👨🎓个人主页：研学社的博客
💥💥💞💞欢迎来到本博客❤️❤️💥💥
🏆博主优势：🌞🌞🌞博客内容尽量做到思维缜密，逻辑清晰，为了方便读者。
⛳️座右铭：行百里者，半于九十。
📋📋📋本文目录如下：🎁🎁🎁
目录
💥1 概述
“集成抽水蓄能反渗透系统优化，在反渗透建模中开发替代模型”，集成泵送水力反渗透系统优化在反渗透建模中的代理模型开发，并于多目标遗传算法解决之。
📚2 运行结果
2.1 算例1
2.2 算例2
2.3 算例3
部分代码：
% Analyzing converged results, take 2
% Goes with debugging_pareto_IPHRO_RO_for_paper
%% Loading in results from debugging_pareto_... file
data = xlsread('Opt Results.xlsx');
x_pareto = data(1:70,1:8);
obj_vals = data(1:70,14:16);
results = [x_pareto,obj_vals];
%% Post Processing
E_er_array = obj_vals(:,1);
V_fwRO_array = obj_vals(:,2);
C_array = obj_vals(:,3);
E_r_array = x_pareto(:,1);
gamma_array = x_pareto(:,2);
gamma_RO_array = x_pareto(:,3);
h_L_array = x_pareto(:,4);
N_e1_array = x_pareto(:,5);
N_e2_array = x_pareto(:,6);
N_pv1_array = x_pareto(:,7);
N_pv2_array = x_pareto(:,8);
% Normalizing
E_er_array_normalized = zeros(70,1);
V_fwRO_array_normalized = zeros(70,1);
C_array_normalized = zeros(70,1);
E_r_array_normalized = zeros(70,1);
gamma_array_normalized = zeros(70,1);
gamma_RO_array_normalized = zeros(70,1);
h_L_array_normalized = zeros(70,1);
N_e1_array_normalized = zeros(70,1);
N_e2_array_normalized = zeros(70,1);
N_pv1_array_normalized = zeros(70,1);
N_pv2_array_normalized = zeros(70,1);
for i = 1:70
E_er_array_normalized(i) = (E_er_array(i) - min(E_er_array))/(max(E_er_array)-min(E_er_array));
V_fwRO_array_normalized(i) = (V_fwRO_array(i) - min(V_fwRO_array))/(max(V_fwRO_array)-min(V_fwRO_array));
C_array_normalized(i) = (C_array(i) - min(C_array))/(max(C_array)-min(C_array));
E_r_array_normalized(i) = (E_r_array(i) - min(E_r_array))/(max(E_r_array)-min(E_r_array));
gamma_array_normalized(i) = (gamma_array(i) - min(gamma_array))/(max(gamma_array)-min(gamma_array));
gamma_RO_array_normalized(i) = (gamma_RO_array(i) - min(gamma_RO_array))/(max(gamma_RO_array)-min(gamma_RO_array));
h_L_array_normalized(i) = (h_L_array(i) - min(h_L_array))/(max(h_L_array)-min(h_L_array));
N_e1_array_normalized(i) = (N_e1_array(i) - min(N_e1_array))/(max(N_e1_array)-min(N_e1_array));
N_e2_array_normalized(i) = (N_e2_array(i) - min(N_e2_array))/(max(N_e2_array)-min(N_e2_array));
N_pv1_array_normalized(i) = (N_pv1_array(i) - min(N_pv1_array))/(max(N_pv1_array)-min(N_pv1_array));
N_pv2_array_normalized(i) = (N_pv2_array(i) - min(N_pv2_array))/(max(N_pv2_array)-min(N_pv2_array));
end
% Compiling normalized results
results_norm = [E_r_array_normalized,gamma_array_normalized,...
gamma_RO_array_normalized,h_L_array_normalized,...
N_e1_array_normalized,N_e2_array_normalized,N_pv1_array_normalized,...
N_pv2_array_normalized,E_er_array_normalized,V_fwRO_array_normalized,...
