Woodward 9907-164提供两个人机界面(HMI)软件包,OpView™ 和505View,设计用于操作员远程查看操作输入、调整控制设定点、发布运行模式命令以及监控/故障排除Woodward汽轮机控制。两个HMI软件包都是自配置的,无需现场工程,因为它们会自动配置屏幕以匹配控件的编程应用程序。以下是每个HMI软件包的一些关键功能和细节:
OpView:
由一个工业化的NEMA 4触摸屏硬件包与Woodward开发的软件捆绑而成。
基于控制配置的自动屏幕生成。
实时趋势功能。
事件状态的日志记录功能。
505视图:
在PC上运行的未绑定的基于Intellution的软件包(可以选择购买硬件)。
基于控制配置的自动屏幕生成。
实时和历史趋势功能。
事件状态的日志记录和历史记录功能。
常见功能:
两个软件包都经过预配置,可通过Modbus®协议与505或505E Woodward汽轮机控制器进行通信。
基于控制配置的自动屏幕生成。
具有多个用户级别的安全性。
远程访问功能(仅在505View中提供)。
报警/跳闸状态指示。
带时间标记和先进先出指示的报警/跳闸日志。
I/O和系统故障排除。
图形系统控制屏幕。
事件状态日志记录和历史记录(仅在505View中提供)。
连接:
通过将OpView或505View连接到505 Modbus端口,它会自动配置屏幕以匹配505的编程应用程序。
如果505未配置为接受Modbus命令,则HMI仅起系统监视器的作用。
如果505被配置为接受Modbus命令,则所有505运行模式操作都可以通过它进行监控和执行(启动、停止、模式启用/禁用、设置点升高/降低)。
出于安全目的,不能通过HMI执行超速测试功能。
这些HMI软件包为操作员提供了用户友好的界面,用于监测、控制和故障排除Woodward汽轮机控制装置。自配置功能和Modbus协议支持有助于无缝集成和高效运行。
Woodward 9907-164 offers two Human-Machine Interface (HMI) software packages, OpView™ and 505View, designed for operators to remotely view operating inputs, adjust control setpoints, issue Run mode commands, and monitor/troubleshoot Woodward steam turbine controls. Both HMI packages are self-configuring, eliminating the need for field engineering, as they automatically configure their screens to match the control's programmed application. Here are some key features and details about each HMI package:
OpView:
- Consists of an industrialized NEMA 4 touchscreen hardware package bundled with Woodward-developed software.
- Automatic Screen Generation based on control configuration.
- Real-Time Trending functionality.
- Logging functionality for event status.
505View:
- An unbundled Intellution-based software package that runs on a PC (hardware can be optionally purchased).
- Automatic Screen Generation based on control configuration.
- Real-Time and Historical Trending functionalities.
- Logging and History functionalities for event status.
Common Features:
- Both packages are pre-configured to communicate via Modbus® protocol with either a 505 or 505E Woodward steam turbine control.
- Automatic Screen Generation based on control configuration.
- Security with multiple User Levels.
- Remote Access Capability (available in 505View only).
- Alarm/Trip Status Indication.
- Alarm/Trip Log with Time Tagging and First-Out Indication.
- I/O and System Troubleshooting.
- Graphic System Control screens.
- Event Status Logging and History (available in 505View only).
Connectivity:
- By connecting OpView or 505View to either 505 Modbus port, it automatically configures its screens to match the 505’s programmed application.
- If the 505 is not configured to accept Modbus commands, the HMI functions as a system monitor only.
- If the 505 is configured to accept Modbus commands, all 505 Run Mode operations can be monitored and performed through it (start, stop, mode enable/disable, setpoint raise/lower).
- The Overspeed test function cannot be performed through the HMI for safety purposes.
These HMI packages provide operators with user-friendly interfaces for monitoring, controlling, and troubleshooting Woodward steam turbine controls. The self-configuring feature and Modbus protocol support contribute to seamless integration and efficient operation.