orb-slam系列 Tracking线程 (二)

最新推荐文章于 2022-08-09 11:37:04 发布

角落小王

最新推荐文章于 2022-08-09 11:37:04 发布

阅读量309

点赞数 1

分类专栏： slam 文章标签： slam orb

本文链接：https://blog.csdn.net/qq_18834185/article/details/103066710

版权

slam 专栏收录该内容

14 篇文章 3 订阅

订阅专栏

1 Tracking线程初始化

1）加载相机相关参数

 *     函数属性：类Tracking的构造函数
 *     函数功能：（1）加载相机相关参数（内参数矩阵K以及相机畸变矩阵DistCoef）
 *                        （2）重定位最大失帧数
 *                        （3）初始化ORB特征提取器
 *     函数参数介绍：
 *                          pSys：指定本系统
 *                          pVoc：指定所用的词典
 *                          pFrameDrawer：每一帧的观测器
 *                          pKFDB：关键帧数据集
 *                          pMapDrawer：地图的观测器
 *                          pMap：指代整个地图
 *                          strSettingPath：配置文件的路径（相机相关参数以及工程中所用到的参数）
 *                          sensor：传感器类型
 *     备注：NULL
 * 
 ******************************************************************************/
Tracking::Tracking(System *pSys, ORBVocabulary* pVoc, FrameDrawer *pFrameDrawer, MapDrawer *pMapDrawer, Map *pMap,
		   KeyFrameDatabase* pKFDB, const string &strSettingPath, const int sensor):
    mState(NO_IMAGES_YET), mSensor(sensor), mbOnlyTracking(false), mbVO(false), mpORBVocabulary(pVoc),
    mpKeyFrameDB(pKFDB), mpInitializer(static_cast<Initializer*>(NULL)), mpSystem(pSys), mpViewer(NULL),
    mpFrameDrawer(pFrameDrawer), mpMapDrawer(pMapDrawer), mpMap(pMap), mnLastRelocFrameId(0)
{
    // Load camera parameters from settings file
    //加载相机相关参数
    cv::FileStorage fSettings(strSettingPath, cv::FileStorage::READ);
    float fx = fSettings["Camera.fx"];
    float fy = fSettings["Camera.fy"];
    float cx = fSettings["Camera.cx"];
    float cy = fSettings["Camera.cy"];
    
    //相机内参数矩阵
    cv::Mat K = cv::Mat::eye(3,3,CV_32F);
    K.at<float>(0,0) = fx;
    K.at<float>(1,1) = fy;
    K.at<float>(0,2) = cx;
    K.at<float>(1,2) = cy;
    K.copyTo(mK);
    
    //相机畸变矩阵    k1,k2,k3径向畸变    p1,p2切向畸变
    cv::Mat DistCoef(4,1,CV_32F);
    DistCoef.at<float>(0) = fSettings["Camera.k1"];
    DistCoef.at<float>(1) = fSettings["Camera.k2"];
    DistCoef.at<float>(2) = fSettings["Camera.p1"];
    DistCoef.at<float>(3) = fSettings["Camera.p2"];
    const float k3 = fSettings["Camera.k3"];
    if(k3!=0)
    {
        DistCoef.resize(5);
        DistCoef.at<float>(4) = k3;
    }
    DistCoef.copyTo(mDistCoef);
    
    //双目摄像头baseline*fx  50
    mbf = fSettings["Camera.bf"];
    
    //帧率，每秒钟所走过的帧数
    float fps = fSettings["Camera.fps"];
    if(fps==0)
        fps=30;
    
    // Max/Min Frames to insert keyframes and to check relocalisation
    //插入关键帧和检测重定位的最小，最大帧，也就是说当连续有30帧没匹配到的时候进行重定位
    mMinFrames = 0;
    mMaxFrames = fps;
    
    //打印一下刚刚配置的参数
    cout << endl << "Camera Parameters: " << endl;
    cout << "- fx: " << fx << endl;
    cout << "- fy: " << fy << endl;
    cout << "- cx: " << cx << endl;
    cout << "- cy: " << cy << endl;
    cout << "- k1: " << DistCoef.at<float>(0) << endl;
    cout << "- k2: " << DistCoef.at<float>(1) << endl;
    if(DistCoef.rows==5)
        cout << "- k3: " << DistCoef.at<float>(4) << endl;
    cout << "- p1: " << DistCoef.at<float>(2) << endl;
    cout << "- p2: " << DistCoef.at<float>(3) << endl;
    cout << "- fps: " << fps << endl;

