。。。。。。

最新推荐文章于 2024-05-29 22:15:41 发布
最新推荐文章于 2024-05-29 22:15:41 发布
阅读量92 收藏
点赞数
文章标签： 服务器 运维
版权声明：本文为博主原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接和本声明。
本文链接：https://blog.csdn.net/m0_74812057/article/details/127870907
版权

<Huawei>system-view
[Huawei]sysname r2
[r2]user-interface console 0
[r2-ui-console0]idle-timeout 0 0
[r2-ui-console0]dhcp enable
Info: The operation may take a few seconds. Please wait for a moment.done. 
[r2]interface g0/0/0
[r2-GigabitEthernet0/0/0]ip address 12.1.1.0 24
Error: The specified IP address is invalid.
[r2-GigabitEthernet0/0/0]ip address 12.1.1.1 24
Nov 14 2022 23:06:24-08:00 r2 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[r2-GigabitEthernet0/0/0]int g0/0/1
[r2-GigabitEthernet0/0/1]ip address 172.16.1.1 24
Nov 14 2022 23:07:03-08:00 r2 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP
on the interface GigabitEthernet0/0/1 has entered the UP state.
[r2-GigabitEthernet0/0/1]quit
[r2]ip route    
[r2]ip route-static 23.1.1.0 24 12.1.1.2
[r2]ip route-static 34.1.1.0 24 12.1.1.2
[r2]ip route-static 46.1.1.0 24 12.1.1.2
[r2]ip route-static 192.168.0.0 22 12.1.1.2
[r2]ip route-static 32.1.1.0 22 12.1.1.2
Info: The destination address and mask of the configured static route mismatched
, and the static route 32.1.0.0/22 was generated.
[r2]ip route-static 32.1.1.0 24 12.1.1.2
[r2]ip pool 1
Info: It's successful to create an IP address pool.
[r2-ip-pool-1]net    
[r2-ip-pool-1]network 172.16.1.0 mask 24
[r2-ip-pool-1]gate    
[r2-ip-pool-1]gateway-list 172.16.1.1
[r2-ip-pool-1]dns    
[r2-ip-pool-1]dns-list 8.8.8.8 114.114.114.114
[r2-ip-pool-1]int g0/0/1
[r2-GigabitEthernet0/0/1]dhcp sel    
[r2-GigabitEthernet0/0/1]dhcp select glo    
[r2-GigabitEthernet0/0/1]dhcp select global
[r2-GigabitEthernet0/0/1]quit
[r2]ip pool 1
[r2-ip-pool-1]sta    
[r2-ip-pool-1]static-bind ip    
[r2-ip-pool-1]static-bind ip-address 172.16.1.11 mac    
[r2-ip-pool-1]static-bind ip-address 172.16.1.11 mac-address 5489-980C-5894
[r2-ip-pool-1]static-bind ip-address 172.16.1.13 mac-address 5489-98CD-1BBD
[r2-ip-pool-1]quit
[r2]ip route-sta    
[r2]ip route-static 32.1.1.0 24 12.1.1.2 pre    
[r2]ip route-static 32.1.1.0 24 12.1.1.2 preference 61
Info: Succeeded in modifying route.
[r2]

ar3

The device is running!

<Huawei>
Nov 14 2022 22:59:39-08:00 Huawei %%01IFPDT/4/IF_STATE(l)[0]:Interface GigabitEt
hernet0/0/1 has turned into UP state.
<Huawei>
Nov 14 2022 22:59:39-08:00 Huawei %%01IFPDT/4/IF_STATE(l)[1]:Interface GigabitEt
hernet0/0/2 has turned into UP state.
<Huawei>

