Xenomai:成功解决Linux找不到/usr/xenomai/bin路径的问题

没有在下载解压之后在相应路径下执行make 和 sudo make install命令。执行完毕编译后就会在Linux的/usr下找到xenomai文件。推荐阅读这篇文章。

(base) warmtree@warmtree-HP-Pavilion-Laptop-15-cc5xx:~/下载/xenomai-3.1$ sudo apt-get install devscripts devscripts debhelper dh-kpatches findutils autotools-dev autoconf automake libtool
[sudo] warmtree 的密码： 
正在读取软件包列表... 完成
正在分析软件包的依赖关系树       
正在读取状态信息... 完成       
没有可用的软件包 devscripts，但是它被其它的软件包引用了。
这可能意味着这个缺失的软件包可能已被废弃，
或者只能在其他发布源中找到

E: 软件包 devscripts 没有可安装候选
E: 软件包 devscripts 没有可安装候选
E: 无法定位软件包 dh-kpatches
(base) warmtree@warmtree-HP-Pavilion-Laptop-15-cc5xx:~/下载/xenomai-3.1$ make
Making all in doc
make[1]: 进入目录“/home/warmtree/下载/xenomai-3.1/doc”
Making all in gitdoc
make[2]: 进入目录“/home/warmtree/下载/xenomai-3.1/doc/gitdoc”
make[2]: 离开目录“/home/warmtree/下载/xenomai-3.1/doc/gitdoc”
Making all in doxygen
make[2]: 进入目录“/home/warmtree/下载/xenomai-3.1/doc/doxygen”
make[2]: 对“all”无需做任何事。
make[2]: 离开目录“/home/warmtree/下载/xenomai-3.1/doc/doxygen”
Making all in asciidoc
make[2]: 进入目录“/home/warmtree/下载/xenomai-3.1/doc/asciidoc”
make[2]: 对“all”无需做任何事。
make[2]: 离开目录“/home/warmtree/下载/xenomai-3.1/doc/asciidoc”
make[2]: 进入目录“/home/warmtree/下载/xenomai-3.1/doc”
make[2]: 对“all-am”无需做任何事。
make[2]: 离开目录“/home/warmtree/下载/xenomai-3.1/doc”
make[1]: 离开目录“/home/warmtree/下载/xenomai-3.1/doc”
Making all in lib
make[1]: 进入目录“/home/warmtree/下载/xenomai-3.1/lib”
Making all in boilerplate
make[2]: 进入目录“/home/warmtree/下载/xenomai-3.1/lib/boilerplate”
make  all-recursive
make[3]: 进入目录“/home/warmtree/下载/xenomai-3.1/lib/boilerplate”
Making all in init
make[4]: 进入目录“/home/warmtree/下载/xenomai-3.1/lib/boilerplate/init”
  CC       libbootstrap_a-bootstrap.o
  AR       libbootstrap.a
ar: `u' 修饰符被忽略，因为 `D' 为默认（参见 `U'）
  CC       libbootstrap_pic_la-bootstrap.lo
  CCLD     libbootstrap-pic.la
ar: `u' modifier ignored since `D' is the default (see `U')
make[4]: 离开目录“/home/warmtree/下载/xenomai-3.1/lib/boilerplate/init”
make[4]: 进入目录“/home/warmtree/下载/xenomai-3.1/lib/boilerplate”
  CC       libavl_la-avl.lo
  CCLD     libavl.la
ar: `u' modifier ignored since `D' is the default (see `U')
  CC       libversion_la-version.lo
  CCLD     libversion.la
ar: `u' modifier ignored since `D' is the default (see `U')
  CC       iniparser/libiniparser_la-dictionary.lo
  CC       iniparser/libiniparser_la-iniparser.lo
  CCLD     libiniparser.la
ar: `u' modifier ignored since `D' is the default (see `U')
  CC       libboilerplate_la-ancillaries.lo
  CC       libboilerplate_la-heapmem.lo
  CC       libboilerplate_la-hash.lo
  CC       libboilerplate_la-setup.lo
  CC       libboilerplate_la-time.lo
  CC       tlsf/libtlsf_la-tlsf.lo
  CCLD     libtlsf.la
ar: `u' modifier ignored since `D' is the default (see `U')
  CCLD     libboilerplate.la