    //配置图片是按照什么颜色顺序存储的RGB: 1 ;BGR: 0
    int nRGB = fSettings["Camera.RGB"];
    mbRGB = nRGB;

    if(mbRGB)
        cout << "- color order: RGB (ignored if grayscale)" << endl;
    else
        cout << "- color order: BGR (ignored if grayscale)" << endl;

    // Load ORB parameters
    //加载ORB的相关参数
    //ORB特征点的数量
    int nFeatures = fSettings["ORBextractor.nFeatures"];
    //图像金字塔中相邻层的放大倍数
    float fScaleFactor = fSettings["ORBextractor.scaleFactor"];
    //图像金字塔有多少层
    int nLevels = fSettings["ORBextractor.nLevels"];
    // Image is divided in a grid. At each cell FAST are extracted imposing a minimum response.
    // Firstly we impose iniThFAST. If no corners are detected we impose a lower value minThFAST
    // You can lower these values if your images have low contrast	
    int fIniThFAST = fSettings["ORBextractor.iniThFAST"];                 //提取fast特征点的默认阈值 20
    int fMinThFAST = fSettings["ORBextractor.minThFAST"];            //如果默认阈值提取不出足够fast特征点，则使用最小阈值 8

    // tracking过程都会用到mpORBextractorLeft作为特征点提取器
    mpORBextractorLeft = new ORBextractor(nFeatures,fScaleFactor,nLevels,fIniThFAST,fMinThFAST);

    // 如果是双目，tracking过程中还会用用到mpORBextractorRight作为右目特征点提取器
    if(sensor==System::STEREO)
        mpORBextractorRight = new ORBextractor(nFeatures,fScaleFactor,nLevels,fIniThFAST,fMinThFAST);

    // 在单目初始化的时候，会用mpIniORBextractor来作为特征点提取器
    if(sensor==System::MONOCULAR)
        mpIniORBextractor = new ORBextractor(2*nFeatures,fScaleFactor,nLevels,fIniThFAST,fMinThFAST);

    cout << endl  << "ORB Extractor Parameters: " << endl;
    cout << "- Number of Features: " << nFeatures << endl;
    cout << "- Scale Levels: " << nLevels << endl;
    cout << "- Scale Factor: " << fScaleFactor << endl;
    cout << "- Initial Fast Threshold: " << fIniThFAST << endl;
    cout << "- Minimum Fast Threshold: " << fMinThFAST << endl;

    if(sensor==System::STEREO || sensor==System::RGBD)
    {
      // 判断一个3D点远/近的阈值 mbf * 35 / fx   baseline*fx*35/fx = baseline*35
        mThDepth = mbf*(float)fSettings["ThDepth"]/fx;
        cout << endl << "Depth Threshold (Close/Far Points): " << mThDepth << endl;
    }

    if(sensor==System::RGBD)
    {
      // 深度相机disparity转化为depth时的因子
        mDepthMapFactor = fSettings["DepthMapFactor"];
        if(fabs(mDepthMapFactor)<1e-5)
            mDepthMapFactor=1;
        else
            mDepthMapFactor = 1.0f/mDepthMapFactor;
    }

}

2）ORBextractor提取过程

    // 如果是双目，tracking过程中还会用用到mpORBextractorRight作为右目特征点提取器
    if(sensor==System::STEREO)
        mpORBextractorRight = new ORBextractor(nFeatures,fScaleFactor,nLevels,fIniThFAST,fMinThFAST);

ORBextractor::ORBextractor(int _nfeatures, float _scaleFactor, int _nlevels,
         int _iniThFAST, int _minThFAST):
    nfeatures(_nfeatures), scaleFactor(_scaleFactor), nlevels(_nlevels),
    iniThFAST(_iniThFAST), minThFAST(_minThFAST)
{
    //计算每一层相对于原始图片的放大倍数
    mvScaleFactor.resize(nlevels);
    mvLevelSigma2.resize(nlevels);
    mvScaleFactor[0]=1.0f;
    mvLevelSigma2[0]=1.0f;
    for(int i=1; i<nlevels; i++)
    {
        mvScaleFactor[i]=mvScaleFactor[i-1]*scaleFactor;
        mvLevelSigma2[i]=mvScaleFactor[i]*mvScaleFactor[i];
    }
    //计算每一层想对于原始图片放大倍数的逆
    mvInvScaleFactor.resize(nlevels);
    mvInvLevelSigma2.resize(nlevels);
    for(int i=0; i<nlevels; i++)
    {
        mvInvScaleFactor[i]=1.0f/mvScaleFactor[i];
        mvInvLevelSigma2[i]=1.0f/mvLevelSigma2[i];
    }