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<Huawei>sy    
<Huawei>system-view
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname r3
[r3]user    
[r3]user-int    
[r3]user-interface con    
[r3]user-interface console 0
[r3-ui-console0]idle    
[r3-ui-console0]idle-timeout 0 0
[r3-ui-console0]quit
[r3]dhcp enable
Info: The operation may take a few seconds. Please wait for a moment.done.
[r3]int g0/0/0
[r3-GigabitEthernet0/0/0]ip add    
[r3-GigabitEthernet0/0/0]ip address 12.1.1.2 24
[r3-GigabitEthernet0/0/0]
Nov 14 2022 23:09:25-08:00 r3 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[r3-GigabitEthernet0/0/0]int g0/0/1
[r3-GigabitEthernet0/0/1]ip add    
[r3-GigabitEthernet0/0/1]ip address 23.1.1.1 24
Nov 14 2022 23:09:52-08:00 r3 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP
on the interface GigabitEthernet0/0/1 has entered the UP state.
[r3-GigabitEthernet0/0/1]int g0/0/2
[r3-GigabitEthernet0/0/2]ip add    
[r3-GigabitEthernet0/0/2]ip address 32.1.1.1 24
[r3-GigabitEthernet0/0/2]
Nov 14 2022 23:10:18-08:00 r3 %%01IFNET/4/LINK_STATE(l)[2]:The line protocol IP
on the interface GigabitEthernet0/0/2 has entered the UP state.
[r3-GigabitEthernet0/0/2]quit
[r3]ip route-static 172.16.1.0 24 12.1.1.1
[r3]ip route-static 34.1.1.0 24 32.1.1.2
[r3]ip route-static 46.1.1.0 24 32.1.1.2
[r3]ip route-static 192.168.0.0 22 32.1.1.2
[r3]ip route-static 34.1.1.0. 24 23.1.1.2
                    ^
Error: Wrong parameter found at '^' position.
[r3]ip route-static 34.1.1.0 24 23.1.1.2
[r3]ip route-static 46.1.1.0 24 23.1.1.2
[r3]ip route-static 192.168.0.0 22 23.1.1.2
[r3]

ar4

The device is running!
##
<Huawei>
Nov 14 2022 22:59:52-08:00 Huawei %%01IFPDT/4/IF_STATE(l)[2]:Interface GigabitEt
hernet0/0/2 has turned into UP state.
<Huawei>

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<Huawei>sy
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname r4
[r4]user    
[r4]user-bind
[r4]user-int    
[r4]user-interface con    
[r4]user-interface console 0
[r4-ui-console0]idle    
[r4-ui-console0]idle-timeout 0 0
[r4-ui-console0]quit
[r4]int g0/0/0
[r4-GigabitEthernet0/0/0]ip address 23.1.1.2 24
Nov 14 2022 23:11:43-08:00 r4 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[r4-GigabitEthernet0/0/0]int g0/0/1
[r4-GigabitEthernet0/0/1]ip address 32.1.1.2 24
Nov 14 2022 23:12:06-08:00 r4 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP
on the interface GigabitEthernet0/0/1 has entered the UP state.
[r4-GigabitEthernet0/0/1]int g0/0/1
[r4-GigabitEthernet0/0/1]ip add    
[r4-GigabitEthernet0/0/1]ip address 34.1.1.1 24
[r4-GigabitEthernet0/0/1]iquit
                         ^
Error: Unrecognized command found at '^' position.
[r4-GigabitEthernet0/0/1]quit
[r4]ip route-sta    
[r4]ip route-static 172.16.1.0 24 23.1.1.1
[r4]ip route-static 12.1.1.0 24 23.1.1.1
[r4]ip route-static 46.1.1.0 24 34.1.1.2
[r4]ip route-static 192.168.0.0 22 34.1.1.2
[r4]ip route-static 172.16.1.0 24 32.1.1.1
[r4]ip route-static 12.1.1.0 24 32.1.1.1
[r4]