ar: `u' modifier ignored since `D' is the default (see `U')
  CC       version-version.o
  CCLD     version
make[4]: 离开目录“/home/warmtree/下载/xenomai-3.1/lib/boilerplate”
make[3]: 离开目录“/home/warmtree/下载/xenomai-3.1/lib/boilerplate”
make[2]: 离开目录“/home/warmtree/下载/xenomai-3.1/lib/boilerplate”
Making all in cobalt
make[2]: 进入目录“/home/warmtree/下载/xenomai-3.1/lib/cobalt”
Making all in arch
make[3]: 进入目录“/home/warmtree/下载/xenomai-3.1/lib/cobalt/arch”
Making all in x86
make[4]: 进入目录“/home/warmtree/下载/xenomai-3.1/lib/cobalt/arch/x86”
Making all in include
make[5]: 进入目录“/home/warmtree/下载/xenomai-3.1/lib/cobalt/arch/x86/include”
Making all in asm
make[6]: 进入目录“/home/warmtree/下载/xenomai-3.1/lib/cobalt/arch/x86/include/asm”
Making all in xenomai
make[7]: 进入目录“/home/warmtree/下载/xenomai-3.1/lib/cobalt/arch/x86/include/asm/xenomai”
make[7]: 对“all”无需做任何事。
make[7]: 离开目录“/home/warmtree/下载/xenomai-3.1/lib/cobalt/arch/x86/include/asm/xenomai”
make[7]: 进入目录“/home/warmtree/下载/xenomai-3.1/lib/cobalt/arch/x86/include/asm”
make[7]: 对“all-am”无需做任何事。
make[7]: 离开目录“/home/warmtree/下载/xenomai-3.1/lib/cobalt/arch/x86/include/asm”
make[6]: 离开目录“/home/warmtree/下载/xenomai-3.1/lib/cobalt/arch/x86/include/asm”
make[6]: 进入目录“/home/warmtree/下载/xenomai-3.1/lib/cobalt/arch/x86/include”
make[6]: 对“all-am”无需做任何事。
make[6]: 离开目录“/home/warmtree/下载/xenomai-3.1/lib/cobalt/arch/x86/include”
make[5]: 离开目录“/home/warmtree/下载/xenomai-3.1/lib/cobalt/arch/x86/include”
make[5]: 进入目录“/home/warmtree/下载/xenomai-3.1/lib/cobalt/arch/x86”
  CC       libarch_la-features.lo
  CCLD     libarch.la
ar: `u' modifier ignored since `D' is the default (see `U')
make[5]: 离开目录“/home/warmtree/下载/xenomai-3.1/lib/cobalt/arch/x86”
make[4]: 离开目录“/home/warmtree/下载/xenomai-3.1/lib/cobalt/arch/x86”
make[4]: 进入目录“/home/warmtree/下载/xenomai-3.1/lib/cobalt/arch”
make[4]: 对“all-am”无需做任何事。
make[4]: 离开目录“/home/warmtree/下载/xenomai-3.1/lib/cobalt/arch”
make[3]: 离开目录“/home/warmtree/下载/xenomai-3.1/lib/cobalt/arch”
make[3]: 进入目录“/home/warmtree/下载/xenomai-3.1/lib/cobalt”
  CC       libcobalt_la-attr.lo
  CC       libcobalt_la-clock.lo
  CC       libcobalt_la-cond.lo
  CC       libcobalt_la-current.lo
  CC       libcobalt_la-init.lo
  CC       libcobalt_la-internal.lo
  CC       libcobalt_la-mq.lo
  CC       libcobalt_la-mutex.lo
  CC       libcobalt_la-printf.lo
  CC       libcobalt_la-rtdm.lo
  CC       libcobalt_la-sched.lo
  CC       libcobalt_la-select.lo
  CC       libcobalt_la-semaphore.lo
  CC       libcobalt_la-signal.lo
  CC       libcobalt_la-sigshadow.lo
  CC       libcobalt_la-thread.lo
  CC       libcobalt_la-ticks.lo
  CC       libcobalt_la-timer.lo
  CC       libcobalt_la-timerfd.lo
  CC       libcobalt_la-trace.lo
  CC       libcobalt_la-umm.lo
  CC       libcobalt_la-wrappers.lo
  CCLD     libcobalt.la
