第一天。。。

已于 2023-01-01 13:21:05 修改
阅读量307 收藏
点赞数 1
分类专栏： 静态路由实验 文章标签： 网络 服务器 运维
于 2022-12-30 16:37:55 首次发布
版权声明：本文为博主原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接和本声明。
本文链接：https://blog.csdn.net/m0_57702598/article/details/128497606
版权

各个接口的IP地址

[r1]display ip interface brief

*down: administratively down

^down: standby

(l): loopback

(s): spoofing

The number of interface that is UP in Physical is 5

The number of interface that is DOWN in Physical is 1

The number of interface that is UP in Protocol is 5

The number of interface that is DOWN in Protocol is 1

Interface                         IP Address/Mask      Physical   Protocol  

GigabitEthernet0/0/0              192.168.1.1/30       up         up        

GigabitEthernet0/0/1              192.168.1.5/30       up         up        

GigabitEthernet0/0/2              unassigned           down       down      

LoopBack0                         192.168.1.33/28      up         up(s)     

LoopBack1                         192.168.1.49/28      up         up(s)     

NULL0                             unassigned           up         up(s)     

[r2]display ip interface brief

*down: administratively down

^down: standby

(l): loopback

(s): spoofing

The number of interface that is UP in Physical is 5

The number of interface that is DOWN in Physical is 1

The number of interface that is UP in Protocol is 5

The number of interface that is DOWN in Protocol is 1

Interface                         IP Address/Mask      Physical   Protocol  

GigabitEthernet0/0/0              192.168.1.2/30       up         up        

GigabitEthernet0/0/1              192.168.1.9/30       up         up        

GigabitEthernet0/0/2              unassigned           down       down      

LoopBack0                         192.168.1.65/28      up         up(s)     

LoopBack1                         192.168.1.81/28      up         up(s)     

NULL0                             unassigned           up         up(s)     

[r3]display ip interface brief

*down: administratively down

^down: standby

(l): loopback

(s): spoofing

The number of interface that is UP in Physical is 4

The number of interface that is DOWN in Physical is 0

The number of interface that is UP in Protocol is 4

The number of interface that is DOWN in Protocol is 0

Interface                         IP Address/Mask      Physical   Protocol  

GigabitEthernet0/0/0              192.168.1.6/30       up         up        

GigabitEthernet0/0/1              192.168.1.14/30      up         up        

GigabitEthernet0/0/2              192.168.1.97/27      up         up        

NULL0                             unassigned           up         up(s)     

[r3]

[r4]display ip interface brief

*down: administratively down

^down: standby

(l): loopback

(s): spoofing

The number of interface that is UP in Physical is 7

The number of interface that is DOWN in Physical is 3

The number of interface that is UP in Protocol is 7

The number of interface that is DOWN in Protocol is 3

Interface                         IP Address/Mask      Physical   Protocol  

GigabitEthernet0/0/0              192.168.1.10/30      up         up        

GigabitEthernet0/0/1              192.168.1.13/30      up         up        

GigabitEthernet0/0/2              192.168.1.17/30      up         up        

GigabitEthernet4/0/0              192.168.1.21/30      up         up        

GigabitEthernet4/0/1              unassigned           down       down      

GigabitEthernet4/0/2              unassigned           down       down      

GigabitEthernet4/0/3              unassigned           down       down      

LoopBack0                         192.168.1.129/28     up         up(s)     

LoopBack1                         192.168.1.145/28     up         up(s)     

NULL0                             unassigned           up         up(s)     

[r4]

[r5]display ip interface brief

*down: administratively down

^down: standby

(l): loopback

(s): spoofing

The number of interface that is UP in Physical is 5

The number of interface that is DOWN in Physical is 4

The number of interface that is UP in Protocol is 4

The number of interface that is DOWN in Protocol is 5

Interface                         IP Address/Mask      Physical   Protocol  

GigabitEthernet0/0/0              192.168.1.18/30      up         up        

GigabitEthernet0/0/1              unassigned           up         down      

GigabitEthernet0/0/2              192.168.1.22/30      up         up        

GigabitEthernet4/0/0              unassigned           down       down      

GigabitEthernet4/0/1              unassigned           down       down      

GigabitEthernet4/0/2              unassigned           down       down      

GigabitEthernet4/0/3              unassigned           down       down      

LoopBack0                         192.168.1.161/27     up         up(s)     

NULL0                             unassigned           up         up(s)     

[r5]

[r6]display ip interface brief

*down: administratively down

^down: standby

(l): loopback

(s): spoofing

The number of interface that is UP in Physical is 3

The number of interface that is DOWN in Physical is 2

The number of interface that is UP in Protocol is 2

The number of interface that is DOWN in Protocol is 3

Interface                         IP Address/Mask      Physical   Protocol  

GigabitEthernet0/0/0              unassigned           up         down      

GigabitEthernet0/0/1              unassigned           down       down      

GigabitEthernet0/0/2              unassigned           down       down      

LoopBack0                         1.1.1.1/24           up         up(s)     

NULL0                             unassigned           up         up(s)     

[r6]

配置

The device is running!

