pytorch学习笔记：tensorboard使用

0、安装

1、使用方法

当设置log_dir时，comment参数不起作用；当未设置时，会在当前目录创建一个文件夹runs，里面还有一个文件夹以comment为后缀，再进去就是记录的文件，以filename_suffix设置的为后缀。

1.1、记录标量scalar

 

flag = 0
# flag = 1
if flag:

    max_epoch = 100

    writer = SummaryWriter(comment='test_comment', filename_suffix="test_suffix")

    for x in range(max_epoch):

        writer.add_scalar('y=2x', x * 2, x)    #x*2为y轴数据，x为x轴数据
        writer.add_scalar('y=pow_2_x', 2 ** x, x)

        writer.add_scalars('data/scalar_group', {"xsinx": x * np.sin(x),
                                                 "xcosx": x * np.cos(x)}, x)

    writer.close()

 

记录完成后，在终端输入tensorboard --logdir=./ 即可通过浏览器访问记录的数据

1.2、记录直方图histogram

可用于记录参数分布

 

# ----------------------------------- 2 histogram -----------------------------------
# flag = 0
flag = 1
if flag:

    writer = SummaryWriter(comment='test_comment', filename_suffix="test_suffix")

    for x in range(2):

        np.random.seed(x)

        data_union = np.arange(100)
        data_normal = np.random.normal(size=1000)

        writer.add_histogram('distribution union', data_union, x)
        writer.add_histogram('distribution normal', data_normal, x)

        plt.subplot(121).hist(data_union, label="union")
        plt.subplot(122).hist(data_normal, label="normal")
        plt.legend()
        plt.show()

    writer.close()

 

1.3、记录训练loss和accuracy，各网络层参数分布及梯度分布

import os
import numpy as np
import torch
import torch.nn as nn
from torch.utils.data import DataLoader
import torchvision.transforms as transforms
from torch.utils.tensorboard import SummaryWriter
import torch.optim as optim
from matplotlib import pyplot as plt
from model.lenet import LeNet
from tools.my_dataset import RMBDataset
from tools.common_tools import set_seed

set_seed()  # 设置随机种子
rmb_label = {"1": 0, "100": 1}

# 参数设置
MAX_EPOCH = 10
BATCH_SIZE = 16
LR = 0.01
log_interval = 10
val_interval = 1

# ============================ step 1/5 数据 ============================

split_dir = os.path.join("..", "..", "data", "rmb_split")
train_dir = os.path.join(split_dir, "train")
valid_dir = os.path.join(split_dir, "valid")

norm_mean = [0.485, 0.456, 0.406]
norm_std = [0.229, 0.224, 0.225]

train_transform = transforms.Compose([
    transforms.Resize((32, 32)),
    transforms.RandomCrop(32, padding=4),
    transforms.RandomGrayscale(p=0.8),
    transforms.ToTensor(),
    transforms.Normalize(norm_mean, norm_std),
])

valid_transform = transforms.Compose([
    transforms.Resize((32, 32)),
    transforms.ToTensor(),
    transforms.Normalize(norm_mean, norm_std),
])

# 构建MyDataset实例
train_data = RMBDataset(data_dir=train_dir, transform=train_transform)
valid_data = RMBDataset(data_dir=valid_dir, transform=valid_transform)

# 构建DataLoder
train_loader = DataLoader(dataset=train_data, batch_size=BATCH_SIZE, shuffle=True)
valid_loader = DataLoader(dataset=valid_data, batch_size=BATCH_SIZE)

# ============================ step 2/5 模型 ============================

net = LeNet(classes=2)
net.initialize_weights()

# ============================ step 3/5 损失函数 ============================
criterion = nn.CrossEntropyLoss()                                                   # 选择损失函数

# ============================ step 4/5 优化器 ============================
optimizer = optim.SGD(net.parameters(), lr=LR, momentum=0.9)                        # 选择优化器
scheduler = torch.optim.lr_scheduler.StepLR(optimizer, step_size=10, gamma=0.1)     # 设置学习率下降策略

# ============================ step 5/5 训练 ============================
train_curve = list()
valid_curve = list()

iter_count = 0

# 构建 SummaryWriter
writer = SummaryWriter(comment='test_your_comment', filename_suffix="_test_your_filename_suffix")

for epoch in range(MAX_EPOCH):

    loss_mean = 0.
    correct = 0.
    total = 0.

    net.train()
    for i, data in enumerate(train_loader):

        iter_count += 1

        # forward
        inputs, labels = data
        outputs = net(inputs)

        # backward
        optimizer.zero_grad()
        loss = criterion(outputs, labels)
        loss.backward()

        # update weights
        optimizer.step()

        # 统计分类情况
        _, predicted = torch.max(outputs.data, 1)
        total += labels.size(0)
        correct += (predicted == labels).squeeze().sum().numpy()

