_write_reg(0xD30B, 0x81);
lcd_write_reg(0xD30C, 0x00);
lcd_write_reg(0xD30D, 0xA6);
lcd_write_reg(0xD30E, 0x00);
lcd_write_reg(0xD30F, 0xE5);
lcd_write_reg(0xD310, 0x01);
lcd_write_reg(0xD311, 0x13);
lcd_write_reg(0xD312, 0x01);
lcd_write_reg(0xD313, 0x54);
lcd_write_reg(0xD314, 0x01);
lcd_write_reg(0xD315, 0x82);
lcd_write_reg(0xD316, 0x01);
lcd_write_reg(0xD317, 0xCA);
lcd_write_reg(0xD318, 0x02);
lcd_write_reg(0xD319, 0x00);
lcd_write_reg(0xD31A, 0x02);
lcd_write_reg(0xD31B, 0x01);
lcd_write_reg(0xD31C, 0x02);
lcd_write_reg(0xD31D, 0x34);
lcd_write_reg(0xD31E, 0x02);
lcd_write_reg(0xD31F, 0x67);
lcd_write_reg(0xD320, 0x02);
lcd_write_reg(0xD321, 0x84);
lcd_write_reg(0xD322, 0x02);
lcd_write_reg(0xD323, 0xA4);
lcd_write_reg(0xD324, 0x02);
lcd_write_reg(0xD325, 0xB7);
lcd_write_reg(0xD326, 0x02);
lcd_write_reg(0xD327, 0xCF);
lcd_write_reg(0xD328, 0x02);
lcd_write_reg(0xD329, 0xDE);
lcd_write_reg(0xD32A, 0x02);
lcd_write_reg(0xD32B, 0xF2);
lcd_write_reg(0xD32C, 0x02);
lcd_write_reg(0xD32D, 0xFE);
lcd_write_reg(0xD32E, 0x03);
lcd_write_reg(0xD32F, 0x10);
lcd_write_reg(0xD330, 0x03);
lcd_write_reg(0xD331, 0x33);
lcd_write_reg(0xD332, 0x03);
lcd_write_reg(0xD333, 0x6D);
lcd_write_reg(0xD400, 0x00);
lcd_write_reg(0xD401, 0x33);
lcd_write_reg(0xD402, 0x00);
lcd_write_reg(0xD403, 0x34);
lcd_write_reg(0xD404, 0x00);
lcd_write_reg(0xD405, 0x3A);
lcd_write_reg(0xD406, 0x00);
lcd_write_reg(0xD407, 0x4A);
lcd_write_reg(0xD408, 0x00);
lcd_write_reg(0xD409, 0x5C);
lcd_write_reg(0xD40A, 0x00);
lcd_write_reg(0xD40B, 0x81);
lcd_write_reg(0xD40C, 0x00);
lcd_write_reg(0xD40D, 0xA6);
lcd_write_reg(0xD40E, 0x00);
lcd_write_reg(0xD40F, 0xE5);
lcd_write_reg(0xD410, 0x01);
lcd_write_reg(0xD411, 0x13);
lcd_write_reg(0xD412, 0x01);
lcd_write_reg(0xD413, 0x54);
lcd_write_reg(0xD414, 0x01);
lcd_write_reg(0xD415, 0x82);
lcd_write_reg(0xD416, 0x01);
lcd_write_reg(0xD417, 0xCA);
lcd_write_reg(0xD418, 0x02);
lcd_write_reg(0xD419, 0x00);
lcd_write_reg(0xD41A, 0x02);
lcd_write_reg(0xD41B, 0x01);
lcd_write_reg(0xD41C, 0x02);
lcd_write_reg(0xD41D, 0x34);
lcd_write_reg(0xD41E, 0x02);
lcd_write_reg(0xD41F, 0x67);
lcd_write_reg(0xD420, 0x02);
lcd_write_reg(0xD421, 0x84);
lcd_write_reg(0xD422, 0x02);
lcd_write_reg(0xD423, 0xA4);
lcd_write_reg(0xD424, 0x02);
lcd_write_reg(0xD425, 0xB7);
lcd_write_reg(0xD426, 0x02);
lcd_write_reg(0xD427, 0xCF);
lcd_write_reg(0xD428, 0x02);
lcd_write_reg(0xD429, 0xDE);
lcd_write_reg(0xD42A, 0x02);
lcd_write_reg(0xD42B, 0xF2);
lcd_write_reg(0xD42C, 0x02);
lcd_write_reg(0xD42D, 0xFE);
