PFEA111-65 3BSE050090R65电子单元封装在专为壁挂式安装设计的外壳中

PFEA111-65电子单元封装在专为壁挂式安装设计的外壳中。以下是一些关键的安装说明和注意事项：

空间要求：确保有足够的空间完全打开机柜盖，并确保机柜前面有足够的工作空间。
电缆密封套：外壳配有电缆密封套，包括五个PFEA 111电缆密封套和六个PFEA 112电缆密封套。请参阅图2-4中提供的安装尺寸。

电缆连接：根据附件中提供的电缆图，将电缆连接到端子，具体取决于安装的称重传感器类型。避免将实心导体连接到端子上，也不要将引脚压接到绞线芯上。

电源电压连接：输入电源电压必须配备保险丝和张力电子装置外部的断开装置。

接地：PFEA111-20和PFEA112-20装置的金属底部连接到金属DIN导轨，用作张力电子接地连接器。这确保了内部逻辑、EMI抗扰度和RF发射的良好接地连接。DIN导轨必须连接到机柜的PE（保护接地）。对于耐腐蚀性，建议使用镀铬DIN导轨。使用星形垫圈和用于将DIN导轨固定到安装板的每个螺钉。用于固定DIN导轨的最小螺钉直径为5 mm，螺钉之间的最大距离为100 mm。
IP 20版本（未密封）：请参阅IP 20版本的安装尺寸和电缆连接说明。根据提供的图表，确保电缆端接正确。

通过遵循这些安装指南，用户可以确保PFEA111-65电子单元的正确安装和连接，促进其在预期应用中的功能和可靠性。

The PFEA111-65 electronic unit comes enclosed in an enclosure designed for wall mounting. Here are some key installation instructions and considerations:

1. Space Requirements: Ensure there is sufficient space to fully open the enclosure lid and ample working space in front of the enclosure.

2. Cable Glands: The enclosure is equipped with cable glands, including five PFEA 111 cable glands and six PFEA 112 cable glands. Refer to the installation dimensions provided in Figure 2-4.

3. Cable Connections: Connect the cables to the terminals according to the cable diagrams provided in the appendix, depending on the installed load cell type. Avoid connecting solid conductors to terminals and do not crimp pins to stranded cores.

4. Mains Voltage Connection: The incoming mains voltage must be equipped with fuses and a means of disconnection outside the tension electronics unit.

5. Earthing: The metal bottom of the PFEA111-20 and PFEA112-20 units connects to the metallic DIN-rail, serving as the tension electronics earth connector. This ensures a good earth connection for internal logic, EMI immunity, and RF emission. The DIN-rail must be connected to the PE (Protective Earth) of the cabinet. For corrosion resistance, chromium-plated DIN-rails are recommended. Use star washers with each screw used to fasten the DIN-rail to the mounting plate. The minimum screw diameter for fastening the DIN-rail is 5 mm, and the maximum distance between screws is 100 mm.

6. IP 20-Version (Unsealed): Refer to installation dimensions and cable connection instructions for the IP 20-version. Ensure proper cable termination according to the provided diagrams.

By following these installation guidelines, users can ensure the proper mounting and connection of the PFEA111-65 electronic unit, facilitating its functionality and reliability within the intended application.