Beginning Auto Layout Tutorial in iOS 7: Part 1

本篇是学习iOS Auto Layout难得的好资料，值得一读！资料来自www.raywenderlich.com

----------------------------------------------------------------------------

Note from Ray: Tutorial Team member Matthijs Hollemans (the iOS Apprentice Series author) has ported this tutorial to iOS 7 as part of the iOS 7 feast. We hope you enjoy!

Have you ever been frustrated trying to make your apps look good in both portrait and landscape orientation? Is making screen layouts that support both the iPhone and iPad driving you to the brink of madness? Despair no longer, I bring you good news!

It’s not hard to design a user interface for a screen that is always guaranteed to be the same size, but if the screen’s frame can change, the positions and sizes of your UI elements also have to adapt to fit into these new dimensions.

Until now, if your designs were reasonably complex, you had to write a lot of code to support such adaptive layouts. You will be glad to hear that this is no longer the case – iOS 6 brings an awesome new feature to the iPhone and iPad: Auto Layout. Xcode 5 and iOS 7 make it even better! If you tried Auto Layout in Xcode 4 and gave up, then you really should give Xcode 5 another chance.

Not only does Auto Layout makes it easy to support different screen sizes in your apps, as a bonus it also makes internationalization almost trivial. You no longer have to make new nibs or storyboards for every language that you wish to support, and this includes right-to-left languages such as Hebrew or Arabic.

This Auto Layout tutorial shows you how to get started with Auto Layout using Interface Builder. In iOS 6 by Tutorials, we take this tutorial even further, and then have an entirely new chapter that builds on this knowledge and shows you how to unleash the full power of Auto Layout via code.

Note: We are in the process of updating all of the chapters in iOS 6 by Tutorials to iOS 7 – and this is a sneak preview of that update! When we’re done, the update will be a free download to all iOS 6 by Tutorials PDF customers.

So grab a snack and your favorite caffeinated beverage, and get ready to become an Auto Layout master!

The problem with springs and struts

You are no doubt familiar with autosizing masks – also known as the “springs and struts” model. The autosizing mask determines what happens to a view when its superview changes size. Does it have flexible or fixed margins (the struts), and what happens to its width and height (the springs)?

For example, with a flexible width the view will become proportionally wider if the superview also becomes wider. And with a fixed right margin, the view’s right edge will always stick to the superview’s right edge.

The autosizing system works well for simple cases, but it quickly breaks down when your layouts become more intricate. Let’s look at an example where springs and struts simply don’t cut it.

Open Xcode 5 and create a new iPhone project based on the Single View Application template. Call the app “StrutsProblem”:

Click on Main.storyboard to open it in Interface Builder. Before you do anything else, first disable Auto Layout for this storyboard. You do that in the File inspector, the first of the six tabs:

Uncheck the Use Autolayout box. Now the storyboard uses the old struts-and-springs model.

Note: Any new nib or storyboard files that you create with Xcode 4.5 or better will have Auto Layout activated by default. Because Auto Layout is an iOS 6-and-up feature only, if you want to use the latest Xcode to make apps that are compatible with iOS 5, you need to disable Auto Layout on any new nibs or storyboard files by unchecking the “Use Autolayout” checkbox.

Drag three new views onto the main view and line them up like this:

For clarity, give each view its own color so that you can see which is which.

Each view is inset 20 points from the window’s borders; the padding between the views is also 20 points. The bottom view is 280 points wide and the two views on top are both 130 points wide. All views are 254 points high.

Run the app on the iPhone Retina 4-inch simulator and rotate the simulator to landscape. That will make the app look like this, not quite what I had in mind:

Note: You can rotate the simulator using the Hardware\Rotate Left and Rotate Right menu options, or by holding down ⌘ on your keyboard and tapping the left or right arrow keys.

Instead, you want the app to look like this in landscape:

Obviously, the autosizing masks for all three views leave a little something to be desired. Change the autosizing settings for the top-left view to:

This makes the view stick to the top and left edges (but not the bottom and right edges), and resizes it both horizontally and vertically when the superview changes its size.

Similarly, change the autosizing settings for the top-right view:

And for the bottom view:

Run the app again and rotate to landscape. It should now look like this:

Close, but not quite. The padding between the views is not correct. Another way of looking at it is that the sizes of the views are not 100% right. The problem is that the autosizing masks tell the views to resize when the superview resizes, but there is no way to tell them by how much they should resize.

