一、背景介绍
1.1 DUT接收的数据情况介绍：
driver 在1个cycle向DUT送入v2xH4个pixels，其顺序如下图1所示，这个顺序很重要哦。
图1：DUT输入数据的顺序
1.2 仿真参数实际意义：
(1) 垂直同步时间pvsync：指的是垂直同步的脉冲时间，即image sensor所输出的所有影像数据组成一个frame；
(2) 垂直同步前肩V_frontporch： 指的是当前有效帧结束到下个垂直同步到来的时间间隔。
(3) 垂直同步后肩V_backporch：指的是垂直同步结束到下个有效帧数据到来的时间间隔。
(4) 水平同步时间phsync：指的是水平同步的脉冲时间，即告诉接收端 有效时段内sensor所有的信号输出属同一行；phsync的频率为：像素时钟/(1+H_backporch+768/4+H_frontporch)
(5) 水平同步前肩H_frontporch：指的是当前行结束到下个水平同步到来的时间间隔。
(6) 水平同步后肩H_backporch：指的是水平同步结束到下一行 数据到来的时间间隔.
图像的基本区域划分
行消隐和场消隐的概念来源于老的电视(CRT)视频制式NTSC和PAL，NTSC每秒刷新60次，PAL每秒刷新50次。电子枪从左到右画出像素，每次扫描一条线，画下一条之前要先回到左边并做好画下一条扫描线的准备，这之间有一段时间叫做水平消隐（HBlank）。
画完全部扫描线后，又回到屏幕左上交准备画下一帧，这一段时间就是垂直消隐（VBlank）。
对于CMOS Sensor来说，也有VBlank和HBlank的概念，Rolling Sensor在曝光时候 一次曝光一行，一般CMOS只有一行ADC用于转换电信号，转换好的数字信号逐像素顺序数据，每一行输出结束和下一行输出开始的间隔我们称为行消隐（HBlank），这一帧结束到下一帧开始这段时间称为场消隐（VBlank）.如图2所示
图2 CMOS sensor读出情况
每行耗费的cycle数，这帧图片一共有多少行通过如下参数说明：
pix_xx变量的意义。
二、RTL实现
我写的verilog实现demosaic并不好哈，如没有考虑到资源的优先利用，也没有考虑到把数据存储到外接memory中，毕竟我的目的是用UVM验证RTL代码，搭建的UVM框架才是我的意图。
2.1 端口介绍
【1】输入端口包括：
1 cycle内DUT接收2行4列共8个像素，i_data_0 ---- i_data_7
每帧图像开始的标志：i_pvsync p是per，v是vertical direction ；
图像每行开始的标志：i_phsync p是per，h是horizontal direction；
每行使能信号：i_data_en，其为高，DUT的输入为pixel值、否则输入为0；
【2】输出端口包括
1 cycle内DUT输出2行4列共8个像素、且RGB三通道，
o_data_R_0 ---- o_data_R_7，o_data_G_0 ---- o_data_G_7，o_data_B_0 ---- o_data_B_7
每帧图像开始处理的标志：o_pvsync, p是per，v是vertical direction ；
图像每行开始处理的标志：o_phsync, p是per，h是horizontal direction；
每行输出的使能信号：o_data_en，其为高，DUT的输出为内部算法计算的值、否则输出为0；
其中，i_phsync, o_phsync与i_pvsync o_pvsync, i_data_en, o_data_en的延迟时间相等。
2.2 使用的memory个数
会用到三条memory，每条的深度为 图像的宽度，bit位宽为1个字节（默认输入像素值是1字节），即存三行数据。
代码中实现memory也非常简单，就是定义一个数组，这代码中的缺陷之一，如果您有很好的解决办法，可以给出对应解决方案。
2.3 延迟情况：
延迟1行(图像宽度/channel_h+HBLANK+H_pulse)+2cycle；
代码中使用移位寄存器实现，这会相当浪费资源，也是代码中的缺陷之一。如果您有很好的解决办法，可以给出对应解决方案。另外，书籍《基于FPGA的数字图像处理原理及应用》4.2.1节设计给出了其中一种解决方法
2.4 代码实现：
/*
* ISP - 反马赛克(Demosaic)处理
image sensor处理后的 bayer类型图像转为 -> R, Gr, Gb, B 图像
*/
module isp_demosaic #(
parameter BITS = 8, //支持8/16/24/32
parameter H_frontporch = 50,
parameter H_PULSE = 1,
parameter H_backporch = 50,
parameter HEIGHT = 512,
parameter V_frontporch = 10,
parameter V_PULSE = 1,
parameter V_backporch = 10,
parameter WIDTH = 768,
parameter h_chan = 4,
parameter v_chan = 2,
parameter BAYER = "rggb"
)(
input xclk ,
input rst_n ,
input i_data_en ,
input i_phsync ,
input i_pvsync ,
input [BITS-1:0] i_data_0 ,
input [BITS-1:0] i_data_1 ,
input [BITS-1:0] i_data_2 ,
input [BITS-1:0] i_data_3 ,
input [BITS-1:0] i_data_4 ,
input [BITS-1:0] i_data_5 ,
input [BITS-1:0] i_data_6 ,
input [BITS-1:0] i_data_7 ,
output o_data_en ,
output o_phsync ,
output o_pvsync ,
output [BITS-1:0] o_data_r_0 , o_data_g_0 , o_data_b_0 ,
output [BITS-1:0] o_data_r_1 , o_data_g_1 , o_data_b_1 ,
output [BITS-1:0] o_data_r_2 , o_data_g_2 , o_data_b_2 ,
output [BITS-1:0] o_data_r_3 , o_data_g_3 , o_data_b_3 ,
output [BITS-1:0] o_data_r_4 , o_data_g_4 , o_data_b_4 ,
output [BITS-1:0] o_data_r_5 , o_data_g_5 , o_data_b_5 ,
output [BITS-1:0] o_data_r_6 , o_data_g_6 , o_data_b_6 ,
output [BITS-1:0] o_data_r_7 , o_data_g_7 , o_data_b_7 ,
output done );
localparam H_transfercycle = WIDTH / h_chan;