ar5

The device is running!
######
<Huawei>

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<Huawei>sy
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname r5
[r5]user    
[r5]user-int    
[r5]user-interface con    
[r5]user-interface console 0
[r5-ui-console0]idle    
[r5-ui-console0]idle-timeout 0 0
[r5-ui-console0]quit
[r5]int g0/0/0
[r5-GigabitEthernet0/0/0]ip add    
[r5-GigabitEthernet0/0/0]ip address 46.1.1.2 24
Nov 14 2022 23:16:11-08:00 r5 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[r5-GigabitEthernet0/0/0]int g0/0/1
[r5-GigabitEthernet0/0/1]ip addr    
[r5-GigabitEthernet0/0/1]ip address 192.168.1.1 24
Nov 14 2022 23:16:41-08:00 r5 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP
on the interface GigabitEthernet0/0/1 has entered the UP state.
[r5-GigabitEthernet0/0/1]int g0/0/2
[r5-GigabitEthernet0/0/2]ip add    
[r5-GigabitEthernet0/0/2]ip address 192.168.2.1 24
[r5-GigabitEthernet0/0/2]
Nov 14 2022 23:17:17-08:00 r5 %%01IFNET/4/LINK_STATE(l)[2]:The line protocol IP
on the interface GigabitEthernet0/0/2 has entered the UP state.
[r5-GigabitEthernet0/0/2]quit
[r5]ip rou    
[r5]ip route-sta    
[r5]ip route-static 34.1.1.0 24 46.1.1.1
[r5]ip route-static 23.1.1.0 24 46.1.1.1
[r5]ip route-static 32.1.1.0 24 46.1.1.1
[r5]ip route-static 12.1.1.0 24 46.1.1.1
[r5]ip route-static 172.16.1.0 24 46.1.1.1
[r5]int g0/0/1
[r5-GigabitEthernet0/0/1]dhcp sel    
[r5-GigabitEthernet0/0/1]dhcp select glo    
[r5-GigabitEthernet0/0/1]dhcp select global
Error: Please enable DHCP in the global view first.
[r5-GigabitEthernet0/0/1]ip add    
[r5-GigabitEthernet0/0/1]dhcp enable
Info: The operation may take a few seconds. Please wait for a moment.done.
[r5]int g0/0/1
[r5-GigabitEthernet0/0/1]dhcp sel    
[r5-GigabitEthernet0/0/1]dhcp select  glo    
[r5-GigabitEthernet0/0/1]dhcp select  global
[r5-GigabitEthernet0/0/1]int g0/0/2
[r5-GigabitEthernet0/0/2]dhcp sel    
[r5-GigabitEthernet0/0/2]dhcp select glo    
[r5-GigabitEthernet0/0/2]dhcp select global
[r5-GigabitEthernet0/0/2]quit
[r5]ip pool aaa
Info: It's successful to create an IP address pool.
[r5-ip-pool-aaa]net    
[r5-ip-pool-aaa]netbios-type
[r5-ip-pool-aaa]network 192.168.1.0 mask 24
[r5-ip-pool-aaa]gate    
[r5-ip-pool-aaa]gateway-list 192.168.1.1
[r5-ip-pool-aaa]dns    
[r5-ip-pool-aaa]dns-list 8.8.8.8 114.114.114.114
[r5-ip-pool-aaa]quit
[r5]ip pool bbb
Info: It's successful to create an IP address pool.
[r5-ip-pool-bbb]net    
[r5-ip-pool-bbb]netbios-type
[r5-ip-pool-bbb]network 192.168.2.0 mask 24
[r5-ip-pool-bbb]gate    
[r5-ip-pool-bbb]gateway-list 192.168.2.1
[r5-ip-pool-bbb]dns    
[r5-ip-pool-bbb]dns-list 8.8.8.8 114.114.114.114
[r5-ip-pool-bbb]quit
[r5]ip pool aaa
[r5-ip-pool-aaa]exc    
[r5-ip-pool-aaa]excluded-ip-address 192.168.1.250 192.168.1.254
[r5-ip-pool-aaa]quit
[r5]ip rou    
[r5]ip route-sta    
[r5]ip route-static 32.1.1.0 24 46.1.1.1 pre    
[r5]ip route-static 32.1.1.0 24 46.1.1.1 preference 61
Info: Succeeded in modifying route.
[r5]

ar6

The device is running!
########################################
<Huawei>
Nov 14 2022 22:59:52-08:00 Huawei %%01IFPDT/4/IF_STATE(l)[0]:Interface GigabitEt
hernet0/0/0 has turned into UP state.
<Huawei>
Nov 14 2022 22:59:52-08:00 Huawei %%01IFPDT/4/IF_STATE(l)[1]:Interface GigabitEt
hernet0/0/1 has turned into UP state.
<Huawei>