You can play with the autosizing masks – for example, change the flexible width and height settings (the “springs”) – but you won’t get it to look exactly right with a 20-point gap between the three views.

To solve this layout problem with the springs and struts method, unfortunately you will have to write some code.

UIKit sends several messages to your view controllers before, during and after rotating the user interface. You can intercept these messages to make changes to the layout of your UI. Typically you would overrideviewWillLayoutSubviews to change the frames of any views that need to be rearranged.

Before you can do that, you first have to make outlet properties to refer to the views to be arranged.

Switch to the Assistant Editor mode (middle button on the Editor toolset on the Xcode toolbar) and Ctrl-drag from each of the three views onto ViewController.m:

Connect the views to these three properties, respectively:

@property (weak, nonatomic) IBOutlet UIView *topLeftView;
@property (weak, nonatomic) IBOutlet UIView *topRightView;
@property (weak, nonatomic) IBOutlet UIView *bottomView;

Add the following code to  ViewController.m :

- (void)viewWillLayoutSubviews
{
    if (UIInterfaceOrientationIsLandscape(self.interfaceOrientation))
    {
        CGRect rect = self.topLeftView.frame;
        rect.size.width = 254;
        rect.size.height = 130;
        self.topLeftView.frame = rect;
 
        rect = self.topRightView.frame;
        rect.origin.x = 294;
        rect.size.width = 254;
        rect.size.height = 130;
        self.topRightView.frame = rect;
 
        rect = self.bottomView.frame;
        rect.origin.y = 170;
        rect.size.width = 528;
        rect.size.height = 130;
        self.bottomView.frame = rect;
    }
    else
    {
        CGRect rect = self.topLeftView.frame;
        rect.size.width = 130;
        rect.size.height = 254;
        self.topLeftView.frame = rect;
 
        rect = self.topRightView.frame;
        rect.origin.x = 170;
        rect.size.width = 130;
        rect.size.height = 254;
        self.topRightView.frame = rect;
 
        rect = self.bottomView.frame;
        rect.origin.y = 295;
        rect.size.width = 280;
        rect.size.height = 254;
        self.bottomView.frame = rect;
    }
}

This callback occurs when the view controller is rotating to a new orientation. It looks at the orientation the view controller has rotated to and resizes the views appropriately – in this case with hardcoded offsets based on the known screen dimensions of the iPhone. This callback occurs within an animation block, so the changes in size will animate.

Don’t run the app just yet. First you have to restore the autosizing masks of all three views to the following, or the autosizing mechanism will clash with the positions and sizes you set on the views inviewWillLayoutSubviews:

That should do it. Run the app and flip to landscape. Now the views line up nicely. Flip back to portrait and verify that everything looks good there as well.

It works, but that was a lot of code you had to write for a layout that is pretty simple. Imagine the effort it takes for layouts that are truly complex, especially dynamic ones where the individual views change size, or the number of subviews isn’t fixed.

Now try running the app on the 3.5-inch simulator. Whoops. The positions and sizes of the views are wrong because the hardcoded coordinates in viewWillLayoutSubviews are based on the dimensions of the 4-inch phone (320×568 instead of 320×480). You could add another if-statement that checks the screen size and uses a different set of coordinates, but you can see that this approach is becoming unworkable quickly.

Note: Another approach you can take is to make separate nibs for the portrait and landscape orientations. When the device rotates you load the views from the other nib and swap out the existing ones. But this is still a lot of work and it adds the trouble of having to maintain two nibs instead of one. This approach is quite impractical when you’re using storyboards instead of nibs.

Auto Layout to the rescue!

You will now see how to accomplish this same effect with Auto Layout. First, remove viewWillLayoutSubviewsfrom ViewController.m, because you’re going to do this without writing any code.

Select Main.storyboard and in the File inspector panel, check the Use Autolayout box to enable Auto Layout for this storyboard file:

Note: Auto Layout is always enabled for the entire nib or storyboard file. All the views inside that nib or storyboard will use Auto Layout if you check that box.