<r1>

Mar 20 2022 18:41:16-08:00 r1 %%01IFPDT/4/IF_STATE(l)[0]:Interface GigabitEthern

et0/0/0 has turned into UP state.

<r1>

Mar 20 2022 18:41:16-08:00 r1 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP

on the interface GigabitEthernet0/0/0 has entered the UP state.

<r1>

Mar 20 2022 18:41:18-08:00 r1 %%01IFPDT/4/IF_STATE(l)[2]:Interface GigabitEthern

et0/0/1 has turned into UP state.

<r1>

Mar 20 2022 18:41:18-08:00 r1 %%01IFNET/4/LINK_STATE(l)[3]:The line protocol IP

on the interface GigabitEthernet0/0/1 has entered the UP state.

<r1>sys

Enter system view, return user view with Ctrl+Z.

[r1]display ip int

[r1]display ip interface br

[r1]display ip interface brief

*down: administratively down

^down: standby

(l): loopback

(s): spoofing

The number of interface that is UP in Physical is 5

The number of interface that is DOWN in Physical is 1

The number of interface that is UP in Protocol is 5

The number of interface that is DOWN in Protocol is 1

Interface                         IP Address/Mask      Physical   Protocol  

GigabitEthernet0/0/0              192.168.1.1/30       up         up        

GigabitEthernet0/0/1              192.168.1.5/30       up         up        

GigabitEthernet0/0/2              unassigned           down       down      

LoopBack0                         192.168.1.33/28      up         up(s)     

LoopBack1                         192.168.1.49/28      up         up(s)     

NULL0                             unassigned           up         up(s)     

[r1]

<r1>sy

Enter system view, return user view with Ctrl+Z.

[r1]ip rout

[r1]ip route-

[r1]ip route-static 0.0.0.0 192.168.1.2

                                        ^

Error:Incomplete command found at '^' position.

[r1]ip route-static 0.0.0.0 0 192.168.1.2

[r1]ip route-static 0.0.0.0 0 192.168.1.6

[r1]ip rou

[r1]ip route-

[r1]ip route-static 192.168.1.64 27 192.168.1.2

[r1]ip rou

[r1]ip route-static 192.168.1.96 27 192.168.1.6

[r1]ip rou

[r1]ip route-static 192.168.1.128 27 192.168.1.2

[r1]ip route-static 192.168.1.128 27 192.168.1.6

[r1]

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<r1>sy

Enter system view, return user view with Ctrl+Z.

[r1]ping 192.168.1.2

  PING 192.168.1.2: 56  data bytes, press CTRL_C to break

    Reply from 192.168.1.2: bytes=56 Sequence=1 ttl=255 time=100 ms

    Reply from 192.168.1.2: bytes=56 Sequence=2 ttl=255 time=20 ms

    Reply from 192.168.1.2: bytes=56 Sequence=3 ttl=255 time=30 ms

    Reply from 192.168.1.2: bytes=56 Sequence=4 ttl=255 time=10 ms

    Reply from 192.168.1.2: bytes=56 Sequence=5 ttl=255 time=20 ms

  --- 192.168.1.2 ping statistics ---

    5 packet(s) transmitted

    5 packet(s) received

    0.00% packet loss

    round-trip min/avg/max = 10/36/100 ms

[r1]

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

The device is running!

<r2>sy

Enter system view, return user view with Ctrl+Z.

[r2]dis

[r2]display ip

[r2]display ip in

[r2]display ip interface br

[r2]display ip interface brief

*down: administratively down

^down: standby

(l): loopback

(s): spoofing

The number of interface that is UP in Physical is 5

The number of interface that is DOWN in Physical is 1

The number of interface that is UP in Protocol is 5

The number of interface that is DOWN in Protocol is 1

Interface                         IP Address/Mask      Physical   Protocol  

GigabitEthernet0/0/0              192.168.1.2/30       up         up        

GigabitEthernet0/0/1              192.168.1.9/30       up         up        

GigabitEthernet0/0/2              unassigned           down       down      

LoopBack0                         192.168.1.65/28      up         up(s)     

LoopBack1                         192.168.1.81/28      up         up(s)     

NULL0                             unassigned           up         up(s)     

[r2]

<r2>sy

Enter system view, return user view with Ctrl+Z.