C_array_normalized];
% Finding the best 10% for each objective
[B_E,I_E] = maxk(E_er_array,7);
[B_V,I_V] = maxk(V_fwRO_array,7);
[B_C,I_C] = mink(C_array,7);
bin_best_E = sort(I_E);
bin_best_V = sort(I_V);
bin_best_C = sort(I_C);
bins = ones(70,1);
for i = 1:7
bins(bin_best_E(i)) = 2;
bins(bin_best_V(i)) = 3;
bins(bin_best_C(i)) = 4;
end
% Rearranging rows for Parallel Coordinate Plot
results_par_coor = [results,bins];
results_par_coor = sortrows(results_par_coor,12);
bins_par_coor = results_par_coor(:,12);
results_par_coor = results_par_coor(:,1:11);
%% Filling out the table
[M_max_E,I_max_E] = max(E_er_array);
[M_max_V,I_max_V] = max(V_fwRO_array);
[M_min_C,I_min_C] = min(C_array);
[M_max_E_norm,I_max_E_norm] = max(E_er_array_normalized);
[M_max_V_norm,I_max_V_norm] = max(V_fwRO_array_normalized);
[M_min_C_norm,I_min_C_norm] = min(C_array_normalized);
utopia_point = [M_max_E_norm,M_max_V_norm,M_min_C_norm];
distances = zeros(70,1);
for i = 1:70
pareto_point = [E_er_array_normalized(i),V_fwRO_array_normalized(i),C_array_normalized(i)];
distances(i) = norm(utopia_point - pareto_point);
end
[~,I_best] = min(distances);
%% Running Functions for Constraint Values
% Getting constraint values for all these pareto points
c_collection = zeros(70,11);
%salinity_and_pressure_collection = zeros(70,2);
for i = 1:70
x_individual = x_pareto(i,:);
[c,ceq] = constraints(x_individual);
c_collection(i,:) = c;
%salinity_and_pressure_collection(i,:) = ceq;
end
%% Constraint Analysis
% Making the constraints just variable values
Sht_constraint = c_collection(:,1)+40;
Qf_min_constraint = (c_collection(:,2)-21620)*(-1);
Qf_max_constraint = c_collection(:,3)+98272;
Qc_min_constraint = (c_collection(:,4)-21620)*(-1);
Qc_max_constraint = c_collection(:,5)+98272;
Qp_min_constraint = (c_collection(:,6)-0)*(-1);
Qp_max_constraint = c_collection(:,7)+8369;
rr_min_constraint = (c_collection(:,8)-0)*(-1);
rr_max_constraint = c_collection(:,9)+0.13;
plane_constraint = c_collection(:,11)+1334.934;
constraint_vals = [Sht_constraint,Qf_min_constraint,Qf_max_constraint,...
Qc_min_constraint,Qc_max_constraint,Qp_min_constraint,...
Qp_max_constraint,rr_min_constraint,rr_max_constraint,plane_constraint];
%% Plotting Pareto Front
% % 3D Pareto Front, Scatter
figure(1)
scatter3(E_er_array,V_fwRO_array,C_array,[],'k')
hold on
scatter3(E_er_array(2),V_fwRO_array(2),C_array(2),[],[0.8 0.4 0],'filled')
scatter3(E_er_array(1),V_fwRO_array(1),C_array(1),[],[0.9 0.6 0],'filled')
scatter3(E_er_array(5),V_fwRO_array(5),C_array(5),[],[0.8 0.6 0.7],'filled')
scatter3(E_er_array(48),V_fwRO_array(48),C_array(48),[],[0.95 0.9 0.25],'filled')
xlabel('$\dot{E}_{er}$', 'Interpreter','latex','FontSize',14)
ylabel('$\dot{V}_{fw,RO}$', 'Interpreter','latex','FontSize',14)
zlabel('$C$', 'Interpreter','latex','FontSize',14)
%
% % 2D Pareto Front, Scatter, E and V
figure(2)
scatter(E_er_array,V_fwRO_array,[],[0 0.45 0.7],'LineWidth',2)
hold on
