15. wifi模块编程

CLO_se_

于 2024-09-12 22:08:14 发布

阅读量280

点赞数 5

分类专栏： 51单片机文章标签：单片机嵌入式硬件

本文链接：https://blog.csdn.net/CLO_se_/article/details/142187070

版权

51单片机专栏收录该内容

25 篇文章 0 订阅

订阅专栏

#include "reg52.h"
#include "intrins.h"
#include <string.h>


#define SIZE 12
sfr AUXR = 0x8E;
sbit D5 = P3^7;
sbit D6 = P3^6;

char buffer[SIZE];

//1 工作在路由模式
char LYMO[] = "AT+CWMODE=2\r\n";
//2 使能多链接
char DLJ[] = "AT+CIPMUX=1\r\n"; 
//3 建立TCPServer
char JLFW[] = "AT+CIPSERVER=1\r\n"; // default port = 333 

//发送数据
char FSSJ[] = "AT+CIPSEND=0,5\r\n";


char AT_OK_Flag = 0;				//OK返回值的标志位
char AT_Connect_Net_Flag = 0;		//WIFI GOT IP返回值的标志位
char Client_Connect_Flag = 0;
 
void UartInit(void)		//9600bps@11.0592MHz
{
	AUXR = 0x01;
	SCON = 0x50; //配置串口工作方式1，REN使能接收
	TMOD &= 0x0F;
	TMOD |= 0x20;//定时器1工作方式位8位自动重装
	
	TH1 = 0xFD;
	TL1 = 0xFD;//9600波特率的初值
	TR1 = 1;//启动定时器
	
	EA = 1;//开启总中断
	ES = 1;//开启串口中断
}

void Delay1000ms()		//@11.0592MHz
{
	unsigned char i, j, k;

	_nop_();
	i = 8;
	j = 1;
	k = 243;
	do
	{
		do
		{
			while (--k);
		} while (--j);
	} while (--i);
}

void sendByte(char data_msg)
{
	SBUF = data_msg;
	while(!TI);
	TI = 0;
}

void sendString(char* str)
{
	while( *str != '\0'){
		sendByte(*str);
		str++;
	}
}

void main()
{
	int mark = 0;
	D5 = D6 = 1;//灭状态灯
	//配置C51串口的通信方式
	UartInit();
	Delay1000ms();//给espwifi模块上电时间
	
	
	sendString(LYMO);
	while(!AT_OK_Flag);
	AT_OK_Flag = 0;
	sendString(DLJ);
	while(!AT_OK_Flag);
	AT_OK_Flag = 0;
	sendString(JLFW);

	while(!Client_Connect_Flag);
	AT_OK_Flag = 0;	
	if(Client_Connect_Flag){
		D5 = 0;//点亮D5,代表有客户端接入
		D6 = 0;
	}
	
	
	while(1){
		
		//4 发送数据
		sendString(FSSJ);
		Delay1000ms();
		Delay1000ms();
		sendString("Hello");
		Delay1000ms();
		Delay1000ms();
   
	}
}

void Uart_Handler() interrupt 4
{
	static int i = 0;//静态变量，被初始化一次
	char tmp;

	if(RI)//中断处理函数中，对于接收中断的响应
	{
			RI = 0;//清除接收中断标志位
			tmp = SBUF;
			if(tmp == 'W' || tmp == 'O' || tmp == 'L' || tmp == '0' || tmp == ':'){
				i = 0;
			}
			buffer[i++] = tmp;
			//入网成功的判断依据WIFI GOT IP
			if(buffer[0] == 'W' && buffer[5] == 'G'){
				AT_Connect_Net_Flag	= 1;
				memset(buffer, '\0', SIZE);
			}
			//连接服务器等OK返回值指令的判断
			if(buffer[0] == 'O' && buffer[1] == 'K'){
				AT_OK_Flag	= 1;
				memset(buffer, '\0', SIZE);
			}
			
			if(buffer[0] == '0' && buffer[2] == 'C'){
				Client_Connect_Flag	= 1;
				memset(buffer, '\0', SIZE);
			}
		
			//灯控指令
			if(buffer[0] == ':' && buffer[1] == 'o' && buffer[2] == 'p'){
				D5 = 0;//点亮D5
				memset(buffer, '\0', SIZE);
			}
			if(buffer[0] == ':' && buffer[1] == 'c' && buffer[2] == 'l'){
				D5 = 1;//熄灭D5
				memset(buffer, '\0', SIZE);
			}
			if(i == 12) i = 0;
	}
		
}