PADS 如何进行模块复用

在PCB设计的过程中，会采用模块复用的方法以提高PCB设计的效率。那如何进行模块复用呢？

1、先建立复用模块

（1）选中要复用的器件、导线、铜箔等。然后鼠标右键选择→建立复用模块

（2）点击建立复用模块后，跳出建立复用模块对话框。填入复用模块名称

（3）保存复用模块在文件夹下即完成。

2、在当前项目中 添加复用模块

（1）在ECO工具栏下，点击添加复用模块

（2）选择刚才保存的复用模块

（3）在调入的过程中出现警告可以忽略。选择是。

选择是

确定

确定

这时复用的模块附着在鼠标上，点击放置。

即完成模块的复用。刚才保存的复用模块已经添加到当前的项目中。

博主专注职场硬件设计，如果文章对你有帮助，请关注，点赞，收藏。成长路上有前行者。博主将会定期或不定期分享PADS，Allegro设计技巧和经验。

The PADS Layout user interface is designed for ease of use and efficiency. PADS Layout is designed to meet the needs of the power user, while keeping the beginner in mind. PADS Layout’s interface and interaction are similar to other Windows ™ applications. You can interact with PADS Layout using the keyboard, menus, toolbars, and shortcut menus.

To change the unit of measure to inches, mils (default setting), or metric units, click Options on the Tools menu. The Design Units settings are on the Global >General page of the Options dialog box. Leave the current setting of Mils.

During the many phases of the PCB process, you may want to select only specific objects. For example, during component placement you may want to limit selections to components and during interactive routing you may want to limit selections to connections or routes.

To accommodate this working preference, there is a Selection Filter. With theSelection Filter, you can specify which design objects are selectable. Items turnedoff in the list can't be selected.

You display attributes in the design as text labels. You can also add additionallabels to accommodate different size and location requirements for referencedesignators. The visibility and position of each label is managed within the Layout Editor.

You can predefine locations for attribute labels by adding placeholder labels in the PCB decal. The placeholders act as the defaults for new labels added or made visible in the Layout Editor.

Position the Name and Type labels in the decal where the text will not be obscured when visible.

1. Select button .

2. With nothing selected, right-click and click Select Text/Drafting.

3. Select each label and to move it press Ctrl+E.

4. Place them in the approximate location shown in the "Creating a PCB Decal"

section at the beginning of the tutorial.

5. Click to complete the moves.