复现BEVDet

问题1

创建环境时安装mmcv-full==1.3.13一直报错，可以先安装这个mmcv-full==1.3.13再安装pytorch；

问题2

ERROR: Exception:
Traceback (most recent call last):
  File "/home/wxq/anaconda3/envs/devd/lib/python3.8/site-packages/pip/_internal/cli/base_command.py", line 160, in exc_logging_wrapper
    status = run_func(*args)
  File "/home/wxq/anaconda3/envs/devd/lib/python3.8/site-packages/pip/_internal/cli/req_command.py", line 247, in wrapper
    return func(self, options, args)
  File "/home/wxq/anaconda3/envs/devd/lib/python3.8/site-packages/pip/_internal/commands/install.py", line 494, in run
    installed = install_given_reqs(
  File "/home/wxq/anaconda3/envs/devd/lib/python3.8/site-packages/pip/_internal/req/__init__.py", line 73, in install_given_reqs
    requirement.install(
  File "/home/wxq/anaconda3/envs/devd/lib/python3.8/site-packages/pip/_internal/req/req_install.py", line 792, in install
    install_wheel(
  File "/home/wxq/anaconda3/envs/devd/lib/python3.8/site-packages/pip/_internal/operations/install/wheel.py", line 729, in install_wheel
    _install_wheel(
  File "/home/wxq/anaconda3/envs/devd/lib/python3.8/site-packages/pip/_internal/operations/install/wheel.py", line 589, in _install_wheel
    file.save()
  File "/home/wxq/anaconda3/envs/devd/lib/python3.8/site-packages/pip/_internal/operations/install/wheel.py", line 388, in save
    shutil.copyfileobj(f, dest)
  File "/home/wxq/anaconda3/envs/devd/lib/python3.8/shutil.py", line 202, in copyfileobj
    buf = fsrc_read(length)
  File "/home/wxq/anaconda3/envs/devd/lib/python3.8/zipfile.py", line 907, in read
    data = self._read1(n)
  File "/home/wxq/anaconda3/envs/devd/lib/python3.8/zipfile.py", line 983, in _read1
    data = self._decompressor.decompress(data, n)
zlib.error: Error -3 while decompressing data: invalid distance too far back

安装后续包报错如下，需要自己先安装pillow

conda install Pillow 

问题3

安装后续所有需求包，报错：

    /home/wxq/anaconda3/envs/devd/lib/python3.8/site-packages/setuptools/command/easy_install.py:144: EasyInstallDeprecationWarning: easy_install command is deprecated. Use build and pip and other standards-based tools.
      warnings.warn(
    /home/wxq/anaconda3/envs/devd/lib/python3.8/site-packages/setuptools/command/install.py:34: SetuptoolsDeprecationWarning: setup.py install is deprecated. Use build and pip and other standards-based tools.
      warnings.warn(
    /home/wxq/anaconda3/envs/devd/lib/python3.8/site-packages/torch/utils/cpp_extension.py:387: UserWarning: Attempted to use ninja as the BuildExtension backend but we could not find ninja.. Falling back to using the slow distutils backend.
      warnings.warn(msg.format('we could not find ninja.'))
    warning: no files found matching '*.cpp' under directory 'mmdet3d/.mim/ops'
    warning: no files found matching '*.cu' under directory 'mmdet3d/.mim/ops'
    warning: no files found matching '*.h' under directory 'mmdet3d/.mim/ops'
    warning: no files found matching '*.cc' under directory 'mmdet3d/.mim/ops'
    adding license file 'LICENSE'
    writing manifest file 'mmdet3d.egg-info/SOURCES.txt'
    running build_ext
    error: [Errno 2] No such file or directory: '/usr/local/cuda/bin/nvcc'
    error: subprocess-exited-with-error
    
    × python setup.py develop did not run successfully.
    │ exit code: 1
    ╰─> See above for output.
    
    note: This error originates from a subprocess, and is likely not a problem with pip.
    full command: /home/wxq/anaconda3/envs/devd/bin/python3.8 -c '
    exec(compile('"'"''"'"''"'"'
    # This is <pip-setuptools-caller> -- a caller that pip uses to run setup.py
    #
    # - It imports setuptools before invoking setup.py, to enable projects that directly
    #   import from `distutils.core` to work with newer packaging standards.
    # - It provides a clear error message when setuptools is not installed.
    # - It sets `sys.argv[0]` to the underlying `setup.py`, when invoking `setup.py` so
    #   setuptools doesn'"'"'t think the script is `-c`. This avoids the following warning:
    #     manifest_maker: standard file '"'"'-c'"'"' not found".
    # - It generates a shim setup.py, for handling setup.cfg-only projects.
    import os, sys, tokenize
    
    try:
        import setuptools
    except ImportError as error:
        print(
            "ERROR: Can not execute `setup.py` since setuptools is not available in "
            "the build environment.",
            file=sys.stderr,
        )
        sys.exit(1)
    
    __file__ = %r
    sys.argv[0] = __file__
    
    if os.path.exists(__file__):
        filename = __file__
        with tokenize.open(__file__) as f:
            setup_py_code = f.read()
    else:
        filename = "<auto-generated setuptools caller>"
        setup_py_code = "from setuptools import setup; setup()"
    
    exec(compile(setup_py_code, filename, "exec"))
    '"'"''"'"''"'"' % ('"'"'/home/wxq/BEVDet/setup.py'"'"',), "<pip-setuptools-caller>", "exec"))' develop --no-deps
    cwd: /home/wxq/BEVDet/
error: subprocess-exited-with-error

× python setup.py develop did not run successfully.
│ exit code: 1
╰─> See above for output.

note: This error originates from a subprocess, and is likely not a problem with pip.