[r2]ip r

[r2]ip rd-filter

[r2]ip relay

[r2]ip route-

[r2]ip route-static

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<r2>sy

Enter system view, return user view with Ctrl+Z.

[r2]ip rou

[r2]ip route-

[r2]ip route-static 192.168.1.32 27 192.168.1.1

[r2]ip route-static 192.168.1.4 30 192.168.1.1

[r2]ip route-static 192.168.1.96 27 192.168.1.1

[r2]ip route-static 192.168.1.96 27 192.168.1.10

[r2]

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

The device is running!

<r3>sy

Enter system view, return user view with Ctrl+Z.

[r3]dis

[r3]display ip in

[r3]display ip interface br

[r3]display ip interface brief

*down: administratively down

^down: standby

(l): loopback

(s): spoofing

The number of interface that is UP in Physical is 4

The number of interface that is DOWN in Physical is 0

The number of interface that is UP in Protocol is 4

The number of interface that is DOWN in Protocol is 0

Interface                         IP Address/Mask      Physical   Protocol  

GigabitEthernet0/0/0              192.168.1.6/30       up         up        

GigabitEthernet0/0/1              192.168.1.14/30      up         up        

GigabitEthernet0/0/2              192.168.1.97/27      up         up        

NULL0                             unassigned           up         up(s)     

[r3]

<r3>

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<r3>sy

Enter system view, return user view with Ctrl+Z.

[r3]ip ro

[r3]ip route-

[r3]ip route-static 192.168.1.32 27 192.168.1.5

[r3]ip route-static 192.168.1.0 30 192.168.1.5

[r3]ip route-static 192.168.1.64 27 192.168.1.5

[r3]

Mar 20 2022 19:36:40-08:00 r3 ARP/4/ARP_IPCONFLICT_TRAP:OID 16777216.50331648.10

0663296.16777216.67108864.16777216.3674669056.83886080.419430400.2063597568.3355

4432.100663296 ARP detects IP conflict. (IP address=14.1.168.192, Local interfac

e=GigabitEthernet0/0/1, Local MAC=00e0-fcac-7f20, Local vlan=0, Local CE vlan=0,

 Receive interface=GigabitEthernet0/0/1, Receive MAC=00e0-fc69-6cc4, Receive vla

n=0, Receive CE vlan=0, IP conflict type=Local IP conflict).

[r3]

Mar 20 2022 19:36:40-08:00 r3 %%01ARP/4/ARP_DUPLICATE_IPADDR(l)[0]:Received an A

RP packet with a duplicate IP address from the interface. (IpAddress=14.1.168.19

2, InterfaceName=GigabitEthernet0/0/1, MacAddress=00e0-fc69-6cc4)

[r3]

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<r3>sy

Enter system view, return user view with Ctrl+Z.

[r3]un

[r3]undo ip ad

[r3]undo ip ad

[r3]int

[r3]interface g 0/0/1

[r3-GigabitEthernet0/0/1]und

[r3-GigabitEthernet0/0/1]undo ip ad

[r3-GigabitEthernet0/0/1]undo ip address 192.168.1.14 30

Mar 20 2022 19:41:20-08:00 r3 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP

on the interface GigabitEthernet0/0/1 has entered the DOWN state.

[r3-GigabitEthernet0/0/1]q

[r3]di

[r3]dialer

[r3]dialer-rule

[r3]display ip in

[r3]display ip interface b

[r3]display ip interface brief

*down: administratively down

^down: standby

(l): loopback

(s): spoofing

The number of interface that is UP in Physical is 4

The number of interface that is DOWN in Physical is 0

The number of interface that is UP in Protocol is 3

The number of interface that is DOWN in Protocol is 1

Interface                         IP Address/Mask      Physical   Protocol  

GigabitEthernet0/0/0              192.168.1.6/30       up         up        

GigabitEthernet0/0/1              unassigned           up         down      

GigabitEthernet0/0/2              192.168.1.97/27      up         up        

NULL0                             unassigned           up         up(s)     

[r3]int

[r3]interface g 0/0/1

[r3-GigabitEthernet0/0/1]ip ad

[r3-GigabitEthernet0/0/1]ip address 192.168.1.13 30

Mar 20 2022 19:44:03-08:00 r3 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP

on the interface GigabitEthernet0/0/1 has entered the UP state.