    mvImagePyramid.resize(nlevels);

    mnFeaturesPerLevel.resize(nlevels);
    float factor = 1.0f / scaleFactor;      //scaleFactor：1.2   nfeatures：1000   nlevels：8
    
    //为什么第一层的特征点数量为这些，这是由于
    //  第一层：nfeatures*(1 - factor)/(1 - (float)pow((double)factor, (double)nlevels))
    //  第二层：nfeatures*(1 - factor)/(1 - (float)pow((double)factor, (double)nlevels))*q
    //  第三层：nfeatures*(1 - factor)/(1 - (float)pow((double)factor, (double)nlevels))*q*q
    //   .........
    //  第nlevels层：nfeatures*(1 - factor)/(1 - (float)pow((double)factor, (double)nlevels))*q^nlevels
    //  其中q=factor
    //  那么前nlevels层的和为总的特征点数量nfeatures（等比数列的前n相和）
    //  可以看出ORB特征点是如何实现尺度不变性的，原始图像那一层特征点最多，依次递减
    //   主要是将每层的特征点数量进行均匀控制
    float nDesiredFeaturesPerScale = nfeatures*(1 - factor)/(1 - (float)pow((double)factor, (double)nlevels));  //计算第一层特征点的数量

    int sumFeatures = 0;
    for( int level = 0; level < nlevels-1; level++ )
    {
        mnFeaturesPerLevel[level] = cvRound(nDesiredFeaturesPerScale); //mnFeaturesPerLevel数组存储每层特征点的数量
        sumFeatures += mnFeaturesPerLevel[level];
        nDesiredFeaturesPerScale *= factor;
    }
    mnFeaturesPerLevel[nlevels-1] = std::max(nfeatures - sumFeatures, 0);
    //复制训练的模板
    const int npoints = 512;
    const Point* pattern0 = (const Point*)bit_pattern_31_;
    std::copy(pattern0, pattern0 + npoints, std::back_inserter(pattern));

    //This is for orientation   用于计算特征点方向
    // pre-compute the end of a row in a circular patch
    //用于计算特征方向时，每个v坐标对应最大的u坐标
    umax.resize(HALF_PATCH_SIZE + 1);
    
    // 将v坐标划分为两部分进行计算，主要为了确保计算特征主方向的时候，x,y方向对称
    int v, v0, vmax = cvFloor(HALF_PATCH_SIZE * sqrt(2.f) / 2 + 1); //cvFloor含义是取不大于参数的最大整数值
    int vmin = cvCeil(HALF_PATCH_SIZE * sqrt(2.f) / 2);    //cvCeil含义是取不小于参数的最小整数值
    //利用勾股定理计算
    const double hp2 = HALF_PATCH_SIZE*HALF_PATCH_SIZE;
    //V坐标的第一部分
    for (v = 0; v <= vmax; ++v)
        umax[v] = cvRound(sqrt(hp2 - v * v));

    // Make sure we are symmetric  确保对称，即保证是一个圆
    //V坐标的第二部分
    for (v = HALF_PATCH_SIZE, v0 = 0; v >= vmin; --v)
    {
        while (umax[v0] == umax[v0 + 1])
            ++v0;
        umax[v] = v0;
        ++v0;
    }
}

其中

//计算每一层相对于原始图片的放大倍数
    mvScaleFactor.resize(nlevels);
    mvLevelSigma2.resize(nlevels);
    mvScaleFactor[0]=1.0f;
    mvLevelSigma2[0]=1.0f;
    for(int i=1; i<nlevels; i++)
    {
        mvScaleFactor[i]=mvScaleFactor[i-1]*scaleFactor;
        mvLevelSigma2[i]=mvScaleFactor[i]*mvScaleFactor[i];
    }
    //计算每一层想对于原始图片放大倍数的逆
    mvInvScaleFactor.resize(nlevels);
    mvInvLevelSigma2.resize(nlevels);
    for(int i=0; i<nlevels; i++)
    {
        mvInvScaleFactor[i]=1.0f/mvScaleFactor[i];
        mvInvLevelSigma2[i]=1.0f/mvLevelSigma2[i];
    }

