💥💥💞💞欢迎来到本博客❤️❤️💥💥
🏆博主优势:🌞🌞🌞博客内容尽量做到思维缜密,逻辑清晰,为了方便读者。
⛳️座右铭:行百里者,半于九十。
📋📋📋本文目录如下:🎁🎁🎁
目录
💥1 概述
基于LEACH的无线传感器网络路由协议仿真
这个MATLAB程序模拟了基于LEACH的无线传感器网络路由协议的性能。该仿真包括随机网络生成,并允许对不同协议进行比较。
介绍
无线传感器网络(WSNs)在环境监测、监控和医疗等各种应用中起着至关重要的作用。LEACH(低能耗自适应聚类层次)是一种为WSNs设计的流行路由协议。该仿真程序旨在比较不同基于LEACH的路由协议,并使用随机网络生成方法评估它们的性能。
脚本列表如下:
CalcDistance.m:计算节点之间的距离。
CreateModel.m:创建网络模型。
CreateNetwork.m:生成随机网络。
DeadCounter.m:跟踪网络中的死节点。
Direct_Protocol.m:实现直接通信协议。
Direct_UsedEnergy.m:计算直接通信协议的能量消耗。
Leach.m:执行基于LEACH的路由协议。
Leach_Protocol.m:实现LEACH协议。
Leach_SelectCluster.m:在LEACH协议中选择簇头。
Leach_UsedEnergy.m:计算LEACH协议的能量消耗。
Main.m:编排仿真的主脚本。
Show.m:显示仿真结果。
ShowNetworks.m:可视化生成的网络。
Test.m:运行仿真并比较协议。
运行Main.m文件以开始仿真。
按照屏幕上的说明配置仿真参数。
仿真完成后,结果将显示或保存到文件中。
结果
仿真完成后,结果将显示或保存到文件中,具体取决于配置。结果可能包括网络寿命、能量消耗、数据包传输比例和网络覆盖等指标。这些指标可用于比较不同基于LEACH的路由协议的性能。
📚2 运行结果
部分代码:
%Field Dimensions - x and y maximum (in meters)
xm=100;
ym=100;
%x and y Coordinates of the Sink
sink.x=0.5*xm;
sink.y=0.5*ym;
%Number of Nodes in the field
n=100
%Optimal Election Probability of a node
%to become cluster head
p=0.1;
%Energy Model (all values in Joules)
%Initial Energy
Eo=0.5;
%Eelec=Etx=Erx
ETX=50*0.000000001;
ERX=50*0.000000001;
%Transmit Amplifier types
Efs=10*0.000000000001;
Emp=0.0013*0.000000000001;
%Data Aggregation Energy
EDA=5*0.000000001;
%Values for Hetereogeneity
%Percentage of nodes than are advanced
m=0.1;
%\alpha
a=1;
%maximum number of rounds
rmax=9999
%%%%%%%%%%%%%%%%%%%%%%%%% END OF PARAMETERS %%%%%%%%%%%%%%%%%%%%%%%%
%Computation of do
do=sqrt(Efs/Emp);
%Creation of the random Sensor Network
figure(1);
for i=1:1:n
S(i).xd=rand(1,1)*xm;
XR(i)=S(i).xd;
S(i).yd=rand(1,1)*ym;
YR(i)=S(i).yd;
S(i).G=0;
%initially there are no cluster heads only nodes
S(i).type='N';
temp_rnd0=i;
%Random Election of Normal Nodes
if (temp_rnd0>=m*n+1)
S(i).E=Eo;
S(i).ENERGY=0;
plot(S(i).xd,S(i).yd,'o');
hold on;
end
%Random Election of Advanced Nodes
if (temp_rnd0<m*n+1)
S(i).E=Eo*(1+a)
S(i).ENERGY=1;
plot(S(i).xd,S(i).yd,'+');
hold on;
end
end
S(n+1).xd=sink.x;
S(n+1).yd=sink.y;
plot(S(n+1).xd,S(n+1).yd,'x');
%First Iteration
figure(1);
%counter for CHs
countCHs=0;
%counter for CHs per round
rcountCHs=0;
cluster=1;
countCHs;
rcountCHs=rcountCHs+countCHs;
flag_first_dead=0;
for r=0:1:rmax
r
%Operation for epoch
if(mod(r, round(1/p) )==0)
for i=1:1:n
S(i).G=0;
S(i).cl=0;
end
end
hold off;
%Number of dead nodes
dead=0;
%Number of dead Advanced Nodes
dead_a=0;
%Number of dead Normal Nodes
dead_n=0;
%counter for bit transmitted to Bases Station and to Cluster Heads
packets_TO_BS=0;
packets_TO_CH=0;
%counter for bit transmitted to Bases Station and to Cluster Heads