scatter(E_er_array(2),V_fwRO_array(2),[],[0.8 0.4 0],'filled')
scatter(E_er_array(1),V_fwRO_array(1),[],[0.9 0.6 0],'filled')
scatter(E_er_array(5),V_fwRO_array(5),[],[0.8 0.6 0.7],'filled')
scatter(E_er_array(48),V_fwRO_array(48),[],[0.95 0.9 0.25],'filled')
xlabel('$\dot{E}_{er}$', 'Interpreter','latex','FontSize',18)
ylabel('$\dot{V}_{fw,RO}$', 'Interpreter','latex','FontSize',18)
%
% % 2D Pareto Front, Scatter, E and C
figure(3)
scatter(E_er_array,C_array,[],[0 0.45 0.7],'LineWidth',2)
hold on
scatter(E_er_array(2),C_array(2),[],[0.8 0.4 0],'filled')
scatter(E_er_array(1),C_array(1),[],[0.9 0.6 0],'filled')
scatter(E_er_array(5),C_array(5),[],[0.8 0.6 0.7],'filled')
scatter(E_er_array(48),C_array(48),[],[0.95 0.9 0.25],'filled')
xlabel('$\dot{E}_{er}$', 'Interpreter','latex','FontSize',18)
ylabel('$C$', 'Interpreter','latex','FontSize',18)
%
% % 2D Pareto Front, Scatter, V and C
figure(4)
scatter(V_fwRO_array,C_array,[],[0 0.45 0.7],'LineWidth',2)
hold on
scatter(V_fwRO_array(2),C_array(2),[],[0.8 0.4 0],'filled')
scatter(V_fwRO_array(1),C_array(1),[],[0.9 0.6 0],'filled')
scatter(V_fwRO_array(5),C_array(5),[],[0.8 0.6 0.7],'filled')
scatter(V_fwRO_array(48),C_array(48),[],[0.95 0.9 0.25],'filled')
xlabel('$\dot{V}_{fw,RO}$', 'Interpreter','latex','FontSize',18)
ylabel('$C$', 'Interpreter','latex','FontSize',18)
% % Interpolated surface plot for pareto front
% F = scatteredInterpolant(E_er_array,V_fwRO_array,C_array,'natural','none');
% xgr = linspace(min(E_er_array),max(E_er_array));
% ygr = linspace(min(V_fwRO_array),max(V_fwRO_array));
% [XX,YY] = meshgrid(xgr,ygr);
% ZZ = F(XX,YY);
%
figure(5)
surf(XX,YY,ZZ,'LineStyle','none')
hold on
scatter3(E_er_array,V_fwRO_array,C_array,40,'k')
hold on
scatter3(E_er_array(2),V_fwRO_array(2),C_array(2),40,[0.8 0.4 0],'filled')
scatter3(E_er_array(1),V_fwRO_array(1),C_array(1),40,[0.9 0.6 0],'filled')
scatter3(E_er_array(5),V_fwRO_array(5),C_array(5),40,[0.8 0.6 0.7],'filled')
scatter3(E_er_array(48),V_fwRO_array(48),C_array(48),40,[0.95 0.9 0.25],'filled')
xlabel('$\dot{E}_{er}$', 'Interpreter','latex','FontSize',14)
ylabel('$\dot{V}_{fw,RO}$', 'Interpreter','latex','FontSize',14)
zlabel('$C$', 'Interpreter','latex','FontSize',14)
hleg = legend('$Pareto \: Surface$','$Pareto \: Points$','$max(\dot{E}_{er})$','$max(\dot{V}_{fw,RO})$','$min(C)$','$rel. \: max(J)$');
set(hleg, 'Interpreter', 'latex');
hleg.FontSize = 14;
%
% view(30,30)
%
% Parallel Coordinate Plot
figure(6)
p = parallelplot(results_par_coor);
p.CoordinateTickLabels = ["DVar1";"DVar2";"DVar3";"DVar4";"DVar5";"DVar6";"DVar7";"DVar8";"Obj1";"Obj2";"Obj3"];
p.Jitter = 0;
p.GroupData = bins_par_coor;
p.LegendVisible = 0;
%% Functions
% Objective Function
function J = objective(x)
% General Parameters
g = 9.81; % gravitational acceleration [m/s^2]
rho_sw = 1023.6; % generic density of saltwater at 1 atm and 25 degrees celsius [kg/m^3]
rho_fw = 996.9; % generic density of freshwater at 1 atm and 25 degrees celsius [kg/m^3]