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<Huawei>sy
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname r6
[r6]user    
[r6]user-int    
[r6]user-interface con    
[r6]user-interface console 0
[r6-ui-console0]idle    
[r6-ui-console0]idle-timeout 0 0
[r6-ui-console0]quit
[r6]int g0/0/0
[r6-GigabitEthernet0/0/0]ip address 34.1.1.2 24
Nov 14 2022 23:14:11-08:00 r6 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[r6-GigabitEthernet0/0/0]int g0/0/1
[r6-GigabitEthernet0/0/1]ip add    
[r6-GigabitEthernet0/0/1]ip address 46.1.1.1 24
Nov 14 2022 23:14:51-08:00 r6 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP
on the interface GigabitEthernet0/0/1 has entered the UP state.
[r6-GigabitEthernet0/0/1]quit
[r6]ip rou    
[r6]ip route-sta    
[r6]ip route-static 192.168.0.0 22 46.1.1.2
[r6]ip route-static 23.1.1.0 24 34.1.1.1
[r6]ip route-static 32.1.1.0 24 34.1.1.1
[r6]ip route-static 12.1.1.0 24 34.1.1.1
[r6]ip route-static 172.1.1.0 24 34.1.1.1
[r6]ip rou    
[r6]ip route-sta    
[r6]ip route-static 32.1.1.0 24 34.1.1.1 pre    
[r6]ip route-static 32.1.1.0 24 34.1.1.1 preference 61
Info: Succeeded in modifying route.
[r6]

pc1

Welcome to use PC Simulator!

PC>ipconfig

Link local IPv6 address...........: fe80::5689:98ff:fe0c:5894
IPv6 address......................: :: / 128
IPv6 gateway......................: ::
IPv4 address......................: 172.16.1.11
Subnet mask.......................: 255.255.255.0
Gateway...........................: 172.16.1.1
Physical address..................: 54-89-98-0C-58-94
DNS server........................: 8.8.8.8
                                    114.114.114.114

pc2

Welcome to use PC Simulator!

PC>ipconfig

Link local IPv6 address...........: fe80::5689:98ff:fecd:1bbd
IPv6 address......................: :: / 128
IPv6 gateway......................: ::
IPv4 address......................: 172.16.1.13
Subnet mask.......................: 255.255.255.0
Gateway...........................: 172.16.1.1
Physical address..................: 54-89-98-CD-1B-BD
DNS server........................: 8.8.8.8
                                    114.114.114.114

pc3

PC>ipconfig

Link local IPv6 address...........: fe80::5689:98ff:fe19:1fcc
IPv6 address......................: :: / 128
IPv6 gateway......................: ::
IPv4 address......................: 192.168.1.249
Subnet mask.......................: 255.255.255.0
Gateway...........................: 192.168.1.1
Physical address..................: 54-89-98-19-1F-CC
DNS server........................: 8.8.8.8
                                    114.114.114.114

pc4

PC>ipconfig

Link local IPv6 address...........: fe80::5689:98ff:fedf:76c2
IPv6 address......................: :: / 128
IPv6 gateway......................: ::
IPv4 address......................: 192.168.1.248
Subnet mask.......................: 255.255.255.0
Gateway...........................: 192.168.1.1
Physical address..................: 54-89-98-DF-76-C2
DNS server........................: 8.8.8.8
                                    114.114.114.114
————————————————
版权声明：本文为CSDN博主「qiuhaitang822」的原创文章，遵循CC 4.0 BY-SA版权协议，转载请附上原文出处链接及本声明。
原文链接：https://blog.csdn.net/qiuhaitang822/article/details/127865354