[r3-GigabitEthernet0/0/1]q

[r3]ip ro

[r3]ip route-

[r3]ip route-static 192.168.1.64 27 192.168.1.14

[r3]

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

The device is running!

<r4>sy

Enter system view, return user view with Ctrl+Z.

[r4]di

[r4]dialer

[r4]dialer-rule

[r4]display ip

[r4]display ip in

[r4]display ip interface b

[r4]display ip interface brief

*down: administratively down

^down: standby

(l): loopback

(s): spoofing

The number of interface that is UP in Physical is 7

The number of interface that is DOWN in Physical is 3

The number of interface that is UP in Protocol is 7

The number of interface that is DOWN in Protocol is 3

Interface                         IP Address/Mask      Physical   Protocol  

GigabitEthernet0/0/0              192.168.1.10/30      up         up        

GigabitEthernet0/0/1              192.168.1.13/30      up         up        

GigabitEthernet0/0/2              192.168.1.17/30      up         up        

GigabitEthernet4/0/0              192.168.1.21/30      up         up        

GigabitEthernet4/0/1              unassigned           down       down      

GigabitEthernet4/0/2              unassigned           down       down      

GigabitEthernet4/0/3              unassigned           down       down      

LoopBack0                         192.168.1.129/28     up         up(s)     

LoopBack1                         192.168.1.145/28     up         up(s)     

NULL0                             unassigned           up         up(s)     

[r4]

<r4>sy

Enter system view, return user view with Ctrl+Z.

[r4]

[r4]ip ad

[r4]int

[r4]interface g 0/0/1

[r4-GigabitEthernet0/0/1]ip ad

[r4-GigabitEthernet0/0/1]ip address 192.168.14 30

                                    ^

Error: Wrong parameter found at '^' position.

[r4-GigabitEthernet0/0/1]ip address 192.168.1.14 30

[r4-GigabitEthernet0/0/1]

Mar 20 2022 19:36:40-08:00 r4 ARP/4/ARP_IPCONFLICT_TRAP:OID 16777216.50331648.10

0663296.16777216.67108864.16777216.3674669056.83886080.419430400.2063597568.3355

4432.100663296 ARP detects IP conflict. (IP address=14.1.168.192, Local interfac

e=GigabitEthernet0/0/1, Local MAC=00e0-fc69-6cc4, Local vlan=0, Local CE vlan=0,

 Receive interface=GigabitEthernet0/0/1, Receive MAC=00e0-fcac-7f20, Receive vla

n=0, Receive CE vlan=0, IP conflict type=Local IP conflict).

[r4-GigabitEthernet0/0/1]

Mar 20 2022 19:36:40-08:00 r4 %%01ARP/4/ARP_DUPLICATE_IPADDR(l)[0]:Received an A

RP packet with a duplicate IP address from the interface. (IpAddress=14.1.168.19

2, InterfaceName=GigabitEthernet0/0/1, MacAddress=00e0-fcac-7f20)

[r4-GigabitEthernet0/0/1]q

[r4]di

[r4]dialer

[r4]dialer-rule

[r4]display ip i

[r4]display ip interface br

[r4]display ip interface brief

*down: administratively down

^down: standby

(l): loopback

(s): spoofing

The number of interface that is UP in Physical is 7

The number of interface that is DOWN in Physical is 3

The number of interface that is UP in Protocol is 7

The number of interface that is DOWN in Protocol is 3

Interface                         IP Address/Mask      Physical   Protocol  

GigabitEthernet0/0/0              192.168.1.10/30      up         up        

GigabitEthernet0/0/1              192.168.1.14/30      up         up        

GigabitEthernet0/0/2              192.168.1.17/30      up         up        

GigabitEthernet4/0/0              192.168.1.21/30      up         up        

GigabitEthernet4/0/1              unassigned           down       down      

GigabitEthernet4/0/2              unassigned           down       down      

GigabitEthernet4/0/3              unassigned           down       down      

LoopBack0                         192.168.1.129/28     up         up(s)     

LoopBack1                         192.168.1.145/28     up         up(s)     

NULL0                             unassigned           up         up(s)     

[r4]

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<r4>0000000000000000000000000000000000000000000000000000000000000000000000000000

00000000000000000000000000000000000000000000000000000000000000000000000000000000

00000000000000000000000000000000000000000000000000000000000000000000000000000000

00000000000000000000000000000000000000000000000000000000000000000000000000000000

00000000000000000000000000000000000000000000000000000000000000000000000000000000

00000000000000000000000000000000000000000000000000000000000000000000000000000000

0000000000000000

    ^

Error: Unrecognized command found at '^' position.