lcd_write_reg(0xD42E, 0x03);
lcd_write_reg(0xD42F, 0x10);
lcd_write_reg(0xD430, 0x03);
lcd_write_reg(0xD431, 0x33);
lcd_write_reg(0xD432, 0x03);
lcd_write_reg(0xD433, 0x6D);
lcd_write_reg(0xD500, 0x00);
lcd_write_reg(0xD501, 0x33);
lcd_write_reg(0xD502, 0x00);
lcd_write_reg(0xD503, 0x34);
lcd_write_reg(0xD504, 0x00);
lcd_write_reg(0xD505, 0x3A);
lcd_write_reg(0xD506, 0x00);
lcd_write_reg(0xD507, 0x4A);
lcd_write_reg(0xD508, 0x00);
lcd_write_reg(0xD509, 0x5C);
lcd_write_reg(0xD50A, 0x00);
lcd_write_reg(0xD50B, 0x81);
lcd_write_reg(0xD50C, 0x00);
lcd_write_reg(0xD50D, 0xA6);
lcd_write_reg(0xD50E, 0x00);
lcd_write_reg(0xD50F, 0xE5);
lcd_write_reg(0xD510, 0x01);
lcd_write_reg(0xD511, 0x13);
lcd_write_reg(0xD512, 0x01);
lcd_write_reg(0xD513, 0x54);
lcd_write_reg(0xD514, 0x01);
lcd_write_reg(0xD515, 0x82);
lcd_write_reg(0xD516, 0x01);
lcd_write_reg(0xD517, 0xCA);
lcd_write_reg(0xD518, 0x02);
lcd_write_reg(0xD519, 0x00);
lcd_write_reg(0xD51A, 0x02);
lcd_write_reg(0xD51B, 0x01);
lcd_write_reg(0xD51C, 0x02);
lcd_write_reg(0xD51D, 0x34);
lcd_write_reg(0xD51E, 0x02);
lcd_write_reg(0xD51F, 0x67);
lcd_write_reg(0xD520, 0x02);
lcd_write_reg(0xD521, 0x84);
lcd_write_reg(0xD522, 0x02);
lcd_write_reg(0xD523, 0xA4);
lcd_write_reg(0xD524, 0x02);
lcd_write_reg(0xD525, 0xB7);
lcd_write_reg(0xD526, 0x02);
lcd_write_reg(0xD527, 0xCF);
lcd_write_reg(0xD528, 0x02);
lcd_write_reg(0xD529, 0xDE);
lcd_write_reg(0xD52A, 0x02);
lcd_write_reg(0xD52B, 0xF2);
lcd_write_reg(0xD52C, 0x02);
lcd_write_reg(0xD52D, 0xFE);
lcd_write_reg(0xD52E, 0x03);
lcd_write_reg(0xD52F, 0x10);
lcd_write_reg(0xD530, 0x03);
lcd_write_reg(0xD531, 0x33);
lcd_write_reg(0xD532, 0x03);
lcd_write_reg(0xD533, 0x6D);
lcd_write_reg(0xD600, 0x00);
lcd_write_reg(0xD601, 0x33);
lcd_write_reg(0xD602, 0x00);
lcd_write_reg(0xD603, 0x34);
lcd_write_reg(0xD604, 0x00);
lcd_write_reg(0xD605, 0x3A);
lcd_write_reg(0xD606, 0x00);
lcd_write_reg(0xD607, 0x4A);
lcd_write_reg(0xD608, 0x00);
lcd_write_reg(0xD609, 0x5C);
lcd_write_reg(0xD60A, 0x00);
lcd_write_reg(0xD60B, 0x81);
lcd_write_reg(0xD60C, 0x00);
lcd_write_reg(0xD60D, 0xA6);
lcd_write_reg(0xD60E, 0x00);
lcd_write_reg(0xD60F, 0xE5);
lcd_write_reg(0xD610, 0x01);
lcd_write_reg(0xD611, 0x13);
lcd_write_reg(0xD612, 0x01);
lcd_write_reg(0xD613, 0x54);
lcd_write_reg(0xD614, 0x01);
lcd_write_reg(0xD615, 0x82);
lcd_write_reg(0xD616, 0x01);
lcd_write_reg(0xD617, 0xCA);
lcd_write_reg(0xD618, 0x02);
lcd_write_reg(0xD619, 0x00);
lcd_write_reg(0xD61A, 0x02);
lcd_write_reg(0xD61B, 0x01);
