ADALM2000上手-win10

大公司的产品，兼容WIN10、linux、苹果三种系统。这里用的是WIN10。

0. 参考资料
ADALM2000 学生及普通用户指南, https://wiki.seeedstudio.com/cn/ADALM2000-for-End-Users/
ADALM2000, https://www.analog.com/cn/design-center/evaluation-hardware-and-software/evaluation-boards-kits/ADALM2000.html#eb-overview
ADALM2000 Overview, https://wiki.analog.com/university/tools/m2k
https://www.darwinlearns.com/m2k

1. WIN10-安装驱动
1.1 下载驱动文件
好慢。屋里的网络，早上下载会比较快
https://github.com/analogdevicesinc/plutosdr-m2k-drivers-win/releases
网络实在差，不行就只能 淘宝搜索github下载了

1.2 串口登录
Tera Term
波特率115200
root/analog

Welcome to:

 __   __  ____
|  \ /  |(___ \
|   v   |  __) ) _  __
| |\_/| | / __/ | |/ /
| |   | || |___ |   <
|_|   |_||_____)|_|\_\
01001101 00110010 01101011

v0.25
http://wiki.analog.com/university/tools/m2k
#
#

1.3 U盘
多了个M2k的U盘，用浏览器打开里面的info.html

2. USB更新固件-win10（未成功，我的LED1没有快闪）
2.1  下载最新固件
https://github.com/analogdevicesinc/m2k-fw/releases/latest

2.2 复制m2k.frm到U盘根目录下，然后弹开，但不能拔出USB线
Copy the m2k.frm file onto the mass storage device, and then eject it. LED1 will start blinking rapidly.
Windows/OSX
Open the M2K mass storage device
Download and open the firmware file
Copy the file to the Mass Storage device
Eject (don't unplug) the M2K mass storage device
This will cause LED1 to blink rapidly. This means programming is taking place. Do not remove power (or USB) while the device is blinking rapidly. It does take approximately 4 minutes to properly program the device.
Still do not unplug things. Try to be more patient.
Once the device is done programming, it will re-appear as a mass storage device.
Now you can unplug it, and use it as normal.

3. DFU update - win10
3.1 串口调试或者ssh控制M2K进入升级模式
控制命令：device_reboot sf

Welcome to M2k
m2k login: root
Password:
Welcome to:

 __   __  ____
|  \ /  |(___ \
|   v   |  __) ) _  __
| |\_/| | / __/ | |/ /
| |   | || |___ |   <
|_|   |_||_____)|_|\_\
01001101 00110010 01101011

v0.25
http://wiki.analog.com/university/tools/m2k
# device_reboot sf
#

3.2 下载UPDATE.BAT脚本
自行打开https://github.com/analogdevicesinc/plutosdr_scripts/blob/master/UPDATE.BAT
把内容复制到本地的UPDATE.BAT3.3 执行脚本升级固件
win+r:cmd进入控制台

E:\ADALM2000>UPDATE.BAT E:\ADALM2000\m2k-fw-v0.26\m2k.dfu
dfu-util 0.9

Copyright 2005-2009 Weston Schmidt, Harald Welte and OpenMoko Inc.
Copyright 2010-2016 Tormod Volden and Stefan Schmidt
This program is Free Software and has ABSOLUTELY NO WARRANTY
Please report bugs to http://sourceforge.net/p/dfu-util/tickets/

Opening DFU capable USB device...
ID 0456:b675
Run-time device DFU version 0110
Claiming USB DFU Interface...
Setting Alternate Setting #1 ...
Determining device status: state = dfuIDLE, status = 0
dfuIDLE, continuing
DFU mode device DFU version 0110
Device returned transfer size 4096
Copying data from PC to DFU device
Download        [=========================] 100%     10068463 bytes
Download done.
state(7) = dfuMANIFEST, status(0) = No error condition is present
state(2) = dfuIDLE, status(0) = No error condition is present
Done!

E:\ADALM2000>

3.4 M2K重新上电 
用串口调试发现固件版本是0.26了

Welcome to M2k
m2k login: root
Password:
Login incorrect
m2k login: root
Password:
Welcome to:

 __   __  ____
|  \ /  |(___ \
|   v   |  __) ) _  __
| |\_/| | / __/ | |/ /
| |   | || |___ |   <
|_|   |_||_____)|_|\_\
01001101 00110010 01101011

v0.26
https://wiki.analog.com/university/tools/m2k
#

4. scopy
4.1 下载scopy安装包
https://github.com/analogdevicesinc/scopy/releases/latest
 选择scopy-v1.2.0-Windows-setup.exe
因为我这边网速不好，也耗费不少时间 

4.2 安装scopy
选择D盘，安装完后需要重启

4.3 打开scopy测试

scopy源码：https://github.com/analogdevicesinc/scopy
Building Scopy on Windows, https://wiki.analog.com/university/tools/m2k/scopy/build-windows
Scopy - Scripting Guide, https://wiki.analog.com/university/tools/m2k/scopy/scripting-guide

5. alice
Active Learning Interface (for) Circuits (and) Electronics for M2K: https://wiki.analog.com/university/tools/m2k/alice/users-guide-m2k
https://github.com/analogdevicesinc/alice

 

6. 相关文件

网络不好下载太慢了，期间我都想叫别人代下了。。这是文件资料

链接: https://pan.baidu.com/s/1JUzgBOBg-vXpMTvNo-JfSw 提取码: ifiw 复制这段内容后打开百度网盘手机App，操作更方便哦