eta_hp = 0.894; % pump-side efficiency
eta_ht = 0.894; % pump-side efficiency [-]
T = 25.0; % temperature [degrees celsius]
S_sw = 35.0; % generic seawater salinity [g salt/kg seawater]
M_salt = 58.44; % molar mass of NaCl [g/mol]
P_p = 14.696; % permeate pressure, atmospheric for now [psi]
R = 8.3145; % universal gas constant [J/(mol*K)]
MW_salt_avg = 30.548; % average molar mass of NaCl [g/mol]
Am = 440; % membrane surface area [ft^2]
M_cost_e1 = 1.7; % Proxy for membrane cost of 1st element in RO unit [$/unit]
M_cost_e2 = 1; % Proxy for membrane cost of other elements in RO unit [$/unit]
% Unpack x
E_r = x(1); gamma = x(2); gamma_RO = x(3); h = x(4);
N_e1 = x(5); N_e2 = x(6); N_pv1 = x(7); N_pv2 = x(8);
% Go through the modules
[E_rp,E_rd] = initial_energy_division(E_r,gamma);
V_wp = pump(E_rp,h,eta_hp,rho_sw,g);
[V_wRO, V_swht, Q_f] = mountaintop_reservoir(V_wp,gamma_RO,N_pv1);
[V_fwRO,V_oRO,S_oRO,rho_oRO,eta_ROio,eta_RO,rr_max,rr_min,Q_f_max,Q_f_min,Q_c_max,Q_c_min,Q_p_max,Q_p_min,LHS_SVM] = ro_system(h,Q_f,N_e1,N_e2,N_pv1,N_pv2,rho_sw,rho_fw,T,S_sw,M_salt,P_p,R,MW_salt_avg,Am);
E_swht = turbine(V_swht,h,rho_sw,g,eta_ht);
E_htRO = energy_recapture(V_oRO,h,eta_ROio,rho_oRO,g,eta_ht);
%[rho_ht,S_ht,V_ht] = mixing(V_oRO,V_swht,rho_oRO,S_oRO,gamma_RO,eta_RO,rho_sw,S_sw);
E_er = energy_summation(E_rd,E_swht,E_htRO);
C = RO_cost(N_e1,N_e2,N_pv1,N_pv2,M_cost_e1,M_cost_e2);
E_er_min = -E_er; % maximizing
V_fwRO_min = -V_fwRO; % maximizing
C_min = C; % minimizing
% Compiling
J = [E_er_min,V_fwRO_min,C_min];
end
% Constraint Function
function [c,ceq] = constraints(x)
% General Parameters
g = 9.81; % gravitational acceleration [m/s^2]
rho_sw = 1023.6; % generic density of saltwater at 1 atm and 25 degrees celsius [kg/m^3]
rho_fw = 996.9; % generic density of freshwater at 1 atm and 25 degrees celsius [kg/m^3]
eta_hp = 0.894; % pump-side efficiency
eta_ht = 0.894; % pump-side efficiency [-]
T = 25.0; % temperature [degrees celsius]
S_sw = 35.0; % generic seawater salinity [g salt/kg seawater]
M_salt = 58.44; % molar mass of NaCl [g/mol]
P_p = 14.696; % permeate pressure, atmospheric for now [psi]
R = 8.3145; % universal gas constant [J/(mol*K)]
MW_salt_avg = 30.548; % average molar mass of NaCl [g/mol]
Am = 440; % membrane surface area [ft^2]
M_cost_e1 = 1.7; % Proxy for membrane cost of 1st element in RO unit [$/unit]
M_cost_e2 = 1; % Proxy for membrane cost of other elements in RO unit [$/unit]
% Unpack x
E_r = x(1); gamma = x(2); gamma_RO = x(3); h = x(4);
N_e1 = x(5); N_e2 = x(6); N_pv1 = x(7); N_pv2 = x(8);
% Go through the modules
[E_rp,E_rd] = initial_energy_division(E_r,gamma);
V_wp = pump(E_rp,h,eta_hp,rho_sw,g);
[V_wRO, V_swht, Q_f] = mountaintop_reservoir(V_wp,gamma_RO,N_pv1);
[V_fwRO,V_oRO,S_oRO,rho_oRO,eta_ROio,eta_RO,rr_max,rr_min,Q_f_max,Q_f_min,Q_c_max,Q_c_min,Q_p_max,Q_p_min,LHS_SVM] = ro_system(h,Q_f,N_e1,N_e2,N_pv1,N_pv2,rho_sw,rho_fw,T,S_sw,M_salt,P_p,R,MW_salt_avg,Am);
