RDCU-02C也可以由外部24 V直流电源供电

I/O电缆的屏蔽应接地至机柜的机箱，尽可能靠近RDCU。在所有电缆入口使用索环。小心处理光纤电缆。拔下光纤电缆时，一定要抓住连接器，而不是电缆本身。不要徒手触摸纤维的末端，因为纤维对污垢极为敏感。所含光纤电缆的最大长期拉伸载荷为1N；最小短期弯曲半径为25毫米（1英寸）。

RDCU通过接头X34供电。只要不超过1A的最大电流，该单元可以由逆变器（或IGBT电源）模块的电源板供电。RDCU也可以由外部24 V直流电源供电。还要注意的是，RDCU的电流消耗取决于所连接的可选模块。（有关可选模块的电流消耗，请参阅各自的用户手册。）

Stable processing capacity and automatic lifting and lowering control of cracking furnace
The production load of the cracking furnace has various control requirements, such as stabilizing at a fixed amount, adjusting the load according to instructions, or maximizing treatment under meeting process conditions.
The operation strategy of the APC controller is to meet a fixed amount. After the operator sets the total processing capacity of the cracking furnace, the controller will reasonably allocate the adjusted load of each branch furnace tube based on the distribution of COT in each branch furnace tube. At the same time, to ensure the stability of COT, the fuel gas and oxygen consumption are automatically matched to meet the requirements of both COT stability and cracking furnace processing capacity adjustment.

Hydrogenation reactor control
The hydrogenation reaction process is a very important link in the ethylene production process. Due to the sensitivity of the hydrogenation reaction and the lack of variable operating methods, it is difficult to achieve precise operation using conventional PID control. The APC controller takes the inlet temperature of the reactor and the mole fraction of each component at the inlet as the main control variables and interference variables, and takes the outlet temperature and component analysis of the reactor as the controlled variables. Under the premise of ensuring that the mole fraction of ethylene hydrocarbons in the discharged ethylene product does not exceed the standard, the reaction is stable, ethylene loss is minimized, and the operating cycle of the catalytic bed is long.
Considering that the molar fraction of exported ethylene hydrocarbons directly reflects the quality of exported gas products, and activity and selectivity are the most effective indicators of reaction smoothness, the control variables directly include the molar fraction of exported ethylene hydrocarbons, catalyst activity, and selectivity.