本文介绍了如何在MATLAB和Simulink中使用AnalogtoDigitalConverter(ADC)支持STM32F407芯片的硬件开发，以及在7系列板如STM32F746G和STM32F769I上进行代码验证、监控和参数调整的功能。然而，407芯片不支持XCP，适用于不同平台的开发示例和工具也被提及。
2023b的matlab，stm32f407芯片，运行内容Using the Analog to Digital Converter Block to Support STMicroelectronics STM32 Processor Based Boards
无法运行。
Connecting to the target...
错误:外部模式开放协议 Connect 命令失败
原因:
无法连接到目标应用程序: XCP 内部错误: timeout expired, in response to XCP CONNECT command
原因：
Monitor and Tuning Using STM32F746G-Discovery or STM32F769I-Discovery Board
When you are prototyping and developing algorithms, it is useful to monitor signals and tune parameters while the algorithms are running on the hardware. The Simulink Monitor & Tune feature enables this capability. The STM32F746G-Discovery and STM32F769I-Discovery boards support Monitor and Tuning over Universal Measurement and Calibration Protocol (XCP).
Simulink provides these additional features for the targets that support XCP:
-
Dashboard objects such as Slider and Dashboard Scope. For more information, see Dashboard.
-
Simulation Data Inspector (SDI) for visualizing the logged signals. For more information, see Simulation Data Inspector.
The STM32F4-Discovery board does not support XCP. For information about using the STM32F4-Discovery board, see External Mode Using the STM32F4-Discovery Board.
In this task, you will run the stm32f7discovery_external_mode model.
在线监控得上7系列！看不起用407的吗？
1159
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