%per round
PACKETS_TO_CH(r+1)=0;
PACKETS_TO_BS(r+1)=0;
figure(1);
for i=1:1:n
%checking if there is a dead node
if (S(i).E<=0)
plot(S(i).xd,S(i).yd,'red .');
dead=dead+1;
if(S(i).ENERGY==1)
dead_a=dead_a+1;
end
if(S(i).ENERGY==0)
dead_n=dead_n+1;
end
hold on;
end
if S(i).E>0
S(i).type='N';
if (S(i).ENERGY==0)
plot(S(i).xd,S(i).yd,'o');
end
if (S(i).ENERGY==1)
plot(S(i).xd,S(i).yd,'+');
end
hold on;
end
end
plot(S(n+1).xd,S(n+1).yd,'x');
STATISTICS(r+1).DEAD=dead;
DEAD(r+1)=dead;
DEAD_N(r+1)=dead_n;
DEAD_A(r+1)=dead_a;
%When the first node dies
if (dead==1)
if(flag_first_dead==0)
first_dead=r
flag_first_dead=1;
end
end
countCHs=0;
cluster=1;
for i=1:1:n
if(S(i).E>0)
temp_rand=rand;
if ( (S(i).G)<=0)
%Election of Cluster Heads
if(temp_rand<= (p/(1-p*mod(r,round(1/p)))))
countCHs=countCHs+1;
packets_TO_BS=packets_TO_BS+1;
PACKETS_TO_BS(r+1)=packets_TO_BS;
S(i).type='C';
S(i).G=round(1/p)-1;
C(cluster).xd=S(i).xd;
C(cluster).yd=S(i).yd;
plot(S(i).xd,S(i).yd,'k*');
distance=sqrt( (S(i).xd-(S(n+1).xd) )^2 + (S(i).yd-(S(n+1).yd) )^2 );
C(cluster).distance=distance;
C(cluster).id=i;
X(cluster)=S(i).xd;
Y(cluster)=S(i).yd;
cluster=cluster+1;
%Calculation of Energy dissipated
distance;
if (distance>do)
S(i).E=S(i).E- ( (ETX+EDA)*(4000) + Emp*4000*( distance*distance*distance*distance ));
end
if (distance<=do)
S(i).E=S(i).E- ( (ETX+EDA)*(4000) + Efs*4000*( distance * distance ));
end
end
end
end
end
STATISTICS(r+1).CLUSTERHEADS=cluster-1;
CLUSTERHS(r+1)=cluster-1;
%Election of Associated Cluster Head for Normal Nodes
for i=1:1:n
if ( S(i).type=='N' && S(i).E>0 )
if(cluster-1>=1)
min_dis=sqrt( (S(i).xd-S(n+1).xd)^2 + (S(i).yd-S(n+1).yd)^2 );
min_dis_cluster=1;
for c=1:1:cluster-1
temp=min(min_dis,sqrt( (S(i).xd-C(c).xd)^2 + (S(i).yd-C(c).yd)^2 ) );
if ( temp<min_dis )
min_dis=temp;
min_dis_cluster=c;
end
end
%Energy dissipated by associated Cluster Head
min_dis;
if (min_dis>do)
S(i).E=S(i).E- ( ETX*(4000) + Emp*4000*( min_dis * min_dis * min_dis * min_dis));
end
if (min_dis<=do)
S(i).E=S(i).E- ( ETX*(4000) + Efs*4000*( min_dis * min_dis));
end
%Energy dissipated
🎉3 参考文献
文章中一些内容引自网络,会注明出处或引用为参考文献,难免有未尽之处,如有不妥,请随时联系删除。
[1]李成岳,申铉京,陈海鹏,等.无线传感器网络中LEACH路由算法的研究与改进[J].传感技术学报, 2010, 23(8):5.DOI:10.3969/j.issn.1004-1699.2010.08.024.
[2]李芳芳,王靖.一种基于LEACH协议的无线传感器网络路由算法[J].传感技术学报, 2012, 25(10):7.DOI:10.3969/j.issn.1004-1699.2012.010.023.
[3]谢冬梅.无线传感器网络LEACH路由协议的研究[D].河海大学[2024-04-02].DOI:10.7666/d.y1030974.
[4] W.R.Heinzelman, A.P.Chandrakasan and H.Balakrishnan, "An application-specific protocol architecture for wireless microsensor networks" IEEE Transactions on Wireless Communications, 1(4):660-670,2002