<r4>

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<r4>sys

Enter system view, return user view with Ctrl+Z.

[r4]ip rou

[r4]ip route-

[r4]ip route-static 192.168.1.64 27 192.168.1.9

[r4]ip route-static 192.168.1.0 30 192.168.1.9

[r4]ip ro

[r4]ip route-

[r4]ip route-static 192.168.1.32 27 192.168.1. .?

                                    ^

Error: Wrong parameter found at '^' position.

[r4]ip route-static 192.168.1.32 27 192.168.1. .?

                                    ^

Error: Wrong parameter found at '^' position.

[r4]ip route-static 192.168.1.32 27 192.168.1. .

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<r4>sy

Enter system view, return user view with Ctrl+Z.

[r4]ip r

[r4]ip rd-filter

[r4]ip relay

[r4]ip route-

[r4]ip route-static 192.168.1.4 30 192.168.1.13

[r4]ip route-static 192.168.1.96 27 192.168.1.13

[r4]ip route-static 192.168.1.32 27 192.168.1.13

[r4]ip route-static 192.168.1.32 27 192.168.1.9

[r4]

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

The device is running!

<r5>sy

Enter system view, return user view with Ctrl+Z.

[r5]dis

[r5]display ip int

[r5]display ip interface

[r5]display ip interface b

[r5]display ip interface brief

*down: administratively down

^down: standby

(l): loopback

(s): spoofing

The number of interface that is UP in Physical is 5

The number of interface that is DOWN in Physical is 4

The number of interface that is UP in Protocol is 4

The number of interface that is DOWN in Protocol is 5

Interface                         IP Address/Mask      Physical   Protocol  

GigabitEthernet0/0/0              192.168.1.18/30      up         up        

GigabitEthernet0/0/1              unassigned           up         down      

GigabitEthernet0/0/2              192.168.1.22/30      up         up        

GigabitEthernet4/0/0              unassigned           down       down      

GigabitEthernet4/0/1              unassigned           down       down      

GigabitEthernet4/0/2              unassigned           down       down      

GigabitEthernet4/0/3              unassigned           down       down      

LoopBack0                         192.168.1.161/27     up         up(s)     

NULL0                             unassigned           up         up(s)     

[r5]

<r5>

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<r5>sy

Enter system view, return user view with Ctrl+Z.

[r5]ip r

[r5]ip rd-filter

[r5]ip relay

[r5]ip route-

[r5]ip route-static 192.168.1.32 27 192.168.1.17

[r5]ip route-static 192.168.1.96 27 192.168.1.17

[r5]ip route-static 192.168.1.96 64 192.168.1.17

                                 ^

Error: Wrong parameter found at '^' position.

[r5]ip route-static 192.168.1.96 27 192.168.1.17

Error: The route already exists.

[r5]ip route-static 192.168.1.64 27 192.168.1.17

[r5]ip route-static 192.168.1.128 27 192.168.1.17

[r5]ip route-static 192.168.1.0 30 192.168.1.17

[r5]ip route-static 192.168.1.4 30 192.168.1.17

[r5]ip route-static 192.168.1.8 30 192.168.1.17

[r5]ip route-static 192.168.1.12 30 192.168.1.17

[r5]ip route-static 192.168.1.32 27 192.168.1.21 pr

[r5]ip route-static 192.168.1.32 27 192.168.1.21 preference 61

[r5]ip route-static 192.168.1.64 27 192.168.1.21 preference 61

[r5]ip route-static 192.168.1.96 27 192.168.1.21 preference 61

[r5]ip route-static 192.168.1.128 27 192.168.1.21 preference 61

[r5]ip route-static 192.168.1.0 30 192.168.1.21 preference 61

[r5]ip route-static 192.168.1.4 30 192.168.1.21 preference 61

[r5]ip route-static 192.168.1.8 30 192.168.1.21 preference 61

[r5]ip route-static 192.168.1.12 30 192.168.1.21 preference 61

[r5]acl 2000

[r5-acl-basic-2000]ru

[r5-acl-basic-2000]rule per

[r5-acl-basic-2000]rule permit sou

[r5-acl-basic-2000]rule permit source 192.168.1.0 0.0.0.255

[r5-acl-basic-2000]q

[r5]int g0/0/1

[r5-GigabitEthernet0/0/1]nat outbound 2000

 Info: The NAT address pool is empty

[r5-GigabitEthernet0/0/1]nat outbound 2000?