localparam V_transferline = HEIGHT / v_chan;
localparam H_totalcycle = H_frontporch + H_PULSE + H_transfercycle + H_backporch ;
localparam V_totalline = V_frontporch + V_PULSE + V_transferline + V_backporch ;
localparam integer H_bit = clogb2(HEIGHT-1);
localparam integer V_bit = clogb2(WIDTH -1);
localparam integer num3 = clogb2(H_totalcycle -1);
// 延迟1行linedelay + DLY_CLK 个cycles
// 这种延迟方式太太太浪费资源了，需要使用新的方式来实现
localparam DLY_CLK = H_totalcycle + 2;
reg [H_totalcycle-1:0] data_en_tmp_dly;
reg [DLY_CLK -1:0] data_en_dly;
reg [DLY_CLK -1:0] pvsync_dly;
reg [DLY_CLK -1:0] phsync_dly;
always @ (posedge xclk or negedge rst_n) begin
if (!rst_n) begin
data_en_tmp_dly <= 0;
data_en_dly <= 0;
pvsync_dly <= 0;
phsync_dly <= 0;
end else begin
data_en_tmp_dly <= {data_en_tmp_dly[H_totalcycle-2:0], i_data_en};
data_en_dly <= {data_en_dly [DLY_CLK -2:0], i_data_en};
pvsync_dly <= { pvsync_dly [DLY_CLK -2:0], i_pvsync };
phsync_dly <= { phsync_dly [DLY_CLK -2:0], i_phsync };
end
end
// 处理 o_data_en，存在 "1"行 的line_delay , 且要延迟i_data_en 1个cycle
assign o_data_en = data_en_dly[DLY_CLK-1];
assign o_pvsync = pvsync_dly[DLY_CLK-1];
assign o_phsync = phsync_dly[DLY_CLK-1];
wire data_en_tmp = data_en_tmp_dly[H_totalcycle-1];
// 处理列数: col_cnt; // 0, 1, 2, 3, ..., WIDTH/v_chan-1. 当前列数，根据i_data_en的上升沿开始计数，xclk上升沿且i_data_en为高，则加1
reg [V_bit:0] col_cnt;
always @ (posedge xclk or negedge rst_n) begin
if (!rst_n) begin
col_cnt <= {V_bit{1'b0}};
end else if ( i_pvsync ) begin
col_cnt <= {V_bit{1'b0}};
end else if (i_data_en | data_en_tmp) begin
col_cnt <= col_cnt + 1;
end else
col_cnt <= 0;
end
// 处理行数: 0, 1, 2, 3, ..., HEIGHT/h_chan - 1；只考虑visiable区域
reg [H_bit:0] line_cnt ;
always @ (posedge xclk or negedge rst_n) begin
if (!rst_n) begin
line_cnt <= {H_bit{1'b0}};
end else if ( i_pvsync ) begin
line_cnt <= {H_bit{1'b0}};
end else if(col_cnt == WIDTH/h_chan) begin
line_cnt <= line_cnt + 1;
end else
line_cnt <= line_cnt;
end
//wire [H_bit:0] row_cnt = (i_data_en) ? line_cnt : {H_bit{1'bx}} ;
wire [H_bit:0] row_cnt = (col_cnt != WIDTH/h_chan) ? (i_data_en | data_en_tmp) ? line_cnt : {H_bit{1'bx}} : line_cnt ;
reg [H_bit : 0] line_nums;
reg delay;
reg done_tmp;
always @ (posedge xclk or negedge rst_n) begin
if (!rst_n) begin
line_nums = 0;
done_tmp <= 0;
end else begin
delay <= data_en_dly[DLY_CLK-1];
if (delay & !data_en_dly[DLY_CLK-1]) begin
line_nums = line_nums + 1;
end
if (line_nums == HEIGHT/v_chan) begin
done_tmp <= 1;
line_nums = 0;
end else begin
done_tmp <= 0;
end
end
end
assign done = done_tmp;
// 定义3个memory，
reg [BITS-1:0] mem_top_pre [WIDTH]; // 前1行中的上面1行
reg [BITS-1:0] mem_down_pre[WIDTH]; // 前1行中的下面1行
reg [BITS-1:0] mem_pre_pre [WIDTH]; // 前1行的前1行中的下面1行
reg [BITS-1:0] pix00, pix01, pix02, pix03, pix04, pix05;
reg [BITS-1:0] pix10, pix11, pix12, pix13, pix14, pix15;
reg [BITS-1:0] pix20, pix21, pix22, pix23, pix24, pix25;
reg [BITS-1:0] pix30, pix31, pix32, pix33, pix34, pix35;
// i_data_en = 1 ==> col_cnt = 0, 1, 2, ..., WIDTH/h_chan - 1;
// [1] 边界处理：第0行不会参与计算，只是向memory中存储新的数据
always @ (posedge xclk or negedge rst_n) begin
if (!rst_n) begin
for(integer i = 0; i < WIDTH; i++) begin
mem_top_pre[i] <= 0;