ar: `u' modifier ignored since `D' is the default (see `U')
  CC       libmodechk_la-malloc.lo
  CC       libmodechk_la-malloc-nowrap.lo
  CCLD     libmodechk.la
ar: `u' modifier ignored since `D' is the default (see `U')
make[3]: 离开目录“/home/warmtree/下载/xenomai-3.1/lib/cobalt”
make[2]: 离开目录“/home/warmtree/下载/xenomai-3.1/lib/cobalt”
Making all in analogy
make[2]: 进入目录“/home/warmtree/下载/xenomai-3.1/lib/analogy”
  CC       libanalogy_la-async.lo
  CC       libanalogy_la-descriptor.lo
  CC       libanalogy_la-info.lo
  CC       libanalogy_la-math.lo
  CC       libanalogy_la-calibration.lo
  CC       libanalogy_la-range.lo
  CC       libanalogy_la-sync.lo
  CC       libanalogy_la-sys.lo
  CCLD     libanalogy.la
ar: `u' modifier ignored since `D' is the default (see `U')
make[2]: 离开目录“/home/warmtree/下载/xenomai-3.1/lib/analogy”
Making all in trank
make[2]: 进入目录“/home/warmtree/下载/xenomai-3.1/lib/trank”
  CC       libtrank_la-init.lo
  CC       libtrank_la-internal.lo
  CC       libtrank_la-posix.lo
  CC       libtrank_la-native.lo
  CCLD     libtrank.la
ar: `u' modifier ignored since `D' is the default (see `U')
make[2]: 离开目录“/home/warmtree/下载/xenomai-3.1/lib/trank”
Making all in copperplate
make[2]: 进入目录“/home/warmtree/下载/xenomai-3.1/lib/copperplate”
Making all in .
make[3]: 进入目录“/home/warmtree/下载/xenomai-3.1/lib/copperplate”
  CC       libcopperplate_la-clockobj.lo
  CC       libcopperplate_la-cluster.lo
  CC       libcopperplate_la-eventobj.lo
  CC       libcopperplate_la-init.lo
  CC       libcopperplate_la-internal.lo
  CC       libcopperplate_la-syncobj.lo
  CC       libcopperplate_la-semobj.lo
  CC       libcopperplate_la-threadobj.lo
  CC       libcopperplate_la-timerobj.lo
  CC       libcopperplate_la-traceobj.lo
  CC       libcopperplate_la-heapobj-heapmem.lo
  CCLD     libcopperplate.la
ar: `u' modifier ignored since `D' is the default (see `U')
make[3]: 离开目录“/home/warmtree/下载/xenomai-3.1/lib/copperplate”
make[2]: 离开目录“/home/warmtree/下载/xenomai-3.1/lib/copperplate”
Making all in smokey
make[2]: 进入目录“/home/warmtree/下载/xenomai-3.1/lib/smokey”
  CC       libsmokey_la-helpers.lo
  CC       libsmokey_la-init.lo
  CCLD     libsmokey.la
ar: `u' modifier ignored since `D' is the default (see `U')
make[2]: 离开目录“/home/warmtree/下载/xenomai-3.1/lib/smokey”
Making all in alchemy
make[2]: 进入目录“/home/warmtree/下载/xenomai-3.1/lib/alchemy”
  CC       libalchemy_la-init.lo
  CC       libalchemy_la-internal.lo
  CC       libalchemy_la-alarm.lo
  CC       libalchemy_la-buffer.lo
  CC       libalchemy_la-cond.lo
  CC       libalchemy_la-event.lo
  CC       libalchemy_la-heap.lo
  CC       libalchemy_la-mutex.lo
  CC       libalchemy_la-queue.lo
  CC       libalchemy_la-task.lo
  CC       libalchemy_la-sem.lo
  CC       libalchemy_la-timer.lo
