中断函数使用
外部中断函数:
attachInterrupt(interrupt, function,mode)
外部中断只能用到数字IO口2/3, 表示中断0,1
interrupt 取值范围0,1
function 为中断处理函数
mode:
LOW 低电平中断,
CHANGE 有变化就中断
RISING 上升沿中断
FALLING 下降沿中断
detachInterrupt(interrupt)
中断使能函数
interrupts() 使能
noInterrupts() 禁止
interrupts()
Description
Re-enables interrupts (after they’ve been disabled by noInterrupts()). Interrupts allow certain important tasks to happen in the background and are enabled by default. Some functions will not work while interrupts are disabled, and incoming communication may be ignored. Interrupts can slightly disrupt the timing of code, however, and may be disabled for particularly critical sections of code.
Parameters
None
Returns
None
Example
void setup() {}
void loop()
{
noInterrupts();
// critical, time-sensitive code here
interrupts();
// other code here
}