mem_pre_pre[i] <= 0;
mem_down_pre[i] <= 0;
end
end else if ((i_data_en) && (row_cnt == 0)) begin
// 两个memory解决不了，需要三个
mem_top_pre [h_chan * col_cnt + 0] <= i_data_0;
mem_top_pre [h_chan * col_cnt + 1] <= i_data_1;
mem_top_pre [h_chan * col_cnt + 2] <= i_data_4;
mem_top_pre [h_chan * col_cnt + 3] <= i_data_5;
mem_pre_pre [h_chan * col_cnt + 0] <= i_data_2;
mem_pre_pre [h_chan * col_cnt + 1] <= i_data_3;
mem_pre_pre [h_chan * col_cnt + 2] <= i_data_6;
mem_pre_pre [h_chan * col_cnt + 3] <= i_data_7;
mem_down_pre[h_chan * col_cnt + 0] <= i_data_2;
mem_down_pre[h_chan * col_cnt + 1] <= i_data_3;
mem_down_pre[h_chan * col_cnt + 2] <= i_data_6;
mem_down_pre[h_chan * col_cnt + 3] <= i_data_7;
end
end
always @ (posedge xclk or negedge rst_n) begin
if (!rst_n) begin
end else begin
if ((row_cnt > 0 ) && (row_cnt < HEIGHT/v_chan ) )begin
// [2] 非边界处理：先从memory中取上面2行第数据 然后再向memory中存储新的数据
if (col_cnt < WIDTH/h_chan ) begin
pix11 <= mem_top_pre [h_chan * col_cnt + 0 ] ;
pix12 <= mem_top_pre [h_chan * col_cnt + 1 ] ;
pix13 <= mem_top_pre [h_chan * col_cnt + 2 ] ;
pix14 <= mem_top_pre [h_chan * col_cnt + 3 ] ;
pix21 <= mem_down_pre[h_chan * col_cnt + 0 ] ;
pix22 <= mem_down_pre[h_chan * col_cnt + 1 ] ;
pix23 <= mem_down_pre[h_chan * col_cnt + 2 ] ;
pix24 <= mem_down_pre[h_chan * col_cnt + 3 ] ;
pix31 <= i_data_0;
pix32 <= i_data_1;
pix33 <= i_data_4;
pix34 <= i_data_5;
if (row_cnt == 1 ) begin
/************************准备数据用于处理第0行 [syncrt]*******************/
pix01 <= mem_down_pre[h_chan * col_cnt + 0 ] ; // pix21
pix02 <= mem_down_pre[h_chan * col_cnt + 1 ] ; // pix23
pix03 <= mem_down_pre[h_chan * col_cnt + 2 ] ; // pix24
pix04 <= mem_down_pre[h_chan * col_cnt + 3 ] ; // pix24
// 左边界 + 上边界 处理，做镜像。
if ( col_cnt == 0 ) begin
pix00 <= mem_down_pre[h_chan * col_cnt + 1 ] ; // pix22
pix05 <= mem_down_pre[h_chan * col_cnt + 4 ] ; //
pix10 <= mem_top_pre [h_chan * col_cnt + 1 ] ; // pix12
pix15 <= mem_top_pre [h_chan * col_cnt + 4 ] ; //
pix20 <= mem_down_pre[h_chan * col_cnt + 1 ] ; // pix22
pix25 <= mem_down_pre[h_chan * col_cnt + 4 ] ; //
pix30 <= i_data_1 ; // pix22
// 差一个 pix35， 没办法
end else if ((col_cnt > 0) && (col_cnt < WIDTH/h_chan - 1)) begin
// 上边界 处理，做镜像。
pix00 <= pix04; //pix24 ;
pix05 <= mem_down_pre[h_chan * col_cnt + 4 ] ;
pix10 <= pix14 ; // 相对于 mem_top_pre [h_chan * col_cnt + 2 ] ; 延迟2 cycle
pix15 <= mem_top_pre [h_chan * col_cnt + 4 ] ;
pix20 <= pix24 ; // 相对于 mem_down_pre[h_chan * col_cnt + 2 ] ; 延迟2 cycle
pix25 <= mem_down_pre[h_chan * col_cnt + 4 ] ;
pix30 <= pix34 ;
// 差一个 pix35， 没办法
end else if (col_cnt == WIDTH/h_chan - 1) begin
// 右边界 处理，做镜像。考虑到右侧边界情况：最后一列时 col_cnt + 4 则会越界、取值是错误的。
pix00 <= pix04 ;
pix05 <= mem_down_pre[h_chan * col_cnt + 2 ];
pix10 <= pix14 ; // pix12
pix15 <= mem_top_pre [h_chan * col_cnt + 2 ];
pix20 <= pix24 ;
pix25 <= mem_down_pre[h_chan * col_cnt + 2 ];
pix30 <= pix34 ;
pix35 <= i_data_4 ; // 此时 i_data_en为0，不会有输入数据了，故需要提前暂存一个数据
end
/************************准备数据用于处理第0行 [Over]*******************/
end else if (row_cnt != HEIGHT/v_chan ) begin
pix01 <= mem_pre_pre [h_chan * col_cnt + 0 ] ;
pix02 <= mem_pre_pre [h_chan * col_cnt + 1 ] ;
pix03 <= mem_pre_pre [h_chan * col_cnt + 2 ] ;