m0_74812057
关注
  • 0
    点赞
  • 踩
  • 0
    收藏
    觉得还不错? 一键收藏
  • 1
    评论
IntelliJ IDEA安装教程（以IDEA2020.1为例）
蓝多多的小仓库
12-15 45万+
不然会报错嗷（即：第六节所示）！因为我之前有JDK，所以为了更好的演示，我先把JDK17卸载了。
《时序分析、时序约束和时序收敛》专栏的说明与导航
热门推荐
孤独的单刀
02-05 13万+
《时序分析、时序约束和时序收敛》专栏的说明与导航（建议阅读）。
作业第三天
qiuhaitang822的博客
11-15 255
作业第三天
华为交换机配置dhcp详细配置
qq_43636320的博客
05-06 2万+
<Huawei>system-view -- 进去配置模式 [Huawei]dhcp enable 开启dhcp服务 配置防止IP地址重复分配功能 dhcp snooping enable 在全局模式开启dhcp监听功能 （在可以接口配置） [Huawei] dhcp server ping packet 3 ping 3次包 [Huawei] dhcp server ping timeout 100 超时100毫秒 Info: The operation may take ...
OSPF实验
hdlaichi_的博客
03-21 392
The device is running!<Huawei> Please check whether system data has been changed, and save data in time Configuration console time out, please press any key to log on<Huawei> <Huawei> <Huawei>sys Enter system view, return user view with Ctrl+Z. [Huawei]s
GRE网络配置
qq_50665872的博客
01-14 1914
R1的配置： Reply from 15.1.1.2: bytes=56 Sequence=5 ttl=255 time=20 ms --- 15.1.1.2 ping statistics --- 5 packet(s) transmitted 5 packet(s) received 0.00% packet loss round-trip min/avg/max = 20/22/30 ms [R1-Serial4/0/0] Pleas...
路由实验7777777
kaituozhizzz的博客
11-20 7084
写下地址，写地址，下一跳 <Huawei>sys <Huawei>system-view Enter system view, return user view with Ctrl+Z. [Huawei]sy [Huawei]sysname R1 [R1]inter [R1]interface g0/0/0 [R1-GigabitEthernet0/0/0]ip ad [R1-GigabitEthernet0/0/0]ip address 192.168.1.1 30 No...
从System Prompt来看Claude3、Kimi和ChatGLM4之间的差距
最新发布
herosunly的博客
05-29 10万+
本文主要介绍了从System Prompt来看Claude3、Kimi和ChatGLM4之间的差距，希望能对学习大模型的同学们有所帮助。 文章目录 1. 前言 2. System Prompt 2.1 Claude3 2.2 Kimi 2.3 ChatGLM4
linux git clone出现fatal: unable to access Failed to connect to github.com port 443: Timed out解决方案
herosunly的博客
04-09 12万+
本文主要介绍了linux git clone出现fatal: unable to access Failed to connect to github.com port 443: Timed out解决方案，希望对在Linux环境下使用git的同学有所帮助。 文章目录 1. 问题描述 2. 解决方案
2024年Unity 面试题 |五萬字 二佰道| Unity面试题大全，面试题总结【全网最全，收藏一篇足够面试】
努力前行，总会成为自己心中的那道光
02-23 12万+
正所谓 金三银四 ，又到了找工作的大好时机了，不知道大家有没有意向找一份更好的工作呢~ 之前写了很多Unity的学习和实例文章，但是面试题部分还没有一个系统的整理。 那本篇文章就来整理一下Unity中一些常见的面试题，说不准就会面试的时候就会遇到！ 本篇文章会将Unity所有方面的面试资料都融会贯通，绝对是2022年Unity面试领域最实用的文章啦！
[HCIA]OSPF实验
Xiao17dezhuzhu的博客
07-20 498
wei>sys <Huawei>system-view Enter system view, return user view with Ctrl+Z. [Huawei]sys [Huawei]sysname R1 [R1] [R1] [R1]int [R1]interface g0/0/0 [R1-GigabitEthernet0/0/0]ip add [R1-GigabitEthernet0/0/0]ip address 12.1.1.1 24 Jul 20 2021 17...
路由器相关程序图
ENVILPRIME的博客
01-13 241
