参照 https://www.xilinx.com/support/answers/54381.html
先uninstall
On Windows
- Navigate to <Xilinx install>\bin\ [nt|nt64] in an installed area.
- Open cmd console. 打开bin下的这个目录 。一路cd到nt 或者nt64 .64位系统是nt64
- Run "wdreg -inf windrvr6.inf uninstall"
- Run "wdreg -inf xusbdrvr.inf uninstall"
- Run "net stop XilinxPC4Driver"
- Delete "windows\system32\drivers\windrvr6.sys"
- Delete "windows\system32\drivers\xusb*.sys"
- Delete "windows\system32\drivers\xpc4drvr.sys
然后在install
On Windows
- Disconnect the Xilinx USB cable. Alternatively, you can disabled the USB cable in the device manager first then re-enable them in step 5; in this case, you will not even need to reboot.
- Navigate to <Xilinx install>\bin\ [nt|nt64] or <Xilinx install>[nt|nt64] in an installed area.
- Run wdreg -inf windrvr6.inf install
- Run wdreg -inf xusbdrvr.inf install
- Connect the Xilinx USB cable.