pix04 <= mem_pre_pre [h_chan * col_cnt + 3 ] ;
/************************准备数据用于处理第1--HEIGHT/v_chan - 1s行 [syncrt]*******************/
if ( col_cnt == 0 ) begin
pix00 <= mem_pre_pre [h_chan * col_cnt + 1 ] ;
pix05 <= mem_pre_pre [h_chan * col_cnt + 4 ] ;
pix10 <= mem_top_pre [h_chan * col_cnt + 1 ] ; // pix12
pix15 <= mem_top_pre [h_chan * col_cnt + 4 ] ; //
pix20 <= mem_down_pre[h_chan * col_cnt + 1 ] ; // pix22
pix25 <= mem_down_pre[h_chan * col_cnt + 4 ] ; //
pix30 <= i_data_1 ; // pix22
// 差一个 pix35， 没办法
end else if ((col_cnt > 0) && (col_cnt < WIDTH/h_chan - 1)) begin
pix00 <= pix04 ;
pix05 <= mem_pre_pre [h_chan * col_cnt + 4 ] ;
pix10 <= pix14; // 理论上是 mem_top_pre [h_chan * col_cnt - 1], 但是数据已经被覆盖掉了
pix15 <= mem_top_pre [h_chan * col_cnt + 4 ] ; //
pix20 <= pix24;
pix25 <= mem_down_pre[h_chan * col_cnt + 4 ] ; //
pix30 <= pix34;
// 差一个 pix35， 没办法
end else if (col_cnt == WIDTH/h_chan - 1) begin
pix00 <= pix04 ;
pix05 <= mem_pre_pre[h_chan * col_cnt + 2 ];
pix10 <= pix14 ; // pix12
pix15 <= mem_top_pre [h_chan * col_cnt + 2 ];
pix20 <= pix24 ;
pix25 <= mem_down_pre[h_chan * col_cnt + 2 ];
pix30 <= pix34 ;
pix35 <= i_data_4 ; // 此时 i_data_en为0，不会有输入数据了，故需要提前暂存一个数据
end
/************************准备数据用于处理第1--HEIGHT/v_chan - 1行 [Over]*******************/
end
end
// 存储到memory
mem_top_pre [h_chan * col_cnt + 0] <= i_data_0;
mem_top_pre [h_chan * col_cnt + 1] <= i_data_1;
mem_top_pre [h_chan * col_cnt + 2] <= i_data_4;
mem_top_pre [h_chan * col_cnt + 3] <= i_data_5;
mem_down_pre[h_chan * col_cnt + 0] <= i_data_2;
mem_down_pre[h_chan * col_cnt + 1] <= i_data_3;
mem_down_pre[h_chan * col_cnt + 2] <= i_data_6;
mem_down_pre[h_chan * col_cnt + 3] <= i_data_7;
mem_pre_pre [h_chan * col_cnt + 0] <= mem_down_pre[h_chan * col_cnt + 0] ;
mem_pre_pre [h_chan * col_cnt + 1] <= mem_down_pre[h_chan * col_cnt + 1] ;
mem_pre_pre [h_chan * col_cnt + 2] <= mem_down_pre[h_chan * col_cnt + 2] ;
mem_pre_pre [h_chan * col_cnt + 3] <= mem_down_pre[h_chan * col_cnt + 3] ;
end else if (row_cnt == HEIGHT/v_chan ) begin
/************************准备数据用于处理第 HEIGHT/v_chan - 1行(最后 1 行) [syncrt]*******************/
pix11 <= mem_top_pre [h_chan * col_cnt + 0 ] ;
pix12 <= mem_top_pre [h_chan * col_cnt + 1 ] ;
pix13 <= mem_top_pre [h_chan * col_cnt + 2 ] ;
pix14 <= mem_top_pre [h_chan * col_cnt + 3 ] ;
pix21 <= mem_down_pre[h_chan * col_cnt + 0 ] ;
pix22 <= mem_down_pre[h_chan * col_cnt + 1 ] ;
pix23 <= mem_down_pre[h_chan * col_cnt + 2 ] ;
pix24 <= mem_down_pre[h_chan * col_cnt + 3 ] ;
pix31 <= mem_top_pre [h_chan * col_cnt + 0 ] ;
pix32 <= mem_top_pre [h_chan * col_cnt + 1 ] ;
pix33 <= mem_top_pre [h_chan * col_cnt + 2 ] ;
pix34 <= mem_top_pre [h_chan * col_cnt + 3 ] ;
pix01 <= mem_pre_pre [h_chan * col_cnt + 0 ] ;
pix02 <= mem_pre_pre [h_chan * col_cnt + 1 ] ;
pix03 <= mem_pre_pre [h_chan * col_cnt + 2 ] ;
pix04 <= mem_pre_pre [h_chan * col_cnt + 3 ] ;
if ( col_cnt == 0 ) begin
pix00 <= mem_pre_pre [h_chan * col_cnt + 1 ] ;
pix05 <= mem_pre_pre [h_chan * col_cnt + 4 ] ;
pix10 <= mem_top_pre [h_chan * col_cnt + 1 ] ; // pix12
pix15 <= mem_top_pre [h_chan * col_cnt + 4 ] ; //
pix20 <= mem_down_pre[h_chan * col_cnt + 1 ] ; // pix22
