配置2080TI花费了不少时间,主要就是各种版本不适配,只要版本选的对,再加上一个好的教程分分钟可以配好。
配置环境:
- ubuntu16.04
- GeFore RTX 2080 Ti
- nvidia驱动:NVIDIA-linux-x86_64-418.56.run
- cuda版本: cuda_10.1.105_418.39_linux.sh
- cudnn版本:cudnn-10.1-linux-x64-v7.5.1.10.solitairetheme8
- opencv-3.4.6
- Anaconda3-4.2.0-Linux-x86_64.sh(此版本python3.5,能够比较好适配caffe)
- caffe
- Matlab2015b(试过matlab2015以上版本,编译matcaffe总是报错)
下面贴出我caffe的Makefile.config配置文件
## Refer to http://caffe.berkeleyvision.org/installation.html
# Contributions simplifying and improving our build system are welcome!
# cuDNN acceleration switch (uncomment to build with cuDNN).
USE_CUDNN := 1
# CPU-only switch (uncomment to build without GPU support).
# CPU_ONLY := 1
# uncomment to disable IO dependencies and corresponding data layers
USE_OPENCV := 1
# USE_LEVELDB := 0
# USE