Run the app and rotate to landscape. It now looks like this:

Let’s put Auto Layout into action. Hold down the ⌘ key while you click on the two views on the top (the green and yellow ones), so that both are selected. From Xcode’s Editor menu, select Pin\Widths Equally:

Select the same two views again and choose Editor\Pin\Horizontal Spacing. (Even though the two views appear selected after you carry out the first Pin action, do note that they are in a special layout relationship display mode. So you do have to reselect the two views.)

The storyboard now looks like this:

The orange “T-bar” shaped things represent the constraints between the views. So far you added two constraints: an Equal Widths constraint on both views (represented by the bars with the equals signs) and a Horizontal Space constraint that sits between the two views. Constraints express relationships between views and they are the primary tool you use to build layouts using Auto Layout. It might look a bit scary, but it is actually quite straightforward once you learn what it all means.

To continue building the layout for this screen, perform the following steps. Each step adds more orange T-bars.

For the view on the left, choose from the Editor\Pin menu:

• Top Space to Superview
• Leading Space to Superview

For the view on the right, choose:

• Top Space to Superview
• Trailing Space to Superview

And for the big view at the bottom:

• Leading Space to Superview
• Trailing Space to Superview
• Bottom Space to Superview

You should now have the following constraints:

Notice that the T-bars are still orange. That means your layout is incomplete; Auto Layout does not have enough constraints to calculate the positions and sizes of the views. The solution is to add more constraints until they turn blue.

Hold down ⌘ and select all three views. From the Editor menu, choose Pin\Heights Equally.

Now select the top-left corner view and the bottom view (using ⌘ as before), and choose Editor\Pin\Vertical Spacing.

Interface Builder should show something like this:

The T-bars have become blue. Auto Layout now has enough information to calculate a valid layout. It looks a bit messy but that’s because the Equal Widths and Equal Heights constraints take up a lot of room.

Run the app and… voila, everything looks good again, all without writing a single line of code! It also doesn’t matter which simulator you run this on; the layout works fine on 3.5-inch as well as 4-inch devices.

Cool, but what exactly did you do here? Rather than requiring you to hard-code how big your views are and where they are positioned, Auto Layout lets you express how the views in your layout relate to each other.

You have put the following relationships – what is known as constraints – into the layout:

• The top-left and top-right views always have the same width (that was the first pin widths equally command).
• There is a 20-point horizontal padding between the top-left and top-right views (that was the pin horizontal spacing).
• All the views always have the same height (the pin heights equally command).
• There is a 20-point vertical padding between the two views on top and the one at the bottom (the pin vertical spacing).
• There is a 20-point margin between the views and the edges of the screen (the top, bottom, leading, and trailing space to superview constraints).

And that is enough to express to Auto Layout where it should place the views and how it should behave when the size of the screen changes.

You can see all your constraints in the Document Outline on the left. The section named Constraints was added when you enabled Auto Layout for the storyboard. (If you don’t see the outline pane, then click the arrow button at the bottom of the Interface Builder window.)

If you click on a constraint in the Document Outline, Interface Builder will highlight where it sits on the view by drawing a white outline around the constraint and adding a shadow to it so that it stands out:

Constraints are real objects (of class NSLayoutConstraint) and they also have attributes. For example, select the constraint that creates the padding between the two top views (it is named “Horizontal Space (20)” but be sure to pick the correct one) and then switch to the Attributes inspector. There you can change the size of the margin by editing the Constant field.

Set it to 100 and run the app again. Now the margin is a lot wider:

Auto Layout is a lot more expressive than springs and struts when it comes to describing the views in your apps. In the rest of this tutorial, you will learn all about constraints and how to apply them in Interface Builder to make different kinds of layouts.

How Auto Layout works

As you’ve seen in the test drive above, the basic tool in Auto Layout is the constraint. A constraint describes a geometric relationship between two views. For example, you might have a constraint that says:

“The right edge of label A is connected to the left edge of button B with 20 points of empty space between them.”

Auto Layout takes all of these constraints and does some mathematics to calculate the ideal positions and sizes of all your views. You no longer have to set the frames of your views yourself – Auto Layout does that for you, entirely based on the constraints you have set on those views.

Before Auto Layout, you always had to hard-code the frames of your views, either by placing them at specific coordinates in Interface Builder, by passing a rectangle into initWithFrame:, or by setting the view’s frame,bounds or center properties.