pix25 <= mem_down_pre[h_chan * col_cnt + 4 ] ; //
pix30 <= mem_top_pre [h_chan * col_cnt + 1 ] ; // pix22
pix35 <= mem_top_pre [h_chan * col_cnt + 4 ] ; // pix22
end else if ((col_cnt > 0) && (col_cnt < WIDTH/h_chan - 1)) begin
pix00 <= pix04 ;
pix05 <= mem_pre_pre [h_chan * col_cnt + 4 ] ;
pix10 <= pix14; // 理论上是 mem_top_pre [h_chan * col_cnt - 1], 但是数据已经被覆盖掉了
pix15 <= mem_top_pre [h_chan * col_cnt + 4 ] ; //
pix20 <= pix24;
pix25 <= mem_down_pre[h_chan * col_cnt + 4 ] ; //
pix30 <= pix34;
pix35 <= mem_top_pre [h_chan * col_cnt + 4 ] ; //
end else if (col_cnt == WIDTH/h_chan - 1) begin
pix00 <= pix04 ;
pix05 <= mem_pre_pre [h_chan * col_cnt + 2 ];
pix10 <= pix14 ; // pix12
pix15 <= mem_top_pre [h_chan * col_cnt + 2 ];
pix20 <= pix24 ;
pix25 <= mem_down_pre[h_chan * col_cnt + 2 ];
pix30 <= pix34 ;
pix35 <= mem_top_pre [h_chan * col_cnt + 2 ]; // 此时 i_data_en为0，不会有输入数据了，故需要提前暂存一个数据
end
/************************准备数据用于处理第 HEIGHT/v_chan - 1行(最后 1 行) [end]*******************/
end
end
end
reg [BITS-1:0] data_ul_0, data_ur_0, data_ll_0, data_lr_0 ;
reg [BITS-1:0] data_ul_1, data_ur_1, data_ll_1, data_lr_1 ;
reg [BITS-1:0] data_ul_2, data_ur_2, data_ll_2, data_lr_2 ;
reg [BITS-1:0] data_ul_3, data_ur_3, data_ll_3, data_lr_3 ;
reg [BITS-1:0] data_ul_4, data_ur_4, data_ll_4, data_lr_4 ;
reg [BITS-1:0] data_ul_5, data_ur_5, data_ll_5, data_lr_5 ;
reg [BITS-1:0] data_ul_6, data_ur_6, data_ll_6, data_lr_6 ;
reg [BITS-1:0] data_ul_7, data_ur_7, data_ll_7, data_lr_7 ;
always @ (posedge xclk or negedge rst_n) begin
if (!rst_n) begin
end else begin
data_ul_0 <= upper_left ( pix00, pix01, pix02, pix10, pix11, pix12, pix20, pix21, pix22 , 2'b00);
data_ur_0 <= upper_left ( pix00, pix01, pix02, pix10, pix11, pix12, pix20, pix21, pix22 , 2'b01);
data_ll_0 <= upper_left ( pix00, pix01, pix02, pix10, pix11, pix12, pix20, pix21, pix22 , 2'b10);
data_lr_0 <= upper_left ( pix00, pix01, pix02, pix10, pix11, pix12, pix20, pix21, pix22 , 2'b11);
data_ul_1 <= upper_right( pix01, pix02, pix03, pix11, pix12, pix13, pix21, pix22, pix23 , 2'b00);
data_ur_1 <= upper_right( pix01, pix02, pix03, pix11, pix12, pix13, pix21, pix22, pix23 , 2'b01);
data_ll_1 <= upper_right( pix01, pix02, pix03, pix11, pix12, pix13, pix21, pix22, pix23 , 2'b10);
data_lr_1 <= upper_right( pix01, pix02, pix03, pix11, pix12, pix13, pix21, pix22, pix23 , 2'b11);
data_ul_2 <= lower_left ( pix10, pix11, pix12, pix20, pix21, pix22, pix30, pix31, pix32, 2'b00);
data_ur_2 <= lower_left ( pix10, pix11, pix12, pix20, pix21, pix22, pix30, pix31, pix32, 2'b01);
data_ll_2 <= lower_left ( pix10, pix11, pix12, pix20, pix21, pix22, pix30, pix31, pix32, 2'b10);
data_lr_2 <= lower_left ( pix10, pix11, pix12, pix20, pix21, pix22, pix30, pix31, pix32, 2'b11);
data_ul_3 <= lower_right( pix11, pix12, pix13, pix21, pix22, pix23, pix31, pix32, pix33, 2'b00);
data_ur_3 <= lower_right( pix11, pix12, pix13, pix21, pix22, pix23, pix31, pix32, pix33, 2'b01);
data_ll_3 <= lower_right( pix11, pix12, pix13, pix21, pix22, pix23, pix31, pix32, pix33, 2'b10);
data_lr_3 <= lower_right( pix11, pix12, pix13, pix21, pix22, pix23, pix31, pix32, pix33, 2'b11);