  2000  Apply basic or advanced ACL

[r5-GigabitEthernet0/0/1]nat outbound 2000

  Error: Easy IP has been configed in this interface.

[r5-GigabitEthernet0/0/1]q

[r5]acl 2000

[r5-acl-basic-2000]ru

[r5-acl-basic-2000]rule ?

  INTEGER<0-4294967294>  ID of ACL rule

  deny                   Specify matched packet deny

  permit                 Specify matched packet permit

[r5-acl-basic-2000]rule permit?

  permit  Specify matched packet permit

[r5-acl-basic-2000]rule permit so

[r5-acl-basic-2000]rule permit source 192.168.1.0 0.0.0.0

[r5-acl-basic-2000]q

[r5]int g0/0/1

[r5-GigabitEthernet0/0/1]nat outbound 2000

  Error: Easy IP has been configed in this interface.

[r5-GigabitEthernet0/0/1]nat?

  nat  Specify NAT(Network Address Translation) configuration information

[r5-GigabitEthernet0/0/1]trta

[r5-GigabitEthernet0/0/1]tra

[r5-GigabitEthernet0/0/1]tracert

[r5-GigabitEthernet0/0/1]traffic-filter ou

[r5-GigabitEthernet0/0/1]traffic-filter outbound 2000

                                                 ^

Error: Unrecognized command found at '^' position.

[r5-GigabitEthernet0/0/1]traffic-filter outbound?

  outbound  Apply ACL to the outbound direction of the interface

[r5-GigabitEthernet0/0/1]nat outbound 2000 ?

  address-group  IP address-group of NAT

  interface      Specify the interface

  <cr>           Please press ENTER to execute command

[r5-GigabitEthernet0/0/1]traffic-filter outbound 2000

                                                 ^

Error: Unrecognized command found at '^' position.

[r5-GigabitEthernet0/0/1]q

[r5]dis

[r5]display acl 2000

Basic ACL 2000, 2 rules

Acl's step is 5

 rule 5 permit source 192.168.1.0 0.0.0.255

 rule 10 permit source 192.168.1.0 0

[r5]un

[r5]in

[r5]info-center

[r5]interface g0/0/1

[r5-GigabitEthernet0/0/1]

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<r5>sy

Enter system view, return user view with Ctrl+Z.

[r5]int

[r5]interface g 0/0/1

[r5-GigabitEthernet0/0/1]ip ad

[r5-GigabitEthernet0/0/1]ip address 12.0.0.1 24

Mar 20 2022 22:29:18-08:00 r5 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP

on the interface GigabitEthernet0/0/1 has entered the UP state.

[r5-GigabitEthernet0/0/1]

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

The device is running!

<r6>

<r6>sy

Enter system view, return user view with Ctrl+Z.

[r6]dis

[r6]display ip

[r6]display ip in

[r6]display ip interface b

[r6]display ip interface brief

*down: administratively down

^down: standby

(l): loopback

(s): spoofing

The number of interface that is UP in Physical is 3

The number of interface that is DOWN in Physical is 2

The number of interface that is UP in Protocol is 2

The number of interface that is DOWN in Protocol is 3

Interface                         IP Address/Mask      Physical   Protocol  

GigabitEthernet0/0/0              unassigned           up         down      

GigabitEthernet0/0/1              unassigned           down       down      

GigabitEthernet0/0/2              unassigned           down       down      

LoopBack0                         1.1.1.1/24           up         up(s)     

NULL0                             unassigned           up         up(s)     

[r6]

<r6>sy

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<r6>sy

Enter system view, return user view with Ctrl+Z.

[r6]int

[r6]interface g0/0/0

[r6-GigabitEthernet0/0/0]ip ad

[r6-GigabitEthernet0/0/0]ip address 12.0.0.2 24

Mar 20 2022 22:28:31-08:00 r6 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP

on the interface GigabitEthernet0/0/0 has entered the UP state.

