STM32-HAL 学习-基本定时器-03

1.时钟设置（72Mhz）

2.Basic Timer设置

3.使能定时器中断

4.函数

/* USER CODE BEGIN 0 */
uint32_t Timer = 0;
void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim)
{	
  if(htim->Instance==TIM6)
  {
      Timer++;
  }
}
/* USER CODE END 0 */

/**
  * @brief  The application entry point.
  * @retval int
  */
int main(void)
{
  /* USER CODE BEGIN 1 */
  uint8_t Counter = 0;
  /* USER CODE END 1 */

  /* MCU Configuration--------------------------------------------------------*/

  /* Reset of all peripherals, Initializes the Flash interface and the Systick. */
  HAL_Init();

  /* USER CODE BEGIN Init */

  /* USER CODE END Init */

  /* Configure the system clock */
  SystemClock_Config();

  /* USER CODE BEGIN SysInit */

  /* USER CODE END SysInit */

  /* Initialize all configured peripherals */
  MX_GPIO_Init();
  MX_TIM6_Init();
  /* USER CODE BEGIN 2 */
   HAL_TIM_Base_Start_IT(&htim6);   //开启定时器中断
  /* USER CODE END 2 */

  /* Infinite loop */
  /* USER CODE BEGIN WHILE */
  while (1)
  {
    /* USER CODE END WHILE */

    /* USER CODE BEGIN 3 */
	  if(Timer == 1000)  //1SLED取反
	  {
	     Timer = 0;
		  Counter ++;
		  HAL_GPIO_TogglePin(LED1_GPIO_Port,LED1_Pin);
	  }
	  
	  if(Counter == 20) //20次关掉定时器
	  {
	     Counter = 0;
		 HAL_TIM_Base_Stop_IT(&htim6); //关闭定时器中断
	  }
  }
  /* USER CODE END 3 */
}