data_ul_4 <= upper_left ( pix02, pix03, pix04, pix12, pix13, pix14, pix22, pix23, pix24, 2'b00);
data_ur_4 <= upper_left ( pix02, pix03, pix04, pix12, pix13, pix14, pix22, pix23, pix24, 2'b01);
data_ll_4 <= upper_left ( pix02, pix03, pix04, pix12, pix13, pix14, pix22, pix23, pix24, 2'b10);
data_lr_4 <= upper_left ( pix02, pix03, pix04, pix12, pix13, pix14, pix22, pix23, pix24, 2'b11);
data_ul_5 <= upper_right( pix03, pix04, pix05, pix13, pix14, pix15, pix23, pix24, pix25, 2'b00);
data_ur_5 <= upper_right( pix03, pix04, pix05, pix13, pix14, pix15, pix23, pix24, pix25, 2'b01);
data_ll_5 <= upper_right( pix03, pix04, pix05, pix13, pix14, pix15, pix23, pix24, pix25, 2'b10);
data_lr_5 <= upper_right( pix03, pix04, pix05, pix13, pix14, pix15, pix23, pix24, pix25, 2'b11);
data_ul_6 <= lower_left ( pix12, pix13, pix14, pix22, pix23, pix24, pix32, pix33, pix34, 2'b00);
data_ur_6 <= lower_left ( pix12, pix13, pix14, pix22, pix23, pix24, pix32, pix33, pix34, 2'b01);
data_ll_6 <= lower_left ( pix12, pix13, pix14, pix22, pix23, pix24, pix32, pix33, pix34, 2'b10);
data_lr_6 <= lower_left ( pix12, pix13, pix14, pix22, pix23, pix24, pix32, pix33, pix34, 2'b11);
if ((row_cnt > 0 ) && (row_cnt < HEIGHT/v_chan )) begin
if ((col_cnt > 0 ) && (col_cnt < WIDTH/h_chan)) begin
data_ul_7 <= lower_right( pix13, pix14, pix15, pix23, pix24, pix25, pix33, pix34, i_data_0, 2'b00);
data_ur_7 <= lower_right( pix13, pix14, pix15, pix23, pix24, pix25, pix33, pix34, i_data_0, 2'b01);
data_ll_7 <= lower_right( pix13, pix14, pix15, pix23, pix24, pix25, pix33, pix34, i_data_0, 2'b10);
data_lr_7 <= lower_right( pix13, pix14, pix15, pix23, pix24, pix25, pix33, pix34, i_data_0, 2'b11);
end else if ((col_cnt == WIDTH/h_chan) ) begin
data_ul_7 <= lower_right( pix13, pix14, pix15, pix23, pix24, pix25, pix33, pix34, pix35 , 2'b00);
data_ur_7 <= lower_right( pix13, pix14, pix15, pix23, pix24, pix25, pix33, pix34, pix35 , 2'b01);
data_ll_7 <= lower_right( pix13, pix14, pix15, pix23, pix24, pix25, pix33, pix34, pix35 , 2'b10);
data_lr_7 <= lower_right( pix13, pix14, pix15, pix23, pix24, pix25, pix33, pix34, pix35 , 2'b11);
end
end else if (row_cnt == HEIGHT/v_chan ) begin
data_ul_7 <= lower_right( pix13, pix14, pix15, pix23, pix24, pix25, pix33, pix34, pix35 , 2'b00);
data_ur_7 <= lower_right( pix13, pix14, pix15, pix23, pix24, pix25, pix33, pix34, pix35 , 2'b01);
data_ll_7 <= lower_right( pix13, pix14, pix15, pix23, pix24, pix25, pix33, pix34, pix35 , 2'b10);
data_lr_7 <= lower_right( pix13, pix14, pix15, pix23, pix24, pix25, pix33, pix34, pix35 , 2'b11);
end
end
end
reg [BITS+1:0] data_b_0, data_b_1, data_b_2, data_b_3;
reg [BITS+1:0] data_b_4, data_b_5, data_b_6, data_b_7;
always @(*) begin
case (BAYER)
"rggb", "bggr": begin
data_b_0 = (data_ur_0 + data_ll_0) >> 1 ;
data_b_1 = (data_ur_1 + data_ll_1) >> 1 ;
data_b_2 = (data_ur_2 + data_ll_2) >> 1 ;
data_b_3 = (data_ur_3 + data_ll_3) >> 1 ;
data_b_4 = (data_ur_4 + data_ll_4) >> 1 ;
data_b_5 = (data_ur_5 + data_ll_5) >> 1 ;
data_b_6 = (data_ur_6 + data_ll_6) >> 1 ;
data_b_7 = (data_ur_7 + data_ll_7) >> 1 ;
end
"gbrg", "grbg": begin
data_b_0 = (data_ul_0 + data_lr_0) >> 1 ;
