TP-LINK 路由器 无线桥接 设置

• 前言

家里Wifi信号不好,想用路由器桥接网络
正好家里有一款TP-LINK路由器,150M,型号为TL-WR742N.

将其当做副路由器(192.168.1.254),桥接主路由器(192.168.1.1)

如果家里没有任何其他联网设备
	那么,只有192.168.1.1 和 192.168.1.254 存在

• 副路由器(桥接路由器设置)

第一步 复位并登录副路由器
1. 长按复位10秒(此举会将路由器之前的设置重置)
2. 插入LAN口
3. ping 192.168.1.1(确认一定是LAN口,网线正常)
4. 浏览器输入 192.168.1.1,admin,admin


第二步 设置副路由器的IP和子网掩码 (以适配主路由器网段)
5. 更改默认IP
	网络参数->LAN口设置->IP地址改为192.168.1.254(具体看主路由器的网段和子网掩码)->保存
	注意: WAN口不连接,WAN口不设置
7. 重新启动

第三步 将副路由器无线连接至主路由器网段
8. ping 192.168.1.254
9. 浏览器输入 192.168.1.254,admin,admin
10. 桥接主路由器
	无线设置->基本设置->开启WDS(此时会提有页面刷新出桥接的SSID)->扫描->输入密码->保存
11. 关闭副路由器的DHCP服务
	//DHCP服务器->DHCP服务->不启用  // 连接 tp-link 有时候会出现分配不到地址的问题,改为启动试验
	DHCP服务器->DHCP服务->启用
	DHCP服务器->DHCP服务->网关 // 设置为 主路由器的IP 192.168.1.1
	DHCP服务器->DHCP服务->首选dns服务器 // 设置为 主路由器的IP 192.168.1.1
12. 查看运行状态
	运行状态->WAN口状态->WAN口未连接
	运行状态->无线状态->WDS状态:成功

第四步 设置副路由器无线广播SSID和密码

13. 设置副路由器广播ID
	无线设置->基本设置->SSID号
14. 设置副路由器密码
	无线设置->无线安全设置->WPA-PSK/WPA2-PSK->输入密码

第五步 重启路由器

15. 重启路由器
	系统工具->重启路由器

• win10 如何忘记wifi密码

1.右键wifi任务小图标,显示对话框 打开"网络和Internet"设置
2.点击  打开"网络和Internet"设置,进入"网络和Internet"
3.点击界面左侧WLAN,进入 WLAN
4.点击界面中间的 "管理已知网络"
5.点击 各个 SSID,并选择忘记

• 桥接后的192.168.1/24网段

 nmap 192.168.1.1/24
Starting Nmap 7.91 ( https://nmap.org ) at 2022-09-11 07:03 a/S
Nmap scan report for 192.168.1.1 // 主路由器
Host is up (0.0053s latency).
Not shown: 991 closed ports
PORT      STATE    SERVICE
21/tcp    open     ftp
53/tcp    open     domain
80/tcp    open     http
139/tcp   filtered netbios-ssn
445/tcp   open     microsoft-ds
5080/tcp  open     onscreen
8080/tcp  open     http-proxy
49152/tcp open     unknown
49153/tcp open     unknown
MAC Address: 74:13:BB:34:75:30 (Unknown)

Nmap scan report for 192.168.1.3 // 机顶盒
Host is up (0.0073s latency).
Not shown: 998 filtered ports
PORT   STATE SERVICE
53/tcp open  domain
80/tcp open  http
MAC Address: 80:12:DF:09:ED:40 (Shenzhen SuperElectron Technology)

Nmap scan report for 192.168.1.4 // 手机
Host is up (0.011s latency).
All 1000 scanned ports on 192.168.1.4 are closed
MAC Address: F4:30:8B:03:43:EA (Xiaomi Communications)

Nmap scan report for 192.168.1.5 // 手机
Host is up (0.011s latency).
All 1000 scanned ports on 192.168.1.5 are closed
MAC Address: 88:46:04:44:97:8C (Unknown)

Nmap scan report for 192.168.1.9 // 手机
Host is up (0.029s latency).
All 1000 scanned ports on 192.168.1.9 are closed
MAC Address: 4A:16:D5:23:0B:BB (Unknown)

Nmap scan report for 192.168.1.254 // 副路由器
Host is up (0.0062s latency).
Not shown: 997 filtered ports
PORT     STATE  SERVICE
80/tcp   open   http
1024/tcp closed kdm
1900/tcp open   upnp
MAC Address: 1C:FA:68:97:CD:B2 (Tp-link Technologies)

Nmap scan report for 192.168.1.7 // 电脑
Host is up (0.00067s latency).
Not shown: 991 closed ports
PORT      STATE SERVICE
135/tcp   open  msrpc
139/tcp   open  netbios-ssn
445/tcp   open  microsoft-ds
554/tcp   open  rtsp
902/tcp   open  iss-realsecure
912/tcp   open  apex-mesh
2869/tcp  open  icslap
5357/tcp  open  wsdapi
10243/tcp open  unknown

Nmap scan report for 192.168.1.100 // ???
Host is up (0.00030s latency).
Not shown: 992 closed ports
PORT      STATE SERVICE
135/tcp   open  msrpc
445/tcp   open  microsoft-ds
554/tcp   open  rtsp
902/tcp   open  iss-realsecure
912/tcp   open  apex-mesh
2869/tcp  open  icslap
5357/tcp  open  wsdapi
10243/tcp open  unknown

Nmap done: 256 IP addresses (8 hosts up) scanned in 60.06 seconds