        # 打印训练信息
        loss_mean += loss.item()
        train_curve.append(loss.item())
        if (i+1) % log_interval == 0:
            loss_mean = loss_mean / log_interval
            print("Training:Epoch[{:0>3}/{:0>3}] Iteration[{:0>3}/{:0>3}] Loss: {:.4f} Acc:{:.2%}".format(
                epoch, MAX_EPOCH, i+1, len(train_loader), loss_mean, correct / total))
            loss_mean = 0.

        # 记录数据，保存于event file
        writer.add_scalars("Loss", {"Train": loss.item()}, iter_count)
        writer.add_scalars("Accuracy", {"Train": correct / total}, iter_count)

    # 每个epoch，记录梯度，权值
    for name, param in net.named_parameters():
        writer.add_histogram(name + '_grad', param.grad, epoch)
        writer.add_histogram(name + '_data', param, epoch)

    scheduler.step()  # 更新学习率

    # validate the model
    if (epoch+1) % val_interval == 0:

        correct_val = 0.
        total_val = 0.
        loss_val = 0.
        net.eval()
        with torch.no_grad():
            for j, data in enumerate(valid_loader):
                inputs, labels = data
                outputs = net(inputs)
                loss = criterion(outputs, labels)

                _, predicted = torch.max(outputs.data, 1)
                total_val += labels.size(0)
                correct_val += (predicted == labels).squeeze().sum().numpy()

                loss_val += loss.item()

            valid_curve.append(loss.item())
            print("Valid:\t Epoch[{:0>3}/{:0>3}] Iteration[{:0>3}/{:0>3}] Loss: {:.4f} Acc:{:.2%}".format(
                epoch, MAX_EPOCH, j+1, len(valid_loader), loss_val, correct / total))

            # 记录数据，保存于event file
            writer.add_scalars("Loss", {"Valid": np.mean(valid_curve)}, iter_count)
            writer.add_scalars("Accuracy", {"Valid": correct / total}, iter_count)

train_x = range(len(train_curve))
train_y = train_curve

train_iters = len(train_loader)
valid_x = np.arange(1, len(valid_curve)+1) * train_iters*val_interval # 由于valid中记录的是epochloss，需要对记录点进行转换到iterations
valid_y = valid_curve

plt.plot(train_x, train_y, label='Train')
plt.plot(valid_x, valid_y, label='Valid')

plt.legend(loc='upper right')
plt.ylabel('loss value')
plt.xlabel('Iteration')
plt.show()

 

在训练模型过程中，可以通过观察模型参数的分布情况，如果分布比较发散，并loss不下降，这时需要找原因。

如果发现前面的网络层梯度很小，考虑是否是梯度消失，此时看网络后面层的梯度，若也很小（不是梯度消失，loss低）但若最后一层的梯度比较大，前面层的梯度逐渐减小，可能就是产生了梯度消失。

 1.4、记录图像并可视化

 

# ----------------------------------- 3 image -----------------------------------
flag = 0
# flag = 1
if flag:

    writer = SummaryWriter(comment='test_your_comment', filename_suffix="_test_your_filename_suffix")

    # img 1     random
    fake_img = torch.randn(3, 512, 512)
    writer.add_image("fake_img", fake_img, 1)
    time.sleep(1)

    # img 2     ones
    fake_img = torch.ones(3, 512, 512)
    time.sleep(1)
    writer.add_image("fake_img", fake_img, 2)

    # img 3     1.1
    fake_img = torch.ones(3, 512, 512) * 1.1
    time.sleep(1)
    writer.add_image("fake_img", fake_img, 3)

    # img 4     HW
    fake_img = torch.rand(512, 512)
    writer.add_image("fake_img", fake_img, 4, dataformats="HW")

    # img 5     HWC
    fake_img = torch.rand(512, 512, 3)
    writer.add_image("fake_img", fake_img, 5, dataformats="HWC")

    writer.close()

 

五张图展示效果如下：

由于第一张图像为3通道并且数据从正态分布中产生，因此为随机的彩色图

 

第二张图像为3通道全1数据，没有大于1的值，因此需要统一乘以255，全255的图像因此为全白色

第三张图像为3通道，并且数据全部为1.1，因此图像为全黑色

 

第四张图像为一通道，因此为黑白图像

与第一张图像基本相同，传入数据格式不同

 