data_b_1 = (data_ul_1 + data_lr_1) >> 1 ;
data_b_2 = (data_ul_2 + data_lr_2) >> 1 ;
data_b_3 = (data_ul_3 + data_lr_3) >> 1 ;
data_b_4 = (data_ul_4 + data_lr_4) >> 1 ;
data_b_5 = (data_ul_5 + data_lr_5) >> 1 ;
data_b_6 = (data_ul_6 + data_lr_6) >> 1 ;
data_b_7 = (data_ul_7 + data_lr_7) >> 1 ;
end
endcase
end
//0:BGGR 1:GBRG 2:GRBG 3:RGGB
assign o_data_r_0 = (o_data_en==1)?(BAYER=="rggb")?data_ul_0:(BAYER=="bggr")?data_lr_0:(BAYER=="gbrg")?data_ll_0:(BAYER=="grbg")?data_ur_0:{BITS{1'bx}}:{BITS{1'bx}};
assign o_data_r_1 = (o_data_en==1)?(BAYER=="rggb")?data_ul_1:(BAYER=="bggr")?data_lr_1:(BAYER=="gbrg")?data_ll_1:(BAYER=="grbg")?data_ur_1:{BITS{1'bx}}:{BITS{1'bx}};
assign o_data_r_2 = (o_data_en==1)?(BAYER=="rggb")?data_ul_2:(BAYER=="bggr")?data_lr_2:(BAYER=="gbrg")?data_ll_2:(BAYER=="grbg")?data_ur_2:{BITS{1'bx}}:{BITS{1'bx}};
assign o_data_r_3 = (o_data_en==1)?(BAYER=="rggb")?data_ul_3:(BAYER=="bggr")?data_lr_3:(BAYER=="gbrg")?data_ll_3:(BAYER=="grbg")?data_ur_3:{BITS{1'bx}}:{BITS{1'bx}};
assign o_data_r_4 = (o_data_en==1)?(BAYER=="rggb")?data_ul_4:(BAYER=="bggr")?data_lr_4:(BAYER=="gbrg")?data_ll_4:(BAYER=="grbg")?data_ur_4:{BITS{1'bx}}:{BITS{1'bx}};
assign o_data_r_5 = (o_data_en==1)?(BAYER=="rggb")?data_ul_5:(BAYER=="bggr")?data_lr_5:(BAYER=="gbrg")?data_ll_5:(BAYER=="grbg")?data_ur_5:{BITS{1'bx}}:{BITS{1'bx}};
assign o_data_r_6 = (o_data_en==1)?(BAYER=="rggb")?data_ul_6:(BAYER=="bggr")?data_lr_6:(BAYER=="gbrg")?data_ll_6:(BAYER=="grbg")?data_ur_6:{BITS{1'bx}}:{BITS{1'bx}};
assign o_data_r_7 = (o_data_en==1)?(BAYER=="rggb")?data_ul_7:(BAYER=="bggr")?data_lr_7:(BAYER=="gbrg")?data_ll_7:(BAYER=="grbg")?data_ur_7:{BITS{1'bx}}:{BITS{1'bx}};
assign o_data_b_0 = (o_data_en==1)?(BAYER=="rggb")?data_lr_0:(BAYER=="bggr")?data_ul_0:(BAYER=="gbrg")?data_ur_0:(BAYER=="grbg")?data_ll_0:{BITS{1'bx}}:{BITS{1'bx}};
assign o_data_b_1 = (o_data_en==1)?(BAYER=="rggb")?data_lr_1:(BAYER=="bggr")?data_ul_1:(BAYER=="gbrg")?data_ur_1:(BAYER=="grbg")?data_ll_1:{BITS{1'bx}}:{BITS{1'bx}};
assign o_data_b_2 = (o_data_en==1)?(BAYER=="rggb")?data_lr_2:(BAYER=="bggr")?data_ul_2:(BAYER=="gbrg")?data_ur_2:(BAYER=="grbg")?data_ll_2:{BITS{1'bx}}:{BITS{1'bx}};
assign o_data_b_3 = (o_data_en==1)?(BAYER=="rggb")?data_lr_3:(BAYER=="bggr")?data_ul_3:(BAYER=="gbrg")?data_ur_3:(BAYER=="grbg")?data_ll_3:{BITS{1'bx}}:{BITS{1'bx}};
assign o_data_b_4 = (o_data_en==1)?(BAYER=="rggb")?data_lr_4:(BAYER=="bggr")?data_ul_4:(BAYER=="gbrg")?data_ur_4:(BAYER=="grbg")?data_ll_4:{BITS{1'bx}}:{BITS{1'bx}};
assign o_data_b_5 = (o_data_en==1)?(BAYER=="rggb")?data_lr_5:(BAYER=="bggr")?data_ul_5:(BAYER=="gbrg")?data_ur_5:(BAYER=="grbg")?data_ll_5:{BITS{1'bx}}:{BITS{1'bx}};
assign o_data_b_6 = (o_data_en==1)?(BAYER=="rggb")?data_lr_6:(BAYER=="bggr")?data_ul_6:(BAYER=="gbrg")?data_ur_6:(BAYER=="grbg")?data_ll_6:{BITS{1'bx}}:{BITS{1'bx}};
assign o_data_b_7 = (o_data_en==1)?(BAYER=="rggb")?data_lr_7:(BAYER=="bggr")?data_ul_7:(BAYER=="gbrg")?data_ur_7:(BAYER=="grbg")?data_ll_7:{BITS{1'bx}}:{BITS{1'bx}};
assign o_data_g_0 = (o_data_en==1)? (data_b_0 > {BITS{1'b1}}) ? {BITS{1'b1}} :data_b_0[BITS-1:0] : {BITS{1'bx}};
