1、定时器初始化
oid timer2_config()
{
timer_oc_parameter_struct timer_ocintpara;
timer_parameter_struct timer_initpara;
rcu_periph_clock_enable(RCU_GPIOC);
rcu_periph_clock_enable(RCU_TIMER2);
timer_deinit(TIMER2);
gpio_mode_set(GPIOC, GPIO_MODE_AF, GPIO_PUPD_NONE, GPIO_PIN_6|GPIO_PIN_7|GPIO_PIN_8);//
gpio_output_options_set(GPIOC, GPIO_OTYPE_PP, GPIO_OSPEED_50MHZ,GPIO_PIN_6|GPIO_PIN_7|GPIO_PIN_8);
gpio_af_set(GPIOC, GPIO_AF_2, GPIO_PIN_6|GPIO_PIN_7|GPIO_PIN_8);
/* TIMER2 configuration */
timer_initpara.prescaler = 2000-1;
timer_initpara.alignedmode = TIMER_COUNTER_EDGE;
timer_initpara.counterdirection = TIMER_COUNTER_UP;
timer_initpara.period = 99;
timer_initpara.clockdivision = TIMER_CKDIV_DIV1;
timer_initpara.repetitioncounter = 0;
timer_init(TIMER2, &timer_initpara);
/* CH0,CH1 and CH2 configuration in PWM mode */
// timer_channel_output_struct_para_init(&timer_ocintpara);
timer_ocintpara.ocpolarity = TIMER_OC_POLARITY_HIGH;
timer_ocintpara.outputstate = TIMER_CCX_ENABLE;
timer_ocintpara.ocnpolarity = TIMER_OCN_POLARITY_HIGH;
timer_ocintpara.outputnstate = TIMER_CCXN_DISABLE;
timer_ocintpara.ocidlestate = TIMER_OC_IDLE_STATE_LOW;
timer_ocintpara.ocnidlestate = TIMER_OCN_IDLE_STATE_LOW;
timer_channel_output_config(TIMER2,TIMER_CH_0,&timer_ocintpara);
timer_channel_output_config(TIMER2,TIMER_CH_1,&timer_ocintpara);
timer_channel_output_config(TIMER2,TIMER_CH_2,&timer_ocintpara);
/* CH0 configuration in PWM mode0,duty cycle 25% */
timer_channel_output_pulse_value_config(TIMER2,TIMER_CH_0,0);
timer_channel_output_mode_config(TIMER2,TIMER_CH_0,TIMER_OC_MODE_PWM0);
timer_channel_output_shadow_config(TIMER2,TIMER_CH_0,TIMER_OC_SHADOW_DISABLE);
/* CH1 configuration in PWM mode0,duty cycle 50% */
timer_channel_output_pulse_value_config(TIMER2,TIMER_CH_1,0);
timer_channel_output_mode_config(TIMER2,TIMER_CH_1,TIMER_OC_MODE_PWM0);
timer_channel_output_shadow_config(TIMER2,TIMER_CH_1,TIMER_OC_SHADOW_DISABLE);
/* CH2 configuration in PWM mode0,duty cycle 75% */
timer_channel_output_pulse_value_config(TIMER2,TIMER_CH_2,0);
timer_channel_output_mode_config(TIMER2,TIMER_CH_2,TIMER_OC_MODE_PWM0);
timer_channel_output_shadow_config(TIMER2,TIMER_CH_2,TIMER_OC_SHADOW_DISABLE);
/* auto-reload preload enable */
timer_auto_reload_shadow_enable(TIMER2);
/* TIMER5 counter enable */
timer_enable(TIMER2);
}
2、main 函数循环发波,占空比分别为 10 50 100
timer_channel_output_pulse_value_config(TIMER2,TIMER_CH_0,10);
timer_channel_output_pulse_value_config(TIMER2,TIMER_CH_1,50);
timer_channel_output_pulse_value_config(TIMER2,TIMER_CH_2,100);