初始化时需要求出的变量：相机和imu外参r t、重力g、尺度s、陀螺仪和加速度计偏置ba bg。
下面对两种算法初始化的详细步骤进行对比：
求陀螺仪偏置bg
- 求解公式相同，求解方法不同。公式如下，VI ORB-SLAM使用图优化的方式。
Vector3d Optimizer::OptimizeInitialGyroBias(const vector<cv::Mat>& vTwc, const vector<IMUPreintegrator>& vImuPreInt) { int N = vTwc.size(); if(vTwc.size()!=vImuPreInt.size()) cerr<<"vTwc.size()!=vImuPreInt.size()"<<endl; Matrix4d Tbc = ConfigParam::GetEigTbc(); Matrix3d Rcb = Tbc.topLeftCorner(3,3).transpose(); // Setup optimizer g2o::SparseOptimizer optimizer; g2o::BlockSolverX::LinearSolverType * linearSolver; linearSolver = new g2o::LinearSolverEigen<g2o::BlockSolverX::PoseMatrixType>(); g2o::BlockSolverX * solver_ptr = new g2o::BlockSolverX(linearSolver); g2o::OptimizationAlgorithmGaussNewton* solver = new g2o::OptimizationAlgorithmGaussNewton(solver_ptr); //g2o::OptimizationAlgorithmLevenberg* solver = new g2o::OptimizationAlgorithmLevenberg(solver_ptr); optimizer.setAlgorithm(solver); // Add vertex of gyro bias, to optimizer graph g2o::VertexGyrBias * vBiasg = new g2o::VertexGyrBias(); vBiasg->setEstimate(Eigen::Vector3d::Zero()); vBiasg->setId(0); optimizer.addVertex(vBiasg); // Add unary edges for gyro bias vertex //for(std::vector<KeyFrame*>::const_iterator lit=vpKFs.begin(), lend=vpKFs.end(); lit!=lend; lit++) for(int i=0; i<N; i++) { // Ignore the first KF if(i==0) continue; const cv::Mat& Twi = vTwc[i-1]; // pose of previous KF Matrix3d Rwci = Converter::toMatrix3d(Twi.rowRange(0,3).colRange(0,3)); //Matrix3d Rwci = Twi.rotation_matrix(); const cv::Mat& Twj = vTwc[i]; // pose of this KF Matrix3d Rwcj = Converter::toMatrix3d(Twj.rowRange(0,3).colRange(0,3)); //Matrix3d Rwcj =Twj.rotation_matrix(); const IMUPreintegrator& imupreint = vImuPreInt[i]; g2o::EdgeGyrBias * eBiasg = new g2o::EdgeGyrBias(); eBiasg->setVertex(0, dynamic_cast<g2o::OptimizableGraph::Vertex*>(optimizer.vertex(0))); // measurement is not used in EdgeGyrBias eBiasg->dRbij = imupreint.getDeltaR(); eBiasg->J_dR_bg = imupreint.getJRBiasg(); eBiasg->Rwbi = Rwci*Rcb; eBiasg->Rwbj = Rwcj*Rcb; //eBiasg->setInformation(Eigen::Matrix3d::Identity()); eBiasg->setInformation(imupreint.getCovPVPhi().bottomRightCorner(3,3).inverse()); optimizer.addEdge(eBiasg); } // It's actualy a linear estimator, so 1 iteration is enough. //optimizer.setVerbose(true); optimizer.initializeOptimization(); optimizer.optimize(1); g2o::VertexGyrBias * vBgEst = static_cast<g2o::VertexGyrBias*>(optimizer.vertex(0)); return vBgEst->estimate(); }
- VINS中公式如下。使用LDLT分解，解方程组。