assign o_data_g_1 = (o_data_en==1)? (data_b_1 > {BITS{1'b1}}) ? {BITS{1'b1}} :data_b_1[BITS-1:0] : {BITS{1'bx}};
assign o_data_g_2 = (o_data_en==1)? (data_b_2 > {BITS{1'b1}}) ? {BITS{1'b1}} :data_b_2[BITS-1:0] : {BITS{1'bx}};
assign o_data_g_3 = (o_data_en==1)? (data_b_3 > {BITS{1'b1}}) ? {BITS{1'b1}} :data_b_3[BITS-1:0] : {BITS{1'bx}};
assign o_data_g_4 = (o_data_en==1)? (data_b_4 > {BITS{1'b1}}) ? {BITS{1'b1}} :data_b_4[BITS-1:0] : {BITS{1'bx}};
assign o_data_g_5 = (o_data_en==1)? (data_b_5 > {BITS{1'b1}}) ? {BITS{1'b1}} :data_b_5[BITS-1:0] : {BITS{1'bx}};
assign o_data_g_6 = (o_data_en==1)? (data_b_6 > {BITS{1'b1}}) ? {BITS{1'b1}} :data_b_6[BITS-1:0] : {BITS{1'bx}};
assign o_data_g_7 = (o_data_en==1)? (data_b_7 > {BITS{1'b1}}) ? {BITS{1'b1}} :data_b_7[BITS-1:0] : {BITS{1'bx}};
// 右上：upper_right
// 左上：upper_left
// 右下：lower_right
// 左下：lower_left
function [BITS-1:0] upper_left;
input [BITS-1:0] data00, data01, data02, data10, data11, data12, data20, data21, data22;
input [ 1:0] pos;
reg [BITS+1:0] o_data;
begin
case (pos)
2'b00 : o_data = data11; // o_data_ul
2'b01 : o_data = (data10 + data12)>>1; // o_data_ur
2'b10 : o_data = (data01 + data21)>>1; // o_data_ll
2'b11 : o_data = (data00 + data20 + data02 + data22) >> 2; // o_data_lr
default: o_data = {BITS{1'b0}};
endcase
upper_left = o_data > {BITS{1'b1}} ? {BITS{1'b1}} : o_data[BITS-1:0];
end
endfunction
function [BITS-1:0] upper_right;
input [BITS-1:0] data00, data01, data02, data10, data11, data12, data20, data21, data22;
input [ 1:0] pos;
reg [BITS+1:0] o_data;
begin
case (pos)
2'b00 : o_data = (data10 + data12) >> 1; // o_data_ul
2'b01 : o_data = data11; // o_data_ur
2'b10 : o_data = (data00 + data20 + data02 + data22) >> 2;// o_data_ll
2'b11 : o_data = (data01 + data21) >> 1; // o_data_lr
default: o_data = {BITS{1'b0}};
endcase
upper_right = o_data > {BITS{1'b1}} ? {BITS{1'b1}} : o_data[BITS-1:0];
end
endfunction
function [BITS-1:0] lower_left;
input [BITS-1:0] data00, data01, data02, data10, data11, data12, data20, data21, data22;
input [ 1:0] pos;
reg [BITS+1:0] o_data;
begin
case (pos)
2'b00 : o_data = (data01 + data21) >> 1; // o_data_ul
2'b01 : o_data = (data00 + data20 + data02 + data22) >> 2;// o_data_ur
2'b10 : o_data = data11; // o_data_ll
2'b11 : o_data = (data10 + data12) >> 1; // o_data_lr
default: o_data = {BITS{1'b0}};
endcase
lower_left = o_data > {BITS{1'b1}} ? {BITS{1'b1}} : o_data[BITS-1:0];
end
endfunction
function [BITS-1:0] lower_right;
input [BITS-1:0] data00, data01, data02, data10, data11, data12, data20, data21, data22;
input [ 1:0] pos;
reg [BITS+1:0] o_data;
begin
case (pos)
2'b00 : o_data = (data00 + data20 + data02 + data22) >> 2;// o_data_ul
2'b01 : o_data = (data01 + data21) >> 1; // o_data_ur
2'b10 : o_data = (data10 + data12) >> 1; // o_data_ll
2'b11 : o_data = data11; // o_data_lr
default: o_data = {BITS{1'b0}};
endcase
lower_right = o_data > {BITS{1'b1}} ? {BITS{1'b1}} : o_data[BITS-1:0];
end
endfunction
function integer clogb2 (input integer bit_depth); begin
for(clogb2 = 0; bit_depth > 0; clogb2 = clogb2+1)
bit_depth = bit_depth >> 1;
end
endfunction
endmodule
3106
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