For the app that you just made, you specifically set the frames to:

You also set autosizing masks on each of these views:

That is no longer how you should think of your screen designs. With Auto Layout, all you need to do is this:

The sizes and positions of the views are no longer important; only the constraints matter. Of course, when you drag a new button or label on to the canvas it will have a certain size and you will drop it at a certain position, but that is only a design aid that you use to tell Interface Builder where to put the constraints.

Designing like you mean it

The big advantage of using constraints is that you no longer have to fiddle with coordinates to get your views to appear in the proper places. Instead, you can describe to Auto Layout how the views are related to each other and Auto Layout will do all the hard work for you. This is called designing by intent.

When you design by intent, you’re expressing what you want to accomplish but not necessarily how it should be accomplished. Instead of saying: “the button’s top-left corner is at coordinates (20, 230)”, you now say:

“The button is centered vertically in its superview, and it is placed at a fixed distance from the left edge of the superview.”

Using this description, Auto Layout can automatically calculate where your button should appear, no matter how big or small that superview is.

Other examples of designing with intent (and Auto Layout can handle all of these instructions):

“These two text fields should always be the same size.”
“These two buttons should always move together.”
“These four labels should always be right-aligned.”

This makes the design of your user interfaces much more descriptive. You simply define the constraints, and the system calculates the frames for you automatically.

You saw in the first section that even a layout with just a few views needs quite a bit of work to layout properly in both orientations. With Auto Layout you can skip all that effort. If you set up your constraints properly, then the layout should work without any changes in both portrait and landscape.

Another important benefit of using Auto Layout is internationalization. Text in German, for example, is infamous for being very long and getting it to fit into your labels can be a headache. Again, Auto Layout takes all this work out of your hands, because it can automatically resize your labels based on the content they need to display – and have everything else adapt with constraints.

Adding support for German, French, or any other language is now simply a matter of setting up your constraints, translating the text, and… that’s it!

The best way to get the hang of Auto Layout is to play with it, so that’s exactly what you will do in the rest of this tutorial.

Note: Auto Layout is not just useful for rotation; it can also easily scale your UI up and down to accommodate different screen sizes. It is no coincidence that this technology was added to iOS at the same time that the iPhone 5 and its taller screen came out! Auto Layout makes it a lot easier to stretch your apps’ user interfaces to fill up that extra vertical space on the iPhone 5. And with Dynamic Type in iOS 7, Auto Layout has become even more important. Users can now change the global text size setting — with Auto Layout this is easy to support in your own apps.

Courting constraints

Close your current project and create a new iPhone project using the Single View Application template. Name it “Constraints”. Any new projects that you create with Xcode 5 automatically assume that you will be using Auto Layout, so you do not need to do anything special to enable it.

Click on Main.storyboard to open Interface Builder. Drag a new Button onto the canvas. Notice that while you’re dragging, dashed blue lines appear. These lines are known as the guides:

There are guides around the margins of the screen, as well as in the center:

If you have used Interface Builder before, then you have no doubt seen these guides. They are helpful hints that make it easier to align stuff.

In Xcode 4 with Auto Layout enabled, the guides had a different purpose. You still used them for alignment, but they also told you where the new constraints would go. If you dropped the button in the top-left corner against the blue guides, the storyboard in Xcode 4 would look like this:

There are two blue thingies attached to the button. These T-bar shaped objects are the constraints. No matter where you placed your UI controls in Xcode 4′s Interface Builder, they always were given valid constraints. That sounded like a good idea in theory but in practice it made Auto Layout incredibly hard to use from Interface Builder.

Fortunately, that has changed for the better with Xcode 5. After you drop the button into the canvas, there are no T-bars to be seen:

Notice that there is no Constraints section in the Document Outline pane either. Conclusion: this button does not have any constraints set on it.

But how can this work? You just learned that Auto Layout always needs enough constraints to determine the size and position of all the views, but here you have no constraints at all. Surely this is an incomplete layout?

This is where Xcode 5 is a big improvement over Xcode 4: it no longer forces you to always have a valid layout.

Note: It is a bad idea to run an app with an invalid layout because Auto Layout cannot properly compute where the views should go. Either the positions of the views will be unpredictable (not enough constraints) or the app will crash (too many constraints). Yikes!