void solveGyroscopeBias(map<double, ImageFrame> &all_image_frame, Vector3d* Bgs) { Matrix3d A; Vector3d b; Vector3d delta_bg; A.setZero(); b.setZero(); map<double, ImageFrame>::iterator frame_i; map<double, ImageFrame>::iterator frame_j; for (frame_i = all_image_frame.begin(); next(frame_i) != all_image_frame.end(); frame_i++) { frame_j = next(frame_i); MatrixXd tmp_A(3, 3); tmp_A.setZero(); VectorXd tmp_b(3); tmp_b.setZero(); Eigen::Quaterniond q_ij(frame_i->second.R.transpose() * frame_j->second.R); tmp_A = frame_j->second.pre_integration->jacobian.template block<3, 3>(O_R, O_BG); tmp_b = 2 * (frame_j->second.pre_integration->delta_q.inverse() * q_ij).vec(); A += tmp_A.transpose() * tmp_A; b += tmp_A.transpose() * tmp_b; } delta_bg = A.ldlt().solve(b); ROS_WARN_STREAM("gyroscope bias initial calibration " << delta_bg.transpose()); for (int i = 0; i <= WINDOW_SIZE; i++) Bgs[i] += delta_bg; for (frame_i = all_image_frame.begin(); next(frame_i) != all_image_frame.end( ); frame_i++) { frame_j = next(frame_i); frame_j->second.pre_integration->repropagate(Vector3d::Zero(), Bgs[0]); } }
求重力加速度g、尺度s和外参平移量T
- VINS中并没有求外参T，而是在紧耦合优化时以初值为0直接进行优化。两算法求取公式略有不同。VI ORB-SLAM公式如下，使用SVD分解求解方程的解：
// Solve A*x=B for x=[s,gw] 4x1 vector cv::Mat A = cv::Mat::zeros(3*(N-2),4,CV_32F); cv::Mat B = cv::Mat::zeros(3*(N-2),1,CV_32F); cv::Mat I3 = cv::Mat::eye(3,3,CV_32F); // Step 2. // Approx Scale and Gravity vector in 'world' frame (first KF's camera frame) for(int i=0; i<N-2; i++) { //KeyFrameInit* pKF1 = vKFInit[i];//vScaleGravityKF[i]; KeyFrameInit* pKF2 = vKFInit[i+1]; KeyFrameInit* pKF3 = vKFInit[i+2]; // Delta time between frames double dt12 = pKF2->mIMUPreInt.getDeltaTime(); double dt23 = pKF3->mIMUPreInt.getDeltaTime(); // Pre-integrated measurements cv::Mat dp12 = Converter::toCvMat(pKF2->mIMUPreInt.getDeltaP()); cv::Mat dv12 = Converter::toCvMat(pKF2->mIMUPreInt.getDeltaV()); cv::Mat dp23 = Converter::toCvMat(pKF3->mIMUPreInt.getDeltaP()); // Pose of camera in world frame cv::Mat Twc1 = vTwc[i].clone();//pKF1->GetPoseInverse(); cv::Mat Twc2 = vTwc[i+1].clone();//pKF2->GetPoseInverse(); cv::Mat Twc3 = vTwc[i+2].clone();//pKF3->GetPoseInverse(); // Position of camera center cv::Mat pc1 = Twc1.rowRange(0,3).col(3); cv::Mat pc2 = Twc2.rowRange(0,3).col(3); cv::Mat pc3 = Twc3.rowRange(0,3).col(3); // Rotation of camera, Rwc cv::Mat Rc1 = Twc1.rowRange(0,3).colRange(0,3); cv::Mat Rc2 = Twc2.rowRange(0,3).colRange(0,3); cv::Mat Rc3 = Twc3.rowRange(0,3).colRange(0,3); // Stack to A/B matrix // lambda*s + beta*g = gamma cv::Mat lambda = (pc2-pc1)*dt23 + (pc2-pc3)*dt12; cv::Mat beta = 0.5*I3*(dt12*dt12*dt23 + dt12*dt23*dt23); cv::Mat gamma = (Rc3-Rc2)*pcb*dt12 + (Rc1-Rc2)*pcb*dt23 + Rc1*Rcb*dp12*dt23 - Rc2*Rcb*dp23*dt12 - Rc1*Rcb*dv12*dt12*dt23; lambda.copyTo(A.rowRange(3*i+0,3*i+3).col(0)); beta.copyTo(A.rowRange(3*i+0,3*i+3).colRange(1,4)); gamma.copyTo(B.rowRange(3*i+0,3*i+3)); // Tested the formulation in paper, -gamma. Then the scale and gravity vector is -xx // Debug log //cout<<"iter "<<i<<endl; } // Use svd to compute A*x=B, x=[s,gw] 4x1 vector // A = u*w*vt, u*w*vt*x=B // Then x = vt'*winv*u'*B cv::Mat w,u,vt; // Note w is 4x1 vector by SVDecomp() // A is changed in SVDecomp() with cv::SVD::MODIFY_A for speed cv::SVDecomp(A,w,u,vt,cv::SVD::MODIFY_A); // Debug log //cout<<"u:"<<endl<<u<<endl; //cout<<"vt:"<<endl<<vt<<endl; //cout<<"w:"<<endl<<w<<endl; // Compute winv cv::Mat winv=cv::Mat::eye(4,4,CV_32F); for(int i=0;i<4;i++) { if(fabs(w.at<float>(i))<1e-10) { w.at<float>(i) += 1e-10; // Test log cerr<<"w(i) < 1e-10, w="<<endl<<w<<endl; } winv.at<float>(i,i) = 1./w.at<float>(i); } // Then x = vt'*winv*u'*B cv::Mat x = vt.t()*winv*u.t()*B; // x=[s,gw] 4x1 vector double sstar = x.at<float>(0); // scale should be positive cv::Mat gwstar = x.rowRange(1,4); // gravity should be about ~9.8
- VINS求出尺度s、重力加速度g和速度v(这里求出滑窗内每帧的速度v意义在哪里？)，并没有求外参的平移，方法为LDLT分解。公式如下：
bool LinearAlignment(map<double, ImageFrame> &all_image_frame, Vector3d &g, VectorXd &x) { int all_frame_count = all_image_frame.size(); int n_state = all_frame_count * 3 + 3 + 1; MatrixXd A{n_state, n_state}; A.setZero(); VectorXd b{n_state}; b.setZero(); map<double, ImageFrame>::iterator frame_i; map<double, ImageFrame>::iterator frame_j; int i = 0; for (frame_i = all_image_frame.begin(); next(frame_i) != all_image_frame.end(); frame_i++, i++) { frame_j = next(frame_i); MatrixXd tmp_A(6, 10); tmp_A.setZero(); VectorXd tmp_b(6); tmp_b.setZero(); double dt = frame_j->second.pre_integration->sum_dt; tmp_A.block<3, 3>(0, 0) = -dt * Matrix3d::Identity(); tmp_A.block<3, 3>(0, 6) = frame_i->second.R.transpose() * dt * dt / 2 * Matrix3d::Identity(); tmp_A.block<3, 1>(0, 9) = frame_i->second.R.transpose() * (frame_j->second.T - frame_i->second.T) / 100.0; tmp_b.block<3, 1>(0, 0) = frame_j->second.pre_integration->delta_p + frame_i->second.R.transpose() * frame_j->second.R * TIC[0] - TIC[0]; //cout << "delta_p " << frame_j->second.pre_integration->delta_p.transpose() << endl; tmp_A.block<3, 3>(3, 0) = -Matrix3d::Identity(); tmp_A.block<3, 3>(3, 3) = frame_i->second.R.transpose() * frame_j->second.R; tmp_A.block<3, 3>(3, 6) = frame_i->second.R.transpose() * dt * Matrix3d::Identity(); tmp_b.block<3, 1>(3, 0) = frame_j->second.pre_integration->delta_v; //cout << "delta_v " << frame_j->second.pre_integration->delta_v.transpose() << endl; Matrix<double, 6, 6> cov_inv = Matrix<double, 6, 6>::Zero(); //cov.block<6, 6>(0, 0) = IMU_cov[i + 1]; //MatrixXd cov_inv = cov.inverse(); cov_inv.setIdentity(); MatrixXd r_A = tmp_A.transpose() * cov_inv * tmp_A; VectorXd r_b = tmp_A.transpose() * cov_inv * tmp_b; A.block<6, 6>(i * 3, i * 3) += r_A.topLeftCorner<6, 6>(); b.segment<6>(i * 3) += r_b.head<6>(); A.bottomRightCorner<4, 4>() += r_A.bottomRightCorner<4, 4>(); b.tail<4>() += r_b.tail<4>(); A.block<6, 4>(i * 3, n_state - 4) += r_A.topRightCorner<6, 4>(); A.block<4, 6>(n_state - 4, i * 3) += r_A.bottomLeftCorner<4, 6>(); } A = A * 1000.0; b = b * 1000.0; x = A.ldlt().solve(b); double s = x(n_state - 1) / 100.0; ROS_DEBUG("estimated scale: %f", s); g = x.segment<3>(n_state - 4); ROS_DEBUG_STREAM(" result g " << g.norm() << " " << g.transpose()); if(fabs(g.norm() - G.norm()) > 1.0 || s < 0) { return false; } RefineGravity(all_image_frame, g, x); s = (x.tail<1>())(0) / 100.0; (x.tail<1>())(0) = s; ROS_DEBUG_STREAM(" refine " << g.norm() << " " << g.transpose()); if(s < 0.0 ) return false; else return true; }
这里在求出g之后，还对其进行了优化，方法为LDLT分解，公式如下。
void RefineGravity(map<double, ImageFrame> &all_image_frame, Vector3d &g, VectorXd &x) { Vector3d g0 = g.normalized() * G.norm(); Vector3d lx, ly; //VectorXd x; int all_frame_count = all_image_frame.size(); int n_state = all_frame_count * 3 + 2 + 1; MatrixXd A{n_state, n_state}; A.setZero(); VectorXd b{n_state}; b.setZero(); map<double, ImageFrame>::iterator frame_i; map<double, ImageFrame>::iterator frame_j; for(int k = 0; k < 4; k++) { MatrixXd lxly(3, 2); lxly = TangentBasis(g0); int i = 0; for (frame_i = all_image_frame.begin(); next(frame_i) != all_image_frame.end(); frame_i++, i++) { frame_j = next(frame_i); MatrixXd tmp_A(6, 9); tmp_A.setZero(); VectorXd tmp_b(6); tmp_b.setZero(); double dt = frame_j->second.pre_integration->sum_dt; tmp_A.block<3, 3>(0, 0) = -dt * Matrix3d::Identity(); tmp_A.block<3, 2>(0, 6) = frame_i->second.R.transpose() * dt * dt / 2 * Matrix3d::Identity() * lxly; tmp_A.block<3, 1>(0, 8) = frame_i->second.R.transpose() * (frame_j->second.T - frame_i->second.T) / 100.0; tmp_b.block<3, 1>(0, 0) = frame_j->second.pre_integration->delta_p + frame_i->second.R.transpose() * frame_j->second.R * TIC[0] - TIC[0] - frame_i->second.R.transpose() * dt * dt / 2 * g0; tmp_A.block<3, 3>(3, 0) = -Matrix3d::Identity(); tmp_A.block<3, 3>(3, 3) = frame_i->second.R.transpose() * frame_j->second.R; tmp_A.block<3, 2>(3, 6) = frame_i->second.R.transpose() * dt * Matrix3d::Identity() * lxly; tmp_b.block<3, 1>(3, 