R1 <Huawei>system-view Enter system view, return user view with Ctrl+Z. [Huawei]sysname R1 [R1]interface g0/0/0 [R1-GigabitEthernet0/0/0]ip address 12.1.1.2 24 Jan 13 2022 17:32:23-08:00 R1 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP on ...
华为eNSP——DHCP中继实验
ZG_66的博客
06-30 2568
实验步骤 SW1 <Huawei>u t m Info: Current terminal monitor is off. <Huawei>system-view Enter system view, return user view with Ctrl+Z. [Huawei]sysname SW1 [SW1]v b 10 20 Info: This operation may take a few seconds. Please wait for a moment...do.
静态路由综合实验
qq_50665872的博客
01-11 1604
R1的配置： Please press enter to start cmd line! <Huawei>sys <Huawei>system-view Enter system view, return user view with Ctrl+Z. [Huawei]sysname R1 [R1]interface LoopBack 0 [R1-LoopBack0]ip address 192.168.1.33 28 [R1-LoopBack0]int lo 1...
1.04网络小实验
志当存高远
01-05 503
1 R1 u t m Info: Current terminal monitor is off. sy Enter system view, return user view with Ctrl+Z. [Huawei]user-interface console 0 [Huawei-ui-console0]idle-timeout 0 0 [Huawei-ui-console0]q [Huawei]int g0/0/0 [Huawei-GigabitEthernet0/0/0]ip add 10.0.0
HCIP---第八天
灵兮诺雪的博客
04-21 460
OSPF的拓展配置 1，手工认证 2，缺省路由 3类缺省 --- 这类缺省只能在特殊区域中自动产生。 普通末梢，完全末梢，完全NSSA 特定 --- 通过3类LSA传递的缺省信息，标记位OSPF，默认优先级为10。 5类缺省 --- 可以通过命令手动下发：default-route-advertise 特点 --- 通过5类LSA传递缺省信息，default-route-advertise下发的前提条件是要求边界设备上的路由表本身存在通过其他方式获取到的缺省信息，之后，通过这个命...
主机太多怎么分IP？ DHCP帮助您，不管Linux还是Windows，全都一键搞定
qq_45773660的博客
04-27 703
实验-DHCP配置一、CentOS 7中动态分配主机IP1.1 概述1.2 配置DHCP服务器1.2.1 安装相应工具1.2.3 查看配置文件1.3 搭建华为模拟器1.3.1 搭建cloud1.3.2 ensp内各项参数设置1.4 虚拟机内网卡配置1.5 DHCP配置文件1.6 测试二、给单机分配固定IP2.1 给win10系统设置2.1.1 获取Mac信息2.2.2 编辑文本三、给Linux客户端用DHCP动态获取IP3.1 方法一2.2 方法二 一、CentOS 7中动态分配主机IP 1.1 概述
全网通练习题
weixin_53496981的博客
01-04 261
SW3 <Huawei>undo terminal monitor Info: Current terminal monitor is off. <Huawei>system-view Enter system view, return user view with Ctrl+Z. [Huawei]sysname sW3 [sW3]user-interface console 0 [sW3-ui-console0]idle-timeout 0 0 [sW3-ui-consol..
解析！！DHCP协议 DHCP实验详细过程！！！
weixin_49022211的博客
06-29 4789
目录 一 ： DHCP协议 1.1 DHCP简述 1.2 DHCP的作用 1.2.1 DHCP的好处 1.2.2 DHCP的三种机制分配ip 1.2.3 windows中获得释放地址命令 二：DHCP协议中的报文 三：实验————DHCP中继实验过程 一：DHCP协议 1.1 DHCP简述 DHCP(Dynamic Host Configuration Protocol），动态主机配置协议)是一种局域网的协议。主要是集中的管理，分配IP地址，使网络环境中的主机动态的获得IP地址。基于udp协议，端口号67&
default-route-advertise（OSPF）
WFlySky的博客
10-23 3万+
命令功能 default-route-advertise命令用来将缺省路由通告到普通OSPF区域。 undo default-route-advertise命令用来取消通告缺省路由到普通OSPF区域。 缺省情况下，在普通OSPF区域内的OSPF设备不产生缺省路由。 命令格式 default-route-advertise [ [ always | permit-calculate-other ] | cost cost | type type | route-policy route-policy-name
评论 1
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值