Xcode 4 tried to prevent this from happening by making sure there were always exactly enough constraints to create a valid layout. Unfortunately, it often did this by removing your own constraints and replacing them by constraints you did not actually want. That could be very frustrating and many developers gave up on Auto Layout for this reason.

Xcode 5 is not nearly as rude. It allows you to have incomplete layouts while you’re editing the storyboard but it also points out what you still need to fix. Using Interface Builder to create Auto Layout-driven user interfaces has become a lot more fun — and a lot less time-consuming — with Xcode 5.

If you don’t supply any constraints at all, Xcode automatically assigns a set of default constraints, known as theautomatic constraints. It does this at compile time when your app is built, not at design time. Auto Layout in Xcode 5 works hard to stay out of your way while you’re designing your user interfaces, and that’s just how we like it.

The automatic constraints give your views a fixed size and position. In other words, the view always has the same coordinates as you see in the storyboard. This is very handy because it means you can largely ignore Auto Layout. You simply don’t add constraints if the default ones are sufficient and only create constraints for those views that need special rules.

OK, let’s play around a bit with constraints and see what they can do. Right now, the button is in the top-left corner and has no constraints. Make sure the button is aligned with the two corner guides.

Add two new constraints to the button using the Editor\Pin menu, so that it looks like this:

If you hadn’t guessed already, that is the Leading Space to Superview and the Top Space to Superviewoptions.

All the constraints are also listed in the Document Outline pane on the left-hand side of the Interface Builder window:

There are currently two constraints, a Horizontal Space between the button and the left edge of the main view, and a Vertical Space between the button and the top edge of the main view. The relationship that is expressed by these constraints is:

“The button always sits at 20 points from the top-left corner in its superview.”

Note: These aren’t actually very useful constraints to make because they’re the same as the automatic ones. If you always want your button to be relative to the top-left corner of its superview, then you might as well not provide any constraints at all and let Xcode make them for you.

Now pick up the button and place it in the scene’s top-right corner, again against the blue guides:

Whoa, what has happened here? In Xcode 4 this would have broken the old constraints and assigned new ones based on the blue guides, but in Xcode 5 the button keeps the existing constraints. The problem here is that the size and position of the button in Interface Builder no longer correspond with the size and position that Auto Layout expects based on the constraints. This is called a misplaced view.

Run the app. The button will still appear in the top-left corner of the screen:

When it comes to Auto Layout, orange is bad. Interface Builder drew two orange boxes: one with a dashed border and one with a solid border. The dashed box displays the view’s frame according to Auto Layout. The solid orange box is the view’s frame according to how you placed it in the scene. These two should match up, but here they don’t.

How you fix this depends on what you want to achieve:

• Do you want the button to be attached to the left edge of the screen at a distance of 254 points? In that case you need to make the existing Horizontal Space constraint 234 points bigger. That’s what the orange badge with “+234″ means.
• Do you want the button to be attached to the right edge of the screen instead? Then you need to remove the existing constraint and create a new one.

Delete the Horizontal Space constraint. First select it in the canvas or in the Document Outline, and then press the Delete key on your keyboard.

Notice that this turns the Vertical Space constraint orange. Until now it was blue. There is nothing wrong with that particular constraint; it just means there are not enough constraints left to determine the complete position of the button. You still need to add a constraint for the X-position.

Note: You may be wondering why Xcode does not add an automatic constraint for the X-position. The rule is that Xcode only creates automatic constraints if you did not set any constraints of your own. As soon as you add a single constraint, you tell Xcode that you’re now taking responsibility for this view. Xcode will no longer make any automatic constraints and expects you to add any other constraints this view needs.

Select the button and choose Editor\Pin\Trailing Space to Superview. This puts a new constraint between the right edge of the button and the right edge of the screen. This expresses the relationship:

“The button always sits at 20 points from the top-right corner in its superview.”

Run the app and rotate to landscape. Notice how the button keeps the same distance from the right screen edge:

When you place a button (or any other view) against the guides and make a constraint, you get a spacing constraint with a standard size that is defined by the “HIG”, Apple’s iOS Human Interface Guidelines document. For margins around the edges, the standard size is a space of 20 points.

Now drag the button over to the left a little:

Again you get a dashed orange box because the view is misplaced. Let’s say this new button position is indeed what you want. It’s not uncommon to make a constraint and then nudge the view by a few pixels, making the orange boxes appear. One way to fix this is to remove the constraint and make a new one, but there is an easier solution.

