超级会员免费看
本文详细介绍了Rockchip RK808电源管理集成电路在设备树中的属性，包括必需的compatible属性、reg属性、gpios属性以及regulators子节点。还提到了可选的gpios、regulator-initial-mode等属性，并给出了示例配置，展示了如何设置DCDC和LDO电压范围、初始状态和不同挂起状态下的工作模式。
rk808 Power Management Integrated Circuit
Required properties:
- compatible: "rockchip,rk808"
- reg: I2C slave address
- gpios: the interrupt pin or sleep pin
use gpio get IRQ number
- regulators: This is the list of child nodes that specify the regulator
initialization data for defined regulators. Not all regulators for the given
device need to be present. The definition for each of these nodes is defined
using the standard binding for regulators found at
Documentation/devicetree/bindings/regulator/regulator.txt.
The regulator is matched with the regulator-compatible.
The valid regulator-compatible values are:
rk808: rk_dcdc1, rk_dcdc2, rk_dcdc3, rk_dcdc4, rk_
Required properties:
- compatible: "rockchip,rk808"
- reg: I2C slave address
- gpios: the interrupt pin or sleep pin
use gpio get IRQ number
- regulators: This is the list of child nodes that specify the regulator
initialization data for defined regulators. Not all regulators for the given
device need to be present. The definition for each of these nodes is defined
using the standard binding for regulators found at
Documentation/devicetree/bindings/regulator/regulator.txt.
The regulator is matched with the regulator-compatible.
The valid regulator-compatible values are:
rk808: rk_dcdc1, rk_dcdc2, rk_dcdc3, rk_dcdc4, rk_
订阅专栏 解锁全文
扫一扫
1844
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