mvScaleFactor 是相对于原始图像的缩放比例
mvLevelSigma2 缩放面积的比例

//scaleFactor：1.2   nfeatures：1000   nlevels：8
    
    //为什么第一层的特征点数量为这些，这是由于
    //  第一层：nfeatures*(1 - factor)/(1 - (float)pow((double)factor, (double)nlevels))
    //  第二层：nfeatures*(1 - factor)/(1 - (float)pow((double)factor, (double)nlevels))*q
    //  第三层：nfeatures*(1 - factor)/(1 - (float)pow((double)factor, (double)nlevels))*q*q
    //   .........
    //  第nlevels层：nfeatures*(1 - factor)/(1 - (float)pow((double)factor, (double)nlevels))*q^nlevels
    //  其中q=factor
    //  那么前nlevels层的和为总的特征点数量nfeatures（等比数列的前n相和）
    //  可以看出ORB特征点是如何实现尺度不变性的，原始图像那一层特征点最多，依次递减
    //   主要是将每层的特征点数量进行均匀控制
    float nDesiredFeaturesPerScale = nfeatures*(1 - factor)/(1 - (float)pow((double)factor, (double)nlevels));  //计算第一层特征点的数量

每幅图像特征点总共1000个分为8层
用等比数列计算出第一层特征点个数[0]

    for( int level = 0; level < nlevels-1; level++ )
    {
        mnFeaturesPerLevel[level] = cvRound(nDesiredFeaturesPerScale); //mnFeaturesPerLevel数组存储每层特征点的数量
        sumFeatures += mnFeaturesPerLevel[level];
        nDesiredFeaturesPerScale *= factor;
    }
    mnFeaturesPerLevel[nlevels-1] = std::max(nfeatures - sumFeatures, 0);

后七层分别等比例计算最后一层重新算一下 1000-前7层

后面进行二分法比较计算出描述子

2 SLAM.TrackStereo(imLeftRect,imRightRect,tframe);

cv::Mat System::TrackStereo(const cv::Mat &imLeft, const cv::Mat &imRight, const double &timestamp)
{
    if(mSensor!=STEREO)
    {
        cerr << "ERROR: you called TrackStereo but input sensor was not set to STEREO." << endl;
        exit(-1);
    }   

    // Check mode change
    {
        //对mode加锁
        unique_lock<mutex> lock(mMutexMode);
        if(mbActivateLocalizationMode)
        {
            mpLocalMapper->RequestStop();

            // Wait until Local Mapping has effectively stopped
            while(!mpLocalMapper->isStopped())
            {
                usleep(1000);
            }

            mpTracker->InformOnlyTracking(true);
            mbActivateLocalizationMode = false;
        }
        if(mbDeactivateLocalizationMode)
        {
            mpTracker->InformOnlyTracking(false);
            mpLocalMapper->Release();
            mbDeactivateLocalizationMode = false;
        }
    }

    // Check reset
    {
    unique_lock<mutex> lock(mMutexReset);
    if(mbReset)
    {
        mpTracker->Reset();
        mbReset = false;
    }
    }

    cv::Mat Tcw = mpTracker->GrabImageStereo(imLeft,imRight,timestamp);

    unique_lock<mutex> lock2(mMutexState);
    mTrackingState = mpTracker->mState;
    mTrackedMapPoints = mpTracker->mCurrentFrame.mvpMapPoints;
    mTrackedKeyPointsUn = mpTracker->mCurrentFrame.mvKeysUn;
    return Tcw;
}

其中

    cv::Mat Tcw = mpTracker->GrabImageStereo(imLeft,imRight,timestamp);