  CC       libalchemy_la-pipe.lo
  CCLD     libalchemy.la
ar: `u' modifier ignored since `D' is the default (see `U')
make[2]: 离开目录“/home/warmtree/下载/xenomai-3.1/lib/alchemy”
Making all in vxworks
make[2]: 进入目录“/home/warmtree/下载/xenomai-3.1/lib/vxworks”
  CC       libvxworks_la-init.lo
  CC       libvxworks_la-errnoLib.lo
  CC       libvxworks_la-intLib.lo
  CC       libvxworks_la-kernLib.lo
  CC       libvxworks_la-lstLib.lo
  CC       libvxworks_la-memPartLib.lo
  CC       libvxworks_la-msgQLib.lo
  CC       libvxworks_la-rngLib.lo
  CC       libvxworks_la-semLib.lo
  CC       libvxworks_la-taskLib.lo
  CC       libvxworks_la-taskHookLib.lo
  CC       libvxworks_la-taskInfo.lo
  CC       libvxworks_la-tickLib.lo
  CC       libvxworks_la-wdLib.lo
  CC       libvxworks_la-sysLib.lo
  CCLD     libvxworks.la
ar: `u' modifier ignored since `D' is the default (see `U')
make[2]: 离开目录“/home/warmtree/下载/xenomai-3.1/lib/vxworks”
Making all in psos
make[2]: 进入目录“/home/warmtree/下载/xenomai-3.1/lib/psos”
  CC       libpsos_la-init.lo
  CC       libpsos_la-pt.lo
  CC       libpsos_la-queue.lo
  CC       libpsos_la-rn.lo
  CC       libpsos_la-sem.lo
  CC       libpsos_la-task.lo
  CC       libpsos_la-tm.lo
  CCLD     libpsos.la
ar: `u' modifier ignored since `D' is the default (see `U')
make[2]: 离开目录“/home/warmtree/下载/xenomai-3.1/lib/psos”
make[2]: 进入目录“/home/warmtree/下载/xenomai-3.1/lib”
make[2]: 对“all-am”无需做任何事。
make[2]: 离开目录“/home/warmtree/下载/xenomai-3.1/lib”
make[1]: 离开目录“/home/warmtree/下载/xenomai-3.1/lib”
Making all in config
make[1]: 进入目录“/home/warmtree/下载/xenomai-3.1/config”
make[1]: 对“all”无需做任何事。
make[1]: 离开目录“/home/warmtree/下载/xenomai-3.1/config”
Making all in include
make[1]: 进入目录“/home/warmtree/下载/xenomai-3.1/include”
make  all-recursive
make[2]: 进入目录“/home/warmtree/下载/xenomai-3.1/include”
Making all in boilerplate
make[3]: 进入目录“/home/warmtree/下载/xenomai-3.1/include/boilerplate”
make[3]: 对“all”无需做任何事。
make[3]: 离开目录“/home/warmtree/下载/xenomai-3.1/include/boilerplate”
Making all in copperplate
make[3]: 进入目录“/home/warmtree/下载/xenomai-3.1/include/copperplate”
make[3]: 对“all”无需做任何事。
make[3]: 离开目录“/home/warmtree/下载/xenomai-3.1/include/copperplate”
Making all in smokey
make[3]: 进入目录“/home/warmtree/下载/xenomai-3.1/include/smokey”
make[3]: 对“all”无需做任何事。
make[3]: 离开目录“/home/warmtree/下载/xenomai-3.1/include/smokey”
Making all in alchemy
make[3]: 进入目录“/home/warmtree/下载/xenomai-3.1/include/alchemy”
make[3]: 对“all”无需做任何事。
make[3]: 离开目录“/home/warmtree/下载/xenomai-3.1/include/alchemy”
Making all in psos
make[3]: 进入目录“/home/warmtree/下载/xenomai-3.1/include/psos”
make[3]: 对“all”无需做任何事。
make[3]: 离开目录“/home/warmtree/下载/xenomai-3.1/include/psos”
Making all in rtdm
make[3]: 进入目录“/home/warmtree/下载/xenomai-3.1/include/rtdm”
Making all in uapi