1.5、制作网格图像

flag = 0
# flag = 1
if flag:
    writer = SummaryWriter(comment='test_your_comment', filename_suffix="_test_your_filename_suffix")

    split_dir = os.path.join("..", "..", "data", "rmb_split")
    train_dir = os.path.join(split_dir, "train")
    # train_dir = "path to your training data"

    transform_compose = transforms.Compose([transforms.Resize((32, 64)), transforms.ToTensor()])
    train_data = RMBDataset(data_dir=train_dir, transform=transform_compose)
    train_loader = DataLoader(dataset=train_data, batch_size=16, shuffle=True)
    data_batch, label_batch = next(iter(train_loader))

    img_grid = vutils.make_grid(data_batch, nrow=4, normalize=True, scale_each=True)
    # img_grid = vutils.make_grid(data_batch, nrow=4, normalize=False, scale_each=False)
    writer.add_image("input img", img_grid, 0)

    writer.close()

 

1.6卷积核及特征图可视化

import torch.nn as nn
from PIL import Image
import torchvision.transforms as transforms
from torch.utils.tensorboard import SummaryWriter
import torchvision.utils as vutils
from tools.common_tools import set_seed
import torchvision.models as models

set_seed(1)  # 设置随机种子


# ----------------------------------- kernel visualization -----------------------------------
# flag = 0
flag = 1
if flag:
    writer = SummaryWriter(comment='test_your_comment', filename_suffix="_test_your_filename_suffix")

    alexnet = models.alexnet(pretrained=True)

    kernel_num = -1
    vis_max = 1

    for sub_module in alexnet.modules():
        if isinstance(sub_module, nn.Conv2d):
            kernel_num += 1
            if kernel_num > vis_max:
                break
            kernels = sub_module.weight
            c_out, c_int, k_w, k_h = tuple(kernels.shape)

            for o_idx in range(c_out):
                kernel_idx = kernels[o_idx, :, :, :].unsqueeze(1)   # make_grid需要 BCHW，这里拓展C维度
                kernel_grid = vutils.make_grid(kernel_idx, normalize=True, scale_each=True, nrow=c_int)
                writer.add_image('{}_Convlayer_split_in_channel'.format(kernel_num), kernel_grid, global_step=o_idx)

            kernel_all = kernels.view(-1, 3, k_h, k_w)  # 3, h, w
            kernel_grid = vutils.make_grid(kernel_all, normalize=True, scale_each=True, nrow=8)  # c, h, w
            writer.add_image('{}_all'.format(kernel_num), kernel_grid, global_step=322)

            print("{}_convlayer shape:{}".format(kernel_num, tuple(kernels.shape)))

    writer.close()


# ----------------------------------- feature map visualization -----------------------------------
# flag = 0
flag = 1
if flag:
    writer = SummaryWriter(comment='test_your_comment', filename_suffix="_test_your_filename_suffix")

    # 数据
    path_img = "./lena.png"     # your path to image
    normMean = [0.49139968, 0.48215827, 0.44653124]
    normStd = [0.24703233, 0.24348505, 0.26158768]

    norm_transform = transforms.Normalize(normMean, normStd)
    img_transforms = transforms.Compose([
        transforms.Resize((224, 224)),
        transforms.ToTensor(),
        norm_transform
    ])

    img_pil = Image.open(path_img).convert('RGB')
    if img_transforms is not None:
        img_tensor = img_transforms(img_pil)
    img_tensor.unsqueeze_(0)    # chw --> bchw

    # 模型
    alexnet = models.alexnet(pretrained=True)

    # forward
    convlayer1 = alexnet.features[0]
    fmap_1 = convlayer1(img_tensor)

    # 预处理
    fmap_1.transpose_(0, 1)  # bchw=(1, 64, 55, 55) --> (64, 1, 55, 55)
    fmap_1_grid = vutils.make_grid(fmap_1, normalize=True, scale_each=True, nrow=8)

    writer.add_image('feature map in conv1', fmap_1_grid, global_step=322)
    writer.close()

 

 1.7可视化模型计算图

需要pytorch1.3以上版本

# flag = 0
flag = 1
if flag:

    writer = SummaryWriter(comment='test_your_comment', filename_suffix="_test_your_filename_suffix")

    # 模型
    fake_img = torch.randn(1, 3, 32, 32)

    lenet = LeNet(classes=2)

    writer.add_graph(lenet, fake_img)

    writer.close()

    from torchsummary import summary
    print(summary(lenet, (3, 32, 32), device="cpu"))

 

 

举例：参数量计算

 

本文为深度之眼Pytorch课程的学习笔记，仅供自己学习使用，如有问题欢迎讨论！关于课程可以扫描下图二维码