0) = frame_j->second.pre_integration->delta_v - frame_i->second.R.transpose() * dt * Matrix3d::Identity() * g0; Matrix<double, 6, 6> cov_inv = Matrix<double, 6, 6>::Zero(); //cov.block<6, 6>(0, 0) = IMU_cov[i + 1]; //MatrixXd cov_inv = cov.inverse(); cov_inv.setIdentity(); MatrixXd r_A = tmp_A.transpose() * cov_inv * tmp_A; VectorXd r_b = tmp_A.transpose() * cov_inv * tmp_b; A.block<6, 6>(i * 3, i * 3) += r_A.topLeftCorner<6, 6>(); b.segment<6>(i * 3) += r_b.head<6>(); A.bottomRightCorner<3, 3>() += r_A.bottomRightCorner<3, 3>(); b.tail<3>() += r_b.tail<3>(); A.block<6, 3>(i * 3, n_state - 3) += r_A.topRightCorner<6, 3>(); A.block<3, 6>(n_state - 3, i * 3) += r_A.bottomLeftCorner<3, 6>(); } A = A * 1000.0; b = b * 1000.0; x = A.ldlt().solve(b); VectorXd dg = x.segment<2>(n_state - 3); g0 = (g0 + lxly * dg).normalized() * G.norm(); //double s = x(n_state - 1); } g = g0; }
求加速度计偏置
- VINS中并没有计算该值，和外参T一样，是在后面直接进行优化。VI ORB-SLAM中则单独对该值进行了求取，求取方式同样为SVD公式如下：
// Step 3. // Use gravity magnitude 9.8 as constraint // gI = [0;0;1], the normalized gravity vector in an inertial frame, NED type with no orientation. cv::Mat gI = cv::Mat::zeros(3,1,CV_32F); gI.at<float>(2) = 1; // Normalized approx. gravity vecotr in world frame cv::Mat gwn = gwstar/cv::norm(gwstar); // Debug log //cout<<"gw normalized: "<<gwn<<endl; // vhat = (gI x gw) / |gI x gw| cv::Mat gIxgwn = gI.cross(gwn); double normgIxgwn = cv::norm(gIxgwn); cv::Mat vhat = gIxgwn/normgIxgwn; double theta = std::atan2(normgIxgwn,gI.dot(gwn)); // Debug log //cout<<"vhat: "<<vhat<<", theta: "<<theta*180.0/M_PI<<endl; Eigen::Vector3d vhateig = Converter::toVector3d(vhat); Eigen::Matrix3d RWIeig = Sophus::SO3::exp(vhateig*theta).matrix(); cv::Mat Rwi = Converter::toCvMat(RWIeig); cv::Mat GI = gI*ConfigParam::GetG();//9.8012; // Solve C*x=D for x=[s,dthetaxy,ba] (1+2+3)x1 vector cv::Mat C = cv::Mat::zeros(3*(N-2),6,CV_32F); cv::Mat D = cv::Mat::zeros(3*(N-2),1,CV_32F); for(int i=0; i<N-2; i++) { //KeyFrameInit* pKF1 = vKFInit[i];//vScaleGravityKF[i]; KeyFrameInit* pKF2 = vKFInit[i+1]; KeyFrameInit* pKF3 = vKFInit[i+2]; // Delta time between frames double dt12 = pKF2->mIMUPreInt.getDeltaTime(); double dt23 = pKF3->mIMUPreInt.getDeltaTime(); // Pre-integrated measurements cv::Mat dp12 = Converter::toCvMat(pKF2->mIMUPreInt.getDeltaP()); cv::Mat dv12 = Converter::toCvMat(pKF2->mIMUPreInt.getDeltaV()); cv::Mat dp23 = Converter::toCvMat(pKF3->mIMUPreInt.getDeltaP()); cv::Mat Jpba12 = Converter::toCvMat(pKF2->mIMUPreInt.getJPBiasa()); cv::Mat Jvba12 = Converter::toCvMat(pKF2->mIMUPreInt.getJVBiasa()); cv::Mat Jpba23 = Converter::toCvMat(pKF3->mIMUPreInt.getJPBiasa()); // Pose of camera in world frame cv::Mat Twc1 = vTwc[i].clone();//pKF1->GetPoseInverse(); cv::Mat Twc2 = vTwc[i+1].clone();//pKF2->GetPoseInverse(); cv::Mat Twc3 = vTwc[i+2].clone();//pKF3->GetPoseInverse(); // Position of camera center cv::Mat pc1 = Twc1.rowRange(0,3).col(3); cv::Mat pc2 = Twc2.rowRange(0,3).col(3); cv::Mat pc3 = Twc3.rowRange(0,3).col(3); // Rotation of camera, Rwc cv::Mat Rc1 = Twc1.rowRange(0,3).colRange(0,3); cv::Mat Rc2 = Twc2.rowRange(0,3).colRange(0,3); cv::Mat Rc3 = Twc3.rowRange(0,3).colRange(0,3); // Stack to C/D matrix // lambda*s + phi*dthetaxy + zeta*ba = psi cv::Mat lambda = (pc2-pc1)*dt23 + (pc2-pc3)*dt12; cv::Mat phi = - 0.5*(dt12*dt12*dt23 + dt12*dt23*dt23)*Rwi*SkewSymmetricMatrix(GI); // note: this has a '-', different to paper cv::Mat zeta = Rc2*Rcb*Jpba23*dt12 + Rc1*Rcb*Jvba12*dt12*dt23 - Rc1*Rcb*Jpba12*dt23; cv::Mat psi = (Rc1-Rc2)*pcb*dt23 + Rc1*Rcb*dp12*dt23 - (Rc2-Rc3)*pcb*dt12 - Rc2*Rcb*dp23*dt12 - Rc1*Rcb*dv12*dt23*dt12 - 0.5*Rwi*GI*(dt12*dt12*dt23 + dt12*dt23*dt23); // note: - paper lambda.copyTo(C.rowRange(3*i+0,3*i+3).col(0)); phi.colRange(0,2).copyTo(C.rowRange(3*i+0,3*i+3).colRange(1,3)); //only the first 2 columns, third term in dtheta is zero, here compute dthetaxy 2x1. zeta.copyTo(C.rowRange(3*i+0,3*i+3).colRange(3,6)); psi.copyTo(D.rowRange(3*i+0,3*i+3)); // Debug log //cout<<"iter "<<i<<endl; } // Use svd to compute C*x=D, x=[s,dthetaxy,ba] 6x1 vector // C = u*w*vt, u*w*vt*x=D // Then x = vt'*winv*u'*D cv::Mat w2,u2,vt2; // Note w2 is 6x1 vector by SVDecomp() // C is changed in SVDecomp() with cv::SVD::MODIFY_A for speed cv::SVDecomp(C,w2,u2,vt2,cv::SVD::MODIFY_A); // Debug log //cout<<"u2:"<<endl<<u2<<endl; //cout<<"vt2:"<<endl<<vt2<<endl; //cout<<"w2:"<<endl<<w2<<endl; // Compute winv cv::Mat w2inv=cv::Mat::eye(6,6,CV_32F); for(int i=0;i<6;i++) { if(fabs(w2.at<float>(i))<1e-10) { w2.at<float>(i) += 1e-10; // Test log cerr<<"w2(i) < 1e-10, w="<<endl<<w2<<endl; } w2inv.at<float>(i,i) = 1./w2.at<float>(i); } // Then y = vt'*winv*u'*D cv::Mat y = vt2.t()*w2inv*u2.t()*D; double s_ = y.at<float>(0); cv::Mat dthetaxy = y.rowRange(1,3); cv::Mat dbiasa_ = y.rowRange(3,6); Vector3d dbiasa_eig = Converter::toVector3d(dbiasa_); // dtheta = [dx;dy;0] cv::Mat dtheta = cv::Mat::zeros(3,1,CV_32F); dthetaxy.copyTo(dtheta.rowRange(0,2)); Eigen::Vector3d dthetaeig = Converter::toVector3d(dtheta); // Rwi_ = Rwi*exp(dtheta) Eigen::Matrix3d Rwieig_ = RWIeig*Sophus::SO3::exp(dthetaeig).matrix(); cv::Mat Rwi_ = Converter::toCvMat(Rwieig_);
272
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