lcd_write_reg(0xD61C, 0x02);
lcd_write_reg(0xD61D, 0x34);
lcd_write_reg(0xD61E, 0x02);
lcd_write_reg(0xD61F, 0x67);
lcd_write_reg(0xD620, 0x02);
lcd_write_reg(0xD621, 0x84);
lcd_write_reg(0xD622, 0x02);
lcd_write_reg(0xD623, 0xA4);
lcd_write_reg(0xD624, 0x02);
lcd_write_reg(0xD625, 0xB7);
lcd_write_reg(0xD626, 0x02);
lcd_write_reg(0xD627, 0xCF);
lcd_write_reg(0xD628, 0x02);
lcd_write_reg(0xD629, 0xDE);
lcd_write_reg(0xD62A, 0x02);
lcd_write_reg(0xD62B, 0xF2);
lcd_write_reg(0xD62C, 0x02);
lcd_write_reg(0xD62D, 0xFE);
lcd_write_reg(0xD62E, 0x03);
lcd_write_reg(0xD62F, 0x10);
lcd_write_reg(0xD630, 0x03);
lcd_write_reg(0xD631, 0x33);
lcd_write_reg(0xD632, 0x03);
lcd_write_reg(0xD633, 0x6D);
/* LV2 Page 0 enable */
lcd_write_reg(0xF000, 0x55);
lcd_write_reg(0xF001, 0xAA);
lcd_write_reg(0xF002, 0x52);
lcd_write_reg(0xF003, 0x08);
lcd_write_reg(0xF004, 0x00);
/* Display control */
lcd_write_reg(0xB100, 0xCC);
lcd_write_reg(0xB101, 0x00);
/* Source hold time */
lcd_write_reg(0xB600, 0x05);
/* Gate EQ control */
lcd_write_reg(0xB700, 0x70);
lcd_write_reg(0xB701, 0x70);
/* Source EQ control (Mode 2) */
lcd_write_reg(0xB800, 0x01);
lcd_write_reg(0xB801, 0x03);
lcd_write_reg(0xB802, 0x03);
lcd_write_reg(0xB803, 0x03);
/* Inversion mode (2-dot) */
lcd_write_reg(0xBC00, 0x02);
lcd_write_reg(0xBC01, 0x00);
lcd_write_reg(0xBC02, 0x00);
/* Timing control 4H w/ 4-delay */
lcd_write_reg(0xC900, 0xD0);
lcd_write_reg(0xC901, 0x02);
lcd_write_reg(0xC902, 0x50);
lcd_write_reg(0xC903, 0x50);
lcd_write_reg(0xC904, 0x50);
lcd_write_reg(0x3500, 0x00);
lcd_write_reg(0x3A00, 0x55); /* 16-bit/pixel */
lcd_wr_regno(0x1100);
delay_us(120);
lcd_wr_regno(0x2900);
}
/**
* @brief ILI9806寄存器初始化代码
* @param 无
* @retval 无
*/
void lcd_ex_ili9806_reginit(void)
{
lcd_wr_regno(0xFF); /* EXTC Command Set enable register */
lcd_wr_data(0xFF);
lcd_wr_data(0x98);
lcd_wr_data(0x06);
lcd_wr_regno(0xBC); /* GIP 1 */
lcd_wr_data(0x01);
lcd_wr_data(0x0F);
lcd_wr_data(0x61);
lcd_wr_data(0xFF);
lcd_wr_data(0x01);
lcd_wr_data(0x01);
lcd_wr_data(0x0B);
lcd_wr_data(0x10);
lcd_wr_data(0x37);
lcd_wr_data(0x63);
lcd_wr_data(0xFF);
lcd_wr_data(0xFF);
lcd_wr_data(0x01);
lcd_wr_data(0x01);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_data(0xFF);
lcd_wr_data(0x52);
lcd_wr_data(0x01);
lcd_wr_data(0x00);
lcd_wr_data(0x40);
lcd_wr_regno(0xBD); /* GIP 2 */
lcd_wr_data(0x01);
lcd_wr_data(0x23);
lcd_wr_data(0x45);
lcd_wr_data(0x67);
lcd_wr_data(0x01);
lcd_wr_data(0x23);
lcd_wr_data(0x45);
lcd_wr_data(0x67);
lcd_wr_regno(0xBE); /* GIP 3 */
