关于RFFE的一些修改

1. 增加RFFE1的驱动电流

diff --git a/modem_proc/rfc_jolokia/rf_card/rfc_wtr4905_china_v2/common/src/rfc_wtr4905_china_v2_cmn_ag.cpp b/modem_proc/rfc_jolokia/rf_card/rfc_wtr4905_china_v2/common/src/rfc_wtr4905_china_v2_cmn_ag.cpp
index 97eb0b52a..82c7200f5 100755
--- a/modem_proc/rfc_jolokia/rf_card/rfc_wtr4905_china_v2/common/src/rfc_wtr4905_china_v2_cmn_ag.cpp
+++ b/modem_proc/rfc_jolokia/rf_card/rfc_wtr4905_china_v2/common/src/rfc_wtr4905_china_v2_cmn_ag.cpp
@@ -692,8 +692,9 @@ rfc_signal_info_type rfc_wtr4905_china_v2_sig_info[RFC_WTR4905_CHINA_V2_SIG_NUM
   { RFC_MSM_GPDATA0_0                       , RFC_CONFIG_ONLY, DAL_GPIO_NO_PULL, DAL_GPIO_2MA, (DALGpioIdType)NULL }, /* RFC_WTR4905_china_V2_GPDATA0_0 */ 
   { RFC_MSM_RFFE5_CLK                       , RFC_CONFIG_ONLY, DAL_GPIO_PULL_DOWN, DAL_GPIO_2MA, (DALGpioIdType)NULL }, /* RFC_WTR4905_china_V2_RFFE5_CLK */ 
   { RFC_MSM_RFFE5_DATA                      , RFC_CONFIG_ONLY, DAL_GPIO_PULL_DOWN, DAL_GPIO_2MA, (DALGpioIdType)NULL }, /* RFC_WTR4905_china_V2_RFFE5_DATA */ 
-  { RFC_MSM_RFFE1_CLK                       , RFC_CONFIG_ONLY, DAL_GPIO_PULL_DOWN, DAL_GPIO_2MA, (DALGpioIdType)NULL }, /* RFC_WTR4905_china_V2_RFFE1_CLK */ 
-  { RFC_MSM_RFFE1_DATA                      , RFC_CONFIG_ONLY, DAL_GPIO_PULL_DOWN, DAL_GPIO_2MA, (DALGpioIdType)NULL }, /* RFC_WTR4905_china_V2_RFFE1_DATA */ 
+//stone
+  { RFC_MSM_RFFE1_CLK                       , RFC_CONFIG_ONLY, DAL_GPIO_PULL_DOWN, DAL_GPIO_10MA, (DALGpioIdType)NULL }, /* RFC_WTR4905_china_V2_RFFE1_CLK */
+  { RFC_MSM_RFFE1_DATA                      , RFC_CONFIG_ONLY, DAL_GPIO_PULL_DOWN, DAL_GPIO_10MA, (DALGpioIdType)NULL }, /* RFC_WTR4905_china_V2_RFFE1_DATA */
   #ifndef NEOWAY_AM809_TRX4905_RFC_V1_0
   { RFC_MSM_RFFE2_CLK                       , RFC_CONFIG_ONLY, DAL_GPIO_PULL_DOWN, DAL_GPIO_2MA, (DALGpioIdType)NULL }, /* RFC_WTR4905_china_V2_RFFE2_CLK */ 
   { RFC_MSM_RFFE2_DATA                      , RFC_CONFIG_ONLY, DAL_GPIO_PULL_DOWN, DAL_GPIO_2MA, (DALGpioIdType)NULL }, /* RFC_WTR4905_china_V2_RFFE2_DATA */ 

这里参考高通的文档《80-NP408-2X_MSM8909_HARDWARE_REGISTER_DESCRIPTION》

要考虑寄生电容的影响。修改完成后可以用：
#cat /sys/kernel/debug/gpio 查看GPIO配置是否生效：
gpio66 : out 1 2mA pull down
gpio67 : out 1 2mA pull down
改后：
gpio66 : out 1 10mA pull down
gpio67 : out 1 10mA pull down

2. 在modem侧注释掉RFFE2和RFFE4 的配置：

diff --git a/modem_proc/core/systemdrivers/tlmm/config/msm8909/PlatformIO_MTP.xml b/modem_proc/core/systemdrivers/tlmm/config/msm8909/PlatformIO_MTP.xml
index 858ebd4b1..dd25ec4b9 100755