The Editor menu has a Resolve Auto Layout Issues submenu. From that menu, choose Update Constraints. In my case, this tells Interface Builder it should make the constraint 64 points larger, as so:

Great, the T-bars turn blue again and the layout is valid. In the Document Outline, you can see that the Horizontal Space constraint no longer has a standard space:

So far you’ve played with Horizontal Space and Vertical Space constraints. There is also a “center” constraint. Drag a new Button object to the bottom center of the canvas, so that it snaps into place with the guides:

To keep the button always center-aligned with its superview, on the horizontal axis, you need to add a Center X Alignment constraint. From the Editor menu choose Align\Horizontal Center in Container. This adds a long orange line:

The line is orange because you’ve only specified what happens to the X-coordinate of the button, not its Y-coordinate. Use the Editor\Pin menu to add a Vertical Space constraint between the button and the bottom of the view. It should look like this:

In case you didn’t know how, it is the Bottom Space to Superview option. The Vertical Space constraint keeps the button away from the bottom of the view (again, using the standard margin).

Run the app and rotate it to landscape. Even in landscape mode, the button stays at the bottom center of the screen:

That’s how you express intent: “This button should always be at bottom center.” Notice that nowhere did you have to tell Interface Builder what the button’s coordinates are, only where you want it anchored in the view.

With Auto Layout, you’re no longer supposed to care about the exact coordinates of where you place your views on the canvas or what their size is. Instead, Auto Layout derives these two things from the constraints that you set.

You can see this paradigm shift in the Size inspector for the button, which is now quite different:

With Auto Layout disabled, typing into the X, Y, Width or Height fields will change the position and size of the selected view. With Auto Layout enabled you can still type new values into these fields, but if you already have constraints set on the view it may now become misplaced. You also have to update the constraints to make them match the new values.

For example, change the Width value of the button to 100. The canvas turns into something like this:

Xcode 4 would have replaced the Center X Alignment constraint with a Horizontal Space and a new constraint on the button itself that forces it to have a width of 100 points. However, Xcode 5 simply says, “It’s fine with me if you want the width to be 100 points but just so you know, that’s not what the constraints say.”

In this case you do want the button to be 100 points wide. There is a special type of constraint for this: the Fixed Width constraint. First press Undo so that the button is centered again and the T-bars are all blue. Select the button and choose Editor\Pin\Width. This puts a new T-bar below the button:

Select that T-bar and in the Attributes inspector change Constant to 100. This forces the button to always be 100 points wide, no matter how large or small its title. To see this a bit better you can give the button a background color:

You can also see this new Width constraint in the Document Outline on the left:

Unlike the other constraints, which are between the button and its superview, the Width constraint only applies to the button itself. You can think of this as a constraint between the button and… the button.

You may wonder why the button did not have a Width constraint before. How did Auto Layout know how wide to make the button without it?

Here’s the thing: the button itself knows how wide it must be. It calculates this based on its title text plus some padding. If you set a background image on the button, it also takes that into account.

This is known as the intrinsic content size. Not all controls have this, but many do (UILabel is another example). If a view can calculate its own preferred size, then you do not need to set specific Width or Height constraints on it. You will see more of this later.

To return the button to its optimal size, first remove the Width constraint. Then select the button and chooseSize to Fit Content from the Editor menu. This restores the button’s intrinsic content size.

It takes two to tango

Guides do not appear only between a view and its superview, but also between views on the same level of the view hierarchy. To demonstrate this, drag a new button onto the canvas. If you drag this button close to the others, then their guides start to interact.

Put the new button next to the existing one so that it snaps into place:

There are quite a few dotted guidelines here. Interface Builder recognizes that these two buttons can align in different ways – at their tops, centers and baselines.

Xcode 4 would have turned one of these snapping guides into a new constraint. But with Xcode 5, if you want to have a constraint between these two buttons, you have to make it yourself. You’ve seen that you can use theEditor\Pin menu to make a constraint between two views, but there is an easier way too.

Select the new button and Ctrl-drag to the other button, like so:

When you let go of the mouse button, a popup appears. Choose the first option, Horizontal Spacing.