初始位姿

cv::Mat Tracking::GrabImageStereo(const cv::Mat &imRectLeft, const cv::Mat &imRectRight, const double &timestamp)
{
    mImGray = imRectLeft;
    cv::Mat imGrayRight = imRectRight;

    if(mImGray.channels()==3)
    {
        if(mbRGB)
        {
            cvtColor(mImGray,mImGray,CV_RGB2GRAY);
            cvtColor(imGrayRight,imGrayRight,CV_RGB2GRAY);
        }
        else
        {
            cvtColor(mImGray,mImGray,CV_BGR2GRAY);
            cvtColor(imGrayRight,imGrayRight,CV_BGR2GRAY);
        }
    }
    else if(mImGray.channels()==4)
    {
        if(mbRGB)
        {
            cvtColor(mImGray,mImGray,CV_RGBA2GRAY);
            cvtColor(imGrayRight,imGrayRight,CV_RGBA2GRAY);
        }
        else
        {
            cvtColor(mImGray,mImGray,CV_BGRA2GRAY);
            cvtColor(imGrayRight,imGrayRight,CV_BGRA2GRAY);
        }
    }

    mCurrentFrame = Frame(mImGray,imGrayRight,timestamp,mpORBextractorLeft,mpORBextractorRight,mpORBVocabulary,mK,mDistCoef,mbf,mThDepth);

    Track();

    return mCurrentFrame.mTcw.clone();
}

这里面的

 mCurrentFrame = Frame(mImGray,imGrayRight,timestamp,mpORBextractorLeft,mpORBextractorRight,mpORBVocabulary,mK,mDistCoef,mbf,mThDepth);

构建出了当前帧的对象


```cpp
Frame::Frame(const cv::Mat &imLeft, const cv::Mat &imRight, const double &timeStamp, ORBextractor* extractorLeft, ORBextractor* extractorRight, ORBVocabulary* voc, cv::Mat &K, cv::Mat &distCoef, const float &bf, const float &thDepth)
    :mpORBvocabulary(voc),mpORBextractorLeft(extractorLeft),mpORBextractorRight(extractorRight), mTimeStamp(timeStamp), mK(K.clone()),mDistCoef(distCoef.clone()), mbf(bf), mThDepth(thDepth),
     mpReferenceKF(static_cast<KeyFrame*>(NULL))
{
    // Frame ID
    mnId=nNextId++;

    // Scale Level Info
    mnScaleLevels = mpORBextractorLeft->GetLevels();
    mfScaleFactor = mpORBextractorLeft->GetScaleFactor();
    mfLogScaleFactor = log(mfScaleFactor);
    mvScaleFactors = mpORBextractorLeft->GetScaleFactors();
    mvInvScaleFactors = mpORBextractorLeft->GetInverseScaleFactors();
    mvLevelSigma2 = mpORBextractorLeft->GetScaleSigmaSquares();
    mvInvLevelSigma2 = mpORBextractorLeft->GetInverseScaleSigmaSquares();

    // ORB extraction
    thread threadLeft(&Frame::ExtractORB,this,0,imLeft);
    thread threadRight(&Frame::ExtractORB,this,1,imRight);
    threadLeft.join();
    threadRight.join();

    N = mvKeys.size();

    if(mvKeys.empty())
        return;

    UndistortKeyPoints();

    ComputeStereoMatches();

    mvpMapPoints = vector<MapPoint*>(N,static_cast<MapPoint*>(NULL));    
    mvbOutlier = vector<bool>(N,false);


    // This is done only for the first Frame (or after a change in the calibration)
    if(mbInitialComputations)
    {
        ComputeImageBounds(imLeft);

        mfGridElementWidthInv=static_cast<float>(FRAME_GRID_COLS)/(mnMaxX-mnMinX);
        mfGridElementHeightInv=static_cast<float>(FRAME_GRID_ROWS)/(mnMaxY-mnMinY);

        fx = K.at<float>(0,0);
        fy = K.at<float>(1,1);
        cx = K.at<float>(0,2);
        cy = K.at<float>(1,2);
        invfx = 1.0f/fx;
        invfy = 1.0f/fy;

        mbInitialComputations=false;
    }

    mb = mbf/fx;

    AssignFeaturesToGrid();
}

特征点提取的入口

    // ORB extraction
    thread threadLeft(&Frame::ExtractORB,this,0,imLeft);
    thread threadRight(&Frame::ExtractORB,this,1,imRight);

Track() 函数

后续在写

角落小王

关注

1
点赞
踩
0

收藏

觉得还不错? 一键收藏
0
评论
orb-slam系列 Tracking线程 (二)

1 Tracking线程初始化1）加载相机相关参数 * 函数属性：类Tracking的构造函数 * 函数功能：（1）加载相机相关参数（内参数矩阵K以及相机畸变矩阵DistCoef） * （2）重定位最大失帧数 * （3）初始化ORB特征提取器 * 函数参数介绍： * ...
复制链接

扫一扫