修改

修改.bashrc文件

sudo gedit ~/.bashrc

将原有CUDA的环境文件修改

   

原来的：
    export CUDA_HOME=/usr/local/cuda/bin
     
    修改后：
    export CUDA_HOME=/usr/local/cuda-11.3
    (上面的看一下自己的路径，自己的cuda是啥，就写cuda-xxxx)

记得source一下，使环境文件生效

source ~/.bashrc

问题4继续报错

    cc1plus: warning: command line option ‘-Wstrict-prototypes’ is valid for C/ObjC but not for C++
    mmdet3d/ops/ball_query/src/ball_query.cpp:4:10: fatal error: THC/THC.h: 没有那个文件或目录
     #include <THC/THC.h>
              ^~~~~~~~~~~
    compilation terminated.
    error: command '/usr/bin/gcc' failed with exit code 1
    error: subprocess-exited-with-error
    
    × python setup.py develop did not run successfully.
    │ exit code: 1
    ╰─> See above for output.
    
    note: This error originates from a subprocess, and is likely not a problem with pip.
    full command: /home/wxq/anaconda3/envs/devd/bin/python3.8 -c '
    exec(compile('"'"''"'"''"'"'
    # This is <pip-setuptools-caller> -- a caller that pip uses to run setup.py
    #
    # - It imports setuptools before invoking setup.py, to enable projects that directly
    #   import from `distutils.core` to work with newer packaging standards.
    # - It provides a clear error message when setuptools is not installed.
    # - It sets `sys.argv[0]` to the underlying `setup.py`, when invoking `setup.py` so
    #   setuptools doesn'"'"'t think the script is `-c`. This avoids the following warning:
    #     manifest_maker: standard file '"'"'-c'"'"' not found".
    # - It generates a shim setup.py, for handling setup.cfg-only projects.
    import os, sys, tokenize
    
    try:
        import setuptools
    except ImportError as error:
        print(
            "ERROR: Can not execute `setup.py` since setuptools is not available in "
            "the build environment.",
            file=sys.stderr,
        )
        sys.exit(1)
    
    __file__ = %r
    sys.argv[0] = __file__
    
    if os.path.exists(__file__):
        filename = __file__
        with tokenize.open(__file__) as f:
            setup_py_code = f.read()
    else:
        filename = "<auto-generated setuptools caller>"
        setup_py_code = "from setuptools import setup; setup()"
    
    exec(compile(setup_py_code, filename, "exec"))
    '"'"''"'"''"'"' % ('"'"'/home/wxq/BEVDet/setup.py'"'"',), "<pip-setuptools-caller>", "exec"))' develop --no-deps
    cwd: /home/wxq/BEVDet/
error: subprocess-exited-with-error

× python setup.py develop did not run successfully.
│ exit code: 1
╰─> See above for output.

note: This error originates from a subprocess, and is likely not a problem with pip.

解决方法（PointTransformer编译pointops_cuda报错fatal error: THC/THC.h: No such file or directory_3D_DLW的博客-CSDN博客）
原因是pytorch 1.9之后的某个版本删除了THC.h, 参考 fatal error: THC/THC.h: No such file or directory - CSDN。

我使用的是下述方法：
Ctrl+Shift+F全局搜索并删除每一行#include <THC/THC.h>

繼續問題：

ImportError: cannot import name ‘ball_query_ext’ from ‘mmdet3d.ops.ball_query’ (/opt/sdatmp/lq/project/gitproject/mmdetection3d/mmdet3d/ops/ball_query/init.py)
感觉是编译的时候，目录应该多一级/src/：
warning: no files found matching ‘mmdet3d/ops//*.cpp’
warning: no files found matching 'mmdet3d/ops//.cu’
warning: no files found matching 'mmdet3d/ops/**/.h’
warning: no files found matching ‘mmdet3d/ops/**/*.cc’
warning: no files found matching ‘mmdet3d/VERSION’

知乎大佬说g++也要5.4

sudo apt install gcc-5 g++-5
#查看路径下是否存在多版本的gcc/g++
ls /usr/bin/gcc*
ls /usr/bin/g++*
#指定软连接gcc-5和g+±5
sudo update-alternatives --install /usr/bin/gcc gcc /usr/bin/gcc-5 80 --slave /usr/bin/g++ g++ /usr/bin/g++-5
最后测试一下，分别都是对应版本5.5.0
gcc -v
g++ -v

终于successful了，喜极而泣！！！

    Installed /home/wxq/BEVDet-dev2.0
Successfully installed llvmlite-0.36.0 mmdet3d-1.0.0rc4 numba-0.53.0