This creates a new constraint that looks like this:

It is orange, meaning that this button needs at least one other constraint. The size of the button is known — it uses the intrinsic content size — and there is a constraint for the button’s X-position. That leaves only the Y-position without a constraint.

Here the missing constraint is pretty easy to determine but for more complicated designs it may not always be immediately obvious. Fortunately, you don’t have to guess. Xcode has been keeping score and can tell you exactly what is missing.

There is small a red arrow in the Document Outline, next to View Controller Scene. Click that arrow to see a list of all Auto Layout issues:

Sweet! Let’s add that missing Y-position constraint. Ctrl-drag from the new button downwards:

The popup menu has different options this time. The items in this menu depend on the context — which views are you dragging between — and the direction you moved the mouse. Choose Bottom Space to Bottom Layout.

The new button now has a Vertical Space to the bottom of the screen, but also a Horizontal Space that links it with the other button. Because this space is small (only 8 points), the T-bar may be a bit hard to see, but it is definitely there.

Click on the Horizontal Space (8) constraint in the Document Outline to select it:

When you select a constraint, it lights up the controls it belongs to. This particular constraint sits between the two buttons. What you’ve done here is say:

“The second button always appears on the left of the first one, no matter where the first button is positioned or how big it is.”

Select the button with the yellow background and type something long into its label like “A longer label”. When you’re done, the button resizes to make room for the new text, and the other button shifts out of the way. After all, it is attached to the first button’s left edge, so that is exactly what you intended to happen:

Just to get a better feel for how this works, play with this some more. Drag another button into the canvas and put it above the yellow one, so that they snap into place vertically (but don’t try to align the left edges of the two buttons):

Give the new button a background color (green) so you can more easily see its extents.

Because you snapped the two buttons together, there is now a standard space of 8 points between them that is recommended by the HIG. Turn this into a constraint by Ctrl-dragging between the two buttons. SelectVertical Spacing from the popup menu.

Note: The “HIG”, which is short for iOS Human Interface Guidelines, contains Apple’s recommendations for designing good user interfaces. It is mandatory reading for any iOS developer. The HIG explains which UI elements are appropriate to use under which circumstances, and best practices for using them. You can find this document here.

You are not limited to standard spacing between controls, though. Constraints are full-fledged objects, just like views, and therefore have attributes that you can change.

Select the Vertical Space constraint between the two buttons. You can do this in the canvas by clicking the T-bar, although that tends to be a bit finicky. By far the easiest method is to click on the constraint in the Document Outline. Once you have it selected, switch to the Attributes inspector:

Type 40 into the Constant field to change how big the constraint is. Now the two buttons will be further apart, but they are still connected:

Run the app and flip to landscape to see the effect:

The buttons certainly keep their vertical arrangement, but not their horizontal one! The reason should be obvious: the green button does not have a constraint for its X-position yet.

Adding a Horizontal Space from the green button to the left edge of the canvas won’t solve this problem. With such a constraint the green button always keeps the same X-coordinate, even in landscape. That doesn’t look very nice, so instead you are going to express the following intention:

“The yellow button will always be horizontally centered, and the green button will align its left edge with the left edge of the yellow button.”

You already have a constraint for the first condition, but not for the second. Interface Builder shows guides for alignment, so you can drag the top button until its left edge snaps with the yellow button:

If you also dragged the button vertically, the frame of the button and the Vertical Space constraint may no longer agree on the correct distance. You will see an orange badge on the T-bar:

If this happens, simply use the arrow keys to nudge the button into place again until the badge disappears.

Finally, Ctrl-drag between the two buttons and from the popup menu choose Left. This creates an alignment constraint that says: “The left edges of these two views are always aligned”. In other words, the two buttons will always have the exact same X-position. That solves the layout problem and the T-bars turn blue:

Run the app and rotate to landscape to verify that it works:

Where To Go From Here?

Now that you’ve got your first taste of Auto Layout, how do you like it? It can take a bit of getting used to, but can make your life a lot easier and your apps much more flexible!

Want to learn more? Keep reading for part 2 of this Auto Layout tutorial, where you’ll continue playing with the buttons in Interface Builder to get a better understanding of the possibilities Auto Layout offers — and the problems you may encounter.

From: http://www.raywenderlich.com/50317/beginning-auto-layout-tutorial-in-ios-7-part-1