[r6-GigabitEthernet0/0/0]

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

Glorious00
关注
专栏目录
pandas获取DataFrame每月(每年)第一天或者最后一天对应行的实战代码
weixin_43178406的博客
05-26 1万+
本文主要介绍了pandas获取DataFrame每月(每年)第一天对应行的实战代码，希望能对学习pandas的同学们有所帮助。 文章目录 1. 问题描述 2. 解决方案 2.1 筛选每月第一天所有行的数据 2.2 筛选每月最后一天所有行的数据 2.3 筛选每年第一天所有行的数据 2.4 筛选每年最后一天所有行的数据
yolov8实战第一天——yolov8部署并训练自己的数据集（保姆式教程）
最新发布
qq_34717531的博客
12-15 2万+
YOLOv8是一种基于深度神经网络的目标检测算法，它是YOLO（You Only Look Once）系列目标检测算法的最新版本。YOLOv8的主要改进包括：更高的检测精度：通过引入更深的卷积神经网络和更多的特征层，YOLOv8可以在保持实时性的同时提高检测精度。更快的检测速度：通过对模型进行优化，YOLOv8可以在不降低检测精度的情况下提高检测速度。支持更多的检测任务：除了传统的物体检测任务之外，YOLOv8还支持人脸检测、车辆检测等更多的检测任务。
ensp 中的NAT (网络地址转换)
hwhale的博客
01-10 9508
NAT（Network Address Translation，网络地址转换）技术的产生主要是为了解决公网 ip地址不够的问题，另外为了安全，一些公司也用nat技术来保护服务器。 nat的分类 [AR1-GigabitEthernet0/0/0]nat ? outbound Specify net address translation server Specify NAT server static Specify static NAT 如上：nat主要包括三类，（1）静态
三层网络架构大实验
yulong0816的博客
07-20 1374
三层网络架构大实验 tips：本实验为三层网络架构综合性非常强的一个实验，可能会有一些地方写的不够具体，望各位大佬随时批评指教！ 一、实验要求 ①ISP公有地址，有环回； ②内网IP地址172.16.0.0/16，合理分配； ③SW1与SW2之间互为备份； ④VLAN/Eth-Trunk/STP/SVI/VRRP技术均使用； ⑤所有PC均通过DHCP自动获取IP地址； ⑥PC1/3在Vlan1，PC2/4在Vlan2。 二、实验拓扑 三、创建通道接口 1、lsw1： [lsw1-GigabitEther
ensp错误提示解析详解
xiaobai729的博客
04-02 1万+
ensp错误解析，能够读懂这四种错误信息提示，可以让你工作学习事半功倍，有兴趣的同学可以看看
HCIA NAT详解
weixin_68256171的博客
08-09 309
NAT（Network Address Translation）即网络地址转换 —— 在网络的边界路由器上进行公有与私有ip地址间转换NAT是将私有IP地址通过边界路由转换成外网IP地址，在边界路由的NAT地址转换表记录下这个转换映射记录，当外部数据返回时，路由使用NAT技术查询NAT转换表，再将目标地址替换成内网用户IP地址。从内网（内部）向外网（外部）传输数据包时修改源ip地址，从外部进入内部时修改目标ip地址；
hcip06 ospf特殊区域综合实验
qq_45476645的博客
07-30 439
hcip06 ospf特殊区域综合实验
java 获取本年第一天_java获取年份的第一天和最后一天
weixin_34434843的博客
02-13 4067
下面是编程之家 jb51.cc 通过网络收集整理的代码片段。编程之家小编现在分享给大家，也给大家做个参考。package com.dada.test;import java.text.SimpleDateFormat;import java.util.Calendar;import java.util.Date;/*** @author li_yueling* @version 1.0 2011-...
oracle取去年的最后一天,oracle本月、上月、去年同月第一天最后一天
weixin_35758982的博客
04-11 7854
select trunc(sysdate, 'month') 本月第一天,trunc(last_day(sysdate)) 本月最后一天,trunc(add_months(sysdate, -1), 'month') 上月第一天,trunc(last_day(add_months(sysdate, -1))) 上月最后一天,trunc(add_months(sysdate, -12), 'mont...
前端入职第一天该做什么?
laoli360的博客
10-25 5906
嘿嘿 很多学习的同志们 上岸了 拿到自己心仪的offer 准备入职 如果是第一次入职 难免会有很多的好奇和担忧,为了避免各位第一天麻爪,让别人感觉自己很low 这里我会描述入职第一天需要做什么,这里结合本人和网络上其他工作了数年前端经验的前端攻城狮的经验 对入职第一天需要做的事情进行总结: 数据来源于网络 如有侵权 请第一时间私信我,我会及时删除. 入职欢迎仪式 签订入职协议 新人入职培训 配置开发环境 开通相关账号 熟悉公司规范 熟悉项目代码 入职欢迎仪式 新..