make[4]: 进入目录“/home/warmtree/下载/xenomai-3.1/include/rtdm/uapi”
make[4]: 对“all”无需做任何事。
make[4]: 离开目录“/home/warmtree/下载/xenomai-3.1/include/rtdm/uapi”
make[4]: 进入目录“/home/warmtree/下载/xenomai-3.1/include/rtdm”
make[4]: 对“all-am”无需做任何事。
make[4]: 离开目录“/home/warmtree/下载/xenomai-3.1/include/rtdm”
make[3]: 离开目录“/home/warmtree/下载/xenomai-3.1/include/rtdm”
Making all in trank
make[3]: 进入目录“/home/warmtree/下载/xenomai-3.1/include/trank”
Making all in posix
make[4]: 进入目录“/home/warmtree/下载/xenomai-3.1/include/trank/posix”
make[4]: 对“all”无需做任何事。
make[4]: 离开目录“/home/warmtree/下载/xenomai-3.1/include/trank/posix”
Making all in native
make[4]: 进入目录“/home/warmtree/下载/xenomai-3.1/include/trank/native”
make[4]: 对“all”无需做任何事。
make[4]: 离开目录“/home/warmtree/下载/xenomai-3.1/include/trank/native”
Making all in rtdm
make[4]: 进入目录“/home/warmtree/下载/xenomai-3.1/include/trank/rtdm”
make[4]: 对“all”无需做任何事。
make[4]: 离开目录“/home/warmtree/下载/xenomai-3.1/include/trank/rtdm”
make[4]: 进入目录“/home/warmtree/下载/xenomai-3.1/include/trank”
make[4]: 对“all-am”无需做任何事。
make[4]: 离开目录“/home/warmtree/下载/xenomai-3.1/include/trank”
make[3]: 离开目录“/home/warmtree/下载/xenomai-3.1/include/trank”
Making all in vxworks
make[3]: 进入目录“/home/warmtree/下载/xenomai-3.1/include/vxworks”
make[3]: 对“all”无需做任何事。
make[3]: 离开目录“/home/warmtree/下载/xenomai-3.1/include/vxworks”
Making all in xenomai
make[3]: 进入目录“/home/warmtree/下载/xenomai-3.1/include/xenomai”
make[3]: 对“all”无需做任何事。
make[3]: 离开目录“/home/warmtree/下载/xenomai-3.1/include/xenomai”
Making all in cobalt
make[3]: 进入目录“/home/warmtree/下载/xenomai-3.1/include/cobalt”
Making all in boilerplate
make[4]: 进入目录“/home/warmtree/下载/xenomai-3.1/include/cobalt/boilerplate”
make[4]: 对“all”无需做任何事。
make[4]: 离开目录“/home/warmtree/下载/xenomai-3.1/include/cobalt/boilerplate”
Making all in kernel
make[4]: 进入目录“/home/warmtree/下载/xenomai-3.1/include/cobalt/kernel”
Making all in rtdm
make[5]: 进入目录“/home/warmtree/下载/xenomai-3.1/include/cobalt/kernel/rtdm”
Making all in analogy
make[6]: 进入目录“/home/warmtree/下载/xenomai-3.1/include/cobalt/kernel/rtdm/analogy”
make[6]: 对“all”无需做任何事。
make[6]: 离开目录“/home/warmtree/下载/xenomai-3.1/include/cobalt/kernel/rtdm/analogy”
make[6]: 进入目录“/home/warmtree/下载/xenomai-3.1/include/cobalt/kernel/rtdm”
make[6]: 对“all-am”无需做任何事。
make[6]: 离开目录“/home/warmtree/下载/xenomai-3.1/include/cobalt/kernel/rtdm”
make[5]: 离开目录“/home/warmtree/下载/xenomai-3.1/include/cobalt/kernel/rtdm”
make[5]: 进入目录“/home/warmtree/下载/xenomai-3.1/include/cobalt/kernel”
make[5]: 对“all-am”无需做任何事。
make[5]: 离开目录“/home/warmtree/下载/xenomai-3.1/include/cobalt/kernel”
make[4]: 离开目录“/home/warmtree/下载/xenomai-3.1/include/cobalt/kernel”
Making all in sys
make[4]: 进入目录“/home/warmtree/下载/xenomai-3.1/include/cobalt/sys”
make[4]: 对“all”无需做任何事。
make[4]: 离开目录“/home/warmtree/下载/xenomai-3.1/include/cobalt/sys”