E_swht = turbine(V_swht,h,rho_sw,g,eta_ht);
E_htRO = energy_recapture(V_oRO,h,eta_ROio,rho_oRO,g,eta_ht);
[rho_ht,S_ht,V_ht] = mixing(V_oRO,V_swht,rho_oRO,S_oRO,gamma_RO,eta_RO,rho_sw,S_sw);
% Salinity constraint
S_ht_con = S_ht-40;
% Feed flow rate to pressure vessel constraint
Q_f_min_con = 21620-Q_f_min;
Q_f_max_con = Q_f_max-98272;
% Concentrate flow rate constraint
Q_c_min_con = 21620-Q_c_min;
Q_c_max_con = Q_c_max-98272;
% Permeate flow rate constraint
Q_p_min_con = -Q_p_min;
Q_p_max_con = Q_p_max-8369;
% Recovery rate for element constraints
rr_min_con = -rr_min;
rr_max_con = rr_max-0.13;
% If N_e2 = 0, then N_pv2 = 0
e2_pv2_con = abs(min([N_e2,1]) - min([N_pv2,1]));
% Equation for SVM plane
SVM_con = LHS_SVM;
% Compiling
c = [S_ht_con;Q_f_min_con;Q_f_max_con;Q_c_min_con;Q_c_max_con;Q_p_min_con;Q_p_max_con;rr_min_con;rr_max_con;e2_pv2_con;SVM_con];
ceq = [];
end
% Modules
function [E_rp,E_rd] = initial_energy_division(E_r,gamma)
E_rp = gamma*E_r; % kWh
E_rd = (1-gamma)*E_r; % kWh
end
function V_wp = pump(E_rp,h,eta_hp,rho_sw,g)
E_rp = E_rp*(3.6*10^6); % joules (from kWh)
V_wp = E_rp*eta_hp/(rho_sw*g*h); % m^3
end
function [V_wRO,V_swht,Q_f] = mountaintop_reservoir(V_wp,gamma_RO,N_pv1)
V_wRO = gamma_RO*V_wp; % m^3
V_swht = (1-gamma_RO)*V_wp; % m^3
Q_f = (V_wRO*264.172)/N_pv1; % gpd (from m^3/day)
end
function [V_fwRO,V_oRO,S_oRO,rho_oRO,eta_ROio,eta_RO,rr_max,rr_min,Q_f_max,Q_f_min,Q_c_max,Q_c_min,Q_p_max,Q_p_min,LHS_SVM] = ro_system(h,Q_f_input,N_e1,N_e2,N_pv1,N_pv2,rho_sw,rho_fw,T,S_sw,M_salt,P_p,R,MW_salt_avg,Am)
% Initialize oopsies relative to Q_f_input
if Q_f_input <= 98272 && Q_f_input >= 21620
oopsies = 0;
oopsies1 = 0;
oopsies2 = 0;
else
oopsies = 1;
oopsies1 = 1;
oopsies2 = 1;
end
% Collection Lists
Q_p_collection = []; % gpd
P_c_collection = []; % psi
c_c_collection = []; % mol/L
Q_c_collection = []; % gpd
rr_collection = []; % -
P_f_collection = []; % psi
S_f_collection = []; % g/kg
Q_f_collection = []; % gpd
% Initialize 1st stage element counter
i1 = 1;
% First stage
while i1 <= N_e1 && oopsies ~= 1
% Beginning with feed conditions into an element
if i1 == 1
% First element
P_f = 1.4228424*h*(rho_sw/rho_fw); % psi
c_f = (S_sw*rho_sw)/(1000*M_salt); % mol/L
Q_f = Q_f_input;
else
% Feed conditions from previous element
P_f = P_c_collection(i1-1); % psi
Q_f = Q_c_collection(i1-1); % gpd
c_f = c_c_collection(i1-1); % mol/L
end
pi_f = 1.12*(273+T)*2*c_f;
S_f = salinity_from_osmotic(pi_f,rho_fw,T,R,MW_salt_avg);
P_f_collection = [P_f_collection;P_f];
S_f_collection = [S_f_collection;S_f];
Q_f_collection = [Q_f_collection;Q_f];
% Solving for Q_p and other numeric values %%%%%%%%%%%%%%%%%%%%%%%
[Q_p_num,P_c_num,c_c_num,Q_c_num,rr_num,oopsies1] = symbolic_Q_p_stuff(c_f,T,Q_f,Am,P_f,P_p);
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
if oopsies1 == 1
i1 = N_e1 + 1;
oopsies2 = 1;
else
% Storing element outputs for further calculations