lcd_wr_data(0x00);
lcd_wr_data(0x01);
lcd_wr_data(0xAB);
lcd_wr_data(0x60);
lcd_wr_data(0x22);
lcd_wr_data(0x22);
lcd_wr_data(0x22);
lcd_wr_data(0x22);
lcd_wr_data(0x22);
lcd_wr_regno(0xC7); /* VCOM Control */
lcd_wr_data(0x36);
lcd_wr_regno(0xED); /* EN_volt_reg VGMP / VGMN /VGSP / VGSN voltage to output */
lcd_wr_data(0x7F);
lcd_wr_data(0x0F);
lcd_wr_regno(0XC0); /* Power Control 1 Setting AVDD / AVEE / VGH / VGL */
lcd_wr_data(0x0F);
lcd_wr_data(0x0B);
lcd_wr_data(0x0A); /* VGH 15V,VGLO-10V */
lcd_wr_regno(0XFC); /* AVDD / AVEE generated by internal pumping. */
lcd_wr_data(0x08);
lcd_wr_regno(0XDF);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_data(0x20);
lcd_wr_regno(0XF3); /* DVDD Voltage Setting */
lcd_wr_data(0x74);
lcd_wr_regno(0xB4); /* Inversion Type */
lcd_wr_data(0x00); /* 02 */
lcd_wr_data(0x00); /* 02 */
lcd_wr_data(0x00); /* 02 */
lcd_wr_regno(0xF7); /* Resolution Control */
lcd_wr_data(0x82); /* 480*800 */
lcd_wr_regno(0xB1); /* FRAME RATE Setting */
lcd_wr_data(0x00);
lcd_wr_data(0x13);
lcd_wr_data(0x13);
lcd_wr_regno(0XF2); /* CR_EQ_PC_SDT #C0,06,40,28 */
lcd_wr_data(0x80);
lcd_wr_data(0x04);
lcd_wr_data(0x40);
lcd_wr_data(0x28);
lcd_wr_regno(0XC1); /* Power Control 2 SD OP Bias_VRH1_VRH2_EXT_CPCK_SEL */
lcd_wr_data(0x17);
lcd_wr_data(0x88); /* VGMP */
lcd_wr_data(0x88); /* VGMN */
lcd_wr_data(0x20);
lcd_wr_regno(0xE0); /* Positive Gamma Control */
lcd_wr_data(0x00); /* P1 */
lcd_wr_data(0x0A); /* P2 */
lcd_wr_data(0x12); /* P3 */
lcd_wr_data(0x10); /* P4 */
lcd_wr_data(0x0E); /* P5 */
lcd_wr_data(0x20); /* P6 */
lcd_wr_data(0xCC); /* P7 */
lcd_wr_data(0x07); /* P8 */
lcd_wr_data(0x06); /* P9 */
lcd_wr_data(0x0B); /* P10 */
lcd_wr_data(0x0E); /* P11 */
lcd_wr_data(0x0F); /* P12 */
lcd_wr_data(0x0D); /* P13 */
lcd_wr_data(0x15); /* P14 */
lcd_wr_data(0x10); /* P15 */
lcd_wr_data(0x00); /* P16 */
lcd_wr_regno(0xE1); /* Negative Gamma Correction */
lcd_wr_data(0x00); /* P1 */
lcd_wr_data(0x0B); /* P2 */
lcd_wr_data(0x13); /* P3 */
lcd_wr_data(0x0D); /* P4 */
lcd_wr_data(0x0E); /* P5 */
lcd_wr_data(0x1B); /* P6 */
lcd_wr_data(0x71); /* P7 */
lcd_wr_data(0x06); /* P8 */
lcd_wr_data(0x06); /* P9 */
lcd_wr_data(0x0A); /* P10 */
lcd_wr_data(0x0F); /* P11 */
lcd_wr_data(0x0E); /* P12 */
lcd_wr_data(0x0F); /* P13 */
lcd_wr_data(0x15); /* P14 */
lcd_wr_data(0x0C); /* P15 */
lcd_wr_data(0x00); /* P16 */
lcd_wr_regno(0x2a);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_data(0x01);
lcd_wr_data(0xdf);
lcd_wr_regno(0x2b);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_data(0x03);
