Unknown: Failed to get convolution algorithm.

最新推荐文章于 2021-11-02 14:22:03 发布
最新推荐文章于 2021-11-02 14:22:03 发布
阅读量305 收藏
点赞数 1
文章标签： tensorflow 机器学习 神经网络 深度学习
版权声明：本文为博主原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接和本声明。
本文链接：https://blog.csdn.net/jiachang98/article/details/105438386
版权
  1. 一般可能是因为cudnn的版本没有安装对，先用下边命令来检测一下，看一下你cudnn的版本对应的对不对？  
    cat /usr/local/cuda/include/cudnn.h | grep CUDNN_MAJOR -A 2
#此命令适用于Ubuntu系统，如果是Windows，那么百度搜一下怎么检查cudnn版本

  2.        你的显存暴炸了，也就是GPU没有分配好，在你使用的代码中添加下边的代码就好了。        
    gpus = tf.config.experimental.list_physical_devices(device_type='GPU')
tf.config.experimental.set_memory_growth(gpus[0],True)
                                                                                                                                                                         
  3.  看看你的代码是不是有问题，tensorflow1.0写的代码，不能直接在tensorflow2.0以上版本运行
hello689
关注
  • 1
    点赞
  • 踩
  • 0
    收藏
    觉得还不错? 一键收藏
  • 打赏
    打赏
  • 0
    评论
【已解决】keras训练时遇到Unknown: Failed to get convolution algorithm.
栗子的博客
09-18 4295
运行卷积神经时出现了问题： tensorflow.python.framework.errors_impl.UnknownError: 2 root error(s) found. (0) **Unknown: Failed to get convolution algorithm. This is probably because cuDNN failed to initialize, so...
Failed to get convolution algorithm.
永康菌的博客
12-30 189
1.本机环境 运行环境：tensorfow1.14, CUDA10.0, Cudnn7.6.5.32， GPU:1660Ti, 现存6G, 2.运行报错 "Failed to get convolution algorithm. This is probably because cuDNN failed to initialize, so try looking to see if a warning log message was printed above." 3.解决方法 开头添加代码如.
2.Unknown: Failed to get convolution algorithm......错误总结
m0_52571323的博客
01-05 946
源代码 import os import cv2 import random import matplotlib.pyplot as plt #以下两行是jupyter notebook专有的代码，这两行可以让图像显示的更好 %matplotlib inline %config InlineBackend.figure_format = 'retina' path = 'train' filename = os.listdir(path) plt.figure(figsize = (12, 10))
【Bugs】Unknown Failed to get convolution algorithm
SUFEHeisenberg的博客
11-06 440
【Bugs】Unknown: Failed to get convolution algorithm. This is probably because cuDNN failed to initialize 问题说明 报错如下： tensorflow.python.framework.errors_impl.UnknownError: Failed to get convolution algorithm. This is probably because cuDNN failed to initializ
报错：Unknown: Failed to get convolution algorithm. This is probably because cuDNN failed to initial
JJJasmine的H君的博客
08-22 2955
一、问题描述 我在使用tensorflow-gpu的时候出现了报错：1) Unknown: Failed to get convolution algorithm. This is probably because cuDNN failed to initialize, so try looking to see if a warning log message was printed above.这个错误。 二、问题分析 1、这个报错信息翻译回中文，大概就是说无法获取...
StartAbort Unknown: Failed to get convolution algorithm. This is probably because cuDNN failed to in
Ubuntu18.04局域网共享文件夹，实现win7和Ubuntu本地访问
05-18 891
cuDNN初始化失败 W tensorflow/core/common_runtime/base_collective_executor.cc:217] BaseCollectiveExecutor::StartAbort Unknown: Failed to get convolution algorithm. This is probably because cuDNN failed to initialize, so try looking to see if a warning log m
完美解决问题：Failed to get convolution algorithm
热门推荐
CharlesMoCH的博客
11-04 1万+
写在前面 用pycharm或jupyter notebook运行卷积神经网络时会出现问题： Failed to get convolution algorithm. This is probably because cuDNN failed to initialize, so try looking to see if a warning log message was printed above...
UnknownError: Failed to get convolution algorithm. This is probably because cuDNN failed 报错 Jupyter
Welcome
11-02 414
