PADS PCB如何设计邮票孔

行者有路hh

已于 2023-02-24 15:07:18 修改

阅读量5.1k

点赞数 6

分类专栏： PADS PCB设计文章标签：硬件工程 pcb工艺 fpga开发

于 2023-01-03 17:09:48 首次发布

本文链接：https://blog.csdn.net/bhxc809751502/article/details/128536035

版权

PADS PCB设计专栏收录该内容

9 篇文章

订阅专栏

本文介绍了如何按照特定封装尺寸设计PCB邮票孔，包括焊盘的制作与定位。在PADS软件中，详细阐述了焊盘参数设置，如钻孔半径和位置，并提到了单位转换。此外，还讨论了选择过滤器的功能以及如何管理属性标签的位置，以优化设计过程。

摘要生成于 C知道，由 DeepSeek-R1 满血版支持，前往体验 >

一、PCB邮票孔的设计

我们按照下图的封装尺寸来设计邮票孔，如下图所示：

1、邮票孔焊盘的制作

从上图看出来，焊盘的长为1mm、宽为0.9mm，钻孔半径为0.3mm；在设计pads焊盘栈中，填写这些数据，如下图所示：

钻孔偏移焊盘中心0.5mm。钻孔半径0.3mm，钻孔直径为0.6mm。

2、邮票孔焊盘的定位

各个焊盘的位置根据第一张图的位置定位，以形状中心为原点；焊盘放置完成如下图所示：

博主专注职场硬件设计，如果文章对你有帮助，请关注，点赞，收藏。成长路上有前行者。博主将会定期或不定期分享PADS，Allegro设计技巧和经验。

The PADS Layout user interface is designed for ease of use and efficiency. PADS Layout is designed to meet the needs of the power user, while keeping the beginner in mind. PADS Layout’s interface and interaction are similar to other Windows ™ applications. You can interact with PADS Layout using the keyboard, menus, toolbars, and shortcut menus.

To change the unit of measure to inches, mils (default setting), or metric units, click Options on the Tools menu. The Design Units settings are on the Global >General page of the Options dialog box. Leave the current setting of Mils.

During the many phases of the PCB process, you may want to select only specific objects. For example, during component placement you may want to limit selections to components and during interactive routing you may want to limit selections to connections or routes.

To accommodate this working preference, there is a Selection Filter. With theSelection Filter, you can specify which design objects are selectable. Items turnedoff in the list can't be selected.

You display attributes in the design as text labels. You can also add additionallabels to accommodate different size and location requirements for referencedesignators. The visibility and position of each label is managed within the Layout Editor.

You can predefine locations for attribute labels by adding placeholder labels in the PCB decal. The placeholders act as the defaults for new labels added or made visible in the Layout Editor.

Position the Name and Type labels in the decal where the text will not be obscured when visible.

1. Select button .

2. With nothing selected, right-click and click Select Text/Drafting.

3. Select each label and to move it press Ctrl+E.

4. Place them in the approximate location shown in the "Creating a PCB Decal"

section at the beginning of the tutorial.

5. Click to complete the moves.