lcd_wr_data(0x1f);
lcd_wr_regno(0x3A); /* Pixel Format */
lcd_wr_data(0x55);
lcd_wr_regno(0x36); /* Memory Access Control */
lcd_wr_data(0x00); /* 02-180 */
lcd_wr_regno(0x11);
delay_ms(120);
lcd_wr_regno(0x29);
delay_ms(20);
lcd_wr_regno(0x2C);
}
/**
* @brief SSD1963寄存器初始化代码
* @param 无
* @retval 无
*/
void lcd_ex_ssd1963_reginit(void)
{
lcd_wr_regno(0xE2); /* Set PLL with OSC = 10MHz (hardware), Multiplier N = 35, 250MHz < VCO < 800MHz = OSC*(N+1), VCO = 300MHz */
lcd_wr_data(0x1D); /* 参数1 */
lcd_wr_data(0x02); /* 参数2 Divider M = 2, PLL = 300/(M+1) = 100MHz */
lcd_wr_data(0x04); /* 参数3 Validate M and N values */
delay_us(100);
lcd_wr_regno(0xE0); /* Start PLL command */
lcd_wr_data(0x01); /* enable PLL */
delay_ms(10);
lcd_wr_regno(0xE0); /* Start PLL command again */
lcd_wr_data(0x03); /* now, use PLL output as system clock */
delay_ms(12);
lcd_wr_regno(0x01); /* 软复位 */
delay_ms(10);
lcd_wr_regno(0xE6); /* 设置像素频率,33Mhz */
lcd_wr_data(0x2F);
lcd_wr_data(0xFF);
lcd_wr_data(0xFF);
lcd_wr_regno(0xB0); /* 设置LCD模式 */
lcd_wr_data(0x20); /* 24位模式 */
lcd_wr_data(0x00); /* TFT 模式 */
lcd_wr_data((SSD_HOR_RESOLUTION - 1) >> 8); /* 设置LCD水平像素 */
lcd_wr_data(SSD_HOR_RESOLUTION - 1);
lcd_wr_data((SSD_VER_RESOLUTION - 1) >> 8); /* 设置LCD垂直像素 */
lcd_wr_data(SSD_VER_RESOLUTION - 1);
lcd_wr_data(0x00); /* RGB序列 */
lcd_wr_regno(0xB4); /* Set horizontal period */
lcd_wr_data((SSD_HT - 1) >> 8);
lcd_wr_data(SSD_HT - 1);
lcd_wr_data(SSD_HPS >> 8);
lcd_wr_data(SSD_HPS);
lcd_wr_data(SSD_HOR_PULSE_WIDTH - 1);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_regno(0xB6); /* Set vertical perio */
lcd_wr_data((SSD_VT - 1) >> 8);
lcd_wr_data(SSD_VT - 1);
lcd_wr_data(SSD_VPS >> 8);
lcd_wr_data(SSD_VPS);
lcd_wr_data(SSD_VER_FRONT_PORCH - 1);
lcd_wr_data(0x00);
lcd_wr_data(0x00);
lcd_wr_regno(0xF0); /* 设置SSD1963与CPU接口为16bit */
lcd_wr_data(0x03); /* 16-bit(565 format) data for 16bpp */
lcd_wr_regno(0x29); /* 开启显示 */
/* 设置PWM输出 背光通过占空比可调 */
lcd_wr_regno(0xD0); /* 设置自动白平衡DBC */
lcd_wr_data(0x00); /* disable */
lcd_wr_regno(0xBE); /* 配置PWM输出 */
lcd_wr_data(0x05); /* 1设置PWM频率 */
lcd_wr_data(0xFE); /* 2设置PWM占空比 */
lcd_wr_data(0x01); /* 3设置C */
lcd_wr_data(0x00); /* 4设置D */
lcd_wr_data(0x00); /* 5设置E */
lcd_wr_data(0x00); /* 6设置F */
lcd_wr_regno(0xB8); /* 设置GPIO配置 */
lcd_wr_data(0x03); /* 2个IO口设置成输出 */
lcd_wr_data(0x01); /* GPIO使用正常的IO功能 */
lcd_wr_regno(0xBA);
lcd_wr_data(0X01); /* GPIO[1:0]=01,控制LCD方向 */
}
874
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