Making all in uapi
make[4]: 进入目录“/home/warmtree/下载/xenomai-3.1/include/cobalt/uapi”
Making all in asm-generic
make[5]: 进入目录“/home/warmtree/下载/xenomai-3.1/include/cobalt/uapi/asm-generic”
make[5]: 对“all”无需做任何事。
make[5]: 离开目录“/home/warmtree/下载/xenomai-3.1/include/cobalt/uapi/asm-generic”
Making all in kernel
make[5]: 进入目录“/home/warmtree/下载/xenomai-3.1/include/cobalt/uapi/kernel”
make[5]: 对“all”无需做任何事。
make[5]: 离开目录“/home/warmtree/下载/xenomai-3.1/include/cobalt/uapi/kernel”
make[5]: 进入目录“/home/warmtree/下载/xenomai-3.1/include/cobalt/uapi”
make[5]: 对“all-am”无需做任何事。
make[5]: 离开目录“/home/warmtree/下载/xenomai-3.1/include/cobalt/uapi”
make[4]: 离开目录“/home/warmtree/下载/xenomai-3.1/include/cobalt/uapi”
make[4]: 进入目录“/home/warmtree/下载/xenomai-3.1/include/cobalt”
make[4]: 对“all-am”无需做任何事。
make[4]: 离开目录“/home/warmtree/下载/xenomai-3.1/include/cobalt”
make[3]: 离开目录“/home/warmtree/下载/xenomai-3.1/include/cobalt”
make[3]: 进入目录“/home/warmtree/下载/xenomai-3.1/include”
make[3]: 离开目录“/home/warmtree/下载/xenomai-3.1/include”
make[2]: 离开目录“/home/warmtree/下载/xenomai-3.1/include”
make[1]: 离开目录“/home/warmtree/下载/xenomai-3.1/include”
Making all in scripts
make[1]: 进入目录“/home/warmtree/下载/xenomai-3.1/scripts”
make[1]: 对“all”无需做任何事。
make[1]: 离开目录“/home/warmtree/下载/xenomai-3.1/scripts”
Making all in testsuite
make[1]: 进入目录“/home/warmtree/下载/xenomai-3.1/testsuite”
Making all in latency
make[2]: 进入目录“/home/warmtree/下载/xenomai-3.1/testsuite/latency”
  CC       latency-latency.o
  CCLD     latency
make[2]: 离开目录“/home/warmtree/下载/xenomai-3.1/testsuite/latency”
Making all in smokey
make[2]: 进入目录“/home/warmtree/下载/xenomai-3.1/testsuite/smokey”
Making all in arith
make[3]: 进入目录“/home/warmtree/下载/xenomai-3.1/testsuite/smokey/arith”
  CC       libarith_a-arith.o
  CC       libarith_a-arith-noinline.o
  AR       libarith.a
ar: `u' 修饰符被忽略，因为 `D' 为默认（参见 `U'）
make[3]: 离开目录“/home/warmtree/下载/xenomai-3.1/testsuite/smokey/arith”
Making all in bufp
make[3]: 进入目录“/home/warmtree/下载/xenomai-3.1/testsuite/smokey/bufp”
  CC       libbufp_a-bufp.o
  AR       libbufp.a
ar: `u' 修饰符被忽略，因为 `D' 为默认（参见 `U'）
make[3]: 离开目录“/home/warmtree/下载/xenomai-3.1/testsuite/smokey/bufp”
Making all in cpu-affinity
make[3]: 进入目录“/home/warmtree/下载/xenomai-3.1/testsuite/smokey/cpu-affinity”
  CC       libcpu_affinity_a-cpu-affinity.o
  AR       libcpu-affinity.a
ar: `u' 修饰符被忽略，因为 `D' 为默认（参见 `U'）
make[3]: 离开目录“/home/warmtree/下载/xenomai-3.1/testsuite/smokey/cpu-affinity”
Making all in fpu-stress
make[3]: 进入目录“/home/warmtree/下载/xenomai-3.1/testsuite/smokey/fpu-stress”
  CC       libfpu_stress_a-fpu-stress.o
  AR       libfpu-stress.a
ar: `u' 修饰符被忽略，因为 `D' 为默认（参见 `U'）
make[3]: 离开目录“/home/warmtree/下载/xenomai-3.1/testsuite/smokey/fpu-stress”
Making all in gdb
make[3]: 进入目录“/home/warmtree/下载/xenomai-3.1/testsuite/smokey/gdb”