未知错误：获取卷积算法失败。这可能是因为cuDNN失败了。 这可能是由于显存被占用，详细原因可看这篇。 关于keras or tensorflow 显存占用问题 ： keras or tensorflow 显存占用问题 - 简书 解决方法： 1. 如果用的是Keras，在jupyter notebook 最开始添加代码： import tensorflow as tf import numpy as np import keras config = tf.compat.v1.ConfigP
报错：tensorflow.python.framework.errors_impl.UnknownError: Failed to get convolution algorithm.
燕芝沛然的博客
01-17 1248
UnknownError: Failed to get convolution algorithm. 运行sess.run() 错误行标定这一行：sess.run(optimizer, feed_dict={ x: batch_x, y: batch_y, keep_prob: dropout } 显示错误信息：tensorflow.python.framework.errors_impl.Unk...
解决Failed to get convolution algorithm. This is probably because cuDNN failed to initialize
qq_38835585的博客
09-23 8324
问题如下： UnknownError (see above for traceback): Failed to get convolution algorithm. This is probably because cuDNN failed to initialize, so try looking to see if a warning log message was printed above. [[node conv2d_1/convolution (defined at C:\Us
【深度学习】Failed to get convolution algorithm. This is probably because cuDNN failed to initialize, so t
m0_52357468的博客
03-09 1094
本人TensorFlow-gpu 2.0 电脑显卡1650ti。 有时候电脑明明gpu没任何占用，跑深度学习代码还是会出现以下这个报错： UnknownError: 2 root error(s) found. (0) Unknown: Failed to get convolution algorithm. This is probably because cuDNN failed to initialize, so try looking to see if a warning log messa
(0) unknown: failed to get convolution algorithm. this is probably because cudnn failed to initialize, so try looking to see if a warning log message was printed above.
最新发布
04-11
Q: "b'(0) unknown: failed to get convolution algorithm. this is probably because cudnn failed to initialize, so try looking to see if a warning log message was printed above.'." 的意思是什么？ A: 这...
Unknown: Failed to get convolution algorithm. This is probably because cuDNN
jacke121的专栏
06-01 8008
Unknown: Failed to get convolution algorithm. This is probably because cuDNN https://www.jianshu.com/p/e13aa15f35da 我的解决办法： 添加下面两行 import os os.environ['CUDA_VISIBLE_DEVICES'] = '/gpu:0' 方法一：可能是Tensorflow-gpu版本太高，我报错时为1.12，可以将其降为1.9.0 pip install .
Unknown: Failed to get convolution algorithm. This is probably because cuDNN failed to initialize...
center-loss实现MNIST数据集
12-26 635
遇到以上问题是因为本人运行的代码需要tensorflow1.9.0,但是我的是1.14.0，查了很多办法都是降级版本，所以后来采用了如下方法，将其放到代码最前面即可解决： from tensorflow.compat.v1 import ConfigProto from tensorflow.compat.v1 import InteractiveSession config = Conf...
(0) Unknown: Failed to get convolution algorithm. This is probably because cuDNN failed to initial
FrankDura的博客
07-30 756
问题 (0) Unknown: Failed to get convolution algorithm. This is probably because cuDNN failed to initialize, so try looking to see if a warning log message was printed above. [[node Encoder_resnet/resnet_v2_50/conv1/Conv2D (defined at /media/frank/easystore/a
UnknownError: Failed to get convolution algorithm. This is probably because cuDNN failed to initiali
dec_lv4644的博客
07-05 2888
最近配置环境完成后运行模型时遇到报错，大部分博主说由于版本配置问题，建议tensorflow版本在1.14或者1.12的降级为1.9，还有许多博主采用重启大法，折腾了一个下午，目前个人找到的比较好的解决方案，个人版本为python3.7+tensorflow1.13， os.environ["CUDA_VISIBLE_DEVICES"] = '0' config = tf.ConfigProt...
解决Unknown: Failed to get convolution algorithm. This is probably because cuDNN failed to initialize
MacwinWin的博客
04-05 2251
今天在对一个TensorFlow v1版本的代码进行v2版适配的时候,出现报错: 2020-04-05 12:06:10.566479: I tensorflow/stream_executor/platform/default/dso_loader.cc:44] Successfully opened dynamic library libcudnn.so.7 2020-04-05 12:06:...
评论
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包

打赏作者

hello689

你的鼓励将是我创作的最大动力

¥1 ¥2 ¥4 ¥6 ¥10 ¥20
扫码支付：¥1
获取中
扫码支付

您的余额不足，请更换扫码支付或充值

打赏作者

实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值