ZYNQ中GPIO函数详解汇总

Jeffery_fan

已于 2022-04-06 17:08:31 修改

阅读量2k

点赞数 4

分类专栏： ZYNQ 文章标签： fpga 嵌入式 fpga开发 arm

于 2022-01-18 16:01:49 首次发布

本文链接：https://blog.csdn.net/Fan_zhaoyang/article/details/122560762

版权

本文详述了ZYNQ平台中GPIO相关的函数，包括XGpioPs_CfgInitialize的初始化、XGpioPs_Read和XGpioPs_ReadPin的读取、XGpioPs_Write及XGpioPs_WritePin的写入、XGpioPs_SetDirection的引脚方向设定，以及XGpioPs_SetOutputEnablePin的输出使能和XGpioPs_LookupConfig的配置查找功能。

摘要由CSDN通过智能技术生成

前言

ZYNQ在PS端有基本完备的函数库，但是相关学习文档或资料中并未像ARM一样对这些函数的功能进行详细的解释，这篇文章就是想在学习过程中将GPIO相关的函数随手总结下来。

GPIO相关函数汇总

1.XGpioPs_CfgInitialize

s32 XGpioPs_CfgInitialize(XGpioPs *InstancePtr, XGpioPs_Config *ConfigPtr,u32 EffectiveAddr)
{
	s32 Status = XST_SUCCESS;
	u8 i;
	Xil_AssertNonvoid(InstancePtr != NULL);
	Xil_AssertNonvoid(ConfigPtr != NULL);
	Xil_AssertNonvoid(EffectiveAddr != (u32)0);
	/*
	 * Set some default values for instance data, don't indicate the device
	 * is ready to use until everything has been initialized successfully.
	 */
	InstancePtr->IsReady = 0U;
	InstancePtr->GpioConfig.BaseAddr = EffectiveAddr;
	InstancePtr->GpioConfig.DeviceId = ConfigPtr->DeviceId;
	InstancePtr->Handler = (XGpioPs_Handler)StubHandler;
	InstancePtr->Platform = XGetPlatform_Info();

	/* Initialize the Bank data based on platform */
	if (InstancePtr->Platform == XPLAT_ZYNQ_ULTRA_MP) {
		/*
		 *	Max pins in the ZynqMP GPIO device
		 *	0 - 25,  Bank 0
		 *	26 - 51, Bank 1
		 *	52 - 77, Bank 2
		 *	78 - 109, Bank 3
		 *	110 - 141, Bank 4
		 *	142 - 173, Bank 5
		 */
		InstancePtr->MaxPinNum = (u32)174;
		InstancePtr->MaxBanks = (u8)6;
	} else {
		/*
		 *	Max pins in the GPIO device
		 *	0 - 31,  Bank 0
		 *	32 - 53, Bank 1
		 *	54 - 85, Bank 2
		 *	86 - 117, Bank 3
		 */