mpls实验

要求：全网通

部分代码

1. isp

1. ip可达
2. 建立bgp邻居关系
3. 启用mp-bgp 也就是mpls
4. bgp传递社团属性

        [r2]bgp 100

        [r2-bgp]ipv4-family vpnv4

        [r2-bgp-af-vpnv4]peer 5.5.5.5 enable

        [r2-bgp-af-vpnv4]peer 5.5.5.5 next-hop-local

1. 在pe上创建虚拟空间

        [r2]ip vpn-instance 1

        [r2-vpn-instance-1]route-distinguisher 1:1

        [r2-vpn-instance-1-af-ipv4]vpn-target 1:1 export-extcommunity

         EVT Assignment result:

        Info: VPN-Target assignment is successful.

        [r2-vpn-instance-1-af-ipv4]vpn-target 2:2 import-extcommunity

        IVT Assignment result:

        Info: VPN-Target assignment is successful.

        绑定在连接ce的接口

        [r2]interface g0/0/0

        [r2-GigabitEthernet0/0/0]undo ip address

        [r2-GigabitEthernet0/0/0]ip binding vpn-instance 1

        [r2-GigabitEthernet0/0/0]ip address 12.1.1.2 24

        pe上进行rip宣告

        在ce端正常启动rip

        [r8]rip 1 vpn-instance 3

        [r8-rip-1]version 2

        [r8-rip-1]network 12.0.0.0

        ospf

        [r7]ospf 2 vpn-instance 2

        [r7-ospf-2]area  0

        [r7-ospf-2-area-0.0.0.0]network 57.1.1.2 0.0.0.0

        双向重发布

        [r8]bgp 100

        [r8-bgp]ipv4-family vpn-instance 3

        [r8-bgp-1]import-route rip  3

        [r8]rip 1 vpn-instance 3

        [r8-rip-1]import-route  bgp