  CC       libgdb_a-gdb.o
  AR       libgdb.a
ar: `u' 修饰符被忽略，因为 `D' 为默认（参见 `U'）
make[3]: 离开目录“/home/warmtree/下载/xenomai-3.1/testsuite/smokey/gdb”
Making all in iddp
make[3]: 进入目录“/home/warmtree/下载/xenomai-3.1/testsuite/smokey/iddp”
  CC       libiddp_a-iddp.o
  AR       libiddp.a
ar: `u' 修饰符被忽略，因为 `D' 为默认（参见 `U'）
make[3]: 离开目录“/home/warmtree/下载/xenomai-3.1/testsuite/smokey/iddp”
Making all in leaks
make[3]: 进入目录“/home/warmtree/下载/xenomai-3.1/testsuite/smokey/leaks”
  CC       libleaks_a-leaks.o
  AR       libleaks.a
ar: `u' 修饰符被忽略，因为 `D' 为默认（参见 `U'）
make[3]: 离开目录“/home/warmtree/下载/xenomai-3.1/testsuite/smokey/leaks”
Making all in memory-coreheap
make[3]: 进入目录“/home/warmtree/下载/xenomai-3.1/testsuite/smokey/memory-coreheap”
  CC       libmemory_coreheap_a-coreheap.o
  AR       libmemory-coreheap.a
ar: `u' 修饰符被忽略，因为 `D' 为默认（参见 `U'）
make[3]: 离开目录“/home/warmtree/下载/xenomai-3.1/testsuite/smokey/memory-coreheap”
Making all in memory-heapmem
make[3]: 进入目录“/home/warmtree/下载/xenomai-3.1/testsuite/smokey/memory-heapmem”
  CC       libmemory_heapmem_a-heapmem.o
  AR       libmemory-heapmem.a
ar: `u' 修饰符被忽略，因为 `D' 为默认（参见 `U'）
make[3]: 离开目录“/home/warmtree/下载/xenomai-3.1/testsuite/smokey/memory-heapmem”
Making all in memory-tlsf
make[3]: 进入目录“/home/warmtree/下载/xenomai-3.1/testsuite/smokey/memory-tlsf”
  CC       libmemory_tlsf_a-tlsf.o
  AR       libmemory-tlsf.a
ar: `u' 修饰符被忽略，因为 `D' 为默认（参见 `U'）
make[3]: 离开目录“/home/warmtree/下载/xenomai-3.1/testsuite/smokey/memory-tlsf”
Making all in memcheck
make[3]: 进入目录“/home/warmtree/下载/xenomai-3.1/testsuite/smokey/memcheck”
  CC       memcheck.o
  AR       libmemcheck.a
ar: `u' 修饰符被忽略，因为 `D' 为默认（参见 `U'）
make[3]: 离开目录“/home/warmtree/下载/xenomai-3.1/testsuite/smokey/memcheck”
Making all in net_packet_dgram
make[3]: 进入目录“/home/warmtree/下载/xenomai-3.1/testsuite/smokey/net_packet_dgram”
  CC       libnet_packet_dgram_a-packet_dgram.o
  AR       libnet_packet_dgram.a
ar: `u' 修饰符被忽略，因为 `D' 为默认（参见 `U'）
make[3]: 离开目录“/home/warmtree/下载/xenomai-3.1/testsuite/smokey/net_packet_dgram”
Making all in net_packet_raw
make[3]: 进入目录“/home/warmtree/下载/xenomai-3.1/testsuite/smokey/net_packet_raw”
  CC       libnet_packet_raw_a-packet_raw.o
  AR       libnet_packet_raw.a
ar: `u' 修饰符被忽略，因为 `D' 为默认（参见 `U'）
make[3]: 离开目录“/home/warmtree/下载/xenomai-3.1/testsuite/smokey/net_packet_raw”
Making all in net_udp
make[3]: 进入目录“/home/warmtree/下载/xenomai-3.1/testsuite/smokey/net_udp”
  CC       libnet_udp_a-udp.o
  AR       libnet_udp.a
ar: `u' 修饰符被忽略，因为 `D' 为默认（参见 `U'）
make[3]: 离开目录“/home/warmtree/下载/xenomai-3.1/testsuite/smokey/net_udp”
Making all in net_common
make[3]: 进入目录“/home/warmtree/下载/xenomai-3.1/testsuite/smokey/net_common”
  CC       client.o
  CC       server.o
  CC       setup.o
  AR       libnet_common.a
ar: