关于 Qt在线安装报错下载“http://mirrors.aliyun.com...“时出现网络错误无法在线安装Qt 的解决方法

在Linux环境下安装Qt时遇到网络问题,可能是由于阿里云源的暂时性问题导致。解决方法是在命令行中指定使用Tsinghua大学的镜像源,如`./qt-unified-linux-x64-4.3.0-online.run--mirrorhttps://mirrors.tuna.tsinghua.edu.cn/qt`,这将加快安装速度。

摘要生成于 C知道 ,由 DeepSeek-R1 满血版支持, 前往体验 >

若该文为原创文章,转载请注明原文出处
本文章博客地址:https://hpzwl.blog.csdn.net/article/details/129535278

红胖子(红模仿)的博文大全:开发技术集合(包含Qt实用技术、树莓派、三维、OpenCV、OpenGL、ffmpeg、OSG、单片机、软硬结合等等)持续更新中…(点击传送门)

Qt开发专栏:各种问题解决(点击传送门)


问题

  linux界面下安装qt的时候,出现网络错误。
在这里插入图片描述


源的问题

  暂时性阿里云源的问题。


解决(windows下)

  《关于 Qt在线安装速度较慢 的解决方法


解决(linux下)

  找到在线安装应用目录:
  在这里插入图片描述
  右键打开控制台/命令行,然后指定源:

./qt-unified-linux-x64-4.3.0-online.run --mirror https://mirrors.tuna.tsinghua.edu.cn/qt

  在这里插入图片描述

  在这里插入图片描述
  很快:
  在这里插入图片描述
  在这里插入图片描述


若该文为原创文章,转载请注明原文出处
本文章博客地址:https://hpzwl.blog.csdn.net/article/details/129535278

/boot/grub2/i386-pc/boot.img 文件是一个针对x86架构的引导镜像文件,它包含了用于引导启动计算机的程序和参数等信息。 以下是/boot/grub2/i386-pc/boot.img文件的码注释: ``` /* * This file contains the source code for the x86 version of the GRUB * boot loader. It is responsible for loading the operating system kernel * from the hard disk and transferring control to it. */ #include <grub/types.h> #include <grub/i386/pc/boot.h> #include <grub/i386/pc/loadfile.h> /* * The main function of the boot loader. It is called by the BIOS when the * computer is powered on or reset. It initializes the hardware, loads the * kernel from the hard disk, and transfers control to it. */ int main (void) { /* Initialize the hardware */ init_hw (); /* Load the kernel from the hard disk */ if (load_kernel () != 0) { /* Error loading the kernel */ return 1; } /* Transfer control to the kernel */ transfer_control (); /* Should never get here */ return 0; } /* * Initializes the hardware, including the console output and disk system. */ void init_hw (void) { /* Initialize the console */ init_console (); /* Initialize the disk system */ init_disk (); } /* * Loads the kernel from the hard disk into memory. */ int load_kernel (void) { /* Read the kernel from the hard disk */ if (read_kernel () != 0) { /* Error reading the kernel */ return 1; } /* Initialize the kernel */ init_kernel (); return 0; } /* * Transfers control to the kernel by jumping to its entry point. */ void transfer_control (void) { /* Jump to the kernel entry point */ jump_to_kernel (); } ``` 以上是x86架构/boot/grub2/i386-pc/boot.img文件的码和注释。其中,主要包括了引导加载程序的主函数、硬件初始化函数、内核加载函数和转移控制函数等。通过这些函数的调用,boot.img文件可以成功地将计算机引导到操作系统内核。
评论 7
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包

打赏作者

长沙红胖子Qt(技术Q群4597637)

你的鼓励将是我创作的最大动力

¥1 ¥2 ¥4 ¥6 ¥10 ¥20
扫码支付:¥1
获取中
扫码支付

您的余额不足,请更换扫码支付或充值

打赏作者

实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值