eNsp实验之EasyIP
01-09
eNsp实验之EasyIP
NAT在PPPOE中的配置
weixin_34390996的博客
08-05 2836
一、了解NAT 网络地址转换NAT(network address translation)，用于实现内部网络（私有ip地址）的主机访问外部网络（公有ip地址）的功能。NAT一般部署在连接内网络和外网的网关设备上，NAT的实现方式有：静态NAT,动态NAT，网络地址端口转换NAPT（Network Address Port Translation），Easy Ip ，配置NAT服务器。 ...
HCIA综合实验
GODMAO666的博客
11-04 937
HCIA综合实验
华为Easy-IP配置指南
11-27 2万+
Easy IP配置普遍的设备都使用此配置   PAT acl 2000 rule  5  permit  source 192.168.10.0  0.0.0.255 quit interface serial 1/0/0    WAN接口 nat outbound 2000 配置缺省路由： ip route-static0.0.0.0 0.0.0.0  ISP服务商网关   N
2021-05-27
m0_56229717的博客
05-27 625
拓扑图 R1 Please press enter to start cmd line! <r1> May 26 2021 20:04:16-08:00 r1 %%01IFPDT/4/IF_STATE(l)[0]:Interface GigabitEthern et0/0/1 has turned into UP state. <r1> May 26 2021 20:04:20-08:00 r1 %%01IFPDT/4/IF_STATE(l)[1]:In...
配置easy-ip
qq_73212565的博客
08-22 1万+
这里的小型局域网主要指中小型网吧、小型办公室等环境，一般具有以下特点：内部主机较少、出接口通过拨号方式获得临时（或固定）公网IP地址以供内部主机访问Internet。可以帮助你轻松隐藏你的真实的IP,防止您的网上活动被监视或您的个人信息的被黑客窃取,其工作原理是：Easy IP。可以轻松隐藏真实的IP，防止网上活动被监视或个人信息的被黑客窃取。第二步：接着规划slw1的vlan为access接口和vlanif。第一步：添加各个pc和sever1的IP地址，子网掩码及网关。第六步：查看nat配置。
[华为] 接口下配置IP地址不成功
Hello
05-06 2654
一个接口只能有一个主IP地址，当配置主IP地址时，如果接口上已经有主IP地址，则原主IP地址被删除，新配置的地址成为主IP地址。Tips：来自华为官方的解释，对我这种英语短板选手来说很有帮助，希望能帮到你们！在接口上配置的从IP地址超过最大数目，无法继续配置从IP地址。接口下配置IP地址过程中出现错误，导致IP地址配置不成功。默认情况下，每个接口下最多可以配置256个IP地址。删除的主地址不存在。
网络工程生产实习——构建中小型企业网（eNSP）
热门推荐
夏佳怡的博客
12-12 3万+
应急管理大学网络工程专业生产实习，搭建中小型企业网
华为静态、动态NAT地址转换及静态端口映射
石头城云计算的博客
11-06 3397
Demo1：静态NAT地址转换 eNSP中拓扑： SW1： <Huawei>sys [Huawei]sysname SW1 [SW1]vlan batch 10 20 30 40 Info: This operation may take a few seconds. Please wait for a moment...done. [SW1]int vlanif10 [SW1-V...
oracle第一天函数
08-08
Oracle是一种关系数据库管理系统（RDBMS），其中包含了许多强大的函数以帮助用户处理数据。在Oracle的函数中，第一天函数（FIRST_DAY）是一个常用的函数，用于获取给定日期的月份的第一天。 首先，要使用FIRST_DAY函数，我们需要提供一个日期作为输入参数。这个日期可以是一个具体的日期，也可以是一个日期值的列或表达式。 当传入一个具体的日期时，FIRST_DAY函数会返回该日期所属月份的第一天。例如，如果传入的日期是2021年6月15日，则FIRST_DAY函数将返回2021年6月1日。 如果传入的是一个日期值的列或表达式，FIRST_DAY函数将应用于每个值，并返回每个日期所属月份的第一天。这对于在查询中获取每个月份的第一天非常有用。 此外，FIRST_DAY函数还可以添加一个可选的参数，用于指定一周的开始日期。默认情况下，Oracle将星期天设置为一周的开始日期，但我们可以通过提供另一个值来更改它。有效的参数值包括1-7，分别代表一周的第一天从星期一到星期日。 总之，Oracle的FIRST_DAY函数是一个方便的工具，可以帮助用户轻松地获取给定日期或日期列所属月份的第一天。它可以用于各种场景，例如在查询中计算每个月份的统计数据或生成月度报表。
评论
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值