【StructueEngineering】Pre-accepted Geotechnical Program of BD

hmywillstronger

已于 2024-09-29 01:14:22 修改

阅读量386

点赞数 7

文章标签：制造

于 2024-09-29 01:13:04 首次发布

本文链接：https://blog.csdn.net/hmywillstronger/article/details/142624716

版权

Ver.: 2017
专门用于地质工程项目中变形和稳定性分析的有限元软件包 (Finite element package specifically for deformation and stability analysis in geotechnical engineering projects)，
用于2D有限元分析，包括分阶段施工的开挖和侧向支撑工程 (2D finite element analysis including staged construction for excavation and lateral support works)，
采用全局系数法和稳态地下水渗流分析 (Global factor approach and steady state groundwater seepage analysis)，
通常仅使用线性弹性Mohr-Coulomb土壤模型 (Typically limited to linear elastic Mohr-Coulomb soil model)
Ver.: 2018
同上
Ver.: CE V20
同上
Ver.: CE V22
同上
Ver.: 2011
同上

Ver.: 2012
限于采用全局系数法的分阶段开挖与支撑或锚固，以及稳态渗流分析 (Limited to staged excavation and support or anchorage using global factor approach, and steady state seepage analysis)
Ver.: 8.2
限于采用全局系数法的分阶段开挖与支撑或锚固，以及稳态渗流分析 (Limited to staged excavation and support or anchorage using global factor approach, and steady state seepage analysis)，
仅应使用Mohr-Coulomb模型 (Only Mohr-Coulomb model should be used)

Ver.: CE V22
专门用于地质工程项目中3D变形和稳定性分析的有限元软件包 (Finite element package specifically for 3D deformation and stability analysis in geotechnical engineering projects)，
用于分阶段施工的开挖、侧向支撑工程和相关支撑系统 (Staged construction for excavation, lateral support works and associated support system)，
在静水压地下水压力条件下，仅使用线性弹性Mohr-Coulomb土壤模型 (Only linear elastic Mohr-Coulomb soil model under hydrostatic groundwater pressure condition)

Ver.: 2007
边坡稳定性分析 (Slope stability analysis)，
使用极限平衡理论计算土壤边坡的安全系数 (Factor of safety calculation for soil slopes using limit equilibrium theory)
Ver.: 2023
同上
Ver.: 2012
同上
Ver.: 2021
同上
Ver.: 4.21
同上

Ver.: 2012 (8.14)
解决饱和和非饱和多孔材料的稳态和瞬态渗流分析 (Steady-state and transient seepage analysis for saturated and unsaturated porous materials)，
适用于2D（垂直剖面）建模 (2D (vertical section) modeling)，
分析多孔材料（如土壤和岩石）中的地下水渗流和过剩孔隙水压力消散问题 (Analysis of groundwater seepage and excess pore water pressure dissipation problems in porous materials such as soil and rock)，
可应用于饱和或部分饱和的材料，适用于稳态和瞬态（时间依赖）问题 (Applicable to saturated or partially saturated materials, suitable for steady-state and transient (time-dependent) problems)
Ver.: 2007
同上
Ver.: 2023
同上
Ver.: 2021
同上

Ver.: 6.07
提交时排除了使用以下功能：楔形稳定性分析、使用BCS桩基手册方法的FOS计算、积分桥梁荷载和地震荷载 (Submission excludes the use of wedge stability analysis, FOS calculation using BCS pile manual method, integral bridge loading and earthquake loading)

Ver.: 6.0
岩土工程分析软件 (Rock engineering analysis software)，
排除了以下功能/特性：弯曲顶部、折叠分析、定向核心和岩体分类 (Excludes the following features: curved wrap, fold analysis, oriented core and rock mass classification)
Ver.: 5.0
岩土工程分析软件 (Rock engineering analysis software)

Ver.: 17.8
应用于常规方法的开挖和侧向支撑工程设计 (Excavation and lateral support works design using conventional method)，
分析不同施工阶段的柔性挡土墙（如板桩墙或隔膜墙）的位移、弯矩和剪力，以及墙体两侧的土压力 (Analysis of displacements, bending moments and shear forces in flexible retaining walls (e.g. sheet pile walls or diaphragm walls) and earth pressures on both sides of the wall at different construction stages)
Ver.: 19.2 (Global Factor Approach)
同上，应用全局系数法 (Global Factor Approach)
Ver.: 19.2 (Modified C580 Approach)
同上，应用修正的C580方法 (Modified C580 Approach)
Ver.: 19.4
同上
Ver.: 18.1
同上
Ver.: 19.0
同上

Ver.: Release 10
仅用于正常元素的后失效碎片运动分析 (Post-failure debris movement analysis for normal elements only)

Ver.: 21.0
二维稳定性分析 (Two-dimensional stability analysis)，
使用各种已建立的方法在研究的圆形和非圆形滑动面上定义孔隙压力分布 (Define pore pressure distributions on circular and non-circular slip surfaces under investigation using various established methods)，
使用切片法和各种已建立的方法计算切片间力 (Calculate interslice forces using slice method and various established methods)

Ver.: 2.0
获取支撑式板桩墙最低支撑处的嵌入深度和所需弯矩阻力 (Obtain embedment depth and required moment resistance at lowest support for propped sheet pile wall)

Ver.: 19.2
建筑物损坏评估功能被排除在此应用之外 (Building damage assessment function is excluded from this application)

Ver.: 10.0
岩石/巨砾/碎片与抗碎片屏障结构之间的耦合相互作用分析 (Coupled interaction analysis between rock/boulder/debris and debris-resisting barrier structures)
Ver.: 8.0
限于碎片移动性评估 (Limited to debris mobility assessment)

Ver.: 19.2
非线性土壤刚度特性功能被排除在此应用之外 (Non-linear soil stiffness characteristics function is excluded from this application)，
Legacy Mindlin方法和不带修正因子的New Mindlin方法功能被排除 (Legacy Mindlin method and New Mindlin method without modification factor functions are excluded)