Q_p_collection = [Q_p_collection;Q_p_num]; % gpd
P_c_collection = [P_c_collection;P_c_num]; % psi
c_c_collection = [c_c_collection;c_c_num]; % mol/L
Q_c_collection = [Q_c_collection;Q_c_num]; % gpd
rr_collection = [rr_collection;rr_num]; % -
% Increasing counter
i1 = i1 + 1;
end
end
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% Set up storage variables
Q_p_collection2 = []; % gpd
P_c_collection2 = []; % psi
c_c_collection2 = []; % mol/L
Q_c_collection2 = []; % gpd
rr_collection2 = []; % -
P_f_collection2 = []; % psi
S_f_collection2 = []; % g/kg
Q_f_collection2 = []; % gpd
% Second stage
if N_e2 == 0 || N_pv2 == 0 || oopsies == 1 || oopsies1 == 1
i2 = N_e2+1;
else
% initialize second stage element counter
i2 = 1;
end
while i2 <= N_e2
if i2 == 1
% Feed conditions from previous stage (feed flowrate reconfigured)
P_f = P_c_collection(end); % psi
c_f = c_c_collection(end); % mol/L
V_intermediate = Q_c_collection(end)*N_pv1; % gpd
Q_f = V_intermediate/N_pv2; % gpd
else
% Feed conditions from previous element
P_f = P_c_collection2(end); % psi
Q_f = Q_c_collection2(end); % gpd
c_f = c_c_collection2(end); % mol/L
end
pi_f = 1.12*(273+T)*2*c_f;
S_f = salinity_from_osmotic(pi_f,rho_fw,T,R,MW_salt_avg);
P_f_collection = [P_f_collection;P_f];
S_f_collection = [S_f_collection;S_f];
Q_f_collection = [Q_f_collection;Q_f];
% Solving for Q_p and other numeric values %%%%%%%%%%%%%%%%%%%%%%%
[Q_p_num,P_c_num,c_c_num,Q_c_num,rr_num,oopsies2] = symbolic_Q_p_stuff(c_f,T,Q_f,Am,P_f,P_p);
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
if oopsies2 == 1
i2 = N_e2 + 1;
else
% Storing element outputs for further calculations
Q_p_collection2 = [Q_p_collection2;Q_p_num]; % gpd
P_c_collection2 = [P_c_collection2;P_c_num]; % psi
c_c_collection2 = [c_c_collection2;c_c_num]; % mol/L
Q_c_collection2 = [Q_c_collection2;Q_c_num]; % gpd
rr_collection2 = [rr_collection2;rr_num]; % -
% Increasing counter
i2 = i2 + 1;
end
end
if oopsies == 1 || oopsies1 == 1 || oopsies2 == 1
% Dependent vars
V_fwRO = 0; V_oRO = 0; S_oRO = 1e5; rho_oRO = 1e5; eta_ROio = 0; eta_RO = 0;
% Constraint vars
rr_max = 1e6; rr_min = -1e6; Q_f_max = 1e6; Q_f_min = -1e6;
Q_c_max = 1e6; Q_c_min = -1e6; Q_p_max = 1e6; Q_p_min = -1e6;
LHS_SVM = 1e6;
else
% Processing for RO System Output Values
V_fwRO = N_pv1*(sum(Q_p_collection)/264.172) + N_pv2*(sum(Q_p_collection2)/264.172); % m^3/day
brine_collective = [Q_c_collection;Q_c_collection2];
pressure_vessel_collective = [N_pv1;N_pv2];
V_oRO = (brine_collective(end)/264.172)*pressure_vessel_collective(end); % m^3/day (from gpd)
c_c_collective = [c_c_collection;c_c_collection2];
pi_c = 1.12*(273+T)*2*c_c_collective(end); % psi
S_oRO = salinity_from_osmotic(pi_c,rho_fw,T,R,MW_salt_avg); % g/kg
P_c_collective = [P_c_collection;P_c_collection2];
rho_oRO = density_from_salinity(S_oRO,P_c_collective(end),rho_fw,T,P_p); % kg/m^3
🎉3 参考文献
部分理论来源于网络，如有侵权请联系删除。
扫一扫
524
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
