13、WWDG窗口看门狗实验

1、WWDG简介 

 2、WWDG工作原理及框图

 

3、 WWDG计算超时时间

4、WWDG配置步骤

5、 实验目的

开启窗口看门狗，计数器值设置为 0X7F ，窗口值设置为 0X5F ，预分频系数为 8 。在 while 循环里喂狗，同时翻转 LED1 状态；在提前唤醒中断服务函数进行喂狗，同时翻转 LED2 状态。

6、实验代码

 wwdg.c

#include "wwdg.h"
#include "led.h"

WWDG_HandleTypeDef wwdg_handle = {0};
void wwdg_init(uint8_t tr, uint8_t wr, uint32_t psc)
{
    wwdg_handle.Instance = WWDG;
    wwdg_handle.Init.Counter = tr;
    wwdg_handle.Init.Window = wr;
    wwdg_handle.Init.Prescaler = psc;
    wwdg_handle.Init.EWIMode = WWDG_EWI_ENABLE;
    HAL_WWDG_Init(&wwdg_handle);
}

void HAL_WWDG_MspInit(WWDG_HandleTypeDef *hwwdg)
{
    __HAL_RCC_WWDG_CLK_ENABLE();
    
    HAL_NVIC_SetPriority(WWDG_IRQn, 2, 2);
    HAL_NVIC_EnableIRQ(WWDG_IRQn);
}

void WWDG_IRQHandler(void)
{
    HAL_WWDG_IRQHandler(&wwdg_handle);
}

void HAL_WWDG_EarlyWakeupCallback(WWDG_HandleTypeDef *hwwdg)
{
    wwdg_feed();
    led2_toggle();
}

void wwdg_feed(void)
{
    HAL_WWDG_Refresh(&wwdg_handle);
}

wwdg.h

#ifndef __WWDG_H__
#define __WWDG_H__

#include "sys.h"

void wwdg_init(uint8_t tr, uint8_t wr, uint32_t psc);
void wwdg_feed(void);

#endif

main.c

 

#include "sys.h"
#include "delay.h"
#include "led.h"
#include "uart1.h"
#include "wwdg.h"

int main(void)
{
    HAL_Init();                         /* 初始化HAL库 */
    stm32_clock_init(RCC_PLL_MUL9);     /* 设置时钟, 72Mhz */
    led_init();                         /* 初始化LED灯 */
    uart1_init(115200);
    wwdg_init(0x7f, 0x5f, WWDG_PRESCALER_8);
    printf("hello world!\r\n");
    
    if(__HAL_RCC_GET_FLAG(RCC_FLAG_WWDGRST) != RESET)
    {
        printf("窗口看门狗复位!\r\n");
        __HAL_RCC_CLEAR_RESET_FLAGS();
    }
    else
        printf("外部复位!\r\n");

    while(1)
    { 
        delay_ms(50);
        wwdg_feed();
        led1_toggle();
//        led1_on();
//        led2_off();
//        delay_ms(500);
//        led1_off();
//        led2_on();
//        delay_ms(500);
    }
}

led的代码前面有在此不再赘述